Every time anyone (including myself) has bought a 3d printer, you always spend the first 2 months just printing cool stuff. Enjoy Taylor Martin.

@thecomplexion7524

3 жыл бұрын

Where’s the best place to get designs?

@DaveSmith-cp5kj

2 жыл бұрын

@@thecomplexion7524 Thingiverse. Then later when you learn how to use a CAD program, grab cad has more sophisticated designs you can use to save yourself time in designing other stuff.

@thecomplexion7524

2 жыл бұрын

@@DaveSmith-cp5kj thanks so much!!

@DaveSmith-cp5kj

2 жыл бұрын

@@thecomplexion7524 Oh and as a tip, sign up for an account on both sites and every time you download something, hit the like or heart button. This way you know if you downloaded it before. Note that thing's searches suck so things won't appear as hearted in the search page, but will on the download page.

@thecomplexion7524

2 жыл бұрын

@@DaveSmith-cp5kj good tip!

The utility knife is one of my most printed parts. I always give them away when people really show an interest in them.

Here's what I think will bump this up a notch. Hydro dipping the pieces and adding a clear coat. If the material can take paint being applied anyways.

@Klomster88

2 жыл бұрын

As someone who 3d prints a bit, i can say that with a FDM printer like Taylor has, there will be visible layers. Paint shouldn't be a problem, i paint my stuff with acrylics fine. So long as the paint doesn't melt plastic it should be good. One can tell the printer to make thinner layers, but that will make the print take longer. MUCH longer. I usually go with 0.12mm or 0.16 layer height, one can really speed up printing with 0.4. My printer can go around 0.08. But going that far, at least doubles print time on a small project, but on a 28mm model, it goes from 1hour to 4 hours 20 min. So what i'm trying to say is that you need to sand the models to really make them smooth, and unless things are really smooth hydro dipping with clear coat will have visible layers. However with 0.08 the layers are near invisible. And my printer is a CR10 mini, sort of a budget printer.

@JustAGlitchFL

2 жыл бұрын

Sand well or use filler primer for layer lines

Also, just a tip from a fellow 3d printer; if you want your part to be "heavier duty" i.e. tougher, add more perimeters, not more infill. There are plenty of KZread channels that have proven that, for the same amount of filament, more perimeters will yield stronger results vs. higher infill.

@BestDamnEDC

3 жыл бұрын

Thanks for the tip! I can definitely use all the tips I can get!

14,000 lumens just incase you want a pocket bat signal.

@jhonnylacksville6765

3 жыл бұрын

You could print the bat lens :p

@abdullahrex2171

3 жыл бұрын

pro trick : watch movies on Flixzone. I've been using it for watching lots of of movies these days.

@beaujude7514

3 жыл бұрын

@Abdullah Rex Yup, I've been watching on Flixzone for years myself =)

@skylersalvatore2335

3 жыл бұрын

@Abdullah Rex Yea, have been using flixzone for since december myself =)

@milankylan7037

3 жыл бұрын

@Abdullah Rex Definitely, have been using Flixzone for since november myself =)

Have fun printing! I got my first 3d printer a few months ago and I haven't stopped looking for things to print as well as designing my own as well. Just one word of advice, I find infill does not do much to increase strength, but adding more perimeters to the print helps a bunch. Your mileage may vary. Happy printing!

I would LOVE to see a showcase of the things the community comes up in a video

Dude that’s so sick. now you just got to make them topo and you can sell them lol

Yeeesss!!! would love to see a series on "best 3d prints/files" Iv'e been watching for 5 years now and this kind of stuff just feels like the natural progression of the the mini mod mondays from back in the day!!! Love it! Also I went to school for mechanical 3D design so if you ever need help please feel free to reach out.

Awsome. A place for an o-ring on your sd card holder would be smart

I've been wanting a vid like this for so long, there is so much cool stuff you can make

3D printing is incredible! I’m a design engineer by trade and have been working with 3D printing on the hobbyist side for about 3 years now. I’d love to answer any questions or help in any way if need be! One cool thing about printing that you mentioned is the magnets. You can stop a print and insert magnets or nuts to have them be captive in the print. I’ve also done threaded inserts that are pressed in with soldering iron. For certain applications you can also anneal the plastic in an oven to get better strength-ish for other applications. I’m really excited to see what you can do with this.

One of the coolest videos in my opinion. Love to see you just going like a vlog and so excited about something again

Most people usually go through three different phases when 3d printing. First is kinda "Yoda figures and fidget spinners" where you print mostly cool things that while they don't have a particular use, you enjoy printing them. Second is where you start printing (and designing) more usable things. And finally, the last stage, where you're solving problems with 3d printing, designing your own parts to fix your own specific needs. But you've totally skipped to phase 3 and that is SUPER EPIC. You should definitely look into different materials; there are as many 3d printing materials than there are knives in your collection ;)

Thanks for the overview of this exciting hobby aspect!

I've been watching all your videos for a good year now, and JUST realized I wasn't subscribed. YT always puts your videos on top of my recommend and so I just assumed I was. Whoops, problem solved, subscribed and hit the bell, thanks for the great work man, keep it up!

Love this style of video, for sure should do it more often, just a nice casual feel to it

Got into 3D. printing about a year ago and yes it can be addictive, I was suprised , I bought a printer as a tool for other hobbies but 3D printing is a hobby in itself lol.

Been by there a few times. Love those old International vans parked outside!!

Edc videos are so creative and original. Good work

Congrats on your new printer! I've been working on a 3D printed EDC with engineering materials, I'd like to send you some stuff for you to try!

Don't know if ever done one of these but I'd love to see a first aid kit EDC video maybe comparing some of the common pre-made ones vs making ones ourselves. Just a thought. Love everything you do getting into edc first time because of seeing how easy you make it look.

Next step a CNC turning centre and vertical machining centre!

@BestDamnEDC

3 жыл бұрын

Now we're talking!

@rhysabul1401

3 жыл бұрын

@@BestDamnEDC I would love to see some EDC stuff you make from aluminium or brass, the same CAD skills can be applied but some mechanical know how might be needed if the machine faults. I love your videos and I love 3d printing so I was psyched when I saw this notification!

Functional stuff is just so much more interesting to me than the tat that people print as 'toys'! Nice vid man, ta

This video is a good video for intro to 3d printing.

Having printed for years, it still excites me lol

@thesusboomerroblox6516

3 жыл бұрын

What printer you recommend

@jhonnylacksville6765

3 жыл бұрын

@@thesusboomerroblox6516 honestly, my ender3 has been phenomenal. Hard to suggest spending more, a prusa is more refined, but I've had no issues where I feel incapable. It really depends on what material you plan to print though, Ender 3 handles pla petg just fine which are you two "nontoxic"(general understanding, no guarantee, always do your research) options, both of which have different properties, that will cover most material needs. Getting into abs (the s stands for styrene, which is the toxic part) is doable with an upgrade enclosure, but I've found no need to resort to abs. Abs is the industry standard for plastics, but there's better stuff like polypropylene, nylons, polycarbonate, and so on. Very desirable traits, but require too much heat for almost any printer I've seen for a good price..... but even the Ender 3 can do it with the right upgrades. Probably still cheaper than buying a prusa, but the prusa is a quality machine. I also prefer the Ender's frame. Teaching tech KZread channel goes into info on Ender deep, good source. Proper printing got his head on right, smart dude. He goes through the trouble of printing nylon on Ender. But seriously, under 200$ for the Ender is probably your best starting point. Tomb of 3d printed horrors will show you the best set up, for tuning the Ender mechanically as well as on the software side. This is many years of dedication summarised into a reply, sorry I wasn't more succinct, but there's alot to know, and slot goes into this to be safe. Do your research. I personally want an skgo kit but that's high end expensive and for advanced users. My first printer was built from parts, was a good experience, but I would have been happier having the easy success of starting Ender. God bless you

@DaveSmith-cp5kj

2 жыл бұрын

@@jhonnylacksville6765 Second on tomb of horrors. He has the absolute best ender 3 setup vid. I now have multiple enders and I used his vids to set up all of them.

Iv had my 3d printer for about 4 years and I have 3 now I'm just getting in to edc stuff being a tow truck driver there are tools that I use everyday and it has came in handy to reprint a tool that wore out

I've always wanted a Leatherman eye glass bit holder, standard 2D bit size.

I love this 🤩, I just bought a 3d printer and I have a been a long time fan of your show. You do an amazing job and I would love to see more 3d printer tutorial video from you as well because I have know idea how to use one. Lol keep up the great work!

I literally started printing a similar wallet 30min ago!!!

Great video please do more 3D printing.

Hey, hold shift when you are rotating the part in your slicer and it should snap in 15deg increments.

Great video cant wait to see the printed norsman

Welcome to the club haha. It's absolutely mesmerizing no matter how many times you print

I have that copper warrior and I love it thru the two recalls I still have it

Big fan of this video style from you 🤘🏼

The Flash Forge/Monoprice Voxel's software is pretty limited, but a great starting point. It's where I started as well. Really looking into the Prusa offerings. Those seem to be great quality, and good software options.

That is pretty awesome.

this is pretty cool, I've been wanting to buy a 3d printer for a while now. But that flashlight, dammm

Have u tried to make a knife sheath yet? Very interested if you have or you have plans to do so.

Great video, glad to see you having fun. Why'd you choose that specific printer?

@BestDamnEDC

3 жыл бұрын

I’d been on the fence about three or so different printers. This one went on sale for

That’s going to get addicting 🤘🏼

that's awesome. great job.

Take a look at bike tire levers for that pry bar.

I had the same reaction when I got my 3d printer. Great video as always.

Avid printing nerd here. Infill does not mean more strength. Adding more infill just means longer print times. 15%- 20% is what you want to keep your prints at. What adds strength is your shell. By the look of your thumbnail photo as well it looks like your shell is really thin because I can see the infill. Up your wall/ bottom and top layer counts. Happy printing!

You gotta try one of the pens

That's Awesome keep up the good job

Try that little pry bar with 100% infill and look up salt annealing. You can make some pretty amazingly tough stuff out of PETG or PLA.

This is dope. My friend bought one and sells keychains and stuff. He’s made is money back in like a month. Makes me want one too. Great video.

try making scales for some knives

Honestly the first second i saw the video cover scrolling on you tube i just hype out.like crazy since red it's my favorite color and i'm like finally a decent color theme edc but even that wasn't the exactly real situation it still really awesome brother

How long till you get into Metal Printing now, Taylor? look forward to that.

I am more into watches than I am EDC, but I really want to try printing watch cases for watches that I c n only buy online to get a feel for the size

I’d love to see you do “suspension clips” with your beads tied to em.

I love 3D printing its sooo fun

Here's what will really blow your mind. You can buy MG Chemicals supershield conductive paint to coat your prints. Then use a Caswell plating kit to plate your prints in copper, nickel, chrome.

I have a cheap 3d printer and used it for a fair amount of things. The most useful was fixing a knife design I tried to make and had failed. I'd much rather waste plastic than metal. Took a few tries, but I got the handle and blade ratios where I wanted them and even used that to get a grinding jig close to final angle. They are super useful for weird things

Are you going to be 3d printing knife scales?

If you want to print while you are not around (bigger prints) use a smart home plug and smart home camera in order to prevent waste of fillament. Good Luck!

I have an idea for an add on item for the Orbitkey. Make a pill holder out of strong plastic with a hole on center at top to add on the key fob. Have the opening of pill storage to be a slide track that snaps in place. The demensions should be 6 cm long, 17 mm wide, and 6 mm thick. Alot of people have to take daily meds and this would be a handy solution to a compact edc. If this thing becomes a success you can throw me a small royalty if you want to. Thanks Taylor!

Are these available for purchase?

How about doing a video on Ben Banters new knife coming out in October "Lander" open source knife scales.👍

Once get your printer dialed in print this stuff in PETG. Also use Fusion 360 for design work.

Cool. Idea: design a 3d printed EDC dump tray, make it interlocking or something... 💡

Wow, super cool man

Great, now you’re my competition! Hahaha

C'mon Taylor, you'll be doing your kids 1st EDC setting 😁 That's some fun 😉

Can you link all the gear in the description somewhere please? I'm gonna start printing them tomorrow

@BestDamnEDC

3 жыл бұрын

... everything is linked.

@petercarney5928

3 жыл бұрын

@@BestDamnEDC oops didn't see it. Thanks Taylor

I was hoping someone would make this video!

I saw the thumbnail & title & I was like ah shit here goes Tay Tay with his 3D printer. Then I pictured Jeremy shaking his head and saying ain’t no patina patina patina on that

What filament is that

I’ve wanted one forever. Just never pulled the trigger on one

You didn’t add your download for the pry bar

Someone needs to print multitool holster

So cool All ways wanted a 3 d printer

Taylor - *Drops 3d printed utility knife* Friend "WOAH SIIICK" now thats what i call support

That MARAUDER 2 is crazy

How much I wanna buy it

What's the validity of 3d printing knife scales? Is it just not good and that's why I don't see any or just no one's going it?

Can you use some other materials or different colors?

@BestDamnEDC

3 жыл бұрын

Yep! I plan to, just need to get my footing with the basics first.

It would be cool to make some scales for a knife

here comes a new 3d printing tab in the disc

A 3D printed EDC pen that can handle Parker, Fisher, and Zebra refills would be cool. A carbon fiber plastic space pen ...now that would be something!.

Are any of those flashlights USB powered?

What song does he use for the b roll shots and credits?

@greebo_2271

3 жыл бұрын

Tigerblood Jewel - Crate Digging ( i Shazam alot of vids when i like the music)

How about a pen shaped spike with a pen cap to cover the spike?

the wallet link is down can you reupload it?

I think it would be cool to make some sorta Burnley cypop?? And a money clip.

How about a weekly episode titled BEST DAMN 3DC

If you want to make your life easier try the Cura slicer from ultimaker it Supports almost every 3d printer currently on the market and it has a ton of settings for printing

iPad Pro is a beast every time I watch videos in the dark and someone is switching on a high power flashlight I get blinded by the iPads display. Never had this before.

Christmas gift idea video coming soon i hope!?

I dont know why I got a 3d printer ad before this vid. Its pretty weird.

@luiscroft9103

3 жыл бұрын

I just got a bunch of Olight ads lol.

what watch is he wearing?

Careful with that 3d printed utility knife, in some designs the blade can cut through the handle and cut you during use.

maybe some cool knife scales with your logo

You can't 3d print a torch, but you could print a holster for you torch to clip it to your belt.

Flashlights are easy... I started with a light by a member named mussy 9 volt 3 led no resistors, since then I have been designing and printing my own prototype flashlights... Mussy also has a lot of firearm parts and survival related designs...

You need to print a Best Damn EDC challenge coin!