Mate, grow up get a proper job. Get a low mileage Fiesta like everyone else. You won't earn money from KZread

@JustbeingHayden

2 ай бұрын

I’ve got a proper job and I dare to dream anything’s possible if you try enough 🫡☝️💪

@FPV-TV419

2 ай бұрын

@andyasdf2078 Yet your here watching the videos you say he should give up making 😆

@jaywood8152

2 ай бұрын

What a bellend your are mate you probes don't have a proper Job or ever had one

@Hardshot18

2 ай бұрын

Don’t make money of KZread look at the people that have millions from KZread ?😴

@ifrazali2712

2 ай бұрын

This guy's clearly jealous 😂🤣 or something 🤔. If you don't like KZreadrs y u watching them. Y u even on the tube altogether??? Seriously 😳

Love your videos pal keep goin and I like that your doing your own way and can't wait to see what car is next

@JustbeingHayden

2 ай бұрын

Thanks very much 🙌🙌🙌

Wow...come on board brov....awesome vlog and hey, 👒 off, you try so hard....looks like proper hard times ⏲️ are waiting for you.....(it's the 🛞 wheel alignment sensor)brov, easy swap out.. and a bit of cheeky adjustment....need to chill and ✔️, the rest....respect

@JustbeingHayden

Ай бұрын

Thanks matey

Good video getting there buddy, what a legend of a subscriber to help you with the locking wheel key

@JustbeingHayden

2 ай бұрын

What a geezer 🙌🙌🙌

Great video keep up the good work I use autel scanner more but sometimes when working on cars you do need more than one scanner ive 2 autel and a topdon

@JustbeingHayden

2 ай бұрын

One can dream one day mate 🫡🫡🫡

I've a Carly and it tells you specific sides or wheel for abs etc. as for the channel I think it's a luck thing. Just keep pushing out the content. I came for the astra vxr and stayed for the rest. Keep it up

@JustbeingHayden

2 ай бұрын

Thank you mate 🙌🙌🙌

Like your videos pal just take your time dont bite off to much take in to consideration the end user who buys the car and the margains you have into them i sold cars for years and always set a margain cost your time as well. Keep up the good work 👍

@JustbeingHayden

2 ай бұрын

Cheers man 🙌🙌🙌

Great video mate. Can tell the effort is going in 👍🏻.

@JustbeingHayden

2 ай бұрын

Thanks buddy 🙏

The fact you always show your mistakes or oversights os one of the reasons I like your channel. I enjoy watching.You fixing cars. People should give you a break as you are just a dude who likes having a go keep it up mate. 👍

@JustbeingHayden

2 ай бұрын

Thanks so much 🫡🫡🫡

Nice video mate, doing a great job.

@JustbeingHayden

2 ай бұрын

yes big man :)

Keep doing what you do and enjoy it 13,000 people like it ✌️

@JustbeingHayden

2 ай бұрын

That's the plan!

Your doing a great job with the videos.

@JustbeingHayden

2 ай бұрын

I appreciate that! thanks Daniel :)

Keep at it mate ,the channel wont be the same without a few quality bodges

@JustbeingHayden

2 ай бұрын

I do my best 😂

You have to do you tube because you enjoy doing it. You'll make urself ill if you try and do it to be the next MA. Its a crazily saturated platform... but the fact that your still growing is great! Watched u for a long time! My advice (not that you asked for it 🤣) ... get someone to help u... give away a piece of the pie... get someone to help film. Take that part off your hands so you can concentrate on being you.

@JustbeingHayden

2 ай бұрын

Cheers man

Just got mine back today failed water pump 😂 we should meet up one day I'm on Birmingham my self think I seen you at work a few times when I worked there but keep doing this content it's brilliant 💙

@JustbeingHayden

2 ай бұрын

Sounds good! no probs buddy what colour is your s1

@jakecurtis5710

2 ай бұрын

@@JustbeingHayden mine is silver matey

Good video and sound. Long enough too.

@JustbeingHayden

2 ай бұрын

I’ll keeep it up if ya keep watching

Nice update don't beat yourself up over missing bits it's all a learning curve I've never repaired a crash damaged car but I've repaired my own car and plenty of mot failure cars from Facebook marketplace as regards to bolts not tighten I usually tighten all the bolts as I go then toque them up on my own car I re check them same bolts again for piece of mind for myself just to check all is good 👍

@JustbeingHayden

2 ай бұрын

Wicked shout cheers man

@martinburbridge7545

2 ай бұрын

No problem 😉

VCDS & a laptop is what you need buddy 👍🏻

Just keep chipping away mate. Consistency is key. When shit goes wrong try not to be to down about it or atleast try not to show it on camera. You'll get there one day 👊

@JustbeingHayden

2 ай бұрын

One day son 🙏🙏🙏

U got get the alignment done once the steering is out of precision. Always

@JustbeingHayden

2 ай бұрын

🙌🙌🙌🙌

Abs sensor or abs ring on the wheel bearing it will bring all lights up it's all connected

get wheel alignment done bud an clear fault codes should be good worse scenario steering angle sensor might needs recalibration

@JustbeingHayden

2 ай бұрын

🙌🙌🫡🫡🫡

drive the car and steering angle sensor should just clear itself.

Steering angle fault will be down to your tracking being so far out, get it aligned and clear codes they shouldn’t come back👍🏼

@JustbeingHayden

2 ай бұрын

thank you matey yes we shall :)

Learning more

@JustbeingHayden

2 ай бұрын

sure are mate :)

Have a look at Autel MaxiDas DS808S-TS

@JustbeingHayden

2 ай бұрын

I shall man cheers

Xtool d7s is OK mate and covers all cars

Headlight brackets are for a pre facelift A1.

@JustbeingHayden

2 ай бұрын

I know now haha waiting on new ones

vw needs vdcs

@JustbeingHayden

2 ай бұрын

🫡🫡🫡🫡

If your tracking is out it will throw up faults

@JustbeingHayden

2 ай бұрын

thanks for the info matey

@fromthetoon1602

2 ай бұрын

@@JustbeingHayden your doing well apart from the missing bolt on the sensor 😂😂 keep the vid coming 🤙

@JustbeingHayden

2 ай бұрын

@@fromthetoon1602 😂😂😂

Stop comparing yourself to Mat Armstrong. He's been doing YT for a long time and hasn't just popped out of nowhere, to say otherwise is disingenuous. You can only be you, so just be the best you can be. As someone has said, this is a very saturated part of YT, you're up against a lot of well established people, as well as new to the game but have mechanical experience / garage facilities. You've only been doing this buy and fix for a short time so you're at the very beginning. Have you considered contacting some established channels and getting advice? Might be worthwhile. The worst they can say is no. Good luck.

@JustbeingHayden

2 ай бұрын

🫡🫡🫡

Problem with this channel is you’re always cutting corners not buying the right parts not replacing parts you should replace just bending them back as straight you say when’s it my time to hit the big time it’s not going to when you keep cutting corners but people like Matt Armstrong did because they put the money in and the job right the first time if you don’t put the money into your cars you’re not gonna get rewards used to enjoy watching your videos but now you struggle to explain what you’re even doing

@JustbeingHayden

2 ай бұрын

Where have I cut corners man

@JustbeingHayden

2 ай бұрын

Didn’t mat but the wrong subframe for the rolls people make mistakes

@john40glos_26

2 ай бұрын

No, Matt couldn’t get a subframe for the Rolls so he bought a BMW one which wasn’t big enough certain parts on this car and the Subaru like bending the upper support on the Subaru where it need a new one or it will never be right if you want to make it big you just need to come across more confident with what you’re doing it will go a long way trying not to be negative I used to love watching your videos

@JustbeingHayden

2 ай бұрын

@john40glos_26 I’ve bought a new front end for the scooby just waiting to weld it in mate 🙌

You need an onlyfans mate

@JustbeingHayden

2 ай бұрын

Sure do son