Hyundai Elantra Spark Plug Replacement Tutorial

Автокөліктер мен көлік құралдары

Learn how to replace the spark plugs on your Hyundai Elantra (2011-2018) at home with common hand tools on my 2013 Hyundai Elantra GT
Amazon Affiliate Link(s):
Spark plugs: amzn.to/3g7Xady
Spark plug socket (5/8): amzn.to/2PK4M8r
Spark plug gap tool: amzn.to/3tuGRuk
Spark plug gap tool (Iridium): amzn.to/3EskEDn
10mm socket: amzn.to/3TEoKwu
3/8 ratchet: amzn.to/3kqtsy7
6" extension: amzn.to/3TBh0va
Extendable magnet: amzn.to/3UxkVum
Torque Wrench: amzn.to/3E91dyc
Note:
Spark Plug gap for my 2013 HE GT: 0.044in
Disclaimer:
I am not an expert, just an average Joe who enjoys DIY'ing. Learn, Save, DIY assumes no liability for property damage or injury incurred as a result of any of the info from this video. Use this information at your own risk. Due to factors beyond the control of Learn, Save, DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Learn, Save, DIY.

Пікірлер: 56

  • @habibah2702
    @habibah27022 жыл бұрын

    I can honestly say this is no doubt the BEST Video (for me) I've seen for this job!! I don't need to look at another video. No fast talking and no language barrier, hallelujah! As a woman, attempting to replace the coils & spark plugs in my 2013 Hyundai Elantra because I'm tired of getting ripped off by mechanics, I deeply appreciate you being detailed and not rushing this video. All I need is one more item 🔧and I'm ready 😊 Thank you so much!

  • @learnsavediy

    @learnsavediy

    2 жыл бұрын

    I'm so glad it was helpful. My goal for this channel is to help every single person feel comfortable with home/auto repair so thank you for your kind words. Let us know how it goes! Cheers.

  • @ionnahouser7836

    @ionnahouser7836

    2 жыл бұрын

    I’m a woman and I hear you loud and clear they just gave me a quote for $485 to change coils and spark plugs. Nopeee.

  • @learnsavediy

    @learnsavediy

    2 жыл бұрын

    @@ionnahouser7836 Yikes! I understand they need to make money but for $30 in tools and $30 in parts you can save a heck of ton by doing it yourself!

  • @johnsummers385
    @johnsummers385 Жыл бұрын

    The best way to put the spark plugs in is to stick the top end of the plug inside of a slightly snug fitting vacuum type rubber hose ( approximately 6 inches long ) and begin threading it back in . After several turns and there's no type of resistance , you'll know there's no cross threading . remove the rubber hose ; then you can use the ratchet to finish tightening the plug. NEVER begin installing the plugs with a ratchet or any other power tool . This is overall a Great How To video .Thanks

  • @jaidyn.m

    @jaidyn.m

    Жыл бұрын

    well i don’t have nothin else to use so i am

  • @AnthonyVercillo
    @AnthonyVercillo10 ай бұрын

    Worked like a charm! Thank you for putting this on here!

  • @learnsavediy

    @learnsavediy

    10 ай бұрын

    You’re very welcome! More Hyundai videos coming in the next few weeks

  • @amb7247
    @amb72472 жыл бұрын

    I always wondered how to take off the connector without breaking it. Hope it's that easy when I do mine.

  • @jakemailes1448
    @jakemailes1448 Жыл бұрын

    this is great, thank you!

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    You’re welcome!

  • @PRO4XKEV
    @PRO4XKEV Жыл бұрын

    It is best to replace Iridium plugs and other plug types at every 60k-80k miles.. especially turbo engines.. the Iridium, and Platinum plugs coating on the electrode burns off and the gap of the plug increases through time. New plugs ensure better fuel mileage and better engine performance. The plug gap from factory is just fine at .040 the variance is .040-.045. It is not worth the risk of damaging a plug just to make that wider gap which is just a fraction amount. NGK says DO NOT use anti seize on the plug threads. Torque for plugs is 15ft lbs-20 ft lbs, so 18 ft lbs is best. This is a good video, well done.

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    Thanks for the great tips suggested and I'm glad the video was helpful! Cheers

  • @ashsterling7124
    @ashsterling7124 Жыл бұрын

    Same car I’m at 106,500 and engine flicking today and lagging . Thank you for this video

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    Glad it was helpful!

  • @big_daddya146
    @big_daddya146 Жыл бұрын

    Great video but the problem I had was that the white thingy that is under the curved part(where the spark happens) was short and stubby then the original one which was longer, it caused my engine to run louder but got the same exact look-a-like ones and car runs great now

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    Interesting. I know most cars are very picky with spark plugs which is why I always go with OEM parts like I did here with the NGKs.

  • @toddt6730
    @toddt67309 ай бұрын

    I've heard that you can take out the threads of the head with those plugs, has anyone seen this?

  • @HandleU
    @HandleU Жыл бұрын

    Thank you!!!

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    You bet! Cheers

  • @MrMido7arakat
    @MrMido7arakat4 ай бұрын

    Hi Sir, thanks for the illustrative video. I wonder if you can shed some light on the difference between the two (spark plug) gap tools you included in the description? Thank you!

  • @learnsavediy

    @learnsavediy

    4 ай бұрын

    Happily! The first link is for non iridium plugs and the second is for iridium plugs. In my video I very carefully use a non-iridium gapping tool to gap an iridium plug. Most people will say not to do that but I’ve done it all the time. Some people are anti gapping iridium plugs at all because the tips are so sensitive to breaking and even some manufacturers say not to. So, long story short, either works but just follow what the manufacturer recommends.

  • @baltazarcisneros4730
    @baltazarcisneros47302 жыл бұрын

    very useful

  • @learnsavediy

    @learnsavediy

    2 жыл бұрын

    Thank you

  • @allisonmerritt5062
    @allisonmerritt50626 ай бұрын

    I hope you see this comment, can you do a gapping video from the side? We could only see from the top of the spark plug, and I’m confused as to if the gap is supposed to be on top of the iridium piece as well… Does the edge of the gapping tool go over top of the iridium piece, or beside it when gapping?

  • @learnsavediy

    @learnsavediy

    6 ай бұрын

    Hopefully this works in the interim. Here’s a close up of an iridium spark plug: www.google.com/aclk?sa=l&ai=DChcSEwjgjdXA4umDAxW9Cq0GHdJKDhUYABAzGgJwdg&gclid=EAIaIQobChMI4I3VwOLpgwMVvQqtBh3SSg4VEAkYAyABEgJdmfD_BwE&sig=AOD64_1bHCITEGN5aJWRGytuRHfPulkBvQ&adurl&ctype=46&ved=0CAYQz7YHKBlqFwoTCNi7kMbi6YMDFQAAAAAdAAAAABAD&nis=8 There’s the side electrode (that bends over) and the center electrode (the pointed piece below it. You bend only the side electrode up or down. You put the gapping tool on top of the center electrode and under the side electrode so that you can measure that gap (qph.cf2.quoracdn.net/main-qimg-837ce0a79004aea3160613fdf39708e3-lq). If a video would be helpful still, I’ll make one :)

  • @MrCliffda3rd
    @MrCliffda3rd11 ай бұрын

    Since I dont have a torque wrench you just tighten the plug til you can't turn it? I just tighten bolts til they snug when replacing the throttle body in my old car 2010 Cobalt. I now have a 2018 Elantra 2.0 NU planning on changing the plugs myself.

  • @learnsavediy

    @learnsavediy

    11 ай бұрын

    Really hard question because everyone’s strength is different so there will be a lot of variation in the actual torque. What I do for plugs if not using a torque wrench is to tighten until barely snug with a ratchet and then a 1/8 to 1/4 turn more. The specs are less than 20 lb/ft so you don’t want to go too strong on it. Hopefully that helps?

  • @lazybeachbum9394
    @lazybeachbum9394 Жыл бұрын

    Besides the gap tool you used, what's the proper one for these tips?

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    Wire gauges (amzn.to/3P8YV99) are typically designated for iridium and platinum tips but I've never had an issue using the generic kind.

  • @alisonfalby574
    @alisonfalby5742 жыл бұрын

    Yesssssd

  • @giwant2003i
    @giwant2003i Жыл бұрын

    What about the coil pack? Will the check engine light let you know if a coil pack needs to be replaced?

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    It can. Usually would be a misfire. You can test it by switching the coil packs and seeing if the misfire goes away

  • @anitagreen8171

    @anitagreen8171

    Жыл бұрын

    Mine does i have a 2017 Elantra SE

  • @Dan_kraken
    @Dan_kraken3 ай бұрын

    Question, does it matter using bosch or ngk for a hyundai elantra 2017 eco? I'm having a hard time finding the answer. I bought bosch, but you're using ngk. Hoping I didn't mess up buying bosch over ngk 😅

  • @learnsavediy

    @learnsavediy

    3 ай бұрын

    I’ll be honest with you. I’ve only heard good things about NGK so it’s my go-to. I’m not sure about Bosch. As long as it matches the part number in your owners manual, then you should be good.

  • @Dan_kraken

    @Dan_kraken

    3 ай бұрын

    @learnsavediy I tried looking at the owners manual for it, and I couldn't even find the torque for it. Maybe I'm not looking correctly but I used find and looked up spark plugs. There's little to no info on this on the owner's manual for spark plugs from what I've looked through.

  • @nycliving5798
    @nycliving5798 Жыл бұрын

    Can a 3/8 socket work on a 5/8?

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    3/8 socket is a different size than 5/8 so no. Did I understand your question?

  • @robertbromley908
    @robertbromley908 Жыл бұрын

    Do u use dialectic grease

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    I didn’t but you are more than welcome to do it to prevent corrosion

  • @parsonsdattruth7589
    @parsonsdattruth75892 ай бұрын

    You’re the first I seen bend the spark plug 😕

  • @learnsavediy

    @learnsavediy

    2 ай бұрын

    Pretty cool huh? All kidding aside, it is optional. I was always taught to gap EVERY spark plug to spec but some folks have said they don't gap iridium tipped. I just replaced all 16 spark plugs with iridium on my Jeep without gapping and haven't noticed any issues so either way seems to work. I guess with that said no need to gap!

  • @FirstClass-
    @FirstClass-2 жыл бұрын

    ..... sooooo how did you manage to remove the #4 coil pack through the high pressure fuel lines?

  • @learnsavediy

    @learnsavediy

    2 жыл бұрын

    Thanks for your question. I don't remember having any issues with clearance when trying to remove the coil or plug. I removed the wiring harness from each coil so nothing would get hung up but no issues with the fuel lines.

  • @sday71923
    @sday719232 жыл бұрын

    How long does your car need to be cooled before changing spark plugs

  • @learnsavediy

    @learnsavediy

    2 жыл бұрын

    At least until the engine is cool to the touch. To be on the safe side 3-4 hours.

  • @USMC-es4yy
    @USMC-es4yy Жыл бұрын

    That's strange you had to Guage those exact plugs cause if you bought them for that specific model they should have came at .44

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    You’re absolutely right. You shouldn’t have to since most plugs come “pre-gapped” but I’ve never had a package all the exact gap so I like to take 5 minutes and make sure they are all consistent and accurate.

  • @pete9688

    @pete9688

    7 ай бұрын

    Mine came already gapped.

  • @BleedCubbieBlue77
    @BleedCubbieBlue77 Жыл бұрын

    Replaced coils and spark plugs reconnected everything but car still skipping sometimes while accelerating

  • @learnsavediy

    @learnsavediy

    Жыл бұрын

    Any check engine light? Any other symptoms?

  • @BleedCubbieBlue77

    @BleedCubbieBlue77

    Жыл бұрын

    @@learnsavediy right now it skips kinda shaking when trying to accelerate. No engine light. Was getting misfire error p0303 changed plugs cleared error. But still having the skipping and sputtering

  • @alc4440

    @alc4440

    Жыл бұрын

    ​@@BleedCubbieBlue77 I am having the exact same issue on a 2015. Same code. No check engine light. Replaced all spark plugs. How did you resolve your issue.

  • @raviteja5099

    @raviteja5099

    5 ай бұрын

    Change the ignition coil

  • @nukenridge4921
    @nukenridge4921 Жыл бұрын

    P0016 code on 2015 hyundai elantra

Келесі