Anyone selling a drag pack? Lol

@chaseperry1524

4 жыл бұрын

Jacob R. Doty first like💯

@aarontimothybristol

4 жыл бұрын

Those tires with chips in them did you take the car to a automatic carwash?

@marshalleng1933

4 жыл бұрын

I have welds for my 13 gt with slicks. If you wanna purchase them

@marshalleng1933

4 жыл бұрын

15x10

@spruce232

4 жыл бұрын

black race stars with M/T et street r 28x11.5x17

Hey man you didn’t get jipped I had the same problem with mine all you need is the extended lug nuts with washers. Dm me on ig @ Dominator5.0 for mor info I’ll tell you all about it my man.

@Kelo64244

4 жыл бұрын

Did he Ever Message you?

@Kb_2v

4 жыл бұрын

Blodørn he’s right they’re offset lug nuts that correct and center the wheel I guess they do it to save money

@Kb_2v

4 жыл бұрын

Blodørn my cousin had the same problem you need to buy they’re lug nuts

i had the same problem.. you have to get them machined down so they fit. i did that and now they fit fine with zero problems

Btw the sawzall was fighting you soo much because you had a Wood blade lol youd want a fine tooth metal blade.

How sad bro you called the guy that sold you the right wheels a scammer your the one that needed to get your research did before getting race stars 🤷‍♂️

In order to put on any drag wheels you need extended wheel studs and the right wheel lug nuts 👍💯

@johnlucero4882

3 жыл бұрын

No for SVE they sell the long lugs to fit the regular wheel studs

I've had an inside curb problem on my rims before but I found out it was a drive thru carwash

Love your intro brotha, good content! Hope you find the drag pack you're looking for.

once you get the suspension nailed down, go get a FOUR wheel thrust alignment and set the front suspension caster/camber to the KR500 specs. It totally transformed my car, I immediately felt the limit on grip making fast turns and with the rear axle square with the chassis it makes the hole shot easy to slip it right on the money and lower 60 ft times. My GT500 has the Ford SVT racing suspension under it and it is tame when driving around and when I shift at 100 it breaks traction but stays straight, Same goes for my '12 GT. The way the 3 point suspension is nailed it transforms the driving experience. Keep it out of the ditches.... oB

Drive through car wash can rub the inner wheel. I'd also check the balance of the driveshaft if you are getting high speed vibration.

You need longer wheel studs and get the racestar lug nut kit with the offset washers and they’ll work just fine

Im ready to do mine maybe this monday, got some Mickey radials 295/55r15

"And we're bonding." 😂😂😂😂

Use a thicker blade when cutting helps a lot tbh learned the hard way. Some even say what they are for And how thick they can cut w/o hesitation

10:44 "And we're bonding" 😭😭😭

I got 15x8 / 5x114.3 with a back spacing 4x5 , weld racing brands , go with some welds

How much are you asking for them?? I've been looking for drag pack for my camaro.

Say bro just curious did you get the racestar hub-centric rings for the wheel's? I have a set of racestars for my 11 GT they didn't fit right without them and you'll need the shanks style lug-nuts.

Get a whiteline rear sway bar it relocates to the rear axle tube. Much better for your set up

Oscars face ahah 8:50 hahaha

Lucky ive been loking for some 5x120 drag pack

The first hit in the dyno before he sat in the trunk, maybe it wobbles and it the edge of the dyno?

I seen you post on anything coyote looking for drag packs. I noticed the car before the name 🤷‍♂️

Dynojets do rear high. Thats probably why people were saying stuff. Mustang Dynos read about 12-15% lower.

@jfiler21

4 жыл бұрын

Blake's Garage facts!

@midnight347

2 жыл бұрын

Hes saying they were saying it was high even by dynojet standards. Yes mustang dyno read lower but his numbers seemed high even by dynojet standards.

Damn only if you were in Florida there were some race stars for $500 but just the back and it had slicks

Get the Forgestar D5s they look really clean

I know it's an old vid, but, you ever been through an automatic carwash with those wheels? They're known for doing that sometimes...

So calm about getting jipped! I’d be mad but respect you can keep your cool.

you need to buy a metal blade for that saw lol. Also, buy a torque bar.. You wouldn't snap bolts, and would more safely reassemble with proper torque on your bolts

Sounds fricken sweeeeet

Did it a lil complicated, was suppose to take the sway bar off then line it up and tighten it..

The more I watch these videos the more I want too keep my low mileage 2011 GT stock because in 10 too 20 years I want it too look as good as it did day I bought it there only new one time ... and it’s just as enjoyable with small reversible modifications ....👍✌️

@midnight347

2 жыл бұрын

Dude this is literally nothing lol. Once you mention you're getting a cutting tool out people freak out lol. Literally the ONLY thing it does is relocate the sway bar (in a more optimal place imo) which allows you to run 15 on the rear. If you install it right and spray it with black paint nobody will ever know it didn't come factory this way unless you really know mustangs it isn't gonna look all hacked up. Who cares if it's reversible there is literally no reason to go back to the stock way with this...if anything its in a more optimal place now. I understand not wanting to do insane none reversible mods but this is pretty tame and literally doesn't effect anything and nobody will ever know the difference. Yea man it's really gonna suck when Jacob looks back in 10-20 years and remembers when his sway bar used to be mounted 2 inches lower which made it where he couldn't run 15x10 drag wheels....too bad his dime a dozen (no offense intended) gt isn't factory stock anymore lol and the sway bar is 2 inches more toward the center of the wheel which is really more optimal if anything...its gonna suck knowing you can't go back and reverse this mod and put the sway bar back 2 inches down so you can't run 15s anymore lol. That is literally the only thing it effects.

I didnt realize how stock your suspension was, you should have all kind of wheel hop, and what not, is your upper control arm done

@JacobRDoty

4 жыл бұрын

Yes it is and no wheel hop. Suspension that I do have takes care of it

@negativesplits06

4 жыл бұрын

Jacob R. Doty When you put a bias ply slick and do a proper launch, it will squat like a mofo. You’ll need Viking shocks in the rear to help avoid that.

Sucks you got scammed be aware of grimey people , but glad u stayed positive and never gave up , cars looks amazing 🤯

Shoutout 😂😂👍🏼👍🏼

He didn’t lie to u race star first came out with these wheels and now have direct drill. There are washers and lugs u have to buy for them. I had the exact ones on my 07

@JacobRDoty

4 жыл бұрын

These don’t fit a washer or a lug nut so he lied lol. They’re rubbing on every stud going on. They do not fit.

@MaRCoS-pl7ht

4 жыл бұрын

Jim Mitchell wrong bolt pattern on these wheels. 5x120 are corvettes bmws and Camaros. Yes he needs the correct lugs and washers, but he was lied to

How much did you end up paying for that drag setup?

Nothing like cutting metal with a wood blade

Damn wish I had friends that help work on my stang. They just watch

RIP.

Wow! Too bad about the wheels. I need an "Oscar" that helps with my Mustang builds. Send him in a box, I will ship him back when I get my build finished...LOL!

That happened on the dyno most likely

You remind me of myself! Maybe we tightened it up!

I feel for you buddy, that sucks. Personally I'd find the guy who sold them and demand my money back and ask him why he lied to you. I'm sure you will be able to find the right ones. Good luck 😖🤝👍

Dude what are you still doing with the regular plate?, you MUST get the vintage plate or whatever they call it... The Black and Yellow one.... It's a must since that's your color theme.

@myxos

4 жыл бұрын

Personalized plate

@MNC012

4 жыл бұрын

@@myxos yeah, I had one when I lived in Cali, pretty neat. I am just disappointed that Cali is pretty much a car enthusiast paradise but with all the dumb laws makes it not fun. Now I live in a different state and my loud ass exhaust gets me a thumbs up and a nod from cops.

@chaseperry1524

4 жыл бұрын

Mlee302 GT TP yeah I live in North Carolina and they don’t care how loud your car is and what mods you have😂. It makes it more fun. Your definitely right.

If it’s 5x120 just change the spindle

looks like 5x115. some Pontiacs run that.

The disrespect from the seller smh

Check LMR’s EBay page. They have a few sets on there for fairly cheap

I need a hoodie bro💯

I don’t trust stickers I have seen wrong stickers before take that cover off and start counting teeth hahaha

Should I buy those wheels off ya and but them on my E36?

I’m 16 and still know that’s not a scam🤕

Litterally coming up ur drive way sideways

Smh scammers

Never had an issue with rocks or scratching using wide tires compared to thinner rim. Example I can have a wide rim but still have a meaty tire stick 2-3 inches past the rim plus it just looks better. My opinion. Those rims and tires don’t look good at all. But then again that’s probably just to people like me.

@midnight347

2 жыл бұрын

Having tires top wide for the wheel is bad for tire wear and bad for ultimate traction or handling by comparison. It's better to have a good fit or slightly stretched tire (I mean slightly not stancer stretched.

@holycow8233

2 жыл бұрын

@@midnight347 ran them for about 17 years now and never had bad wear. Gone through maybe 3 sets in all 100,000 miles to include burn outs 😬

who knew "drag pack" would be the next coined phrase mopar would take over with after the early 00's crazy of calling everything "stage x" from the srt neons lol. Tiered of this shit call it what it is.

Why wouldnt you measure the wheels b4 buying them? A simple tape measure could have told you the truth about the bolt pattern lol

I joined those groups on FB but will never buy anything from anyone in there.

Get a sock and some butter and people wouldn’t do this shit anymore. This shit happens way more these day because are non confrontational. I’d be driving directly to his house with those rims. It’s one thing if they may not know but to straight up lie and say he had them on his car is something else.

Bruh I’d be mad asf if I got jibbed. Hopefully get a new drag set soon!

I have some for sale

@JacobRDoty

4 жыл бұрын

DM me on IG!

these video should be call what not to do if you want to keep your stuff a long time and not strip bolts........nice cars dosnt give skills tho....thats a nice way to lock your sway bar

@midnight347

2 жыл бұрын

Wtf are you talking about? Lock your sway bar? Many many 1000s of people have relocated the sway bar to run 15s...it moves where the bar mounts by 2 inches. Not sure what you mean by lock your sway bar lol

Your using the wrong blade for metal!!! Lol. You supposed to use the one that has short toothed.

I'd put dude on his head lying about what the pattern was just to sell them. I sold rims and the chic didnt do HER research and they didnt clear her calipers and I felt bad and gave her her money back..

Smh. If you would have unbolted the end links first, the sway bar would have bolted back up very easily.

@JacobRDoty

4 жыл бұрын

Did that. Cut it out of the video. Didn’t help

I don't get why dude would lie about the wheels. He could've sold them for what they actually fit for the same $$.

Damn sorry man. I fucking hate liars. Liars and thieves. Which is what that guy is that sold you those wheels. A thief because he stole your money by lying about what wheels he's selling to you. Bummer. Can't wait for your next video with the right wheels!

Lol scammed my ass those wheels need a hub centric ring for them to fit. I hv the same car same wheels.

@kaspertheghost7198

4 жыл бұрын

Don’t think a hub centric ring is gonna magically make the bolt holes line up. You can’t put a 5x120 rim on a 5x115 hub......period.

@bry7zperez375

3 жыл бұрын

Explain more?

@midnight347

2 жыл бұрын

@@kaspertheghost7198 people are dumbasses lol. Get on here poking their chest up trying to laugh at someone else like they know it all when they don't have a clue wtf they're talking about.

:(

I did a BMR sway bar, upper control arm, lower control arms, and relocation brackets by myself. It was fucking ass cheeks