Got a 51 given to me that needed a cylinder. Didn’t port it, but set it up without the base gasket. It’s a solid little saw. Nice one to add to my collection of Stihl’s.
@Finom1 Жыл бұрын
Bellhopper, God Bless and Protect you and your loving family:) I love spending time with you:)
@michaelwhiteoldtimer7648 Жыл бұрын
Thanks for sharing, it’s always interesting to see how you build saws
@simpleman4224 Жыл бұрын
Another ripper from the hopper bench! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
@seather863 Жыл бұрын
Nice build Hopper! Thanks for sharing.
@VicsYard Жыл бұрын
That’s awesome. One of my favorite saws is the 55. Great size for working.
@justinweaver8787 Жыл бұрын
Sounds like a beast sir i have no doubt.
@lonnieholbert88988 ай бұрын
I have a 50 that was giving to me scored to hell. I converted it to the 55 and ported it. Wouldve like to go a little farther with the open port transfers but was leary. Only had 20 degrees of blowdown.
@DaveyBlue32 Жыл бұрын
Those Stay-Silv silver brazing rods are really nice quality too… it’s great stuff! Stumbled across some with some shop tools and equipment that a guy wanted hauled off… I’m glad I went through everything and that I didn’t just toss everything… I hated tossing off the old drum cutting lathe but I couldn’t find anyone who had any current use for it???
@smoth0p3ratorc58 ай бұрын
Great stuff!
@johnarnettsways.8758 Жыл бұрын
Great saw and a solid build my friend. What size pin sprocket are you using? See ya Saturday my friend. ❤️🌲🪓👊🏻🙏🏻
@settlersaws8338 Жыл бұрын
Nice job buddy
@Tcw20198 ай бұрын
I’d love to buy a ported 51 if you ever have another!
@woody1755 Жыл бұрын
Heck yeah! That's killer!
@iraagans3144 Жыл бұрын
Thats a neat little saw, did they also come with a old closed port?
@leifvejby8023
Жыл бұрын
No, but you could mount closed port cylinder from Partner 5000 - 5500 or Jonsereds 490 - 590, and get quite a screaming saw.
@charlesmason1278
Жыл бұрын
Some 55 saws had closed, some open. the rancher was open, the EPA version was closed. I have one of each sitting on my shelf. I don't think the 51 was available both ways, but I could be wrong.
@woody1755 Жыл бұрын
I know that smell I burned 3" of my beard off soldering a water heater under a house once🤣🤣
@smackevans3695 Жыл бұрын
She going to be a good cutting saw buddy
@smackevans3695 Жыл бұрын
I need 2 of those built lol
@christopherwest584011 ай бұрын
Nicely done. Did u put it in some wood?
@kevinjones2667 Жыл бұрын
❤ from pnw oregon
@lennie8098 Жыл бұрын
Why didn't you go with the closed port cylinder, and the pop up piston?
@easingrapod12749 ай бұрын
Hi. it can also be replaced with a stihl 028 type piston without any changes?
@dbrdetailing9664Ай бұрын
Hey cylinder meteor itally do husqvarna 55 good kits ?
@mattkomar8372 Жыл бұрын
Hey bellhopper! I've taken a little Hiatus from KZread but question for you a Husqvarna 351 in pretty good if not almost mint condition from a reputable person. He wants 350 but said he will take $3 25. All my buddies are breaking my stones saying how it's not worth it but I don't know man what's your opinion? And what size bar you think I could put on there to rip some wood? By the way I hope everything with your back is going well! It's been that long! LOL
@bellhoppersaws
Жыл бұрын
Its basicly a larger 346 some people turn them into 346 its a pro saw with a mag case they usually sell for around 5 bills in good shape. When ported they are stout and 18 is bout as far as i would go
@grayhawk-bh6bw Жыл бұрын
What % silver do you use for the exhaust?
@bellhoppersaws
Жыл бұрын
Its saftey silv 45 buddy
@grayhawk-bh6bw
Жыл бұрын
@@bellhoppersaws Thanks hopper!
@scottwilcox6741 Жыл бұрын
On a Husqvarna 55 can you put a 61 piston and cylinder on it
@johnsonlong1272
Жыл бұрын
I won't say you can't but it won't bolt up to stock holes.
Пікірлер: 36
Thanks!
@bellhoppersaws
Жыл бұрын
Thank you buddy you rock
Got a 51 given to me that needed a cylinder. Didn’t port it, but set it up without the base gasket. It’s a solid little saw. Nice one to add to my collection of Stihl’s.
Bellhopper, God Bless and Protect you and your loving family:) I love spending time with you:)
Thanks for sharing, it’s always interesting to see how you build saws
Another ripper from the hopper bench! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
Nice build Hopper! Thanks for sharing.
That’s awesome. One of my favorite saws is the 55. Great size for working.
Sounds like a beast sir i have no doubt.
I have a 50 that was giving to me scored to hell. I converted it to the 55 and ported it. Wouldve like to go a little farther with the open port transfers but was leary. Only had 20 degrees of blowdown.
Those Stay-Silv silver brazing rods are really nice quality too… it’s great stuff! Stumbled across some with some shop tools and equipment that a guy wanted hauled off… I’m glad I went through everything and that I didn’t just toss everything… I hated tossing off the old drum cutting lathe but I couldn’t find anyone who had any current use for it???
Great stuff!
Great saw and a solid build my friend. What size pin sprocket are you using? See ya Saturday my friend. ❤️🌲🪓👊🏻🙏🏻
Nice job buddy
I’d love to buy a ported 51 if you ever have another!
Heck yeah! That's killer!
Thats a neat little saw, did they also come with a old closed port?
@leifvejby8023
Жыл бұрын
No, but you could mount closed port cylinder from Partner 5000 - 5500 or Jonsereds 490 - 590, and get quite a screaming saw.
@charlesmason1278
Жыл бұрын
Some 55 saws had closed, some open. the rancher was open, the EPA version was closed. I have one of each sitting on my shelf. I don't think the 51 was available both ways, but I could be wrong.
I know that smell I burned 3" of my beard off soldering a water heater under a house once🤣🤣
She going to be a good cutting saw buddy
I need 2 of those built lol
Nicely done. Did u put it in some wood?
❤ from pnw oregon
Why didn't you go with the closed port cylinder, and the pop up piston?
Hi. it can also be replaced with a stihl 028 type piston without any changes?
Hey cylinder meteor itally do husqvarna 55 good kits ?
Hey bellhopper! I've taken a little Hiatus from KZread but question for you a Husqvarna 351 in pretty good if not almost mint condition from a reputable person. He wants 350 but said he will take $3 25. All my buddies are breaking my stones saying how it's not worth it but I don't know man what's your opinion? And what size bar you think I could put on there to rip some wood? By the way I hope everything with your back is going well! It's been that long! LOL
@bellhoppersaws
Жыл бұрын
Its basicly a larger 346 some people turn them into 346 its a pro saw with a mag case they usually sell for around 5 bills in good shape. When ported they are stout and 18 is bout as far as i would go
What % silver do you use for the exhaust?
@bellhoppersaws
Жыл бұрын
Its saftey silv 45 buddy
@grayhawk-bh6bw
Жыл бұрын
@@bellhoppersaws Thanks hopper!
On a Husqvarna 55 can you put a 61 piston and cylinder on it
@johnsonlong1272
Жыл бұрын
I won't say you can't but it won't bolt up to stock holes.
@scottwilcox6741
Жыл бұрын
@@johnsonlong1272 thx