I congratulate him for his excellent, very complete and didactic tutorial. Highly grateful

@regazzz

3 жыл бұрын

Thank you!

even us techies have to look at these vids when were working iwth unfamiliar laptops, i work mainly with Lenovo laptops and the older IBM (before the buyout). so i dont know much about HP this was realy helpfull to me when i watched it thanx. HOWEVER i must point out that an antistatic band is only good if you ground it to an earth yours is not therefore it is renderd usless people using them please make sure you ground them to....

@msbadshah7851

6 жыл бұрын

Khol Kya reya Tu Or kuo

Being a Motorcycle mechanic for over 30 years, I'm really baffled at the laptops today. I waatched a video just now on disassembling my HP Probook S Series and it taught me the quesstion of why does fixing these computers costs so much so I know I will try this rainy someday for myself. Thank You Tube!!!

@regazzz

10 жыл бұрын

Hello Mark Eichenlaub , I would say first off all there are so many people who really think that if let's say it does not turn on - all data is gone. And this is not true, but people are different. Some technicians are greedy. Some of them know that some laptops will have something else broken inside besides actual reason of repair. Something like that.

@TheMarkopolo74

10 жыл бұрын

regazzz I have to say

@TheMarkopolo74

10 жыл бұрын

Mark Eichenlaub I'd like to say that I do appreciate the note and your absolutely correct and we need to not trust just anybody in general. At least I don't because I've been burned hard more than once you know. Can you agree? So just want to say thanks for your interest in the subject. I by no means qualify as an expert in computing, just know how to SCREW one up. Mark in Dayton, OH...

nice vid man, I love the fact that you guys take the time to post these, makes my jobs a lot easier! Thanks.

@regazzz

10 жыл бұрын

Hey! There is no guys, there is only me alone :)

Awesome video @regazz, Just an Fyi guys, you can reuse the screen from a hp probook 6550b or a 6560b and install it in a 6570b or vise versa. they're interchangeable and will give you the same resolution quality. Trust me, I know.

Just got done reflowing a gfx chip. Thanks for the video it was helpful.

hi can you make a video how to install new graphic card with that Model(hp probook 6555b)? TIA

Hi! I have difficulties for picking the right thickness of the thermal pads for the gpu in contact to heat sink. May I ask if how thick does the thermal pads are? Thanks!

bhai iske uper ki chip ko kya kehte ha mere laptop ki kharab ho gai are jiae on krte ha or wifi tuching bali pelt

You never took out the CPU just the heatsink. I am playing around with the idea of upgrading the CPU on my probook 4530s it has a G2 sockcet Type i3-2350M. I am trying to see a video of the CPU coming off after taking off the heat sink does it just go into a normal socket like a desktop and screw into the motherboard or do I need to do some soldering?

Thanks for posting this. Really helpful! :)

great video! any chance you know where i can get a charging connector or at least how to search for one? a model or something. thank you!

Thanx a lot, very useful video. Disassembled 6440p with this one.

@regazzz

10 жыл бұрын

Александр Каверин You are very welcome!

Thank you so much. It helps a lot.

Hello, did you tried to push it in and it may pop out? Or maybe use a pliers to remove it, but this can damage everything.

Never thought about that :) You know, everything is possible if hands are growing out of a right place :))))

I was wondering if there was anyway you could've gotten into where the sim card slot was cause i got a sim card stuck there and i really need it back but im not sure how to get there without taking the whole thing apart. It was right under the battery it says sim with an arrow i stuck it in there and not sure how to get it back out any help please.

Thank you, very helpful. Is there anyway to update the graphics card?

i have a question for you, if you mind. the piece you disassemble on minute 15:30. in my 6555b probook is missing, what is the name of that piece, if there is one, or how can i spot it somewhere on the net. thank you

Hi! I've got the same laptop. It is possible upgrade CPU on it? Now installed an Intel Core i5-520M i want upgrade it to i7-x. Which sATA port has revision 2 or 3? I'm thinking upgrade HDD to SSD. How much RAM that model can have on the board? I read about 8Gb, but saw some comments about 16Gb. Thanks!

ok ill try i have the same exact computer ..in the video so do i just remover the small screws around the lcd casing

thanks guy awesome video!!!

good working

Can you please tell me where the GPU is? Is it possible to replace or upgrade the GPU?

thanks men it help me a lot

if i just wanted to change the screen would i have to remove the keyboard and everything else like you did in the video?

Thanks for the informative video. I was looking for the Bluetooth module & missed it. Where is it? EDIT: found it @1:27 small cover bottom left.

Thanks for the video!

Thank You

Excellent contribution. Thanks a lot¡¡¡¡

I love the fact that if you need to clean tha fan and radiator on this one you just remove the keyboard and the plastic strip with the power button.

Thanks ! Helped alot :)

@regazzz

10 жыл бұрын

GREAT!!! You are welcome!

Motherboard change Karna hai kitna lagega

Which model is the web cam?

You are welcome!!

Great! Thank you!

bro can u plz tell me what tools did u use like the bits and the gun with which u opened it

@regazzz

3 жыл бұрын

Hi man, I don't remember exact bit set name, but I used mostly one bit out of it, some thin philips bit. It was some Husky bit set. The drill is just a regular hand screw driver Skill, but at some point I tried a little Bosch screw driver and it was much better because it had removable battery. The yellow screwdriver tools is Stanley, again do not remember exact model, but it comes in a box of 5or 6 screwdrivers.

thank you so much.

You are welcome!

can you put a tracking device on this laptop , ?

Danke für das Video thanks for the video

you are welcome!

thanks

So to get to the speakers I have to take it all the way apart or can I skip some steps?

@regazzz

10 жыл бұрын

Hello, I would say yes. You may skip CPU removal, but everything what is on the way to speakers should be removed.

You are welcome! Unfortunately GPU is soldered/glued to a motherboard. So it is no. Sometimes, if the same model of a laptop have some more expensive style, than it is possible to upgrade a GPU by upgrading a motherboard (of course you have to make sure it fit and that everything will work finally) but this will be a lot of money...

I can see the four little tabs or whatever as clear as day and have pushed them all down but after that how the hell do you actually take the keyboard off? You made it look really easy but all I've done is pop two keys off (near impossible to disassemble the front of a computer without making that mistake). I think I see the border around the keys and I need something that can fit in the cracks and pry that up but still I'm very confused.

@regazzz

Жыл бұрын

First of all make sure you unscrew couple.of screws holding the keyboard. After that I would try to use some plastic flat tool to lift a keyboard a bit in the middle. Something like that it should work.

@chrisbaker1208

Жыл бұрын

@@regazzz Oh I see now there's three screws on the back that go to the keyboard with little keyboard logos and a arrow pointing at the screws that show that but of course I never knew what those were 🙄 thanks.

Bedankt Thank you

I have a hp probook 4330s which has a gps tracker. Is there chance it could be taken off. I wana sell but no one wan'ts it cause of this...

no problem thnk u bro

Usually it is possible to remove LCD without taking everything apart. Don't forget to take power supply and battery out. Have a good luck!

Yes, it is very rare.

Thanks a lot for putting up this video. Recently the CPU on my probook became faulty and then I replaced it. The new CPU was running hot (65 degrees C) even at idle usage. After applying thermal paste generously on the CPU it has come down by 10 degrees, but I'm still not satisfied as the fan keeps coming on very frequently. Also I can't remember if the northbridge and southbridge chips had any thermal paste or thermal pads, and I couldn't see it in your video too. But according to the 6555b user manual, "Thermal pads are used on the Northbridge chip and the heat sink section that services it." and "Thermal pads are used on the Southbridge chip and the heat sink section that services it." Any advice on if the Northbridge/Southbridge chips need any thermal paste or pads? And if there are any special techniques to fit the heat sink in a better way to reduce the CPU from heating up so much? Thanks in advance.

@memehimself5962

Жыл бұрын

Feel bad that cpu still hot

Muito bom Muy bieno Very good

My parents have A triple core phenom 2 6555b and the motherboard has just died (5 blink num/caps error) has anyone seen and AMD boards for sale ?

@regazzz

8 жыл бұрын

+9freelandk on eBay - plenty.

@9freelandk

8 жыл бұрын

Hi regazzz, I cannot seem to find the system board I need, just intel boards on eBay ? If you see any let me know.regazzz

@9freelandk

8 жыл бұрын

+regazzz I've finally come across the one 613397-001 for my model "HP ProBook 6555b (WD768ET). " thanks regazzz it's gotta come from China as expected but at least I can hopefully repair it now.

@9freelandk

8 жыл бұрын

+regazzz @ 14:11 Don't know how you removed the speaker bar connection so easily. I was doing this last night and it just would not disconnect and annoyingly the red wire has broken off the connector. I've managed to solder the wire back on but I'm not 100% sure it's good. I could order another speaker bar with connector but have you got any tips on getting the other one off mine just will not unclip from the sound board.

@jedi8189

8 жыл бұрын

did a new board fix your issue? we have one of these and have the same issue with the system board, tried the usual remove battery, bios battery, hold down power for 30 secs, remove hdd ram etc...

Thanks

@regazzz

9 жыл бұрын

Ricardo López You are welcome!

i need help i cant remove a keyboard

@novadix3653

3 ай бұрын

oh the ram is no diferent place :D iam ok

Just look on Google or on ebay for Dc-jack for your laptop. That should work.

I have to say after just completing this, having to remove this much stuff, including the monitor and antennas to access or replace something like a CPU cooler...is ridiculous. This is why I buy ThinkPads.

Yes, you can see how I open it in the video

You didn't dismount CMOS battery and CPU.

I don't know what bios pass you can have, you may search on Google for some solutions... Sorry

Hi, sorry, I don't know anything about that. ... if it is just plugged in, you may find it and unplug it.

It’s a pain in the ass, to teardown this notebook.

I think it will be better if you will "google it" on your own. If removing battery didn't helped, I can't really help, sorry about that.

Watch the whole video first!! He obviously hasn't taken one apart before so to avoid breaking anything watch first, also never use a screwdriver to prize up parts use a plastic prying tool

Where is the gpu

I think maybe hp needed to add a couple more screws... maybe another panel or something. This is why i cant recommend this laptop... its just not stupid enough

at 11:04 U removed 2 wires (marked 1 & 2 ) trying to reassemble and can't follow a path to re hook up ANYBODY please H E L P !! thanks