Be careful with that mast. They can’t handle much more than 35psi and need constant lubrication. Contact will-Burt and make sure that if you’re gonna use it, you do it right. Also if the truck didn’t come with stabilizing jacks you’ll need to look into them. At full extension that thing will rock enough to induce nausea in ~15mph wind. Frontline communications who built the truck can also advise on necessary gear/precautions. Source: have used those trucks for 15yr and currently maintain/service 7 of them

@JurassicJenkins

Жыл бұрын

Charles, thanks for your insight, respect and contribution to the community. 🎈

@josso1

Жыл бұрын

good call

@user-lk6mo5fm1l

Жыл бұрын

How about a nitrogen tank and two 1 inch electric air valves for quick deployment? Haha I'm kidding of course. He would be having his own launch into orbit !!!

@brandonthompson9957

Жыл бұрын

Bump because good info

@flymypg

Жыл бұрын

Tim: Do you know who integrated the original van? I used to work at a San Diego company called NSM Surveillance, where the NSM stands for "News, Sports & Microwave", as the company's original business was creating custom media remote vans. While the company is no longer in business, many of the old crew are still around.

This is amazing Tim. A solid investment that's going to even further set your channel apart

@ryndrssn

Жыл бұрын

Hi man I love your work, love having your support from an Errday Astronaut community 👍

@Travoid

Жыл бұрын

I automatically heard this in your voice in my head.

@gregedmand9939

Жыл бұрын

You know what? I would bet if you put together a mission statement and purposeful plan, your good fan Elon might be willing to sponsor your vehicular ambition.... Jusy saying...

@Amerikanskis

Жыл бұрын

Go make another bill gates sponsored video about how I need to lower my carbon footprint ....(but he doesn't). FU RE..... sellout

@feyaia

Жыл бұрын

@@gregedmand9939 Yep. I'd say that's a Go for Launch.

This is freaking badass Tim! Can't wait to see how it works out for you all. Awesome seeing you and MaryLiz in the livestream today. Best of luck over the next 24 hours mate.

@ChickenWire

Жыл бұрын

Hey Hey love your content man

@rolflandale2565

Жыл бұрын

The EA-Team Van?! ..LUNA ...tics

@kugelblitz-zx9un

Жыл бұрын

@@rolflandale2565 lol

For your safety, please secure those Ecoflow batteries! Do so with strong steel straps into the floor. During a crash, or emergency braking these will become very heavy projectiles inside the cabin and very dangerous to you and the equipment! (obviously secure other heavy items too) To stabilize the mast you may want to get some thin yet high-tension(no stretch) rope like HMPE / Dyneema or steel cable and some heavy-duty Auger-Style Stakes to drive into the soil. Plus some ratchets. This would help with the sway of the boom arm. Also as others have said, get a Starlink for RV's dish for connectivity because why not?

@taylor92493

Жыл бұрын

@Dorian Anreiter should have typed it all in sarcastic SpongeBob letters.

@rvnx

Жыл бұрын

If there's a 5G connection present at the launch site you'd have much more available bandwidth with that than Starlink though. (~400MBit/s upload on 5G vs 70-90MBit/s on Starlink)

@thatonemoviebob3902

Жыл бұрын

the boom is made not to sway

Tim!! That's my old van! I worked for WFSB in Hartford CT before I retired! That is so funny. Best of luck with it. I spent a lot of hours in that can going all over the state and parts of Massachusetts.

Pretty fast if it can chase rockets!

@JanTuts

Жыл бұрын

And all that for only 4K $USD, amazing! :P

@lgtwzrd

Жыл бұрын

@@JanTuts It will broadcast from Boca Chica at the amazing resolution of 240p.

@Neal_A_Tew

Жыл бұрын

Chasing and catching are two different things! :)

@myyklmax

Жыл бұрын

Tim and Luna should already be on station at KSC for Artemis launch tomorrow morning. 8:30 AM EDT..

@steef1991

Жыл бұрын

Couldn’t you just hire more people for multiple locations 😋 , na dude joking offcourse ! Keep up the good work men! I mean im sort of jealous that you have the opportunity to do all this , but I’m great full that I can watch your content ☺️ Keep it going , cheers 🍻

I see that some others also have security concerns in mind. As cool as descriptive "artwork" on the outside looks, I'd recommend making the van look as boring as possible, so criminals won't easily know about the fortune stored inside. Good luck with your new mobile studio! 👍

Жыл бұрын

Yeah. My thoughts as well. A huge Everyday Astronaut logo would look great but it's way too risky. This thing is going to recording footage for future documentaries, historic archives, and historians studying the rise and rise of early 21st century spaceflight. A nice and boring paint job is probably the safer option.

@darkartsleather5586

Жыл бұрын

As somebody who's been in bands, has booked for bands, and knows bands who've had all their gear stolen. I support a boring paint job. In urban settings, someone should sleep in it every night.

@jaspersiegmund

Жыл бұрын

Paint it fully black or white and have the option to smack on a logo in some form once you're where you need to be. Could be as easy as one of those swappable poster frames. Non descriptive is the way to go for travel and when it's parked outside. Insuring these types of things is probably insanely expensive. But it would be nice to have a backup plan, you'll definitely won't be the first to come back to a fully stripped van, unfortunately.

@nkronert

Жыл бұрын

@@darkartsleather5586 I hope there is room left in the van for a stretcher...

@joebloggsy

Жыл бұрын

A big ol' magnet logo you can slap on and peel off when stationary might be a good shout.

Tim, you guys should use those outside audio inputs to record stereoscopic sound for each launch. Including stereoscopic sound in a launch video would add an awesome layer of detail to those launch replays.

@glitch1182

Жыл бұрын

This is actually a great idea.

I’m getting a strong Ghost Busters vibe from this vehicle. Awesome work guys.

@xWood4000

Жыл бұрын

Ah, thank you. That's what I was reminded of

@benjaminoake

Жыл бұрын

Agreed haha

@ThompPL1

Жыл бұрын

Glad someone (in the thousand or so comments) thought of this ! . . . I almost did it myself. 🚫👻🚫

@TallinuTV

Жыл бұрын

Heck yeah! :D

Look in to getting a side door tent that mounts above the side door. It should help waterproof your external inputs and reduce direct rain or spray when opening side door in the rain. Looking forward to seeing your coverage. Also an Everyday Astronaut sign above the door inside would hit when your streaming and looking the the screens

@gordonstewart5774

Жыл бұрын

Yes need to block windows from causing screen glare.

As a broadcast engineer, I love seeing people put together small projects like this and seeing what they come up with when looking at broadcast gear from a fresh point of view.

@Grandremone

Жыл бұрын

Yeah so silly these little projects they are doing RIGHT?!

@martinklein9489

Жыл бұрын

@@Grandremone y so sour? He never said silly ... Tims gear is over the top for a self built youtube channel ... but if you compare it to a large broadcast network its still tiny. And ofc it is ... he has to pay for it with just some patreon money and a little revenue from streaming/yt. This was acknowledgment ... not hate!

@nathangek

Жыл бұрын

@@Grandremone Well, compared to a broadcast production this is definitely a small project... For a KZreadr this is obviously massive. It's not an insult, it's just a matter of perspective.

@Grandremone

Жыл бұрын

@@martinklein9489 Still, OP was acting real though there, especially after stating his profession..

@martinklein9489

Жыл бұрын

@@Grandremone he did not, that is you projecting. Him working in the field only enhances the praise.

17:17 Great project, one tip make sure that PC on the floor has it's GPU supported. Since it's on the floor of the vann that PCI-E slot will encounter some hits (bumps). I would advice to put the PC on the side or use another case. But the rest is awesome!

@MostlyHuman

Жыл бұрын

4U rackmount case would do the job with 92mm air cooler

You should do a solar panel array and victron inverter so you have a solid AC power source... Neat that you're re-using a STNG truck with a pneumatic mast. Watch for power lines whenever you plan to extend it since it can kill you if you get within arc range of high power lines. If the seals are old, you may need to rework the pneumatic mast seals since the mast will slowly leak down if you don't have good seals at each segment.

@MrArcticPOWER

Жыл бұрын

You don't think that 14 Kw of AC power is enough for a van? Adding an additional inverter is pointless. Also, solar panels won't do much for applications like this where you need lots of power for a short amont of time.

@tannermeade

Жыл бұрын

Honestly, the inverter in the Delta Pro can already support 1600W of solar. If they pack around three or four 400W panels, they'll be able to run the rig all day and into the night most days. They should totally reach out to Ecoflow and ask if they can get their new PowerKit for their van. That'll give them even more battery (up to 15kw). Cheaper if they go victron, but more complicated and Ecoflow seems pretty willing to get their products in the hands of youtubers.

@dfgdfg_

Жыл бұрын

@@tannermeade 400W is way too low for the server rack, not worth the weight and complexity. Shore power input, larger batteries and an expensive engine alternator is the way to go

@warmon6

Жыл бұрын

@@dfgdfg_ thats why tanner said "three or four 400w panels". Not one panel.

@MrArcticPOWER

Жыл бұрын

@@tannermeade Looking at all the equipment they got, 1600W of solar won't do much. You'll get maybe 1000W continuously for a few hours on sunny days and that's the best case scenario. They're not going camping with this van. They'll go out a few hours at a time and will need big power from all that equipment, just like an EV. And there's a reason why EVs don't have solar panels.

It’s a mobile MOCR! I’d add an SCE to AUX switch in a corner and it will be complete. Jokes aside, this is an impressive functional arrangement, plus it looks so good. Congrats on your technical and visual prowess.

You might want to keep a CO2 sensor inside the back. You'll need good ventillation back there especially with two people back there for hours at a time.

@johndododoe1411

Жыл бұрын

And make sure it's a real CO2 sensor and not one that measures something else and guesses. Naomi Wu did a recent review of several affordable models on her Sexycyborg tech channel.

@kauffmanba

Жыл бұрын

What about CO? Carbon monoxide is far more deadly than CO2 (carbon dioxide).

@dogboy2613

Жыл бұрын

@@kauffmanba What would the CO come from?

@kauffmanba

Жыл бұрын

@@dogboy2613 Exhaust leaks in the engine or generator.

@dogboy2613

Жыл бұрын

@@kauffmanba They'll be running everything off a large battery. The engine won't be running.

So much valuable kit in there, hope it’s going to have a great alarm and gps tracking !

Жыл бұрын

And very good insurance. And maybe a couple of airtags hidden in there for good measure.

@theccieguy

Жыл бұрын

Video cameras

Always trying to find ways to step his game up, never stop! That's why I love this channel, keep up the great work Tim

@Zachhhx

Жыл бұрын

Also how about an Everyday Astronaut paintjob for the exterior next? I can only imagine how sick it will look :)

Great project- First, I totally agree with CL below that with that mast, you need outriggers/jacks, (and you're about to become best friends with a pneumatic cylinder shop, especially seeing water blowing out of the O-rings) Second, a humble suggestion- you should probably check into 3-point captain's chairs for the front 2 seats, those are seats that normally point straight-ahead-toward the windshield BUT can be released to pivot 90° so driver & passenger face each other, and ALSO can pivot 180° backwards to face the interior, and perhaps add 2 more people able to be on laptops / working. Should ALSO mention that it might be worth getting a square-channel tow hitch, then bring along a mountain bike / e-bike to easily run errands or travel distances that you wouldn't want to walk. Third, remember when local TV news crews used KU band satellites for remote reporting? We, I happened to have a KU satellite for business, one of the odd 'perks' was flipping through the local ABC, CBS, NBC remote truck news feeds when I was bored. Based on what I got to see from behind-the-scenes setups from livestreams of 1990s news vans I'd suggest- 1) Add a connector for an awning on the passenger side, you want an awning you can put up so you can access the uplink/downlink panel and do an interview during a downpour. Might also invest in some of those magnetic-clip-together mosquito screens for garage door openings so create a "screened in porch" so that when you turn the lights on, you're not attracting every mosquito & blackfly within 2 miles. And you want a bug-zapper that you can mount ~50-feet away from the truck so you're not broadcasting with swarms of bugs drawn to your production lights. 2) Might be worth adding a Jeep-style full-sized-spare & Gerry-can mount on the back doors- can't be too prepared. Bonus, that frees up the existing spare-tire well for filling up with beer, soda, and bags of ice to keep things cool (favorite trick of football tailgaters everywhere), just slice a small split in the rubber grommet / drain plug so the water drips out. 3) Shade. In Texas & Florida, you definitely want the van roof to have a mirror finish to reflect as much heat as possible. Even better, not QUITE the James Webb level, but a silvery mylar tarp ABOVE the mirror van will reflect heat away from the van a give you hard shade. Who knows, perhaps you can find a surplus paratrooper or Dragon-test parachute and use the lower part of the mast to give you a nice shady 'big top tent" area. 4) Put quick-disconnects on EVERY microphone and headset so that when you forget what you're doing and walk away, the cable disconnects. I almost died-laughing when watching the live stream from a remote van, where local reporter Jerry Penacoli was re-recording his segment intros, forget he was still wearing a microphone & headset as he walked out of the news-van, IIRC clotheslining him because the headset wire wrapped around his neck because he spun his chair around (office chairs that spin 360° are bad, they will try to kill you) followed by a load (and expensive) CRASH as it pulled a head unit out of the rack. (Don't just slide them in on the rails, add that bolt that keeps them from getting pulled out of the rack).

@kindlin

Жыл бұрын

Very detailed. Fun read. You must have done some of this, yourself, at one point or another.

@thespaceguy-tg8lj

Жыл бұрын

Way to long I stoped reading the comment because it was so long

@thespaceguy-tg8lj

Жыл бұрын

Next time do a short comment ok if you agree put in a reply

As an audio tech who hasn't been behind a console in sometime. This brings back some really good memories. Great work as always, looking forward to seeing all you and your team bring to us as viewers. Clearest of skies.

You might want to consult a lightning protection engineer re grounding the van to the Earth when the mast is extended, as a lightning strike could cause a bunch of issues re personnel safety and equipment damage.

Hey TD. Man you've come a long way since you first got started. It's been a pleasure following you. Your channel has matured and grown a great deal. Keep it up buddy

@mkhachfe

Жыл бұрын

Man alive. He really really has. Quite incredible. Good for him/his team.

@joestallings6993

Жыл бұрын

My comment exactly.

GO LUNA!!! Ready to capture history. 🚀

@rocketman1969

Жыл бұрын

Starbase 🤨🤨

As someone who worked with outside broadcast equipment a few decades ago, I can really appreciate what modern gear allows us to do. Back in those days, a broadcast van was the size of a bus, required a LOT of 3 phase power, all to handle 4 cameras which each weighed about 70kg - not including the cables that ran out to them from their control gear. and the output from the whole van was only PAL broadcast quality.

A cool trick is to rotate the upper screen in the gamer station upsidedown to make the bezel between the two screens smaller

Great Job Tim.. Now remember this equipment is mobile and 99% of the time problems are connectors. (or software) So a shakedown ride and possibly some anti-vibration treatment of all those cables is in order. Good Luck!!

Amazing way to reuse an old news van! I recommend getting some strong padlocks for all the double doors like you see on contractor vans. i'm not sure if your cellular transmitters have an external antenna, but one on top of the mast could help when in remote areas... Also, if you do ever need parts or advice on fixing the mast and such, the company that built the van, Frontline, is in Clearwater/Pinellas Park, FL. Nice guys, neat place!

@unitrader403

Жыл бұрын

If they are in Florida Tim should perhaps pay them a Visit on their way back from KSC...

@camielkengen4960

3 ай бұрын

Maybe a Starlink mobile even

Tim. This is insane. The Everyday Astronaut has the least everyday mobile broadcast van. It's unbelievable! Good luck to your whole team and all those making your dream become a reality for all of us too!

Can't wait to see how you wrap the outside of the van, needs a custom Luna wrap, don't think MSNBC are going the be too happy if you run around filming news out of one of their vans.

@TheOneWhoMightBe

Жыл бұрын

NBC sold the van with the logos still on it, so I don't think they can complain much.

Жыл бұрын

They sold it, without removing the branding.. 😉

@Mireaze

Жыл бұрын

@@TheOneWhoMightBe you hear the story of Samcrac and the dominoes pizza car? He brought a scraped pizza car and dominoes threatened to sue him if he didn't strip away all the branding and never mention the company again

@iamaduckquack

Жыл бұрын

I'd say keep it generic, you dont want it to become a target

@skraminc

Жыл бұрын

It might be better. People might give him more access or allow him more freedom from the NBC logo

When the mast is fully extended any movement in the Van would cause enormous swings at the top of the mast. To counter this use RV stabilizer Jacks. The mast on it's own will have alot of swing in the wind. To counter that use 4 small winches mounted on hard points at each corner of the roof of the van. Have them on freewheel during extension then tighten. Also get a compressor mounted to the vans engine with a high idle switch. Mount an underbelly propane tank rated for vehicles and then plumb the two together. The high volume of compressed air will raise the mast quickly.

@Bill_N_ATX

Жыл бұрын

The stabilizers are an absolute must. I’m surprised that the fan didn’t already have them.

@retinaquester

Жыл бұрын

@@Bill_N_ATX Yeah this van is going to have a lot of fans.

Could look into swivel mounts for the front captain chairs. Might be useful.

Love it Todd... As a Comms Tech, the main bit of advice is, make sure you have LOTS of power, as in DC batteries and AC mains supply when stationary...! You have LOTS of power hungry sub rack comms equipment... ! LOVE it LOVE it...! Keep on going mate ...! Love your content...!

Nice setup Tim. Couldn’t see the fridge though…..maybe you’ve tucked that in the front! Looking forward to tomorrow

So glad to see someone finally do this. Great work guys! I can’t wait to see what comes out of the van. Only thing that could be better would be the Spaceballs Winnebago.

@EricDKaufman

Жыл бұрын

MOTHER OF GOD You're Right!

Looks amazing! Keep it up! Just as a word of earning, please be careful with the mast! People often break them by driving with them raised, and do not raise the mast near power lines!!! Lots of injuries and deaths have occurred from masts hitting power lines.

@WildWestDan

Жыл бұрын

Also, you should talk to BitFire Communications about their IP transport services. I don't know any company better at minimizing data transfer while also connecting multiple locations with multiple video, audio, and even comms channels over a single rack server. (Disclosure: I'm friends with multiple employees, but not affiliated with them professionally or monetarily)

Very nice build! From a IT guy, a few suggestions id have would be to build a sliding sleeved support rail for the lines off the side of the van. The weight of those lines and if someone trips or snags one could save you a feed or port/cable failure in the long and short term. The gaming PC's I would move to a server in the rack to push the heat to the back of the van. Close up the gaps in the rack so you make a hot and a cold side and even the NUC could be moved to the server as a VM to reduce heat and energy load. The server doesnt need to be some proliant or dell server, you can move the gaming pc to a Rosewill server chassis to free up legroom and push that heat to the rear. The HDMI encoders could go into the server chassis to benefit from some air flow, and the chassis can be setup to pull from the crew area and push to the rear. Nice work and nice build! now it just needs some paint.

@PsRohrbaugh

Жыл бұрын

If they get rid of the gaming chase, won't have all that sick RGB. But seriously this is good advice

I follow several van lifers on KZread, but that's the most unique vanlife video I've watched in a long time.

Best of luck with broadcast #1 in LUNA! I truly hope that you "patch" the van with some indication of each launch or broadcast location for cool space stuff... Find a company that can promote their wrap through providing you mission patches?

Thanks for all the hard work you and your team have put in to bringing all of us space fans such awesome content!

Absolutely love this! Independent media such as this is amazing! Keep up the great work!

I am a ham (Amateur radio) and that mast is awesome! A 70' mast with several wires running up it would give you a multi-band ham antenna probably from 2m up to 80m (See DX Commander as an example). Nice! :D

Congrats on the van, looking forward to see it in use and maybe covered with a custom wrap! For sure it's a dream come true, I hope it will be properly secured because there is some serious hardware in this!

@milhooz

Жыл бұрын

Or maybe forget about the wrap, maybe better to make it look boring so it does not attract unwanted attention, sad to come to this point but maybe better.

You should mount a star link terminal on the top of that Pole as well To get it up as high as possible to avoid any interference. If you're using star link that is

People know what's in the van now, Tim. Guard it well. Insure it even better.

The before is giving me ghostbusters vibes in only the best way. Lol. So exciting!

Glad to see some behind the scenes stuff with your production. Let's hope LUNA will shoot the quality of streams to the Moon!

Tim, I hope you don't forget to mount a Starlink on the top of your boom. Add a fan on the boom to cool your Starlink dish and the cameras below the Starlink dish. keep the cameras coo

@johndododoe1411

Жыл бұрын

Just put Starlink at roof level. 70 feet or 70 meters makes no difference talking to something 400km up in the air, but any sideways swaying will affect the aim towards each satellite. When it was a news van they probably did the same with their satellite links and used the mast for ground based microwave links to station towers, or possibly as a backup broadcast antenna in case the station was destroyed by a newsworthy event.

As someone who has used Dante for years and holds a level 2 certification in it (before it was online!), you've made a great choice in using Dante, absolute fantastic method of routing digital audio

Programs like Dante are absolutely insane. When I started getting into the A/V industry, Dante was gaining traction and it was absolutely incredible to witness the transition in real time. This is seriously an A/V nerd’s ultimate dream to make a rig like this. Cool stuff

Congrats to you and your team on this spectacular achievement!!!

I’m so proud of you, Tim. This was awesome!

I am so happy for you. Everyone can see your true excitement. But I would recommend, you integrate some possibilities to upgrade your truck. Maybe you want a second truck in the future to outsource some of ur production jobs. For example a truck just for remote controlling your cameras.

Man you've come a long way. Now you need a really cool branded wrap around this vehicle so people can see you cruising the highways. Bravo!!

Great job. Would’ve liked to know more about your communication setup and contingency plan. Doing 4K streaming needs at least 25Mbps uplink bandwidth, which isn’t a big deal normally. But when everyone around you is also trying to do that, could it cause a problem?

@PsRohrbaugh

Жыл бұрын

He said bonded LTE connections so I'm assuming they're using equipment like a peplink router. If not, they need to be!

this is sick. I'll be at the launch tomorrow, hopefully I'll see your van around haha

@unitrader403

Жыл бұрын

@@marsstarlink3235 They probably shot this a few days ago and the Editing/upload was done while they were on the move..

Absolutely fantastic! Everyday Astronaut was already amongst the best out there, but this all hardwired inside will eliminate a ton of hard to find problems when setting up for live broadcast. Long time fan, and I must say Tim and team never disappoint! (although equipment sometimes does...er, did.)

Get ready for crystal clear views without any heat waves! Loving this!

Me watching this at 144p... Interesting. Also, when you said the 70 foot tall mast was going to give a "stable" view I laughed... any and all footage from the mast will have to be stabilized within an inch of its life.

Love that you've got to the point you can do this, well done Tim & team. Looking forward to seeing Luna in the field! Have NBC Conneticut been in touch??

As a Broadcast Tech/Director who has worked many mobiles for sporting events, THIS is top notch and absolutely comparable to the HD trucks that I’ve worked on.

I just love how every video he puts out proves how all-in Tim is on team space. it really does seem like his goal of being "the walter Cronkite of space" is the most important thing to him. as always, I hope his videos are used in universities to teach my kids about rocketry.

Congrats on the van. Is that exterior panel switch board rain proof? Also I recommend dust covers for the ethernet and hdmi ports you're not using

Do you need access to the server rack during the livestream (assuming nothing goes wrong?) If not, how about putting a door in front of it and closing it off to the inside with a direct air connection to the outside so you do not heat up your van as much.

@glennmcgurrin8397

Жыл бұрын

That rack probably cares even more about cool dry air than the people, that's why those inverters have fans in front of them. Those things need to stay cool and dry to function at their best and not shorten their lifetime (and given how expensive some of that kit is, early replacement is not something you want to have to do)

@_aullik

Жыл бұрын

@@glennmcgurrin8397 If you give them direct access to outside air, they will probably run cooler then when connected to inside air. They don't care whether the outside air is 20C or 38C or respectively 65F or 100F, so using the AC to cooldown a rack is just using energy twice and working in a really hot van.

@koomafloo3461

Жыл бұрын

@@_aullik If ambient is 38, that equipment will overheat.

@_aullik

Жыл бұрын

@@koomafloo3461 No not really. your System runs at 60 to 80 C internally, depending on how well it is cooled. If you increase outside temps a bit it doesn't matter that much as long as you have good airflow. So you can compensate for higher temperature with more air.

@nateclarke900

Жыл бұрын

@@_aullik nobody in that van is going to want to listen to those fans lol. If this were the case data centres wouldn’t spend millions cooling their servers. Heat kills electronics, and increasing the replacement cycle of that gear is more costly than running AC

This is a sweet ride. I've been waiting for this video since you told us about it on OLF. Thanks for all you do to keep me and the kids learning and excited about all the space stuff.

That's incredible!! I'm speechless! Four thumbs up, Tim!

"If the van's a-rocketing don't come a-knocketing!" Thank you, please hold your applause.

Tim...the determination you have to bring us good content amazes me. you deserve all the best.

having been subscribed for almost 3 years, It's like watching a friend succeed. Congratulations Tim!

I drive by the NBC Connecticut studio multiple times a week and see these vans on the road all the time. It’s awesome to see one end up in your hands to bring your live streams up multiple levels! Looking forward to it!

All the tech is cool of course, but I was watching expecting you to show off an epic paint job for the outside! 😅

@johndododoe1411

Жыл бұрын

At a minimum I'd expect overpainting the NBC logo. Looking forward to tonight's stream.

The question remains how fast the van can go with the pole fully extended.

@pleasestandby5954

Жыл бұрын

Watch out for bridges!

@brianv1988

Жыл бұрын

That's what the cameras for LOL

@charlesrovira5707

Жыл бұрын

But not under a bridge. 🤣😂😅

It's always awesome to see all you photonic memory collecting space nerds collaborating and working together to bring the rest of us all the best possible footage. Can't wait to see LUNA in action.

this is honestly insane, there is nobody else on youtube who does it quite like Tim and the team - very excited to see the content being made from this!

A donation for the cause! Thanks for all you do, Tim! This is tremendous and should be a great asset for your coverage! So cool! Hope to catch you out in the field some day! One thought would be (if time permitted) for you to travel to a major high-power rocket launch (LDRS, Team America Rocketry Challenge, etc.) and show amateur rocketeers doing their thing...

An everyday astronaut wrap would be the cherry on top of the van!!!

Love how constructive all the comments are. What an awesome community this is!

This is Incredible! Awesome setup man, I'm blown away! I really love the "behind the scenes" tech videos like this, I could watch you explain what everything does and how its connected for hours!

Really looks very well organized. No cables dangling all over the place.

OUTSTANDING!!!! Congrats Tim and Crew!!!

Awning for sun and rain will be a real bonus. . Zip Dee makes custom ones. Keep up the great work. The interviews are terrific.

Great build! Maybe slap a USA or EDA on that mast, Saturn V style. So excited for the 4K streams! Thank you, we will be watching.

Awesome work. That is the step in the right direction. It reminds me to the Ghostbusters car.

That van looks nice and cosy! I love how you placed everything, including the monitors, the STI, and the desk + chairs. Apart from this, I love your content, and I mainly learn rocket things from you in every video, so yeah. Thanks for all this!❤

They make RV swivel seats for the two front seats in the van. Could give you more room up front. Just swivel the chairs around and forward towards the front of the cab.

Tim as someone who works in broadcasting and loves your videos and streams I am sooooooo happy you got some kind of production truck! Best of luck with the truck and the streams you will host!

Wow! There are some great suggestions in the comments, it would be beneficial for TD to take note. My suggestions 👇 Additional suggestions: Power system Keep it ‘green’ where practical. Fold out Solar while stationary + Auxiliary charging power source from the alternator while in transit. Environmental Control System AC functionality and reliability will be a priority to maintain temperature of cabin and equipment during hotter months. This is where a suitably sized power system comes into play. Safety Outriggers to add stability while mast is up. Vehicle immobilizer while mast is up. Obstruction light for top of mast. Mast lightning protection system. Investigate vehicle loading, particularly suspension with load equipment mass.

Appreciate you and your friends being the conduit for us all getting closer to the stars!

Love it but don't go anywhere without a Everyday Astronaut wrap on that exterior!!

Ghostbusters ECTO-1! Brilliant job Tim :)

You need to get that wrapped

Patreon well spent. What vinyl wrap are going to put on it? Ice Cream truck? Ghostbusters? I am not a ninja?

You guys should bolt on some rv levelling jacks at each corner incase it gets windy with the mast up. Also that van is a master piece of equipment congrats 👏

StarCitizen Mako comes to mind... Ubercool! Best of luck on the road with this!

4:59 This is super cool and a great idea

Fantastic, Tim! Your dreaming followed up by hard work and genuine love is beautiful and inspiring!!!

What a great video! I've always just taken live broadcasts for granted. Never even stopped to think how much actually goes into putting on a production like you do. Keep up the great work!!!!

Tim - this is why I watch your channel and buy your merch; you are so into your work and your passion and that of the team comes through. Please alarm that baby and get a nice wrap. News vans are a target for thieves as they are full of expensive gear. Keep up the awesome content.

Always admired the quality of your work tim. your attention to detail is just amazing. your channel was the thing that made me love learning about rockets. Thank you and Good luck !

Incroyable. When we watched the Apollo 11 launch on our fuzzy B/W TV, Uncle Walter and a few others were our "experts." At the time, I thought we shouldn't venture out into space again until it was relatively easy. I'm not sure SLS is that, but I think Starship might be. The other vast improvement is you, NSF, TMRW, and all the other full-time space journalists who together will give us a much more complete and nuanced version of what is happening and what it means.

This is such a great example of mutual benefit. I'm so happy to see you brought the space community to all of us, and the community in return giving you the opportunity to grow. One hand washes the other.

Nice going on the van. Wiring all those connections looked like it was a ton of fun. Also I have to agree on the EcoFlow power stations, we always take ours a car or camping trip. It works great and I might get a Pro or two for home and/or remote job sites.