The technical qualities of this video - lighting, camera angles, editing, narration - are just outstanding. The people complaining about why he hasn’t finished this or done that should pipe down and appreciate how much time goes into putting together a broadcast-quality 45 minute video like this.

@algorhythm1454

4 ай бұрын

Absolutely right. Lazy buggers. 🙄

@WaldosWorld

4 ай бұрын

I appreciate it! It is very time consuming to make videos like this 👍

@micheljansen85

4 ай бұрын

I really like his videos. Would be nice if he could stop buying a new car every minute and finish the gooseneck.

@swamp-yankee

4 ай бұрын

@@micheljansen85why though? It’s not like you’re gonna borrow it. You ever stand around running a MiG welder outside in the winter? If you like the videos just let it go & enjoy. It’s not your project, and we’re getting free content, and he’s not even shilling supplements or an online therapy/data mining corporation. We’re the audience we don’t get to determine his content. We just tune in or we don’t.

@donquixote3927

4 ай бұрын

Yep. Very easy to follow even for a non-mechanic like me.

I really loved your video. I’m 67 and have Parkinson’s but when I was your age I had a shop in my garage and in my spare time I would repair customers cars that were brought to me. Though my primary job at the Ford dealership was in upper mgmt, I loved turning wrenches. The only car I worked on were the 89-95 Taurus SHO. I could diagnose common issues, do major tuneups, pull and replace or rebuild the engine and even opened and refreshed the manual 5 spd cars. The things you did on the jaguar brought back fond memories. Your passion is incredible and your general knowledge on working on cars second to none. Thank you for allowing me to relive your no non-sense approach to fixing things and handling problems. I chuckled when you tightened the piston on the e-brake with pliers and referred to the “special tool” set that some people use but you found needle nose pliers our just as effective. I had that “special tool” set.

I'm 78 now and therefore don't get into all this engineering giggery pokery now but I have to say this is the best maintenance/repair video I have ever seen. Excellent camerawork and lighting without obstruction so as you have a clear view of what is being worked on. Good clear explanations. Top marks for this production and yes, being a Brit I love the Jaguars

I really like when someone buys a used car like this and truly fully checks and changes everything that's needed and maybe couple things not needed now but still does,this is a lot more interesting to watch then other massive KZread auto channels that do this

Waldo's style of work is more realistic because he is very pragmatic with his jobs here. He does not care about aesthetics but just does what needs to be done which is a more accurate depiction of what happens in a shop. It also shows how much you can do with basic tools (as long as you have a lift of course).

@HighDefinitionVideo

4 ай бұрын

I long for a lift. Not a ton of flat land where I am :)

@seanhoude

4 ай бұрын

Gotta have a lift to do any serious work on a Jag. The front suspension is designed to swing out of the way and hang off the front end.

@user-oe1mb9hu9i

4 ай бұрын

I wish I had the space and a lift to be able to do this but living in town with no property, it's impossible.

2007 Super V8 owner here (the long wheelbase version of the XJR) for going on 10 years. 1. Excellent video, you never see people working on these. 2. Do you not have a press? The 20 ton harbor freight one is a game changer 3. Road noise is partially tires I am sure 4. Please redo the headliner as I need to do mine 5. They are reasonably priced and easy to work on 6. I found the arnot coil springs ride better than the air suspension, but if you want to go back, the conversion process is easy to reverse (it’s almost always the bags leaking that causes the replacement and/or the filter on the compressor) 7. Spray the subframes, but it won’t rot as you say 8. Get a lower engine cover as that keeps corrosion away 9. Get the top engine cover because they look good and keep noise down 10. Change the supercharger oil when you have some time. 11. What rotors did you buy? I want to do rotors soon on mine. I have been using akebono pads. 12. Orange coolant is factory. Overall my ownership experience has been fantastic. The 4.2 and 6 speed ZF and the design are just extremely well done and they are fast (4.9 0-60). I did a thermostat, the coil conversion, and the parking brake ECU in almost ten years. You can put tons of miles on these jags and they run forever (knock on wood).

@83j049733rfe4

4 ай бұрын

You and him, these cars need owners like that. Rightly and properly maintained, they can show up just about anything in period, and maybe not a hellcat, but I would at least reckon a 392 Hemi. From 2012 to 2020, my 1997 Jaguar Vanden Plas was without flaw in it's performance. Straight Six, but never failed me... The only unreliable thing about it is, as typical of my generation, my income and employment.

@lukespector5550

4 ай бұрын

Wanna help me push-start my 1988 XJ40 3.6l Daimler Sovereign? Lucas Electrics with vacuum fluorescent dashboard! 🧐

@KCNYC

4 ай бұрын

@ptstouring49 how reliable is the air suspension? I used to own a Range Rover, that was problematic.

@howardsimpson489

4 ай бұрын

I have owned lots of Jags over the years from Mk5 to V12 Xj. Nice to drive but awful to work on and not reliable (Lukas again), most people steer clear hence the low prices. Run a problem free Nissan Leaf now, charged off solar.

@stephenbarnard8353

4 ай бұрын

Tyres: Vredestein winter tyres definitely making a big contribution to road noise... :-(

Just happened to find this site when the Jaguar peaked my interest. This man has a refined quality to his presentation. No whining, no drama and even proper English. Not only is he a great mechanic seems to be educated as well. This site will be at the top of my list. Along with adapt ape. Another great heavy duty diesel mechanic.

@Lagueralcadio

3 ай бұрын

Would you mind sharing that site? Greatly appreciate it! Thanks.

@nsbioy

Ай бұрын

Piqued. Speaking of proper English…

Brilliant video. Your seemingly endless patience with those little annoying, restricted access fasteners is truly impressive. A final breakdown of costs and time would be icing on the cake.

I really enjoy the in - depth maintenance videos you put out. whether it be a import, classic, euro, or a truck! Keep putting these out Waldo!

@stilllmkp

4 ай бұрын

i enjoy you

@WaldosWorld

4 ай бұрын

Thank you!

You're a master mechanic and a master teacher. I appreciate you sharing your knowledge with everyone. Well done, sir!

@seanmoore4653

4 ай бұрын

Shutup

@Notfiveo0

4 ай бұрын

How many miles are on that cat, did he say?

@MrJkosta

2 ай бұрын

"Master" I don´t think so. If he´s a "Master" than what is an actual Master called?

Very well done! No cutesy stuff - straight-forward tour of the basic. most likely to need repair mechanicals. 2006 VandenPlas owner here. 124K mile well-maintained southern car I bought for $1,250 4 yrs ago because no one, not even the Jag dealership, wanted to work on it. Dealership couldn't even reliably duplicate the key acc'd to the parts counterman. No, they're not an S-Class, but if you are a hobbyist with reasonable mechanical skills these cars are nothing to be afraid of, a steal if you find a nicely kept one and their looks never age. To handle the electronics, the Jag "Topix" software can be found online and you'll need an old Windows XP laptop, but you'll be able to duplicate the key for a second set and handle all of the networks. Fun to watch it scan the car and turn systems on and off! The shop manuals are available and informative. There's a guy in England who'll even convert the radio to full Bluetooth access. Two tips: If you disconnect an electronic component, the computer will sense a continuity fault and set a code. You can use the old "disconnect the negative battery cable and touch it to the positive" to clear the codes (no scan tool needed). Try MOPAR Rust Penetrant on the rusty bolts - the stuff actually works used as directed.

Just found this channel.I think I'll come back to it.Clear,concise, and no b.s.

Wow! I have the same car 2004 XJR with 69,000 miles. I just done upper control arms and tie rods etc. Your video just gave me more confidence to compete all the maintenance! Thank you!

@user-wv1pj6wh4h

4 ай бұрын

Hes a mechanic...things look easy and simple bu thye are not.

@steveballmersbaldspot2.095

2 ай бұрын

69k? Nice.

Quality content Waldo. Do not compromise your content, keep up the high standard. We do not want rubbish vids every week...that is for lesser channels! Its a Jag, and its in good shape. They tend to have electrical problems, and corrosion from road salt does not help. They are a nightmare, and not very many on UK roads nowadays. My buddy had one and it wouldn't start, it was the immobiliser cutting power to the fuel pump. Possibly the Aluminium panels and the steel chassis combo.

@WaldosWorld

4 ай бұрын

Thank you, I appreciate the feedback/encouragement! I have to admit: I hadn't considered electrical issues as a potential issue. I'm not looking forward to having them, but at least I'm qualified to fix them 🤷‍♂️

@richardprice5978

4 ай бұрын

@@WaldosWorld yes i agree active-air or active-Tbar's are amazing and yes in year 2000+ coil or leafs just feel cheap but 🤷‍♂ i know people that did a similar result on late90's caddy's, i just wouldn't have in fact iv done the opposite and used aftermarket air-systems so much better feel/control/towing-capacity ect even without fully installed-correctly aka my sibling was being cheep on his tj/lj so for now it's missing kit-parts that it need's but it's his plan to add them ( was my plan on top of the v8+auto-over-drive engine swap but didn't get to it in time 😉 ) in the next 5 years, but yah you can tell it needs the rest of the actu-air/off-road-only kit but still better than stock/use-in-05to07 as i tried farriering a empty light 2 car huller and couldn't pull it off even in the flat driveway/tow-yard boss-place, now in 2022 loaded to 5-6k lb's so yes it works 👌 as for the jaguars AJ4.0 it's probably the automatic and or the lacking of modify options ( rare+electronics+tunes ect ) that kill's it $$$ and jag missed the opportunity to use the mustang-mod/coyote-v8/and or ford TR6060 or pattern-bell that's not helpful, yes i realises that in 2000-09 selling a stick would have been a hard/rare sell ( but normal for my chargers era ) but would have helped keep resale's values&pr/enthusiasm higher , have one out of a Lincoln LS-8 2002-05? non-vvt like your engine is just without the supercharged option and no im not 100% sure about fitments to a 10R80 transmission's but that's been the hope sense 2014~ in the jeep, yeh im slow at Christmas 🎄gift 🎁to family/old-man ( there both ford fans died-blue, im a 60's mopar guy myself 😉) to were now it got transferred/sold down/someone-else, so now it might endup getting a 4th-G coyote instead but 🤷‍♂ as a mechanic 👨‍🔧in 2009-14~ this fell into my lap and coyotes were more rare and $$ at the time

@davidelliott5843

4 ай бұрын

I fitted Monroe air assist shocks to a Ford which allowed softer leaf springs. The ride was 1000% better but body roll was horrible. I fitted two solenoid valves. One isolated the shocks across the car (body roll fixed) the other isolated the compressor. They don’t like starting under load.

I watch other videos but I should say your videos are my favorites when it comes to mechanical jobs. You are very thorough in explaining what is needed to know and your videos are masterfully shot. Keep up the good job.

I’m not a mechanic, I just like older cars and watch a lot of YT. It’s great to watch someone who clearly has the knowledge and talks us through the work clearly. No delays, really good editing. Great presentation all round 🕺

"Looks like the transmission fluid isn't too bad but since i'm already in here, I might as well replace the transmission" "The altenator seems to be working fine, but since i'm replacing it, I might aswel replace the AC pump and timing chain as well" "The tirepresure seems to be a bit low, but since i have to inflate them, I might aswell replace to ECU" This man leaves no stone unturned, jokes aside I admire your passion for cars and your comitmment to do thorough service and repairs!

@johnspurrier0001

4 ай бұрын

It's a real problem. I have a JKU with it's axles on the ground because I wanted to replace a bump stop. When all is said and done I'll have installed an e-locker, upgraded the brakes and will have all new suspension with new control arms, sway links and track bar. Now that I am thinking about it, may as well upgrade the brake lines too.

@flouisbailey

4 ай бұрын

Can you come over I need some............ and show me how it should be done on one of my cars?

@TGriffiths-ve6nw

4 ай бұрын

I am no mechanic but I do my own work with the aid of Google whenever possible. I take the same attitude regarding "as long as I am in here". Better safe than sorry.

I am absolutely horrified at how easy that Jag is to work on?! I mean everything has pretty good access to it, and you had plenty of very tough nuts to break. Now it makes me want one,

@shanemcman3665

4 ай бұрын

A Jag will affect your personality

@ciklop4206

4 ай бұрын

​@@shanemcman3665same for Volvos 😅

@jupitercyclops6521

3 ай бұрын

​​@@shanemcman3665 Will it have a person referring to negatives as "bloody messes"? If so, will it be over night, or more of a gradual transformation? I love the phrase. Folks don't seem to know it's origin. Some think they do. I've heard well respected British historians get it wrong. I've heard some theorize with incorrect certainty that it referred to combat & what not. Smh (scholors) Allow me to set the record straight. As are a lot of good profanities that have been time tested, it's a body part or bodily function. It's the monthly shedding of the lining of the female what not! The menstration! What makes more of a bloody mess? What creates more of a bloody hell? Remember , you saw it here first folks!

@johng1902

3 ай бұрын

Yes, way easier than the 68 XJ that I had if for only one aspect: the 04 used coarse thread bolts vice fine thread bolts on my 68.

The XJR is one hell of a sled indeed, beautiful lines, understated style and plenty of power. The facelift version is my favourite.

Great job, both with your work on the car, your video, audio, and post production. Probably the best I've seen for mechanic work on a non-television level.

You ended up with a top notch ride. I like how well you addressed every issue and even communicated some of the unique procedures. Well done sir.

I mostly don't understand what you're doing with your car maintenance and repairs, but find your videos fascinating. And honestly, I am jealous of your knowledge and abilities. Keep 'em rollin....

Love the way you describe tie rods when you move the wheel side to side and a ball joint up and down, I learn a lot just by listening to you, I am now subscribed and I'm glad I found your channel, beautiful 2004 jag bud.

Great job and great video! I'm impressed how easy the XJ is to work on, with all the info on the video I'm sure I could tackle everything over several weekends,working a few hours each Saturday - a full on lift looks like it would come in handy! My overall take away was that for an average person (aka someone who doesn't normally buy their Jag or Rover new from the showroom) is that you need to either have a lot if time, be a mechanic with a lift, be someone who has a mechanic friend with a lift, or have a long-term good working relationship with a garage owner who will cut you a break on price when charging you for all the labor and parts needed.

I had the same generation jag. Mine was an '04 too. I liked mine. It went away in favor of a 2003 s55 amg mercedes. The two biggest headaches I had with mine were what is know in Jag circles as the "hose of death" and a transmission problem.... The hose of death is for the throttle body heater. The wonderful Jag engineers ran the rubber hose in the intake valley. Not a big deal on the non- supercharged version. A very big deal on the supercharged one, requiring removal of the entire supercharger to replace. As for the lovely 6hp26, mine was perfect 85% of the time. You would have almost never known there was a problem... until you got on the throttle hard on something like an on ramp. Then it would blow the 5th to 6th gear shift and put the trans in limp mode. As soon as you shut the car off, it would reset, and be fine. Until the next time lol. After awhile I learned how to sort of drive around the problem. Enjoy!

I can’t believe you rebuilt that whole car in 45 minutes!!! 😂 Beautiful car, good job.

@Dwayne-mb2uj

4 ай бұрын

Well at the factory they put a whole car together in 45 min so I don`t know why you are so impressed with this schlub .

@MrSirGiuseppe

4 ай бұрын

​@@Dwayne-mb2ujso what you're saying is a dude in a small garage does the work in the same amount of time as the assemblers who have all the fanciest equipment?

@Dwayne-mb2uj

4 ай бұрын

@@MrSirGiuseppe Well you know those guys are in a union so they better bathroom breaks .

I thoroughly enjoyed your attention to detail during the repairs of your newly purchased Jaguar! Well done, Sir!

A pleasure to watch the video! Always the right tools, always good spare parts, no kiddie jokes, impeccable craftsmanship and great filming too.

Your troubleshooting approach is top notch. Really good video. Newer cars are so ridiculously expensive that skills such as yours are valuable. It’s generous that you share them!

I've never considered replacing just the bearing in a pulley. Great idea. Nice car!

@armoris66

4 ай бұрын

If you ever have a problem inserting the bearing back into the case, just heat the case. The expansion will allow the bearing to slip in easier.

@michelleobamasthicccocc822

4 ай бұрын

​@@armoris66yeah that's the technique I use on your mom's butthole

@davidelliott5843

4 ай бұрын

I’ve always looked at replacing just the bearings, but look carefully and parts costs are low enough to not be worth the hassle.

@Align700nitro

4 ай бұрын

most of the time the bearing cost the same as the part and in extreme case the bearing itself cost more.

@Sugurain

4 ай бұрын

I'd recommend replacing just the bearing only when the part is discontinued (like in this Jag), impossible to find, or ridiculously more expensive than the bearing alone.

What a beautiful car! It was a pleasure to watch your video fixing it, thank you for sharing it!

I enjoyed your commentary and description . We the viewer were included with you all along. Andrew summed things up. Well done. Cheers.

What I like about your channel Waldo is that you do the job properly, with no expense spared 👏🏻👏🏻👏🏻

First time viewer and found myself watching the entire video as your production, editing, and narration are top-notch. I absolutely love that generation Jaguar’s design but have always avoided owning because of the reputation of unreliability. I might reconsider after this viewing. Will be interested in your post-winter report card. Merry Christmas! 🎄 ~ John in Ohio

That is the channel that I was looking for for many years. I appreciate your car knowledge and how to put together a very interesting, not boring like many other, video of that sort. Thanks, man!👍🍻

Thanks for a great video! Also it makes me appreciate having a local fastener shop that supplies pretty much everything under the sun at low cost, different materials and will sell me a single of whatever with a smile.

The s class might be more reliable, more powerful, and might be luxurious but the jag is a jaaaaaaaaaaaag and you can steal anything because you have a jaaaaaaaaaaaag. And its really beautiful and elegant and you look like a man of great taste and culture (I hope everyone understands the grand tour reference.) It really seems like a easy car to work on (edit: thanks for the likes guys! I am not a mechanic and just a car guy who knows a bit but not a lot about cars so when something I say is wrong please correct me and something i forgot to say is that I wanted a merc since I was 9 so I am very biased in favour of mercs.)

@WaldosWorld

4 ай бұрын

Hahaha you've summed it up perfectly! 😂

@williamegler8771

4 ай бұрын

Why would want a less reliable less powerful and less luxurious vehicle?

@clevelandmaker386

4 ай бұрын

​@@WaldosWorlddude...be glad.... you got that for a steal.... Be glad that your dream car isn't 75k... CAUSE UNCLE KEN TOUCHED BETTY LOU WILLIAMSONS BOOB IN THE SUMMER OF 59 AT THE DRIVE IN SO..... NOSTALGIA......WHEEE!!!!!

@EwacoolThereviewer

4 ай бұрын

@@williamegler8771 A few points to note: Firstly, any 20 year old luxury car is going to be somewhat unreliable due to their high tech nature, although speaking from 7 years of XJ ownership experience I can say it has actually been pretty good. Since it is all aluminium it doesn't rust. Secondly, the comparable S-Class, the W220, is widely considered the worst S-Class ever made and the interiors were cheap and full of plastic. A little known fact is that Jaguar actually made all the wood veneers for the interiors because MB couldn't figure out how. Thirdly, the most powerful engine in the S-class may be more powerful than the Jag, but because the Jag is all aluminium it weights significantly less meaning that any performance difference is negligible. On top of this, the car handles and performs better due to being around 250kgs lighter than a comparable limo from any other brand apart from maybe the A8 which was also aluminium. As Clarkson put it, "The S-Class may be a comparable limo, but an S-Class won't go or stop anywhere near as well! If you're a keen driver, this is the only big car you can have."

@tik-tok

4 ай бұрын

more powerful and more luxurious? wtf

Bought the same model couple weeks ago :) lots of work ahead. Also was impressed by it's aluminum body. Thank you for the quality of video. No BS soundtracks and other garbage. Nice job 👍

Wonderful watching you work So careful patient and precise

I just watched your video of you answering questions from 2yrs ago,then you had 10k subs,now you have over 315k,that's amazing and showing that your a hard worker, congrats on the insane growth in 2yrs

Hey Waldo, there's absolutely NOTHING wrong with getting excited and getting wood, it happens to all of us 🤭🤭🤭🤭😊

@TowMater603

4 ай бұрын

Yeah buddy ! hahaha

@theogharoon

4 ай бұрын

Particularly, when sitting in a Jaaaaaaaaaaag.

@baddriving3966

4 ай бұрын

Not after my PSA hit 12 and I had the prostatectomy it doesn't :( Remember to get your PSA checked!

@t5jerry

4 ай бұрын

@@baddriving3966 what's a PSA ?

@baddriving3966

4 ай бұрын

A test for Prostate Cancer@@t5jerry

Thanks for sharing! Great fun watching you fix up these great machines from the comfort of my chair.

Really terrific video and presentation. I just acquired a 2004 XJR very similar to yours but in white. The overview you presented in this video sure gave me a better understanding of the car and its quirks. Always something to tinker with I am finding out but it is a smooth ride and fun to drive. Great job!

Loved watching this pro DIY mechanic restore this gem of a vehicle. Especially appreciated his attention to detail and quality . . . . I imagine the satisfaction he obtains by bringing this beauty back to life and the enjoyable drives in his future.

Man, I really have to take my hat off to you. You really know your stuff. I can really appreciate someone like yourself that really knows what he’s doing. He would put most Ford mechanics out of business. Love your videos you’re awesome man you’re my new best friend.

Super video Waldo - I love doing a real in depth service on a new car. I was genuinely surprised how easy this one seemed to be to work on.

@WaldosWorld

4 ай бұрын

Yeah, it was fairly easy to work on 👍

I thought I'd skip through a bit of this but ended up watching the whole thing right through, even went back 20 odd seconds a few times to re watch some parts. It was really interesting and enjoyable. Thank you

This was really great to watch. I used to have a 2006 S-Type VDP and while not an XJR by a long shot, watching this brought back a lot of good memories of my Jag. Thanks Waldo!!

I think the bigger question is Why do you have four sets of golf clubs?

@danielwitham1791

4 ай бұрын

For hitting cars that don't reach his standards of course.

In all my years doing motorway breakdowns a host of others especially in the middle of the night I’ve I thought I’d seen it all but that was before I watched your video, you young man are a rare breed of people that do a fantastic job. 🙏👍

Very well done - no BS just skill and knowledge presented fluently. You have a new subscriber - respect.

Thoroughly enjoy your KZread content and production. Your are a truly blessed presenter. A complete pleasure watching your projects and presentations, very well done sir!

Started my morning with a new Waldo video! Yay!! If I lived on the east coast, I would absolutely buy a used car from you. Love your attention to detail, and thoroughness. Merry Christmas!

Well shot, edited and presented production! Real joy to watch. Excellent results!!!!

A real joy to watch the patience and detail you put into your work.

Hi Waldo. Please post some more videos. It’s good and informative to see you working

Great job, what an excellent video. I was sucked in as soon as you started working. I love your pragmatic approach and willingness to just get on with what needs done. I would buy a car from you in a heartbeat.

Awesome video Waldo. You have amazing mechanical skills. You make working on a car look easy. Keep posting and I will keep watching.

Your work and narration is great. Boy, wish I lived next door. Thanks for showing us how it's done!

Grand job! Beautiful car and your technical knowledge and practical ability is impressive. Keep up the good work!

Thanks for the great detail you go into to repair your cars, always a good watch.👍

Great a Waldo video. Wow, you can fix so many things I would never attempt. Nice car, you're correct, the S class is a superior product and properly has a better grain of wood too, lol... Merry Christmas to you two and the fur babies .

@WaldosWorld

4 ай бұрын

Thanks, Merry Christmas to you too!

Just came across this video. Great job. I just got my parents 2004 XJ8 going after it sat for the last 8 months. I had put in new coils last summer and it ran great. Charged up the big battery this past weekend and it fired right up. The V8 is super smooth and has plenty of power for when you need it. Their car has the air suspension and it does ride nice. I'm gonna keep my eye open for an XJR now that I saw what you were able to do with yours. I think the build quality is pretty good, but what I like about the car is that it feels super solid. Thanks for posting the video.

Great video with a lot of helpful how-to examples. I have owned a 2009 XJ8 for 3 years and it's been an excellent car, but like any older car things age especially rubber deteriorates. Keeping up with it is key and they are really easy cars to work on.

This and the X358 models that succeeded it are IMO the best they ever made. Light, classic looks, the AJV8, sumptuous interior. With the Jag-droid infotainment upgrade available now, I'd still love a super V8 as a daily driver. Great video!

Great 46 minutes Waldo. Amazing work! A brilliant car for good money. I'm glad you like interesting and classic cars.

I love your enthusiasm for the best car in the world. Purely my totally unbiased opinion of course. I have always been a Jag fan and I am surprised that they are still so easy to work on, as I have owned several older models. They were always meant to be an enthusiasts car and you were meant to spend a while tinkering and enjoy that just as much as driving it. Hence the awesome toolkit which came with older models but were always kept by the seller. I have owned a few Jags and never seen a second hand one with a toolkit. The newer one you have seemed like you needed a lot of your own tools but was still quite easy to work on. I really enjoyed watching your video. You seem like the right sort of bloke to own a Jag and I am sure you will soon get over your daft idea that a Merc is even in the same league never mind better regardless of cost. And I bet you couldn't do the same sort of jobs on a Merc as you can so easily on your clearly much nicer Jag. All the best mate. From Ja the Welsh Jag enthusiast.

One of the best instructional videos i have ever seen. Great job.❤

Excellent car knowledge and care. I didn't know the Jag was so easy to do maintenance on. I have no idea how you seem to end up with such good conditioned cars and trucks.

I had a 2001 Vandenplas and my interior honestly looked more plush. Maybe because XJRs are a more sporty model? But that car really turned heads. 24 mpg on the freeway between Phoenix and San Diego in high summer with the a/c. I was a king in that car

@AndyK.1

4 ай бұрын

VDP do have a higher quality interior

Great video!! As a jag nut i found this very informative. Thanks. Happy New year to you 🎉

Such a satisfying video! It is certainly so nice to have all the toys (tools) to make your job sooo much easier.

You did the kind of stuff on this car I used to do on any cars I ever bought. You have the advantage of a lift, but a floor jack and jack stands work. As long as the drive train is good, it's not hard to maintain a car and make it reliable. Merry Christmas.

A good trick to get those Torx bolts out is coarse valve lapping compound. That also works wonders with Philips head screws.

This is an awesome channel. it have everything we should do after buying a car. as someone who love cars, this channel is a great watch

It was lovely to see. This guy knows how to get things done. He has a good feeling for machinery and displays incredible common sense.

I really like the thoroughness with which you do your repairs

Great video really appreciate the long format and the work you need to put into it, subbed! I've had a few cars with brembo or alloy 4 pot calipers, if there's resistance when removing or installing the pad in the caliper, check if there are stainless steel guides for the pad, if so the alloy can corrode underneath push the guides out onto the pad causing breaking issues and uneven wear. To be honest, even with no guides the caliper body tends to get galvanic corrosion as the paint disappears from mating surfaces of the pad and cause the same issues, just had that on my 2018 Alfa Romeo with brembos fitted, bits of a pain.

Great video that jogs along nicely. Thank you for taking the time to make this excellent video! Every man should own a Jag at least once in his life! 🇬🇧

@gewfone

22 күн бұрын

AND EVERY WOMAN TOO ... I've owned many Jaguars, and only have two Jaguars at the moment... be inclusive in future perhaps ???

@TheGreatestBeyonder

22 күн бұрын

@@gewfone Yes of course, and women. And Trans and non-binary too! 👍

@gewfone

22 күн бұрын

@@TheGreatestBeyonder no need to be sarcastic and negative....

@TheGreatestBeyonder

22 күн бұрын

@@gewfone apologies, did I miss a group or a minority?

@gewfone

22 күн бұрын

@@TheGreatestBeyonder enough of that drivel, grow up....!!!!

Damn that is a great video. Funny (laughed at the special crimp tool) and the quality, explanations and advice is top notch. So good.

Thank you for this video. Always loved the supercharged Jag and your presentation, speaking style and humour really works. The format of this video really works for me.

@wilson2455

4 ай бұрын

firstly, looking at the interior, the previous owner did a top job in looking after the car. Even the exterior paintwork isn't half-bad, so getting a 'supercharged' 4.2L V8 Jag XJ in good working order for $3800 is a steal * a wash/polish/wax wouldn't hurt !!. Remembering that the car is 20 years old & things do get old/wear out, spending some more $$$ on quality aftermarket coils/shock absorbers, extra sound deadening, new seat foam/cushioning, etc. would turn this good car into an excellent Grand Touring vehicle, where you can sit on the speed limit (70mph??) all day in comfort & not be fatigued. * if maintained well with oil/filter changes, etc, that gorgeous 4.2L V8 Supercharged engine & transmission will still be purring well after 500,000 miles..

Great video as always! You are good at explaining and your videos are a joy to watch, both entertaining and educational! I wish you included some exhaust/supercharger sound samples though 😁 Keep up the good work, excited to see whats next!

You do a great job going through all the details... I love your spirit of wanting to do it right with quality parts... This was my first time watching you.... and I have subscribed. If only you lived in the Atlanta area... I have a 2002 S500 and I love the ride and how quiet it is as well. Blessings

Probably the best video on Jag.Excellent work very enjoyable...

Outstanding Job. Love the Jag. Merry Christmas to You Sir.

Watching you repair this Jaguar was euphoric. I love these old Jaguars. You are correct about those v8 engines. Very good and they make great power!

@speedracerjeff

4 ай бұрын

😂 not when compared to the Germans of the same generation… 500hp vs Jaguar’s measly 390hp…

@WarriorsPhoto

4 ай бұрын

@@speedracerjeff You like playing comparison games? 😂 🤣 🤪

@speedracerjeff

4 ай бұрын

@@WarriorsPhoto lol I actually love the XJR and S Type R styling and interiors but wish they kept up with the Germans when it came to HP.

@WarriorsPhoto

4 ай бұрын

@@speedracerjeff 400 HP is perfect street power. It’ll get you to 65-70 MPH. 😉 😜

@speedracerjeff

4 ай бұрын

@@WarriorsPhoto I suppose you’re right, and there’s always someone faster out there anyways lol

I’ve subscribed because it’s one of the best car channels I’ve come across. Excellent quality.

I recently found out about this channel, I really like how you can educate all of us in all aspects 😅 Please keep doing it

First time watching. I was super impressed with your skill and overall optimism. I very much respect your attention to detail. Super fun to watch on this Christmas Eve day. I think I will stick to my simple Corolla.

Great "down to earth" vid, no attitude, very personable, and the absolute best part is the golf club test. Your delivery leads to no skipping and watching the entire video from start to finish - and being from Ontario do appreciate the salt commentary

Incredibly well done video...wish they were all like this. Kudos!

Just found your channel and now binge watching your fab content - big thumbs up from the UK.

Finally a long video from Waldo! Should do more like this and more frequent please. 😇

Merry Christmas Waldo another great video . I just love those older Jags well done! Wish you would post more often!!!!

@WaldosWorld

4 ай бұрын

Thank you! Merry Christmas!

Excellent video. Your engineering knowledge really pays off.

I just,for personal reasons,subscribed! And also,because as a mechanic,I appreciate how you deal with this car. Jaguar is my favorite brand for limousines.

Bro, I'm glad I ran into your channel. I love watching how you just do everything. You definitely inspire me to try to fix more on my own. I don't own a jaguar, but I watched the whole thing. It's always good to know how to do things.

@zadekeys2194

3 ай бұрын

Same here. I'm more interested in learning to repair (properly) in order to flip, with a AA cert pass. I'm in my late 30's and never really been interested in cards in general, but the technical repair side of a vehicle has really caught my attention, both mechanically and electronically.

Sweet looking car Waldo!! Really enjoy how you cover all of your upgrades and maintenance. When I lived in northeast I never seized everything. Trans bolts, spark plugs, brake hardware. Really makes a difference if you’re keeping a vehicle. I could see you were cold. When you build a shop look into a waste oil heater. They’re great. Hope Aspen approves of your latest toy. lol. Merry Christmas to you and your family!!

@WaldosWorld

4 ай бұрын

Thanks Pete, Merry Christmas!

Great video!!! Most informative maintenance video Ive ever seen on KZread. God bless

Great channel which I stumbled upon! You manage to work with not even a quarter of the cussing I apply to all projects 🤓