Awesome video on a bow that came out when my V3X 29 did. Both are great bows.

@travisglassman

3 ай бұрын

Right on!

Awesome video Travis! Thanks.

@travisglassman

6 ай бұрын

Glad you liked it!

Another great video!

@travisglassman

6 ай бұрын

🙏

Great video, got to work on your draw cycle though so you don't trash your shoulder. 👍🏼

@travisglassman

6 ай бұрын

Thanks for the tip

Morning Travis. Very rewarding review. Are you considering using the picatiny from Accel. I'm using it just wondering if you are not going in that direction for any particular reason. Thanks Peter.👍

@travisglassman

2 жыл бұрын

I haven’t tried it yet but I’m certainly open to it. Just haven’t gotten my hands on one yet. Thanks for the question.

Great video. Seem your bow set-up easily. I read on forums that people are unable to tune their bows. Have you seen any of this with your RX-7?

@justinadams159

2 жыл бұрын

If you cant tune an rx-7 and can afford one you should pay a professional to tune it. I bought the bone collector edition rx-7 and it tuned perfectly

@travisglassman

2 жыл бұрын

I can’t see any reason these 2022 Hoyt’s aren’t tunable. This has been the simplest bow I’ve ever tuned. Everything came together very quickly.

@justinadams159

2 жыл бұрын

@@travisglassman i 100% agree. possibly the most advanced bow ever made, without any quirks. It isn’t like buying a Ferrari. I just don’t understand the consumers that spend all the money on the top of the line equipment and then try to save cost by working on a bow that they have no knowledge or business tampering with. I would argue that if you cannot operate on this bow then you can’t operate on anything, and should consult an archery shop

Great vid! What kind of target were you shooting into?

@travisglassman

2 жыл бұрын

Thanks! That’s a dynafoam based target from archerytargets.com

@cedricpoage6873

2 жыл бұрын

I came here to ask the same question. Great video

Great video Travis! I am struggling setting up my Ultra. What is your cam bushing setup?

@travisglassman

Жыл бұрын

I'm running mine as it came from the factory and haven't had a lick of trouble. I was able to set my rest where I wanted it (Roughly 7/8" from riser) and fine tuned the bare shaft tune with my rest. It's a shooter! I can take a photo of my cam bushings if you need that.

@kylemacdonell1450

Жыл бұрын

I have read some of them need VERY stiff arrows. Has that been your experience ? Did you get it sorted ?

@travisglassman

Жыл бұрын

@@kylemacdonell1450 I’m shooting Victory VAP TKO 300 spine arrows. I am a 31 inch draw length so they are almost full length arrows and I have never had any trouble getting mine to tune. I would not consider my arrows very stiff, considering my drawl length. Again, I have had very little trouble getting mine to tune right out of the box.

@kylemacdonell1450

Жыл бұрын

@@travisglassman Hey Travis.. about arrow tuning.. there can be MANY factors ? Eg - im assuming you are shooting 70lbs ? , what about point weight ? With my hunting set-up I run 250 grains upfront including insert , collar & broadhead by iron will. Could you possibly post up what the top cam looks like for bushings / spacing from limb ?? Thanks for keeping this going !

@kylemacdonell1450

Жыл бұрын

Hey Nick, did you ever get this sorted ? please give us an update

Hey Travis - I noticed that you have camo limbs on the bow. Is that a special order? if so, what was the wait time like? I asked Hoyt on Twitter, but no response... I am wanting buckskin with black limbs myself :)

@travisglassman

2 жыл бұрын

That was a special order. I was lucky to get my hands one one before most. Each dealer may have different wait times. I’d recommend getting an order in to your dealer ASAP.

I wish I would’ve waited I would’ve ended up getting this bow instead of the V3X 33

@travisglassman

6 ай бұрын

👍🏻

Hey great review and bow. I am curious though, what is your draw length VS bow set-up. Your nose seems a long way from the string. ??

@travisglassman

2 жыл бұрын

31” draw length. I have a lower anchor point so my nose doesn’t normally contact my string. Thanks for the comment

@Macmathews1

2 жыл бұрын

@@travisglassman kisser button on corner of mouth?

@travisglassman

2 жыл бұрын

@@Macmathews1 I don’t run a kisser. I have my anchor point plus peep and do very well with that. Thanks.

@Macmathews1

2 жыл бұрын

@@travisglassman Sorry for all the questions, I'm trying to figure out if I can shoot that bow with a 31.5 DL , i feel it necessary to have string to nose contact.

What length of back bar stab are you using ? I don't think you touched on that. Are you planning on adding a longer front stab ?

@travisglassman

2 жыл бұрын

6” Fuse carbon torch for back stab. I won’t be adding a longer front stab. Everything balances very well as is.

Do you feel that the stock strings are worth keeping on the bow?

@travisglassman

2 жыл бұрын

Yes. I’ve never once had any complaints with the Hoyt strings.

charging so much for a Made in China bow is crazy

@TheAmericanKid94

Жыл бұрын

You know whats even crazier? If it was made in America, it would be 3 times as expensive! HOW CRAZY IS THAT!!!!!! Go back to hunting your pizzas dweeb.

@travisglassman

Жыл бұрын

Thanks for the comment.