I have the open port 55. I love the saw and I just finished it. Hasn't even broken in yet! But hopefully it gains a little. I'm planning on porting the original cylinder with a new piston and see how that works but I'll have the one that's in it now just for backup in case I fubar it. Haha.

Thanks Jason

I've always liked the 55. They sold lots of them.

I have a saw that started life as a 51, that when I took posession had a scored piston and cylinder, that now holds a 55 piston and cylinder (which had a cracked case). Both saws were given to me becuase they were "scrap" :) People are always surprised how well it works because it still says 51 on the recoil cover. Have been debating on playing with the transfers lately.

👍 give it to whomever your heart desires.

Good little firewood saw for sure I have a 51. Make sure you check the round rubber seal for the impulse 🔧🔧

Glad your back and makin more videos

Glad to see ya made it back from Alaska man . Been checking the tube every night getting bored with the no boedy content

I love my 98 55 Rancher, pulls a 20” bar well after a muffler mod. Always wanted to get another 55 to modify and compare how much they really wake up after the 028 piston or if it would be better to stock bore it with a base gasket delete as I know marginally about porting. Definitely my favorite saw to run for its power/weight even being 25yrs old and it’s still dead reliable even being 100% original aside from the muffler mod.

High tops are great saws ported up, nice 55

I like that your back, your videos are part of my lineup. The real TV! Great content. With Humer. Thanks

I got a pooched 55 in in the shed. Might have to pull it apart out of curiosity

Sooo glad to see the 5x series saws.

Poulan 3300s are nice saws!… got 2 of them. One was a freebie the other cost me $20. Gave them a little fix up, took the baffle out of the mufflers and, they rip!

Glad your back

Hyway has the 46mm windowed piston also.

That’s a clean looking 55. I’m sure you’ll make a good runner out of it.

I like the counter-vibes, but the aluminum bore/chrome piston 3300 looks interesting.

Love the hoodie!!!!

You REALLY need to learn how to sharpen that beautiful knife. It doesn’t deserve to be dull!

That 55 looks like it's in great shape! So awesome of your subs to be gifting parts for giveaways! That poulan looks like it'll clean up pretty good aswell😎👍🏻

Glad to see you back

Very nice!! Now I am on the hunt for one

Ima be wantin' that saw...bad!

The later grey top 50’s can except the bigger 55 cylinders to, the 50 specials had the same 45mm open port topends as the 51. The Husky 49 was a partner based saw , clam shell desighn. Good saws though with good power.

I have a 3300 I bought online a few weeks ago. After putting alot of work into a saw that "runs as it should" I think it's running close to good. It pulls chain kinda like torqu-ee.

i got a ms400 a few months back after 35 years of stihl, i wrote an email about my low bar oil output to customer service. they gave me a bs reply. so i updated my 026 saws with a 550xp. u are correct the guys at stihl are a bunch of weirdos!

Your saw is your call.

I would love to see what you could to the open port 55, to step it up a little. Do a series on it! I bet that would get a lot of views!

That saw has seen less use than my 55 Rancher. It still rings great. Use it to cut up trees for firewood. Wood over 16 inches I fire up the Stihl 461. The 55 can handle it, but the 461 eats big wood like it’s balsa wood.

That sure is a nice knife

Braaap ! Ting ting ting braaaaaap I have the 51 baby yeah

That's Awesome! Man, I need to catch up. Even open port 55's are a nasty little shit. I didn't know they had a closed.port model. This will be Very interesting!

Like I said before... lots of new toys! Give-a-ways....Your saws, Your rules👍

Welcome back

Husqvarna did have a 49 but I not sure if it's on the same chassis👍🆙BigGuy

intersting stuff,,thats a clean 55🙂

You can get it to run . Then port & polish . Then dyno

I have some stuff I need to bring you I don’t need anymore. Lots of parts.

Put some new rings on the old piston.👌

Partner 5000 plus is 44mm closed port the husqvarna 55 had the epa 46mm closed port.

Send the Poulin 3300 to Tazman 👍

G’day, I’m going to look at a 55 Air Injection saw tomorrow. Owner wants $120 Aust and looks to be in excellent condition. My first Husqvarna.

@Doc-Cole_Trickle-of-Chainsaws

Жыл бұрын

Hey Andy, did you get the 55 and if so how did it go?

@AndyH-13

Жыл бұрын

@@Doc-Cole_Trickle-of-Chainsaws Hi Darin, Sorry about the real late replay. I did pick up the saw. It looks like new and runs great. Only Husky saw I have.

@Doc-Cole_Trickle-of-Chainsaws

Жыл бұрын

@@AndyH-13 I'm hoping I come across one some day! I've been looking at a scrap yard regularly trying 2 find some treasures. Found a Poulan 2775(just needs ❤ and fuel lines)🤞and a robbed Husq 350 carcass.

@Doc-Cole_Trickle-of-Chainsaws

6 ай бұрын

​@@AndyH-13Hey AH, You been doing OK? Hadn't heard from ya

What all mods need done to install the 036 pistons?

I sure hope I’m that special subscriber Be pretty cool

Put me on the I want it list please.

😁

Comment from me