Hyundai i800 D4CB Engine Fuel Injectors Removal
Автокөліктер мен көлік құралдары
Hyundai i800 D4CB Engine Fuel Injectors removal is shown in this video as a tutorial, for windscreen water deflector, wiper arms, wiper motor with the linkage removal click on the link given below:
• Hyundai i800 2011 Fron...
Disclaimer:
this video only contains tips and recommendations that could be useful when carrying out vehicle repairs or replacement parts, STANHOPE AUTO REPAIR CENTRE WARDAK is not liable for any damage, harm injury or property damage incurred while carrying out repairs or replacement that are a result of incorrect use or misinterpretation of the provided information purposes only and does not guarantee achievement of specific result. The user is personally liable for incorrect use of repair equipment, tools or vehicle parts, in particular, when this use poses the risk of injury. STANHOPE AUTO REPAIR CENTRE WARDAK strongly recommends being careful and adhering to the safety rules when doing any repair or replacement.
Пікірлер: 29
Excellent - I'm in New Zealand with the same van (the passenger version is called the iMax, the trade version is the iLoad here) so can't use your services but I appreciate your answering questions. That in itself puts you in the top 1% as most ignore good questions. All the best.
@stanhopeautorepaircentrewardak
5 ай бұрын
Thanks for watching our channel
I live in Scotland and if I ever need engine work done on my iload, I will be bringing it down to you, excellent attention to detail. Thanks for the video
@stanhopeautorepaircentrewardak
Жыл бұрын
I appreciate that. Thanks for watching our channel ☺️
Great video. Thank you
@stanhopeautorepaircentrewardak
Жыл бұрын
Thanks for watching our channel 😊
You may use 22mm injector socket to remove it.
Great video thank you very useful
@stanhopeautorepaircentrewardak
2 жыл бұрын
Thanks for watching our channel 😊
@sjkang4601
2 жыл бұрын
@@stanhopeautorepaircentrewardak what is the brown hose? is it vacuum? or penetrating oil? or compressed air to blow out
May I know what kind of socket to use in dismantling injector?
@stanhopeautorepaircentrewardak
7 ай бұрын
Thanks for watching our channel . I didn't dismantle any injector in this video. However, dismantling an injector is not a DIY or garages task who they do the service and maintenance work.
Great video thankyou for sharing, why did you not use an injector puller tool? also what kit did you use to blank the fuel lines when removing the pipes? thanks
@tadejfu
Жыл бұрын
for using that he would have to remove the solenoid which in turn means recalibrating the injectors or replacing them
Why does the injector need to be recalibrated if the slide hammer is used? Just curious for the rationale. I used a slide hammer to shift a bosch injector on a volvo xc70, once I put it back together it seemed fine.... I guess it might not be. But i can't see what calibration you can do at the top end of the injector, other than changing shims?
@stanhopeautorepaircentrewardak
2 жыл бұрын
Thanks for watching our channel First to use the slide hammer you will need to remove the injector solenoid, as soon as you remove the injector solenoid the injector calibration has altered compared to the rest other injectors, secondly the force and impact of slide hammer will definitely effect the injector calibration, thirdly removing an injector with slide hammer highly likely to damage the threads of the injector body where the solenoid fit to, fourthly tightening the injector solenoid to correct manufacturer specifications has direct impact on the injector calibration, injector solenoid tightening torque specification only available to the injector rebuilder shop, fifthly on this particular vehicle injector no.3, and 4 cannot be removed connecting the slide hammer to the injector high pressure connection (high pressure fuel input port) you have to remove the injector solenoid, calibration spring, shim register nut etc, then you will be able to connect slide hammer to the injector
@frankfisher99
2 жыл бұрын
@@stanhopeautorepaircentrewardak Thanks, I can see that stretching the threads, even slightly, could affect calibration, but why would simply removing the solenoid do it? Regardless I'm sure you are correct, I'm just trying to figure out the theory. BTW, if you do remove one injector in this way, if replacing with a recon, would the whole set need to be recalibrated or is a reconditioning process supposed to set standard parameters?
Hi is the same procedure in d4cb hyundai motor?
@stanhopeautorepaircentrewardak
2 жыл бұрын
Thanks for watching our channel Watch both parts of the video and you will see similarities and the differences between the two engines as you will see how did i use and installed Kia sorento engine to Hyundai i800 D4CB.
Hello,how do you do?
@stanhopeautorepaircentrewardak
6 ай бұрын
👍
How did you removed the injector?
@stanhopeautorepaircentrewardak
7 ай бұрын
Watch the video to the end, and you will be able to remove your car fuel injector.
What a nightmare with 4 injecto screw how you take out?
@stanhopeautorepaircentrewardak
2 жыл бұрын
One screw was broken and i later took the camshaft carrier to the engineering shop and removed it and restored the screw treads.
Don’t have to take off the wiper motor, not necessary
@stanhopeautorepaircentrewardak
4 ай бұрын
You have not dealt with this engine injector. Otherwise, you would have known. This engine is from kia sorento, installed on Hyundai i800, which you won't be able to remove injector No. 4 without removing the wipers' arms plus rain water repellant.
Don’t bother saving the injectors install new ones
@stanhopeautorepaircentrewardak
4 ай бұрын
You talk rubbish.