That note from Tronicsfix needs framing😂

@TheCod3r

Жыл бұрын

Haha definitely

Really nice, Phil. You put in the hours so now you can practically call the fault just based on symptoms. That's near Master tech level, mate.

Don’t even know how I came across your channel. But I can’t stop watching . And we are a van build van life channel .

Never thought I'd find myself subscribing to a channel like this watched one and I was hooked .. Hope you get thousands of more subs buddy keep living the dream 👍👍

I don’t even watch repair videos but you ended up on my algorithm, so far I have binged watched about 10 videos, your very informative and genuinely i nice bloke keep up the good work

Awesome job. I've watched many of your videos that has helped me do some repairs on my kids older consoles. If any of there new one's need fixing I'll be sending them on to you as my eyes ain't as good as before. Keep up the good work.

Hi there, found your channel by TronicsFix, The PS4 Pro 500 Mil edition they sent you. Basically been having your videos on while playing games. Very interesting and love your videos.

Man, that board looked pristine after the cleaning job 👌 beautiful stuff.

love the content bro, i've recently binged all your content keep up the work

You remind me of a friend I used to watch ausie50 may he rest in peace, love your videos glad to see someone like me fixing stuff well beyond repair just for the sake of it!

Fantastic job yet again mate

What a legend you are Phil nice save.. thanks for all your content whatch every night !!

@TheCod3r

Жыл бұрын

Thanks bud, really appreciate that mate

Been a while since u repaired a switch . Seeing this video made me miss it lol. Great fix philburt

Great repair Phil 👍 Did I miss pt2 of the 10 switch repair series ? Or am I having another oap moment 😂

Very well done! The final board looks "better than factory" ;)

Nice save Phil, another console saved from the scrap heap and exploitable to boot, couldn’t be much better

@TheCod3r

Жыл бұрын

Cheers bud, definitely! Glad it was exploitable, nice added bonus

Loving your new shameless plugs Phil. 😁

Nicely done bud!

Lovely work man 😅 that switch had some rough days 💯👍🏾

@TheCod3r

Жыл бұрын

Hahaha definitely mate

Thx for safing these electronics. 👍

@TheCod3r Thanks a lot for the videos on repairing the nintendo switch. I would like to ask a question, i hope you can have time to answer. After watching your videos i came to the conclusion that my Switch has a bad M92T36, but the charging port looks ok. Can it be a just a bad M92T36 and the port still be fine ? What are the causes that IC to get faulty ? Thank you

Legend man. Very good.

love the videos bro

Your very talented at what you do thanks for the good videos

what thermal paste would you recomend i need to clean out mt switch and change paste never did it before so i need thermal paste?

Great video. Well saved. 👍

You're a brave man Phil, brilliant it paid off.

hi phil only just recently found your channel, iv watched alot of your videos and there is some great content, i only live local to you im a security and data/fiber engineer but you have encouraged me to try my hand at tech repairs i have ordered some of the equipment that you recommend. i also have a few network switches and high end cctv cameras that are faulty if you would like to try your hand at repairing them ?

@TheCod3r

Жыл бұрын

Glad to help buddy, good to see some locals 😉 I may be interested in doing the PCBs mate yeah, not tried doing camera equipment yet lol

@Pitbike_Ginge

Жыл бұрын

@@TheCod3r ill sort some things out for you mate when i get chance and you can attempt to repair them if you like or just use them for parts who knows you may be able to get some content out of it.

@michaelstockert5023

Жыл бұрын

@@TheCod3r where are you located???

Thanks for the information on the playstation 5 I have since changed mine to Horizontal rather than vertical I haven't had it for that long under a year haven't used it a lot so hope I got to it in time once again thanks🥝🇳🇿

Love what you do...i used to dream i.ll do that as a job but right now only a dream.Amazing job 😍

is there anyway i could get in contact with you recently i thing my playstation 4 has been halcked my game call of duty warzone wont load it keeps going to the loading screen of if youve never played the game before

Excellent video and fix

@TheCod3r

Жыл бұрын

Cheers buddy

Hi Phil, what kind of solution and at what ratio do you use with the deionized water inside the ultrasonic cleaner? I Bought an ultrasonic cleaner recently but the results haven't been stellar. I've used it with ipa and deoinized water 50-50 for two minutes but it doesn't seem to clean well and it leaves a white residue on the board. Thanks, love your videos!

@TheCod3r

Жыл бұрын

Cheers bud! I use Allendale flux remover, I actually sell it on my website cheaper than what Allendale themselves sell it (by the litre). It's designed as a 10 to 1 ratio (10l deionized water to 1l cleaning fluid) and works really well. I usually pre heat my cleaner to 50⁰C and then run the board in it for about 10-15 minutes and then scrub it with a brush while it's still in the cleaner

You could put the board into a small tub of fluid inside the ultrasonic cleaner save bending the shield

It be pretty Kool to see you and Steve build a board together like from a ps4 or something man it would be a pretty Kool to see

Brilliant video as always 👏 also @TheCod3r I'm sending you a switch lite in for repair , have put the order in packaging up tomorrow

Nice job well done bud.

you're a hero mate

How much would you want the unpatched switch unit as is? eBay prices for unpatched are high

Should have some merch made with just ….“40% air flow” 👌🏽

@alayahbartlett8054

Жыл бұрын

Just a t-shirt with "I paid way too much for this"

3:28 what theee lmao

well done mate

Your the man Phil certainly did a good job in fixing that switch and the last tech was not a

Hey matey, did you say in the video you have a website? What is it please?

M92 is a blessing and a curse. it's mostly to blame/along with usb c for no powers. but at the same time it limites damaged to the rest of the board, unless you are really unlucky with cpu/bent pins.

Would you look at buying a cheap dehydrator? Put the board in after cleaning and let it slowly dry out the board

Good job!

another great vid.

What chemicals do you use in the ultrasonic cleaner? And what is the size on your cleaner?

@UserUser-ww2nj

Жыл бұрын

TheCod3r · @TheCod3r @TheCod3r 9 minutes ago Cheers bud! I use Allendale flux remover, I actually sell it on my website cheaper than what Allendale themselves sell it (by the litre). It's designed as a 10 to 1 ratio (10l deionized water to 1l cleaning fluid) and works really well. I usually pre heat my cleaner to 50⁰C and then run the board in it for about 10-15 minutes and then scrub it with a brush while it's still in the cleaner

Nice to see the video started the same as the rest haha I paid waaayy too much for this switch HAHA

Nice resurrection. Another device saved from the landfill.

Love the mug 😜. Good video. Not thought about heating the board up from the underside before will use that in work ✌🏻. Still got a PS4 Slim to repair. Do you know what size BGA balls it uses on the main APU? I suspect the solder joints are damaged from being dropped as at first I got no video in spite of everything checking out ok (Port/HDMI IC etc). Now it won't turn on at all after changing the port. I removed the port again and made no difference.

@novakanedj1

Жыл бұрын

To note the machine did refuse to power up at all without pressure from the heatsink bracket before which backs up the damaged joints theory.

@TheCod3r

Жыл бұрын

Cheers bud, it works wonders. The balls will be 0.5mm or 0.55mm depending what stencil you have 😀

@novakanedj1

Жыл бұрын

@@TheCod3r I have a couple of sizes of solder balls will have to check what they are. I will probably have to re-ball it manually as I don't think the stencils I've got for BGA chips will marry up.

@novakanedj1

Жыл бұрын

They're Chipquik 0.5 and 0.55 so they'll do 😊

@TheCod3r

Жыл бұрын

Ouch that won't be fun lol, I've done that a few times. If you have a similar stencil go ahead and line them up and then finish it manually, makes it much quicker if they're close to lined up 😉

Cool fix... im goto have a go at doing a switch i got but the chips are sooo small. And I have a cheaper hòt air station so its melted a kindle and burnt the desk lol 😆 Also you mentioned the perent lock on a. Couple of switch videos... there's a way to remove it without nintendo. Depending on model.. its called. salt mkey generator Hope it helps 😅

Really fantastic

Hi mate watched a lot of your videos great content and quality . I’ve been trying to contact you via the phone on the website but it keeps going to voicemail . I have a switch ?I want repairing but have a few questions to as before . Is there anything there way to contact you ? Regards Rob

Hello from Australia 🇦🇺

@TheCod3r

Жыл бұрын

G'day mate, welcome 🙏

How much is a ps4 slim hdmi replacement I want to find out prices.

@TheCod3r

Жыл бұрын

I charge £50 plus the cost to ship the console back mate

Watched it for giggles anyways good vid as always phill

@TheCod3r

Жыл бұрын

Haha cheers buddy

Why you put the Display at all that stuff all the Time? You pur it on the Cooler? Scratchy scratchy is youre Friend right? 😅 Nice Repair! 👍🏼

@thecod3r where are you located???

@TheCod3r

Жыл бұрын

Willenhall, Wolverhampton mate

I need a non patched switch MB. Had to sell my hacked switch but I have an old donor with a bad board I'd like to fix myself.

@TheCod3r

Жыл бұрын

I have this one available mate. I'll be listing it on my website soon, not sure on price yet though as I need to research what they go for. My price will generally be 15% lower than ebay prices as I won't have to pay ebay fees on it

nice fix

What sort of a muppet leaves aluminum tape on the board, I get it is useful for diverting hot air away from components but you'd think they'd take it off after they are done

@GADBabaganoosh

Жыл бұрын

should have used kapton tape instead!

@Ghost572

Жыл бұрын

@@GADBabaganoosh I think the aluminum tape is good because its rigid and doesn't blow over when air is blown on it, the only thing I'm wondering is what is the danger from the glue being heated up. So from a safetly point of view its probaly better to use Kapton tape.

My mate vice is the only one who takes on switches I thought.

Don’t suppose you would fancy recapping an Amiga a1200??

Awsome!!

Hi dude what happned to the I bought 10 broken switches video you did a part 1 and then never bother with the other part 😢😢

Sweet!

Maybe you need to go to Japan, and look for a broken Nintendo Switch at a very cheap price..

I wish I had the skill , knowledge and patience to do this....

I am a sexy bitch, thanks for telling me that with the cup, I know it was a hidden message to me...🤣. Great video Phil. Thanks

Looked like someones first attempt at using a solder iron and heat gun, just a guess they did the chip first realised they melted bits and went too lightly and hesitently with the solder rod temp just enough to make the solder melt, all in all could have been far worse out of ten for the previous repair attempt I'd be generous and say 6/10 for effort and workwise 5/10 even though the fault weren't fixed they tried and sent it to a propper tech before they did further damage.

👍 awesome

Nice!

What's your background in electronics? Self taught?

Is it yourself that fixes every console that's sent to you via the website I mean or do you have other techs working alongside you bud

@alayahbartlett8054

Жыл бұрын

It's just phil in his loft :)

what does mean when he said "unpatched switch", is it so rare ?

@TheCod3r

Жыл бұрын

It's not rare but it means it has a bug which allows it to run custom firmware

@alucard8955

Жыл бұрын

@@TheCod3r how could you reconize it , is it version ?

g`day phil

@TheCod3r

Жыл бұрын

Hey buddy how's things?

Fair play a British youtubber giving costs in pounds first., Itsgreat to see 👍

You said thermal paste 😳😅

Or more

Can I buy a board from your shop then ?

@TheCod3r

Жыл бұрын

Yeah you can, I do sell them but I haven't listed this one yet. I can list it now if you wish

@billymoney5345

Жыл бұрын

How much do you sell them for mate . Defo interested

Evening

Phil the human pick and place machine

@TheCod3r

Жыл бұрын

Hahaha yep, on that note I'm doing a pretty cool challenge soon 😎

@RampageLP1

Жыл бұрын

@@TheCod3r can't wait keep up the good work 👍

unpatched???? wowowowow

I bye it from you like what you do two

Oh noooo hhhhhhh ..👀 😂 ✌️ The phill did it

I'd buy it for 100$

Your crazy music is to LOUD

Oh NO! I was the 666th person to like this video. lol I'm cursed now. lol

THE COD3R TESTING THE LIMIT OF HIS SKILLS IN THIS VIDEO??

LOVE WATCHING YOU VIDEOS PHIL YOUR SUCH A GREAT LAD AND SO CLEVER HOPE YOU GO FAR ON KZread MY MATE CAN I HAVE A SHOUT OUT ON YOUR NEXT VIDEO PLEASE MARK AN DAN MY GIRL WE LOVE WATCHING YOU PHIL ❤️👍👍👍👍

@TheCod3r

Жыл бұрын

Cheers buddy, yeah I'll try my best to remember to drop a shout buddy

@markwilliams9964

Жыл бұрын

@@TheCod3r THANKS SO MUCH WE GOT ALERTS TO YOUR VIDEOS SO IT WOULD BE AMAZING MARK AN DANIELLE FROM LIVERPOOL THANKS SO MUCH KEEP YOUR GOOD VIDEOS THERE AMAZING 👍👍👍

Don’t even know how I came across your channel. But I can’t stop watching . And we are a van build van life channel .