I bet the entire case acted like an enormous heatsink for the radiator since it's sitting flush and that's why the temps didn't go as high as you thought they would

@DawidDoesTechStuff

Жыл бұрын

That is a good point! I guess the radiator mounting does make sense. 😂

@mesterak

Жыл бұрын

@@DawidDoesTechStuff having the radiator against the case will distribute heat to the rest of the computer so your motherboard can feel warm and cozy in the winter. 😂

@Galiant2010

Жыл бұрын

Not to mention just how open it is to the air around it and not being trapped inside a standard enclosed case that requires chassis fans to push cool air through it. I bet you wouldn't even need the radiator fans on it and just having a ceiling fan on circulating air in the room would be enough... maybe lol.

@jakestocker4854

Жыл бұрын

3700x also doesn't get very hot. I have a thick 120 AIO and it's plenty to keep mine cool on a open air rig. It has a pretty low TDP

@ceddbk

Жыл бұрын

It’s clearly shown in the case diagram that this is built for a custom water cooled gpu

I think the standoffs were for radiator... not motherboard. Standoffs into radiator, screws into standoffs through case. Motherboard directly to case... just a guess. That wobble though!!

@arch1107

Жыл бұрын

the white ones for the radiator, black ones for the motherboard, and that is why the screws didnt fit, probably correct

@popskullz1

Жыл бұрын

am pretty sure he knows he just like sh*tting on products for the vids. wouldn't base my shopping off is reviews

@johnb3513

Жыл бұрын

I think the no standoff approach was dumping heat into the chassis through contact.

@xMaFiaKinGz

Жыл бұрын

The aio pump will die, Dawid should be in jail for that installation

@brando3342

Жыл бұрын

@@xMaFiaKinGz It depends whether the actual pump is in the block or the radiator itself though.

This case is a great example of a cool concept that needed more development. Had they made the base connection more stable and soldered standoffs to the chassis for the radiator like they did for the motherboard it would be way better already!

@jeffreypaul9428

Жыл бұрын

For like the first time ever with one of these cases, when Dawid was done building it I actually said "that's pretty cool looking". I feel dirty and horrible for having said it though.

@chubbysumo2230

Жыл бұрын

there was standoffs for the rad, it shows them clearly in the instructions.

@cv990a4

Жыл бұрын

Concept 9/10, execution 4/10.

@SPEEDFREAK6988

Жыл бұрын

If the brackets for the base were steel instead of aluminum this would likely be more stable and not wobble so much.

@Zebra_Paw

Жыл бұрын

@@cv990a4 LOL yeah but the case structure is somewhat weak.

When i look at that case i feel like i have 10 seconds to comply

@DawidDoesTechStuff

Жыл бұрын

😂

I am impressed at how beautifully ugly that case is. It honestly feels like something you could find in some of the more "Style over Function" sections of Ikea.

I truly like these videos. And even after watching every video you have made, watching them a 2nd, 3rd even 4th time they are still fun to watch.

@fv101

Жыл бұрын

indeed

@bluzeorc9449

Жыл бұрын

Very true

@dazzlerweb

Жыл бұрын

you are correct.

@minsin56

Жыл бұрын

Affirmative

@DawidDoesTechStuff

Жыл бұрын

I’m really glad to hear you enjoyed it. 😃

It's a great day when Dawid uploads lads.

@fv101

Жыл бұрын

indeed

@yoss3l755

Жыл бұрын

amen, awomen and a-people!!

@DawidDoesTechStuff

Жыл бұрын

😃

@bonganihalimani9572

Жыл бұрын

Especially when there a death match arena of death..

@TheDommino

Жыл бұрын

@@bonganihalimani9572 Dude that's the best lol 😂

Computer cases bore me. Really like seeing something different on the market, but on the same note, want something that works as well. Remember someone saying how dumb it was that I took an old microwave window and mounted it into the side of my beige computer case and painted it. Think it's time for the modding community to take it to the next level again.

@stragulus

Жыл бұрын

Agreed! Now that the days of needing external devices for IO (5.25", 3.5") are gone, there is so much more flexibility in how you can build a case. This case had perhaps the right idea, but very poor execution.

@charlesbrown4483

Жыл бұрын

There’s some companies that do a fair number of interesting cases. Of note of the top of my head would be cougar, I have one of their cases and I remember looking at all the options they have on their website when I was chassis-shopping. While mine is just a basic case, they’ve got everything from basic to completely bizarre. And a fair number of SKU’s of said bizarre cases too.

@ThePr0Br0

Жыл бұрын

china domestic market is really exciting, and no I'm not talking about the meme-y stuff like the one in the vid, actual serious polished pc case designs. Especially in itx form factor. It's going to be difficult to navigate but try getting an idea of what I'm saying by typing ITX into bilibili and take a look at the thumbnails.

The metal radiator was contacting the metal case and adding enough mass that heat could transfer into. I suspect that eventually, it would have started to get hotter but with standoffs, not a bad option. A nice case but not one for me.

@IvanOoze1990

Жыл бұрын

idk man

@storm_filter

Жыл бұрын

bro there a gap between the radiator fins and the case

That case somehow looks like a skeletal bird who has to pee quite urgently. And for all its faults, I think it looks rather neat.

The reason the screws didn't work for you at first is the powder coating on the threads. They technically should have plugged those holes during painting. Eventually you wore it down enough that it worked, hahaha.

@raven4k998

Жыл бұрын

you thought only ikea made wobbly flat pack you thought wrong🤣🤣

Either the standoffs we're for the cooler, or the entire center panel acted as a heatsink 😂. Also, if you could somehow weld/glue some rods to connect the top to the base, you could reduce the wobble and it would look pretty cool!

@raven4k998

Жыл бұрын

maybe both🤣

These videos are just great. I love the cheap PC callout videos

This case is only for use in dust free environments. Imagine having a cat or dog. You would be using air canister to blow dust off every couple of days.

4:20 word has it inside those bags of screws were even more bags of screws. dawid is currently recovering from surgery in hospital after being crushed by 30000lbs of tiny bags of screws. thoughts & prayers.

@ryanvandoren1519

Жыл бұрын

These cutaways to a dramatic scene always crack me up. Definitely the highlights of the videos for me! 🤣

I love all of theses videos, and the rewatchability is so amazing! Thanks Dawid!

Dawid... I don't think you were supposed to mount the radiator on those standoffs because I feel that is just adding propaganda back onto the "100% stable and not a health risk at all" chassis top quality content as always

@AnnaDoes

Жыл бұрын

Top quality comment 😂

This is an impressive level of innovation they managed to choke off the airflow even on an open air case! :P This case is sort of interesting, but they really need to add in some ventilation holes behind the rad or include standoffs and come up with a way to space out the feet for better stability or add in some T shaped and angled reinforcement on the feet and back plate for better rigidity or just make the back plate and feet 2-3 times thicker.

I'm almost positive you're supposed to mount the AIO on standoffs so that it can suck in air from the sides

@MenkoDany

Жыл бұрын

Like Dawid did in the end of the video

@1nicube

Жыл бұрын

most of the video was im complanong about the case because he made an error and after make it the right way.

@xSkittlesxNewbx

Жыл бұрын

@@1nicube 2 minutes or so doesn't class as most of the video, like example, most of the video being a complaint about lack of clear directions which caused a non stop struggle. That would be more accurate

@louiesatterwhite3885

Жыл бұрын

@@xSkittlesxNewbx yup, sign of a good case is being intuitive to work in. This is definitely not

@DawidDoesTechStuff

Жыл бұрын

How would that work though? You can’t screw through the radiator into a stand-off? The plastic spacer I used in the end of the video was from Bequiet cooler mounting, not the from the case.

Aside from the wobbly stand and having to install stand-offs for the AIO, the case looks pretty cool

@robertvangstad2740

Жыл бұрын

Looks like a cyber head

@gundalfthelost1624

Жыл бұрын

Looks absolutely awful if you ask me. Like a bunch of random parts in random places with some rgb in the middle. 2/10.

@BeetleBuns

Жыл бұрын

@@gundalfthelost1624 yea, it has no substance to it

@DawidDoesTechStuff

Жыл бұрын

That’s fair! I think I prefer that Tiki head case from AliExpress. 😅

Stupid cases, be they criminal or computer. are always interesting content in videos.. :)

@shannonrhoads7099

Жыл бұрын

Whch one is this though? 😁

@charlesbrown4483

Жыл бұрын

@@shannonrhoads7099 Why not both?😆

There is nothing I don't hate about this case except that I was able to watch Dawid build it.

You probably needed to put standoffs on the AIO but maybe putting the fans in a "one in, one out" configuration would've made it slightly better?

I finally have something interesting to watch while eating, thanks for the video!

I’ve been rewatching all your old videos and they’re just as hilarious a second time!

David I love every video you make and how goofy it becomes. As you love to buy dumb tech stuff can you buy the Cubeor Kanto case as it is one of the most unique cases I've seen. Thanks

Back in the day airflow was a thing, i guess i can throw my clean no rainbow rgb black cooler master case away and just mount everything on a IKEA desklamp to have some sick lights in it🤣👌 great video, keep it up 👌

Recently discovered your channel. All of your videos are great to watch.

I have to say, Dawid, that intro was flawless. Straight to the point, tells us all we need to know. And what a case! Surprisingly good quality components, with surprisingly good performance. Just need to fix that wobble. Lol

Awesomesauce!! When I saw Dawid's short on this case, I was so looking forward to this. Thank you Dawid for making this video!! You sir are amazing 👏 🙌 ❤️

Other than the questionable radiator airflow, and the wobbly base, this isn’t too bad. Definitely LOOKS really nice!

i have the thermaltake wall mountable "case" i love it and see no reason to ever upgrade. especially with cards getting so big. having an open air case gives al lteh room. the dust is meh, but not as bad as i was expecting. also wll mounting the pc is soooo nice. frees up room, and keeps teh heat away from you.

Love the Commentary on your videos! Keep it up!

The RGB in the acrylic actually looked pretty sweet.

Nicely done video. When the turn out went different then you expect and better.

I think this is the most straightforward video I've ever seen Dawid do

That case is hilarious! PC falls off desk and parts break everywhere. 🤣

That wobbly base had me on edge 😂

I love that you read those nonsensical instructions as normally as possible.

"oooh ,some kidney bean glass panels" I just come for the comedy 😂

Hey @Dawid I'd love to see you make a video showing "What prebuilt computers SHOULD be like", where you take OEM's to "school" and show them how it's done. Good price/performance, fair/reasonable profit margin, good IO, good ventilation, no over-the-top RGB, etc. Perhaps even show how a de-bloated OS would look like. And then maybe as a second video, "What manufacturers apparently THINK prebuilt computers should be like", where you build a computer like a brain-dead OEM, showing all of the common OEM-like mistakes. A third video might even be able to show what kind of performance gains you can expect by just avoiding building a computer like an OEM would, even with the same parts. "Computer performance comparison: DIY/Custom vs OEM" If somehow you're able to then partner with an OEM or manufacturer to launch a series of prebuilts that actually use your tips and tricks, that would just be icing on the cake as it were. Cheers. :)

"Open the box" 10/10 instructions, I'm surprised the instructions weren't taped to the outside so you could properly follow the instructions

that thing is the Ultimate Airflow case, except the Radiator mounting method xD

I feel like these types of cases are made by some one in a CAD software either for a school project or part of some internship type thing and never meant to be made, but someone decided otherwise and fired up their laser cutter.

OMG thank you for this because i was debating give this a try last week when i was case hunting..but there were no reviews so I totally skipped this lmao. now i gotta watch the video!

It's a good example of why some cases that people think have no ventilation, actually have far more than they think. Even pushed up against a flat service airflow is happening at a surprising rate, so a thinnish gap going all the way across the edge can be surprising - as long as the rest of the case is designed well enough to take it into account.

It might be that the radiator fans blew the air trough the radiator, but the pressure pushed the air backwards trough the fans and into the main airflow of the case. This generally happens when fans are blocked

I actually like this case! At least the concept. It's original, without being too over the top.

I love cases like this because the concept is there I just need to cut and adjust and then it’s perfect:)

in my opinion that is a really unique case and the only downside I don't like is the unstable legs but with a few modifications of the structure its possible to make some crazy build. 6/10 on the rating for me.

Great video as always. Seeing how flimsy it is on the feet scare me though. Also, thay case reminds me of a Gundam Unicorn collab case I saw on newegg. The thing costs like 800 bucks however

I like that they are trying different designs at least.

ah, a tear almost dropped when you said "ID -10-t" MEMORRRIEEEEEEEESSSSS

seriously that radiator seating flush to the case was creeping towards me like a serial killer 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

I have a Thermaltake P3 case and this reminds me of that, though the P3 seems to be a lot sturdier and easier to build in (though it was a pain to build the first time).

Ohhhhh, all the casey bits!

Great start to a great vid

Right before the rubber gaskets I lost it 😆

Love videos like this!! More stupid cases!!!

I think the radiator is dumping heat directly into the case, considering the thermal mass that might be enough.

The radiator doesn't need stand offs if you're running it in a pull configuration. There's always ambient air around, and the fans will be pulling the heat off the fins, and launching it into the abyss if there is room on the other side of the radiator or not

They could've made the case way more stable by having the PSU go in the base at the bottom

That's actually really cool looking!

When you were "unboxing", I thought the case was broken in pieces...🤣

'Been through a digestive tract but a really short digestive tract' lmfao

And after BeQuiet saw the abuse of their AIO, they asked for all of them back in order to save them from more abuse LoL. I just don't see how long term that's gonna work if there's no air flow from both sides. Thanks for saving us from yet another bad Amazon case.

My guess is the partial digestion feature of the box is a new attempt at "easy open packaging". Probably targeted at the older generation

Dawid, you're right about the radiator, looking at the Amazon reviews, people were saying they had to go to the hardware store to buy standoffs for their AIO rad.

Thanks for making my Antec NX410 purchase look like a mastermind move.

I felt lost scared and alone.. 🤣🤣

This would be a good series Garbage Cases brought to you by Amazon.

was going to mention i wonder if there were supposed to be standoffs for the radiator, so glad you tried that!

A nut or two for the radiator mount holes (and screws to accommodate) might be all the case needs.

wow, that thing is done as soon as your cat jumps on the desk and rubs against it too hard. holy crap that wobble is terrifying!

It looks like the “glass installation” doesn’t leave enough room for a tower cooler so it’s AIO or nothing!

@mesterak

Жыл бұрын

Just put a tower fan next the PC and all will be well 😂

@alensyhn4850

Жыл бұрын

According to the product page, there is 80mm of clearance for CPU cooling, and even though they recommend to use an AIO, it still leaves enough room for most top down air coolers, so that alternative should still be possible.

@iancurrie8844

Жыл бұрын

@@alensyhn4850 The most standard towers are about 157mm+ in height so no towers. (Cooler Master 212: the gold standard). It's only usable for box coolers and AIOs.

@alensyhn4850

Жыл бұрын

@@iancurrie8844 which is why I mentioned "top-down", not "towers" :) For instance, a Cryorig C1 is 74mm tall, a Noctua NH-L12s 72mm, and both would perform pretty well in this situation (cooling a Ryzen 3700x in an open air design). Smaller designs are also available, and they're commonly used in SFF builds, though they might lead to compromise in power / thermals. Anyway, I stand by my point : air cooling in this case should be possible.

@iancurrie8844

Жыл бұрын

@@alensyhn4850 Yes indeed. Let's meet in the middle and say that of the really effective cooling methods: AIO is the only viable option. The truly effective towers are a NO_GO.

This is probably the only channel on KZread that actually use safety box cutters to open boxes

Dave there was clearly motherboard standoffs in that picture to mount the aio to LUL!!!!

This is what you get when you describe an AT-ST Walker from Empire Strikes Back to a blind PC case designer.

12:20 - Might need to keep an eye on Neko around that case. That wobbling is WAY too tempting for him...

looked like standoff extenders for the rad to be mounted on on the picture actually!!!

Loved every second of your Vid. 😃

these open chassis cases are a great idea and look gorgeous. every one I've seen reviewed though has the same issue, they do not look sturdy at all!

This guy is so funny. Made me laugh about the screws.

Never question instructions

I can't decide what would happen faster with this case: my cats knocking it over, or something dying from cat hair since it's all open.

10:05 this design is truly amazing, I would love something like this BUT as a closed case design with black tempered glass, not sure how they are gonna make it work but it has a lot of potential

Lol some assembly required on that case.

Looks like something the dog just threw up 😂

This could make a sick Star Wars themed AT-ST mod build.

Great Video As Usual

That tower looks like it will fall apart if you look at it wrong way

I do like that RGB implementation. The wobble though....

This title is everything 😂

Reminds me of a self-assembly model of a dinosaur skeleton I got from a museum when I was a kid. Looks about equally robust, too.

What about pushing the radiator through the hole rather than the pump head. Also, push config on the radiator. Would that make any difference? It should have enough air as it’s an open case? Just my 2 cents worth

Love the idea of a tower bobble head pc

"futureproofed" case for sure

This case reminds me of a quote "Shitting the bed is not better than not shitting the bed."

The reason it's still cool enough is cuz the Radiator is touching a hunk of metal in a semi-open case so the fans are still cooling the rad and the case is like a huge heatsink keeping it cool cuz of the open air. It still would have been smarter to put standoffs in for the radiator though.

The case wobble is just a new feature! 😂