I started watching your videos last year December cos I broke my laptop and wanted to fix it by myself. I fixed it with guidlines from your video. In April this year, started a business inspired by videos I'd watched from Sorine. Today I have ammased not much wealth, but priceless experience. And Ive kept increasing it. Shalom from Nigeria.

@kylekeeper4111

Жыл бұрын

I remember you bro i think we are friends in FB

Anyone else see that naughty smile when replacing the 'fuse' 😂🤣

@meherhjb7170

4 жыл бұрын

:D

@jeezzcook1645

3 жыл бұрын

x)

@pengtjoa

3 жыл бұрын

Sure... replacing the fuse with the most cheapest fuse :)

@silvergent9061

3 жыл бұрын

@@pengtjoa he use what fuse?

@sjococo

3 жыл бұрын

@@silvergent9061 a calibrated fuse of a wire with a known small thickness

Thank you again! Another good lesson from you!The way to explain the things is PERFECT!Greetings from Greece!

U are boss sorin, u make repairs simple with lots of info.. the world needs more people like u. Greetings from Jamaica

your patience is out of this world. omgoodness

I'am a beginner on electronics and I must thank you because with your tutorial, most of the time high level ones, I am learning a lot anyway. Would be nice, if possible, in your explanation to go a bit down level for the biginners, as myself. Thanks a lot.

Thank you , Your explanation of things is fantastic and easy to understand, i knew very little about electronics and had basic tools . Your video saved me a screen replacement on my laptop. Thank you once again 👍

Not professional Tech. Pro tech will replace the screen : ) we love you sir

@sergelavallee913

4 жыл бұрын

Opposite, a real pro would do exactly what Sorin did. Repare the screen. People only think of money today and what about recuperation, pollution?

@computersrepaircotesaint-l7407

4 жыл бұрын

@@sergelavallee913 don't tell me that you believe what I wrote. Replacing screen is for dummy that work in big repair shop, not real tech. Computer tech is not electronic tech

@mytester6208

4 жыл бұрын

Not professional tech, pro/genius would replace the motherboard and the screen and add a bit of ram too while at it, and charge more than the laptop itself :)

@mytester6208

4 жыл бұрын

dont think i m joking :) because brand new dell laptop i purchased had backlight issue (i m it support tech/ not a repair tech but can tell backlight gone as you can see pic still with backlit dead) over a phone call and a few test nothing came up obviously, and dell wanted to replace the screen, plus mobo :) brand new machine!

@computersrepaircotesaint-l7407

4 жыл бұрын

@@mytester6208 yeh man, most of pc tech in here only replacing parts like lego, But guess what? ".THEY ARE QUALIFIED TECHNICIANS". ask them what's a diode they'll have heart attack

You are the master of trade Sorin. And your proper calibrated fuses are astonishing

Today is the 24th exactly a month ago on the 20th, you destroyed the screen, so you claimed that it was not worth repairing, and today is a different story, it all comes down to the success or failure of the repair, that's the theory you're talking about, not that everything is timely, and the value of the job, I really appreciate you,your job is not doggy but your story about it is.Everything can be fix is just a matter of how much one wants to give effort to do it. BE HAPPY WE ALL LOVE YOU if you can fix it FIX IT FIX IT FIX IT

Sorin, you said "Try to do it" Thats been your way all along & its made you what you are today, "A Proper Good Guy "

"You know you can fix it-fix it, you know" ;D Greetings from Poland !

Dang so logical... easy peasy just as you please... Well done as always Sorin... thanks for teaching me.. carry on, be safe and enjoy your self!!!

All your laptop screen repairs are the best this one is excellent thank you

another info from a great Sorin..thank you sir..keep inspiring..enjoy your holiday break..

Perfectly done job you’re hero of short caps.

Thanks. Always love watching your videos. Very informative.😊😎

a proper calibrated fuse, original one... so fun to watch. thanks for sharing.

nice video professor.thenks.

When I buy a screen it tells me do not touch. And you touch it like a madman and it works again. wonderful thank you 🙏 I tryout for some time

Enjoy your holidays Sorin!

Great video, thanks. Greetings from Chile!!

I love watching your videos. I sure hope that I learn more from you.. 😊

Te mando un caluroso abrazo desde mi mexico querido...

of course you can make videos from home, one week is too long without your courses :) Greetings from Macedonia

You make things very easy.......thanks

Congrats for that mastery repair. Not everybody mess with that little board.

Thank you and enjoy your time off

Hello sir im from the phillippines sir,im long time followers bec.of you i own small electronic repair shop here sir.thank you very very much sir.

nice repair sorin. have a good half term..

In primul rand vreau sa va felicit pentru aceste minunate “lectii”...acum 2 zile am dat intamplator peste unul din videourile dvstra si credeti-ma ca pana astazi am vizionat foarte multe dintre cele postate de dvstra si abia astept proiectul cu panourile solare.😍 Intamplator cautam ceva pe internet legat de o problema pe care o am la un laptop Asus k72f in legatura cu luminozitatea monitorului care este complet stinsa. Urmarind instructiunile dvstra am reusit sa gasesc sursa de tensiune de pe monitor, apoi PWM, BL_EN si chiar VLED. Ideea este ca pe PWM am 3.3v, pe VLED am 19v, dar BL_EN este scurt la (masa), iar ca in filmuletul de mai sus am siguranta de la 19v arsa. Urmarind indeaproape procedura dvstra am pus si eu o sursa de tensiune de 13v pe siguranta avariata si singura piesa care se incalzea era chiar MOSFET-ul...si nu unul din condensatoare...care crede-ti dvstra ca ar fi problema calculatorului acesta? P.S. eu locuiesc exact ca si dvstra in afara Romaniei (Danemarca) iar aici (din cauza faptului ca nu au dat niciodata de greu-banuiesc) ei nu repara in asemenea maniere produsele, ci spun direct problema este display-ul comanda unul nou, il schimba si gata...nu am intalnit inca pana acum un electronist asa cum Romania a avut, are si sper ca va mai avea...ca dvstra... O data chiar am intrebat la locul de munca unde lucram de ce nu incearca cineva sa repare mai aprofundat produsul respectiv? Si mi sa spus ca: 1. nu gasesti pe cineva bine educat sa stie sa faca asa ceva, 2. Chiar daca ar incerca cineva nu garanteaza ca il va repara, 3. manopera pe ora este foarte scumpa si nu stie daca il va repara intr-o ora, 2 sau 3, si in al 4-lea rand a zis ca totalul costului de reparatie va ajunge la mult mai mult decat ar costa o piesa noua. In ultimul rand doresc sa mentionez ca vreau sa repar acest laptop doar pentru faptul ca dvstra ma invatati sa fac un diagnostic al unui circuit si sa inteleg de fapt cum si de ce functioneaza...e ca un fel de practica a cursului dvstra. Va stimez si va multumesc pentru tot...jos palaria.

Keep the great work.. love you sir

this is not abut money if u Can Fixed Just Fixed .... respect

5:48 "You should always remove the battery when you remove the screen connector." Yep! I found that out the hard way when I fried an expensive laptop. Sparks followed up by smoke and that electrical burn smell.

@MrBrokenGuy1

2 жыл бұрын

rip

You're the best tech person I have ever seen just want to ask if bad screen showing white can be repaired

A tip for applying 'AmTech' flux, on a budget... Cut a hotglue stick to about the length of the AmTech tube. Heat it up at the end. Stick it in the back of the AmTech flux tube, in the middle. The idea is to glue it to the piston only. Not to the sides. So don't push too hard and don't heat it up like you would do for a hinge repair. Let it cool and you have a nice plunger, so you can operate it as a syringe, with one hand and without having to poke it with a screwdriver.

Im totally agree with replacing the fuse 🤗

love you sir. love you work.

as big as ever! happy holiday

Nice repair

Nice repair :) Suspect most places don't have the skill (or inclination) to do component level repair like this - easier for them to replace at modular level. Shame, as a society these skills are being lost to supposedly new products which are somehow better and people think they are getting better value somehow :/

them some ppl waist time to change the parts with the exact replacement. when i see SORIN i always smile and think how easy can life be. Remove and use a wire and let go

Thank you sir!

You are the best dude :D

Discurs fain, om fain, logica in depanare, gaseste defectul, explica precum la scoala, iar la final pune sarma in loc de siguranta. :))

@agutek

4 жыл бұрын

Ca un mecanic de Dacie :)) sarma si ciocan

@BartAnderson_writer

4 жыл бұрын

I thought this was some sort of Latin, but Google Translate tells me it is Romanion. I was just talking to a friend who married a Romanian women, is learning the language, loves the country. If I had more years in my life, I would want to learn Romanian. All best wishes from California USA.

@Omul1984

4 жыл бұрын

@@BartAnderson_writer I really appreciate Sorin. I wrote in Romanian as usual. The translation would be: "Good speech, good man, has logic in troubleshooting, finds fault, explains like a teacher, but in the end uses wire instead of fuse." I found it funny, in the context where in Romania we have a national problem with this type of problem solving.

Thank you

Happy Holiday

Hello sir, From PH

" stick in a proper calibrated fuse... original one" lol. Repairing electronics never gets boring..

@gorak9000

4 жыл бұрын

And make sure it's torqued to factory spec.... "eeeeeeeeh 'click'"

LOL, Sorin the 100Amp fuse manufactorer :-)

Hi First i love all your videos and i love to repair things thanks your help i started fixing Smartphones and Laptops with good results!!! Thanks for this but like always the people want more so maybe u can make a future video about this kind of problem i will tell u !!! I have now an Acer Aspire Nitro V17 Black Edition with mainboard problems! It doesn't start and dont charge the Battery! I checked the 19v rail and the 5 v rail and also the 3.3v rail all are ok but the only one the BIOS Chip doesnet get 3.3V on pin 8 as it should by checking this i found out this rail goes to a capacitor which goes to Ground, it's not shorted and bevore the capacitor there is also a connection to the TPS65982 Chip but this Chip is just for the USB C Type jack and for PD i dont think that this chip should provide the 3.3V for the BIOS Chip and i found nothing other where this line goes to it ends at the chip i dont see whats under it!! But the next thing is can the missing 3.3V on the BIOS Chip Cause also the not Charging Battery problem??? I tried to measure the Battery with the Multimeter but i dont get any readings so maybe its dead but it should work with only PSU and it didnt and also the BIOS Battery is empty i buy a new tomorrow! But this is also not the solution!!!

what type of fuse did u use to solder ?

I am desperately in need of help. I believe I have the same 1366x768 panel with Green colour not working but on a different (from the one in the video) HP notebook. Also I have another donor laptop which has a known to work panel of the same panel size. Even though I thought of replacing the panel myself, the connector on the motherboard is different in these two. Because as I saw on the donor laptop, the wifi antenna is also integrated with the cable that comes to the motherboard from the lid. I still have not checked the connector on the display with the bad panel, but just in case, would I be lucky if these two have similar connectors? Is it safe to plug and power on the notebook if the connector on the display fits?

Thank you very much. I have a Toshiba satellite laptop. The lower half of the screen is blank and the upper half is good. I can see the full screen on external monitor when I connect my laptop to external monitor. All the comments on the internet advised to replace the screen. Is this something reparable or I have to replace it? using VGA cable. Thanks again for the good videos

Wish all this trash hours in school could be replaced with such golden hours.

@juliusvalentinas

4 жыл бұрын

And all doctors to be shot on site for their mistakes

@em0_tion

3 жыл бұрын

@@juliusvalentinas Every human makes mistakes after all. I won't miss bank owners though. :D

Hello Sorin! Come to Besiktas before go on Holiday!!! Matchday today...

@LMCMaio

4 жыл бұрын

Braga :)

@kadmaster

4 жыл бұрын

@@LMCMaio Yeah Bro :)

Nice FUSE!!! original one )) I use that original too ... :D

i did i fixed it like like you do!!!

Hi, I’ve 3/4 white screen on my Toshiba Satellite M55. Any idea what’s the problem. Invertor PCB problem?

Hi, can I also do this for a 0603 smd..?

i love your videos Mr. Sorin.Thank you sir. i have a challenge with Samsung sense @t is dead. i traced the power rail for 19v, there is 19v untill the first mosfet but no 19v on the output of the second mosfet, i then removed the second mosfet but cannot find the same type of mosfet and so i connected the legs directly using calibrated wire but am getting a short. i tried using petrol to see what is getting hot but i see the calibrated wire area shaking when i introduce 19v and the 19v does not pass the second mosfet. what could be the problem?

Hi, I got a AOS motherboard that died/does not boot up, is it possible to estimate a cost for a basic check what could be wrong? This motherboard is from a kickstarter project and was made by Gigabyte and could run mac os out of the box after replacing the bios code. Some people say it is the bios chip itself that needs to be replaced. It died on me while running and after I got the backup bios loaded I could start it up again but after a week or so it died again.

you are amazing !!!!!!!

Electronics repair school what chemical solution you used to determined which is shorted?thanks in advance

Hi there, did you use ( aidetek box all) its useful in your job. If you like try it.

I repaired an xbox one s the other day and i left a cap off but i knew it would be fine.. In the Words of Sorin... Its not dodgy :P

Hope you are well... Can you do a pink screen repair video or advise how to repair?

"You know you can fix it. Fix it, you know" -Sorin 2k19

Mizoram ațangin ka lo lang tih ka sawi ve hrim hrim e. 😁

Sometimes unplugging the part and plugging it back in if you don't have a blown fuse or short can sometimes get it working. Switching RAM around when it reads you're shy a stick will sometimes recognize the stick again.

@TechProFury

8 ай бұрын

Does not relate here. Ram bad charge will cause a no post. That is when unplugging ram releases the bad charge. But this was posting, but lcd did not work.

Damn man you're awesome

i like these videos ! saved the whole screen be removing one cap !!!.................now i just need a video on how to fix single horizontal line ??? :)

@jamich1

4 жыл бұрын

replace the cap :)

@gile849

4 жыл бұрын

Make pressure somehow on flex in that area. maby is not repairable, who knows

@kimspeller5379

4 жыл бұрын

@@gile849 yes ive seen videos about this ? think the flex cables are heat glued the the display and this fails ? wonder if theres a way to apply pressure and heat to "re-gule" them ??

@gile849

4 жыл бұрын

@@kimspeller5379 No, physically make somhow pressure od that flex. Ruber etc. Heating is not good idea, beleve me. Very complicate to fix, but nothing lose to try. Sory my bad eng :)

ser... your the best haha... thanks .. a lot

Sorin can show me how to fix LCD Line problem

sir i have samsung np3005x laptop and the screen has black spots on it can it repaired

ok tell me this answer asus k55n laptop turns on works shows boot screen but afer half min.lcd and hard drive turns off i check memery and lcd wire thay seem ok

Hi I have a question have you ever repaired an LCD with a coil getting hot ?

Sorry i want to know where I could find books of screen repair and mainmother repair. Thanks.

Can I have your shop, I've got a laptop to be fixed, basically it had no backlight, but had 3.3v on screen but somehow that value gone, now it doesn't have picture neither backlight

Learning experience

Salut Sorin esti nr 1 ma bucur ca faci treaba asta si apreciez munca ta , o intrebare, am un hp pavilion g6 2009 sq si vreau sa ii fac o carcasa din pexiglass o problema ar fi : buton de power ca sa il schimb pot renunta la placuta cu buton si sa ii leg contact direct pe fisa ca are 4 fire ... 2 tre sa fie din ele dar nu stiu cum le identific . multumesc mult si toata stima

I have a satalite laptop that sometimes goes white screen if you push the bottom left of the screen with your thumb the image comes back' whats going on here ?

You open a new world for me. Not with the fuses. I have ben doeing that all the time. It is so nice folow the way you search for the problems.

I ave a Asus vivobook with backlight but know picture what could be the issue?

Fabulous

nice !

Hi Sorin. I need help on connecting my Eakins microscope to the pc using the same software as you open broadcast. The pc does not accept hdmi in so how have you made connection ?

@FathinLuqmanTantowi

4 жыл бұрын

idk about sorin but any sane human will use capture card in that situation

I believe The weakest link in the chain any way you chose it. love your Channel thank you

There is backlight again and some new scratches on the display as well...

@rumunn95

4 жыл бұрын

Yeah i think the same:)

Hi. How can I contact you? I have a imac a1225 power supply with a blown onboard fuse. Is it something you can still do?

Hello Sir My laptop is flickering and there is an unnecessary image appear as background on the other side. I believe your expertise to solve the issue. What is the possible problem of it. I already do the basic troubleshoot like updating the system driver, adapter and reinstalling it but still the issue remain.

yes

Fantastic job ; only one question sorry : Waths liquid are used ?

@gile849

4 жыл бұрын

zippo fuel

Follow the “plus” 😂👍

👍

Hello Master

With a Thermal cam ist this easy to find!

I really like all your videos but I kind of get a little concerned about leaving components off. You know that if the manufacturer could have done without it they would have left it off to save cost. I would like for you to do a demonstration of the fusing wires you use to replace actual fuses. set up several strands of the wire you use for different size fuse replacement and demonstrate them carrying the proper current AND opening at the proper current. You may already have done this as I have not watched ALL your videos. I have watched a great many of them though. I appreciate all you show us! THANK YOU!

I didn’t remove battery when unplug screen connector. It go wrong now power on and off suddenly it’s damage which component ? Anyone have a suggestion?or video that he fix it

2. Teil On the Battery i can read that it should be charged with 13V and 2.5A but i did not find a 13V PSU on the Board maybe the problem is here and its shorted or something i will follow that trace tomorrow maybe it will result in a working Laptop or maybe one of your next videos will help me out thanks for all and go on this way please!!!!!!!!!!!!! To see these small 3v lines without a microscope is verry verry difficult so i think i have better chances to fix this when my microscope arrived!!