starts at 4:20

Friggin Awesome!! U answered so many question I had. Thanks a ton for making this!!

Thanks this was helpful. More than likely will have to watch again.

A lot of great and clear info! thanks!!

Awesome video once again guys! 💪

@jasons3123

3 жыл бұрын

@Hector Omari No one cares. BTW, it is a federal offense to knowingly break into a password protected device.

Thank you!

Awsum video i would appreciate next time the car would be in the small window and the scanner in the largest window.

Thanks!

My question is, for a late model ford ecoboost what would be the proper steps for logging for speed density? Is there parameters that need to be turned off first since it doesn't have a MAF?

Please make more videos!

Can I ask you a question about an lt1 from a 97 trans am that has been turbo with no maf sensor?

Can I use hp tuners on a 04 ion 2.2

While on a chassis dyno tune my supercharged. & other engine mods. 18 2ss stops building power at 5,600 rpm! Anybody know what going on ?

Does Paste Special X percent correct both rich and lean errors?

With a fixed cam, wouldnt still need to change cam inputs for fueling?

Hi there thanks for that. Question, since you're using LTFT + STFT , after you pasted your changes, I would have thought you would need to RESET the LTFT's before doing the next Run. Am I misunderstanding something?

@obstuningsolutions8863

2 жыл бұрын

Your correct reset them 👍🏼

HP tuners can tune ford ranger 2.2 continental sid 209?

what do you do for 33 lb injectors

Hello sir. I'm Planning go from a 6.0 to a 5.3 in my 09 pontiac g8 gt? I tried searching around for a 6.0 in good condition ,but they are way too expensive right now. I know its a tacky swap but its all I can afford and plus its my daily driver. I want to see if this Hp tuner item already has preloaded files for certain cars already so that I could copy the 5.3 pcm perimeters to the g8's pcm or do i have to copy a file from a 5.3 vehicle like the 08 impala SS. I've seen this swap done on youtube but he never got into full build details.

@SamSheepDoq

3 жыл бұрын

Grab your OS number from the tune information, then find a 5.3L tune file on the tune repository with the same OS as yours. You can then segment swap the engine parameters to your current G8 tune file, upload the tune to your car, then make any adjustments from there by data logging the new tune.

How u do speed density on a gen 2 coyote

Why won't HPT add Real Time Tuning for Gen 4 GM

Do you not have to disable .ltft and stft before you start so it does not skew the numbers?

@7sins979

3 жыл бұрын

I wouldn't want trim corrections while setting my base VE although maybe there is some wisdom to it on these ecus. on a true VE based standalone I turn closed loop off when calibrating base fueling.

I know this is years too late but, on a training video seeing the actual/modified data screen is 1000 times more important than seeing the vehicle on a dyno or seeing the presenter.

that traditional VE model is really weird if the pressure areas are going to be close. I would expect it to be around 100% VE or maybe a few percent over, not 150% at some points. nice info on how to force VE mode on these ecus though.

I’ve been looking into hp tuners because a friend asked me to possibly tune their suburban but man it just seems so much more complicated than it needs to be honestly. Is there a real-time update? Do we have to flash every single time we make a change? Are there shortcut keys? Quick adjustment keys? I must be spoiled with my native software cause this just seems overly complicated.

@keanandelarosa1329

9 ай бұрын

Some GM ECUs support real time tuning and it definitely helps but otherwise you're stuck flashing every time

@PRZJ91

9 ай бұрын

@@keanandelarosa1329 fuck that sucks lol I really dislike hp tuners 😂😂😂😂😂

16:06 what backup exists in a speed density setup?

btw, 14.7 psig is 101.3 kPag, or 1.013 barg. 1 barg is 100 kPag is 14.5 psig

@mobtlf

2 жыл бұрын

I guess he's so used to talk about the stoichiometric air/fuel mixture for gasoline which are approximately 14.7. Easy to mix 🤔

I'm wondering if the vcm suite is compatible with mobile devices? I had to give the laptop back i was using to flash my pcm.

@SamSheepDoq

3 жыл бұрын

VCM Suite is only available on Windows OS. Maybe one day we’ll see VCM Suite on Android and IOS, though!

@jperdue3567

3 жыл бұрын

@@SamSheepDoq that would be life altering!

@SamSheepDoq

3 жыл бұрын

@@jperdue3567 I would definitely use it for my personal build!

@jperdue3567

3 жыл бұрын

@@SamSheepDoq absolutely!

I wonder is there an online web application like a real time simulator where you can see all of the most common parameters for tuning engines so you could change them to see the result?

@obstuningsolutions8863

2 жыл бұрын

There is something like that I don't remember what it's called tho

@_viy

2 жыл бұрын

@@obstuningsolutions8863 I googled it and haven’t found anything like that At first I thought it’s Micah Diaz))

"Dynamic" tab wont show up on my HP TUNERS. Why ?

Can you zoom in ???, thank

Actually Virtual VE takes more computing power and a VE table is faster but Virtual VE is better for the engine manufacture because it adapts easier to different variations from vehicle to vehicle. Let's say the exhaust characteristics change, or valve diameter changes, a single or very selective group of coefficients need to changed rather than a range or area of settings in a traditional VE table that need to be proved out empirically. .

@njphil1279

3 жыл бұрын

Sorry, didn't want to come across as crapping on your video. I'm self taught at tuning and never took any expensive courses and learned a few things by watching this. Thanks very much

@cmitchell17a1

2 жыл бұрын

@@njphil1279 So you're saying the coefficients are not coefficients of a multi order polynomial, but they actually represent some physical characteristic of the engine?

It would be really nice if someone could cover VVE tuning with a variable cam.

@jdcustomz

3 жыл бұрын

What is your question?

@rileydalton3958

2 жыл бұрын

I also would love a video and learn on vvt tuning. I tried tuning a vvt 5.3 and even on stock tune there was as much as 8 degrees timing retard occuring

@kirbywinters1291

8 ай бұрын

Naw man you gotta lock that thing out and put a hog ass chop stick in there.

what about copying high octane table to low? or not required anymore?

@bmichael1991

Ай бұрын

Still need to dial in timing no matter what you do in your VE tables. Personally I keep the low octane table stock in case you get bad gas

@pawpatina

Ай бұрын

@@bmichael1991 every tutorial says once you are in speed density mode it only looks at the low octane table, thats why you copy the high to the low.

@bmichael1991

Ай бұрын

@@pawpatina if your fine tuning your VE and already running premium then that's fine. But once done I'd put the low octane table back to stock as a fail safe for knock.

@pawpatina

Ай бұрын

@@bmichael1991 but.... the high/lo match is only during ve tuning? then the low table is put back to stock? with no VE adjustments? doesnt make sense to me. My understanding is when you apply the custom OS for NoMaf aka speed density, it converts to use LOW ONLY, meaning there is no more HIGH table... So if you do speed density yourself without applying custom OS in HPT or in tuner pro, you have to copy the high to the low so you get the higher numbers into the low table since thats the only one it will be looking at...

@bmichael1991

Ай бұрын

@@pawpatina I see what you mean. If your running no maf then I believe that's correct. Ive always been taught to tune the MAF first, VE last, then reactivate MAF. I think thats how Goat Rope does his stuff. Learning new stuff every day.

105kpa

I think the intro 1 hour 15 minutes

Little cookie 2

These 1.5 hour videos seem to spend 15 mins on topic and the rest running off on every tangent that can be thought of. When you are actually addressing the setup, doing a continuous setup from start to finish on whichever generation before talking about the alternatives would be easier to comprehend

@SleepinOnU

Жыл бұрын

Easy to go on a tangent when you don’t have a physical audience to engage with. However this comment turned me off on this video at first I then searched numerous others not finding info I needed and came back to and this actually provided me with answers I was looking for. This whole time 🙃

@zachack6408

Жыл бұрын

I appreciate knowing all the alternatives and all the information so I could correctly learn how to tune any type of vehicle. These long videos are great so we can learn as much as we can. And they have them for free

@jeffreydurham5342

Ай бұрын

You get chose the videos you watch, not the content. No one is forcing you to watch something you don't like.

@vrg69

7 күн бұрын

Alot of good info I'm fixing to purchase mpiv3 and wide band and tuning books is there anything else that I need and do yall offer any online classes

To fast to understand anything

HP Tuners is the way to go...just a terrible training video

101.3kpa =14.7psi = 1 bar.