Got my tuner in the mail today. I must say programming is the most overwhelming part of a automotive build to me. I have so much more to learn 😬 Hats off to you tech guys for your guidence.

@RowdyEnt.

3 жыл бұрын

@@Anthony-kd5ku Small adjustments. Iam currently working on a 86 fiero with a 2008 3800 turbo engine. Also a turbo chevy sonic. Soo much to learn and so little of summer months lol. Hope you figure it out, join a few forums and soak all the info you can. So many people are willing to help.

@S.Rock80

2 жыл бұрын

Yep got my brain running in overdrive, until I started to play and understand what I'm looking at. With that said think I need to bring back the good old carburetor days on my 09 silverado, put big cam in truck 👍 need more fuel no problem put larger jets in with a screwdriver, done. Need more air put on bigger carb, done. Pull out screw driver to adjust power valve, done. 😎👍 now it's like 🧑‍💻🤔😥🦧😖

Wow, never think you know everything. Thx for the valuable input Alex and HPtuner team

excellent content. a large cam does in fact cause misfire, which is what gives you the chop chop. you can start to hear lope over 10% misfires, it's not necessarily 100% misfire

WOW, I was a dealer tech for 25 years, got out in 2011, I knew/know a lot and was getting into basic programing at the dealership but this... just blows my mind. I just got an MPVi3, to dial in some things that bother me with my 17 Yukon, I think it's going to take a while to get this figured out.

The one thing that makes hptuners a winner is not locking the owner to a tuning shop. Options are good.

I was hoping the OS tab was more than just a directory of patches. What patches are available for Gen 2 Viper?

Does HP tuners offer an online in depth class to understand tuning with the software?

Is the advanced view have any advantages for a Gen 3 6.0 N/A that is basically stock.(small BTR Truck Torque Cam)

I loved the simplicity of my old efilive V7 was the windows XP of tuning software then they fuked it up with the new V8

How do i tune with a gen 1 2001gmc that does not have a ve table?

My data looks good for my 300 before the ripp kit goes in. Just did some driving with it.

Can you o into fords like this pmease

esse scanner é livre de crédito ?

Hey guys i hope this doesn't get lost i have a dumb beginer question. Ok so lets say that i have a computer that has been damaged a bit or has had some codes erased or otherwise not working for the car (but the computer is still good) and i want to RE-install all the drivers or codes for said computer, how would i do this, and is it possible to kinda do a factory reset sort of deal or just reinstall everything from scratch???? Like reprogram the computer as if it where brand new from the factory.. you guys know what i mean.. thank you all so much in advace for all ur help.

If there is not an existing tune for my car can I still edit the spark/timing table myself (yes the car is compatible but I cannot find any existing performance tunes for it)

@WillEagleton

Жыл бұрын

Start by saving your stock tune, and then make a copy of it.

👌🏼

Does anyone know if you can push through emission flags to PASS using the tuner. I haven’t found anything.

@allanb3222

3 жыл бұрын

No you can not, you can only disable the codes for them.

Not sure I understand this whole credit thing/situation. Is it one credit per vehicle for life, or per module, or per edit or what? I'm used to stand alone EMS, buy once cry once and done.

@WillEagleton

Жыл бұрын

Vehicles I believe are 1-2 credits based on complexity, automatic trans tuning may eat another credit? (I have a manual).

Am I able to send in my file to hptuners and have them tune it better than I could ?

@HPTuners

3 жыл бұрын

Unfortunately that is not offered. We do not offer any calibration services

IIm not getting exactly what he is doing to cause the numbers entered to change o0n the table. i do not see which icon he clicks to make the change

virtual volumetric efficiency table editor

Not gonna lie I'm completely lost with tuning. I understand how to build the vehicle and I understand the concepts of what's going on but it's all super overwhelming to me as of right now. Gonna keep viewing and taking notes before I start anything on the vehicle.

@carnut351cleveland9

Жыл бұрын

In the exact same boat. I see your comment was about 6 months ago. How are you doing now? Are there any other helpful videos for a beginner you can share? Thank you!

@18georgedavis

Жыл бұрын

@@carnut351cleveland9 I'm getting a little better grasp on it. I kinda screwed myself because I started adding more changes to the truck before driving and messing with the tune more and getting comfortable. I added a turbo. Did a 4l80e swap and done a regear so made some major changes that I feel like I should have waited on. I'm finishing everything up now. But watch goat rope garage. He really good at breaking things down. Talks a lot about some off topic stuff but really informative

@carnut351cleveland9

Жыл бұрын

@@18georgedavis That's what I'm trying to avoid, getting too far ahead of myself. That's awesome, it sounds like you're gonna have a sweet car. Thank you for the recommendation, I'll check him out.

Edit tab it’s under

Im a mopar guy and seems like all of these help videos are always for GM. Mopar is completely different. Options and tables are different. Several things shown for GM aren't even on the Mopar stuff. Its laid out different and several things in GM don't exist on the Mopar side

@fomomofo6917

2 жыл бұрын

Probably because GM is the most common to tune with LT and LS swaps and such. Also many Mopars have a locked ECM and require an unlocking service to deter people from tuning.

Mhen dis is so complicating