FINALLY! I can just grab my drill, some screws, some baking soda, a syringe, a D battery, and some gorilla glue to make a lighter that barely lights, and could potentially explode, instead of wasting 2 bucks on a new one!

@Brocuzgodlocdunfamdogson

2 жыл бұрын

Actually, they sell those lighters like the one shown here for $0.50. They’re dirt cheap, all the more reason to just buy one instead😂😂

@rollin_dat_gas6498

2 жыл бұрын

@@Brocuzgodlocdunfamdogson it's only 25 cents where I live

@perhapsavailable

2 жыл бұрын

With that intellect, that's definitely the better option ;)

@twobarrells

2 жыл бұрын

Free where I live,nic them!

@randomhooman1952

2 жыл бұрын

@@rollin_dat_gas6498 10 in my country

I did use the duct tape backing on sand paper. That one I will give a thumbs up.

@TherealTenmanI

Жыл бұрын

seems like the only actual tip in the video.

@lancerevell5979

Жыл бұрын

I once used some duck tape and a bore patch as a makeshift bandaid at the shooting range. 😀

@adamfirst9321

Жыл бұрын

@@lancerevell5979 There’s a video from long ago where the guy patched up half the fuselage on a Plane with Duct-tape…. and flew back home. it’s a looker.

@secondchance6603

Жыл бұрын

@@adamfirst9321 If I remember correctly, Myth busters made a boat out of Duct tape.

@misterhat5823

Жыл бұрын

That might be the only tip in the video.

How many opened the video to just watch the lighter hack and now feel like being cheated 😒

@user-fh1rl7op2c

10 күн бұрын

🙄

@joesmith4981

8 күн бұрын

It's enough to light a cigarette at least

The part that cracks me up is where he spends all that time to mod that sketchy lighter and then on the next object he uses a completely different lighter 🤣

@jamesthomas8481

Жыл бұрын

Although that lighter was pretty cool. It would prolly cost me more to build that sucka then to just go buy a new one. But good trick if im out in the boondocks.

@RobotronSage

Жыл бұрын

Man literally built a portable ionizer it's actually pretty neat

@walkinaxyl

Жыл бұрын

It’s a damn hydrogen bomb! Don’t play with it near an open flame kids! Although, the plastic of the lighter would start to melt.

@jamesthomas8481

Жыл бұрын

@@walkinaxyl who's playing? I'm serious enough to upscale this idea to epic proportions. Then it's uses as fuel is of interest.

@frikkiesmit327

Жыл бұрын

@@walkinaxyl oh lighten up ! 🤣

That lighter "hack" is a really long walk for a short drink of water. 😂😂

@facebookgamer7403

2 жыл бұрын

kzread.info/dash/bejne/oYWZrK2vqc21YJc.html

@fzsamikhan2350

2 жыл бұрын

Hi is video very useful kzread.info/dash/bejne/Y2iFydyGc5Cxl5c.html

@elementalist1984

2 жыл бұрын

Seems like it would be easier and cheaper to just buy another lighter

@saiyanz6734

2 жыл бұрын

Everything on this channel is bro

@stevereaves6757

2 жыл бұрын

Yep. I feel like comparing my handyman technique and videoing it, which would be a video of me driving to Dollar General 5 minutes away and buying a lighter. Problem solved.

I’m a handyman, thank god no one knows about the glass coke bottle trick! My business would go under!

@MegaMato

Жыл бұрын

What do you do with half a bottle?

@bradsmith4279

Жыл бұрын

How about the start a fire with a pencil and a USB cord trick? Or the I should probably just go buy another lighter since I used glue that costs more than a new lighter trick?

@dylanstevens5714

Жыл бұрын

@@MegaMato sarcasm

@MegaMato

Жыл бұрын

Yeah but I'm sincerely asking what one would do with half a bottle. There must be something.

@dylanstevens5714

Жыл бұрын

@@MegaMato use it as a cup 🤷🏽‍♂️

Cool tricks to make small jobs take longer!

@aitalimbu-cc2es

Жыл бұрын

Rfyduf😇😇😇😇😇😇😇😊😊😊

I started doing the lighter hack... Noticed the electrical arcing in my drill... Used that to light my joint... Thanks for the tip.

@RobotronSage

Жыл бұрын

lmfao

When I saw my handyman hook my refrigerator up to a pencil, at first I was skeptical, but then he referred me to this video and I've been assured that he's a professional after all.

@loismendelsohn3210

Жыл бұрын

😅😅

@adheeshburthia3584

Жыл бұрын

🤣🤣

@kaapivineokey1012

Жыл бұрын

😂😂😂😂

@janahendrix458

Жыл бұрын

Hahahaha! 😆❤️I love it! So funny 😘🤣

@impishlyit9780

Жыл бұрын

You misunderstand, the pencil isn't being used to transfer charge. The graphite is a good resistor, so they're using it to generate heat to use a soldering iron. Actually a pretty cool trick for if you're lacking the actual tool.

As a handyman, I CANNOT BELIEVE YOU TOLD EVERYONE EXACTLY WHAT I DIDN'T WANT THEM TO KNOW!!!

@Gairith

Жыл бұрын

🤣

@j.r7872

Жыл бұрын

Haaa!

@vespadavidson2315

Жыл бұрын

You arse.! 👍👍👍

@nofatchicks2315

Жыл бұрын

Welcome to the unemployment line

@bowm0

Жыл бұрын

@@nofatchicks2315 🤣🤣🤣

Solutions for problems that don’t exist…yet I kept watching. 🤗

@misterhat5823

Жыл бұрын

Clickbait reeled ya in.

@user-fi8hq8ze8v

Жыл бұрын

You re a plank

I also noticed something, it’d make far more sense for your “handyman”, or contractor, to want you to know these. So they can charge you thousands of dollars to repair the explosion you created in your home.

@hermeuscomplete1779

Жыл бұрын

Lol ur So Right

@tregaricus00

Жыл бұрын

that cracked me up 😆

@dabob2652

Жыл бұрын

Lol

@erivaldosatiro7190

Жыл бұрын

5_5

@BreakingElegance

Жыл бұрын

Lmfao

My handyman would be so mad if I learned how to partially fix a lighter. Thank you!

@forgeteverythingyouknow5413

8 ай бұрын

I don't often LOL... ty

Finally! I can stop paying a handyman to cut my Coke bottles in half.

@abdulhassan1107

2 жыл бұрын

Think about it, it gives you an idea how to make your own bong or chellum 😉

@digitalphoenix72

2 жыл бұрын

I was just going to make this comment when I came across yours. This video just seems like somebody curious and testing different things out. I wonder if he can show me how to repair a truss easily.

@morganmlaidd

2 жыл бұрын

YES!!!

@odannyboy3338

2 жыл бұрын

LOLOLOLOLOLOL I know right! These vids are entertaining, but it takes 3 weeks in the real world to make his contraptions!

@carefulcarpenter

2 жыл бұрын

People don't need handymen any longer. The Electrical Engineer can do anything on the three-day weekend. Let's see: make $100k to $400k for the Man; make $10/hr on weekends.

I watched my grandfather in Pennsylvania cut tops off glass gallon jugs this way using kerosene & string. When the fire burned out, he tapped lightly around the string line with a small hammer. The top usually broke off clean. He put the body of the jug upside down over his rose bushes to protect them through the winter. I loved that ol’ guy!

@bobmcnoodler270

Жыл бұрын

I'm going to try it one day but I can't even cut flat cheap window glass with a 25 dollar glass cutter so I doubt if I can do it but it won't stop me from trying

@EmmAyeVee

Жыл бұрын

@@bobmcnoodler270 you dont even need kerosene. Ive done it with isopropyl alcohol, string, bucket of cold water and glass beer bottles.

@XiaolinDraconis

Жыл бұрын

@@a.k.3659 say next time ”as old as you are I doubt that bush still blooms” That, or plow her garden like a professional.

@donnienicholson6062

Жыл бұрын

You can also use a glass cutter but that's too easy.

@donnienicholson6062

Жыл бұрын

@@bobmcnoodler270 You're being too careful.Score the glass and slap it apart like you don't care if it breaks.

You don't need to drill holes in wood to twist wire with a drill. You can just put the wire's directly into the chuck of the drill.

@stinkyham9050

Жыл бұрын

You could just use linesman pliers since that's what they're actually made for.

@carlvegeiii3756

Жыл бұрын

I'm an electrician of 27 year if you twist wire long enough calluses will build up enough you can twist # 12 solid wore with your bare hands just as nice and neat.

@joestalin2375

Жыл бұрын

@@carlvegeiii3756 I strip wire with my teeth

@Mooncricketstinks

Жыл бұрын

@@joestalin2375 your dentist will love that. Enamel is too fragile to monkey with as a tool. Plus if you damage them you can't fix them properly.

@anthonylepore516

Жыл бұрын

Or you could go for broke, and use a pair of pliers! Oops sorry let that one slide 😮😮

Channels like this are made to hasten the distribution of Darwin awards. Keep it up. 👍

I showed this video to my handyman and he started crying.

@Samuelfish2k

Жыл бұрын

What a wuss

@your_name_here_1

Жыл бұрын

I sure did knowing somebody gonna set their house on fire

@shejmacfyoutuization

Жыл бұрын

😅

@Pteromandias

5 ай бұрын

They go by "handyman's" these days.

That's a great way to fry your usb adapter, Shorting the leads to make that soldering iron tip heat up requires a ton of current. Even on the lower power end, a soldering iron would require 20W to be dissipated. From a 5 volt usb supply that would mean 4 amps of current is required, when most usb adapters are rated between 1 and 3 amps. This is disregarding power losses throughout the length of the tip and contact resistances at the terminals.

@johncheetham7789

Жыл бұрын

It doesn't make sense why anyone would consider making one when you can buy one.

@MunyuShizumi

Жыл бұрын

Nah, the adapter is absolutely safe. That weensy cable will catch fire long before the adapter does, it's actually doubling as a fuse. :P

@jackburton3212

Жыл бұрын

@@MunyuShizumi that's if the lead in the pencil doesn't break first. I can't write with such a long tip let alone attach hardware to it 🤣

@jaapvanveen3203

Жыл бұрын

6

@hinspect

Жыл бұрын

Great way to F¿ck up a USB port in a hurry, at least install a fusible link

3:03 **Sitting in class** Cute girl: do you have a pencil I can borrow? This guy: it's complicated

As someone who has seen a lighter explode when chucked at the ground, that seems like an awfully dangerous project to do when you could just buy a refillable lighter.

@johnree6106

2 жыл бұрын

Yes or refill a lighter like that with butane used to refill refillable take off silver cap and don't remember exactly how but seen it done.

@xXVintersorgXx

2 жыл бұрын

It's a cool experiment though. He's basically making a hydrogen lighter

@Biggus_Diggus1

2 жыл бұрын

its the science behind it that i believe that is what is trying to be conveyed.

@Hidyman

2 жыл бұрын

@@xXVintersorgXx Actually, it is Brown's gas.

@stripedassape8148

2 жыл бұрын

.05 mm of flint on that lighter it will stop sparking before it runs out of butane and the screws cost more than the lighter I didnt watch just commenting on the thumbnail lol

The duck tape and sand paper is a pretty good idea have to remember it

@fzsamikhan2350

2 жыл бұрын

Hi is video very useful How to make mini Rocket experimant kzread.info/dash/bejne/Y2iFydyGc5Cxl5c.html

@Cornz38

2 жыл бұрын

It's about the ONLY useful tip here. The rest of it is utter garbage.

@ericscaillet2232

2 жыл бұрын

Perhaps ,but garbage executive.

@firebladex8586

2 жыл бұрын

That was the only useful one

@Cornz38

2 жыл бұрын

@@ericscaillet2232 No, just clickbait, algorithm registering clickbait.

I was at home trying to watch this video when suddenly some handyman's kicked down my door and slammed my laptop shut. They told me they don't want me to know the forbidden secrets of the sacred order of the handyman's. I would like to watch this video but they threatened to come back and shut my laptop again. I'm afraid of the handyman's.

@countk1

Жыл бұрын

"(Don't fear) the handyman" was the working title of the famous song by Blue Oyster Cult

@ninetydegreeplanet

Жыл бұрын

@@countk1 I'd love to see how they would have made a cowbell with a pencil, some bleach, a drill and some hedge trimmers

@countk1

Жыл бұрын

@@ninetydegreeplanet I guess you have to ask Bruce... ;)

@mutashim123

Жыл бұрын

😂

@goldeneddie

Жыл бұрын

DON'T MAKE ME COME ROUND THERE AGAIN!!!

Always wanted a rechargeable lighter... So I bought one!

I'm reminded of advice by Father Guido Sarducci, who said you can make an emergency umbrella with a garbage bag, a hulahoop and a stick. "So if it's raining and you don't have an umbrella, but you do have, you know, a garbage bag, a hulahoop and a stick....".

@LuxAudio389

2 жыл бұрын

Guido Sarducci: Now that's a name! 🤌🇮🇹

@Cigarsnguitars

2 жыл бұрын

I can hear this response, complete with accent, in my head. Thx for the guffaw!

@Janderlie13-ik8rc

3 ай бұрын

I'm glad someone remembers Sarducci! Wow you could just use a pliers to twist wires together!

“We only have 5 seconds, MacGruber!” “Ok, hand me a pencil, that USB adapter …”

The soldering iron was amazing! I didn't suspect at all that's where you were going with all that, I may actually try that one myself! Thanks!!!

Love the soldering iron great idea but you must get the wires round the right way to make it work.😊

The hydrogen lighter was lit.😄

@scarekrooo2489

Жыл бұрын

It sure was

@richdelaney9500

Жыл бұрын

Lit erally

The definition of spending a minute to save a second

“Great, I now know how to split a glass coke bottle” said no one ever

@jec020468

Жыл бұрын

I'd be more interested in where he got a glass Coke bottle.

@pippendog1

Жыл бұрын

Good way to make a set of glass tumblers .

@Pteromandias

5 ай бұрын

Except handyman's. How do you think handyman's became so handy? Half bottles, that's how. You will never be a handyman's if you can't see this.

Can we just respect the fact that this guy had some cool ideas that actually work, and was willing to share them with us? Why does everyone have to be so negative?

Boy oh boy, if my handyman found out I figured out how to make a soldering iron out of a pencil, piece of wire, and a usb connector…. He’d be soooooo pissed!

@your_name_here_1

Жыл бұрын

I'm pissed as a handyman that I have been using quality store bought soldering irons. when I could have been making a superior one with just a pencil broken charger and a piece of copper wire.

@1badombre82

Ай бұрын

For real . I feel like a dummie for spending $12 on 1 the other day

That pencil soldering iron was pretty cool

@larryloyd2989

2 жыл бұрын

Yeah cool until you get electrocuted definitely would have to tape up the bare wire areas to keep that from happening

@MT-sb6ms

2 жыл бұрын

If your charger can handle it without blowing up. The resistance of the small graphite section will be way too low for most

@giovannimatrullo7929

2 жыл бұрын

@@MT-sb6ms .

@briandeeley1599

Жыл бұрын

@@MT-sb6ms Yeah it won't last very long that is for sure and why go through the trouble?

@youtubR72

Жыл бұрын

Seemed very risky way to solder

Thanks mate, my soldering iron works great:)

A far simpler and easier way to twist wires is if you have a keyless chucked drill, put both, or as many as you need, into the Chuck, tighten it down, and spin! I used that all the time doing car stereo installs. No need to drill out a piece of wood. And if you’re able to drill out the wood, then you’ve clearly already got the drill. Try it!

@1883GotDown

Жыл бұрын

Agreed lol I do that in my channel all the time

@Butchsiek

Жыл бұрын

I use a drill as you say, OR Safety wire pliers..

@lordwolf76

Жыл бұрын

Or a small Shepard's hook of like t-grid wire, chucked up in the chuck. You don't have to chuck and unchuck. You just spin, pull off, move to next set.

@SeeDaRipper...

Жыл бұрын

What's *even* simpler is using a pair of bloody pliers🙄

Who are these handymen that don’t want us to know these secrets??? How can we punish them?? I suggest we make a lot of crazy Vic lighters to show them who’s the boss!

@SICresinwrks

2 жыл бұрын

Thats exactly what i was thinking

@doctorlefthandthread

2 жыл бұрын

And how did inventor 101 find out?? The intrigue 🤔 is overwhelming

@kerrygibbs8198

2 жыл бұрын

Uggg!!! This is a deeper problem than I thought!! Lol

@your_name_here_1

Жыл бұрын

how are all our secrets getting out! who is the masked handyman?😂

The lighter will build up pressure of both hydrogen and oxygen, turning it into a bomb if left on the battery for long enough.

@jackdurden466

Жыл бұрын

Now that’s a good idea! Leave it plugged in someone you don’t likes car cigarette lighter port, and BOOM!!

@vickythefist7062

Жыл бұрын

Thought the same thing. Might do it then sue you tube saying they told me it was safe

@ChloesColdEars111

Жыл бұрын

that will be on the next hack video, how to McGyver a lighter bomb with a battery a bit of wire and some baking soda and screws.

@1badombre82

Ай бұрын

I would hardly call a lighter 10 percent filled with hydrogen and oxygen and 90 percent water a bomb.

This is handyman john wick. He soldered using an effin pencil... AN EFFIN PENCIL!

@chikkenbonz

Жыл бұрын

Yeah that one was pretty cool.

Best soldering iron ever😍

If your handyman uses any of these 'hacks' he himself is a hack!

@jamIam6548

2 жыл бұрын

Most handymen are

@2WheeledMafia

2 жыл бұрын

Hey the pencil soldering thing is pretty cool. Just for shits and giggles of course lol

@tseikkisnelkytkaks9013

2 жыл бұрын

Very much so. All of them are more trouble than they are worth, some downright dangerous. Hack a staircase into existence, then the handyman might be scared :D

@christiaanvorster1988

2 жыл бұрын

😂

@sammy1kenobi354

2 жыл бұрын

What do you have against strengthening sandpaper with duct tape?

Wow. He invented some type of iron for soldering. If only something was available on the market.

@daleyfun2247

2 жыл бұрын

Maybe on that didn't break the second you look at it.

@TheMightyMidge21

2 жыл бұрын

@marcpalac 🤣 you got here before me, still super cool though. One day I’ll actually try a few of these

@kevinbean3679

2 жыл бұрын

I was about to remark that it better be a thick pencil, as the carbon could break off at any time in the assembly of your new pencil solder iron

@michaniewiadomski7911

2 жыл бұрын

Yeah, right? Something like TS-80 or TS-100, for instance.

@The_Moe_Szyslak_Exp_feat_Homer

2 жыл бұрын

TONY STARK WAS ABLE TO BUILD THIS IN A CAVE!!! WITH A BOX OF SCRAPS!!

Good luck getting through an airport with that Bic lighter.

The reason handymen don't want you to know this is because literally every 'Tips & Hacks' that was shown was just a really inefficient way to go about it

@mikejones-vd3fg

2 жыл бұрын

youre saying working 1 hour at mcdonals to buy a cheap solder iron is more efficient then making one out of household products? hmmm maybe , but then you gotta write a resume, apply a bunch of times, buy some clothes, wake up couple hours early , or you could have just turned that pencil and wire on your desk into one...? i dunno... close call.

@raimbaalgaming1226

2 жыл бұрын

That and most of them literally either have zero purpose or just proving how much effort someone will go through so they don’t spend $1. Click bait.

@MrChrisgilbert1977

2 жыл бұрын

let's all hope nothing happens to tech that we dont need to be learning these things.

@death-by-ego

2 жыл бұрын

What do you mean? Making a custom wood bit for your drill to twist 2 over stripped wires and leaving them exposed is much more efficient than a wing nut

@chrismccolm9341

2 жыл бұрын

@@mikejones-vd3fg bahaha! That was great 😂

Damn those handymen's with their secret knowledge!

Excelent inventions And Clever TIPS!🥳

As a handyman, *I'M FURIOUS* that you know this.

That was certainly a way to solder... I'll stick with an actual soldering iron

Super, wie immer einfach genial. Thanks

@facebookgamer7403

2 жыл бұрын

kzread.info/dash/bejne/oYWZrK2vqc21YJc.html

@fzsamikhan2350

2 жыл бұрын

Hi is video very useful kzread.info/dash/bejne/Y2iFydyGc5Cxl5c.html

That lighter 'tip' had me laughing SO HARD... Sorry, can't type, still laughing. SO ABSURD.

This is so awesome!!! As a goldsmith this makes a terrific wax pen for grillz etc. Thankyou!!!!

2:50 all that work and barely any flame

We actually need a simple trick that can be applied in real life scenario.

@Avalanche272_

Жыл бұрын

I gotchu homie: piece of aluminum foil + battery = fire for emergencies.

@countk1

Жыл бұрын

@@Avalanche272_ add a pin up poster to it and you've got wood for days :p

That lighter one was cool

Excuse me, handyman. My roof collapsed. Handyman shows up with a pencil and USB cable.

@aarondavis5386

Жыл бұрын

To be fair if your roof collapsed you'd probably want a team of carpenters and roofers

Yo that pencil soldering iron is on some Tony Stark levels brah.

😳 that's an awful lot of work for a disposable lighter

@billp4

2 жыл бұрын

and for a soldering iron.

@bikemannc

2 жыл бұрын

Well in an extreme situation that soldering is worth knowing!

@sjb2oak

2 жыл бұрын

You'll be happy you watched this video if you ever get lost in the jungle and all you've got with you is an empty disposible ligther... A drill, two screws, a screwdriver, some baking soda, water, a syringe, superglue and a 9v battery...

@Stuntman87

2 жыл бұрын

😆 🤣

@greenyeyeshaley

2 жыл бұрын

@@sjb2oak 🤣🤣🤣🤣👍

Soooooo many things in such short time!!!! *All* of them useful. Thank you!

Now I know how to give my $1.69 lighter a second life. All I need is: $0.32 screws, $0.97 baking soda, $7.99 mini bench vise and $5.54 9v battery. p.s. I can borrow screwdriver from my friend or use dime because finger nails don't work

Take it from a 20 year experience handyman... ........if my lighter suddenly stops working, I simply just ask someone if I can use theres

@mikeholmes3203

2 жыл бұрын

I just go to my truck, still have a lighter in mine

@syckles

2 жыл бұрын

Youre a disgrace to handymen everywhere who pop out of the shadows to bait clients with the line "need a light?"

@your_name_here_1

Жыл бұрын

I just pull out the map\pro torch or my micro torch 😂 edit: I forgot the heat gun.

@allwrighty100

Жыл бұрын

*theirs

The comment section of this video is more valuable than the video itself.

Wow! Now I am a pro!! 😍😎😍😎

Assalamu Alaikum. I am a student of EEE department. I🧡 have watched all the videos from your youtube channel and I am waiting for new videos every day. ❣️ I like the videos a lot. Love is endless from Bangladesh. 🇧🇩

@asifshort251

2 жыл бұрын

Walaikum salam.IM Also From 🇧 🇦 🇳 🇬 🇱 🇦 🇩 🇪 🇸 🇭

What is the liquid going into the lighter..... water?

@johnsmith-ce2tq

Жыл бұрын

water and bi carbonate ( baking soda )

The sense of humour and wittiness in the comments makes my day 😂😂😂😂

I can't believe I watched this whole thing.

yes, cause im sure my handyman doesnt want me to know how to cut a coke bottle in half

The lighter hack was too much effort for too little worth..........but, the soldering pencil was very cool and interesting; provided u find a powerful enough source of current for it. Anyways ur videos are very entertaining and informative. Keep it up 👍

@chuckholmes2075

2 жыл бұрын

it won't last it's too bulky the graphite will melt and/or break as the slightest torque.. and it's 5 volts at no more than 2 amps. no way that'll get up to 450 to melt 40/60

@Hidyman

2 жыл бұрын

@@chuckholmes2075 How does this melt graphite? Graphite doesn't melt at atmospheric pressure, is sublimates at 6254 degrees F. (3457 C)

Wonderful! There are so many ideas, and they're all realized. A new discovery!

When my lighter craps out, I'll go to kitchen matches.

Thanks for showing me why I'd rather buy this thing! Thumps up!

Perfect for that moment when you need half of a coke bottle... for some reason.

Everyone: Handyman tips: *Cuts sandpaper with scissors*

بارك الله فيك وحفظك أينما كنت سيدي

That's amazing. The soldering Iron from a leaded pencil. Amazing channel and great "tips"

Finally, I can now join the A Team and use my skills as a CV

That last one!!!🔥🔥🔥

That last one was pretty impressive

I have a very nice soldering iron , thanks anyway

You made me jobless as handyman !!!

This is so helpful, I don't know how many times I've thought, I wish there was an easy way to cut an empty Coke bottle in half.

Informatif bang, terimakasih berbagi ilmunya lagi

Absolutely great❤️

@Inventor101

2 жыл бұрын

Thank you!!

@facebookgamer7403

2 жыл бұрын

kzread.info/dash/bejne/oYWZrK2vqc21YJc.html

@fzsamikhan2350

2 жыл бұрын

Hi is video very useful kzread.info/dash/bejne/Y2iFydyGc5Cxl5c.html

The soldering iron is a great idea!!! Just dial 9,and 1 in your phone and be ready for the last 1

@XiaolinDraconis

Жыл бұрын

I've seen soldering done with nothing more than a bic lighter. Folding the finger guard up and over the flame. Inmates are way more efficient with these hacks.

Exelent,,, really exelent.. Thanks for the tips..

Other than cutting the glass bottle This is more like a video of how people do things that don't have the proper tools but are creative AF 🤣😂🤣

@1badombre82

Ай бұрын

And the glass bottle trick almost never works

Since I can't find a glass coke bottle to try the trick on, I'm thinking about using a full bottle of Crown Royal. 🤔 Then again on second thought...

This guy has a lot of time and meth on his hands but still pretty cool what he comes up with😆😂

@sekovittol3124

Жыл бұрын

He seems to excel in methematics.

@dimsum9025

Жыл бұрын

@@sekovittol3124 😜🤣🤣🤣

@matthewlivermanne4441

Жыл бұрын

Lol exactly

Wow. You would be PERFECTLY useful in a zombie apocalypse. You're like Eugene Porter.

Yeah that soldering iron makes so much sense Lololol of course, the wood at the pencil end didn't heat up at all 😂😂😂😂

When I showed my handy man this he smashed my computer and ran off because he knew the jig was up.

@LuxAudio389

2 жыл бұрын

Then he fixed it with a pencil and USB plug. 🤣

This is the type handyman that's coming back and cutting all the Copper out if your new house at 230 am

My dad is a handyman and I asked him how he feels now everyone knows? He hasn't been able to get out of bed for the last fortnight.

They all legit 😂 but tha last one 🔥

I will Just get another five pack of lighters for a dollar

Wow! A do it yourself soldiering iron! Brilliant!

@facebookgamer7403

2 жыл бұрын

kzread.info/dash/bejne/oYWZrK2vqc21YJc.html

@fzsamikhan2350

2 жыл бұрын

Hi is video very useful kzread.info/dash/bejne/Y2iFydyGc5Cxl5c.html

As a handyman myself I have never needed to rig up anything i just watched on a job site. Maybe if I start charging by the hour i could retire early by making my own tools on the job.

@inventor1978

2 жыл бұрын

Feel you have real talent, please create a Channel To post videos for everyone to enjoy!thanh you!

@billlajoy3374

2 жыл бұрын

@@inventor1978 🤣

@scarekrooo2489

Жыл бұрын

Macgyver services, you called to get a job done Um... Where are your tool? Tools, ha!

my village has many thanks for your genius solutions. finally, fire derived from ordinary item reachable. ability of melt metal is magic new, us here. learned new accomplished, we've. may Sun smile upon your flesh.

Hallelujah Wished We Would've Had Knowledge About This Along Time Ago Amen ❣️

Pencil soldering iron, I love it

@juliemonarch7364

2 жыл бұрын

Doesn't pass inspection. No flow, need flux.