Matt, as I’m still learning how to carve I’m checking out every channel I can find and without question, you are the best teacher/carver out there on KZread, THNAK YOU!

@CorneliusCreations

4 жыл бұрын

I appreciate the kind words my friend! I’m just teaching as I go!

Thanks from Australia! Just started power carving a little late in my woodworking career and that stippling effect will finish up a cheese platter I just started working on!

Your videos are very good and extremely helpful as well as easy to learn from. keep on bringing them on Cornelius! Your awesome!

Thank you! I can't wait, this is my new hobby!

i really jacked up my checking. this was a great save

KISS principle at its finest. Thanks!

I'm learning a lot. really enjoying the videos. Thank you for taking time out to share your knowledge.

@CorneliusCreations

6 жыл бұрын

Glad you are getting a lot from it!

⚒️ TOOLS & SUPPLIES I USE FROM AMAZON ⚒️ ⚡︎ FOREDOM CARVER (MY FAVORITE) amzn.to/2HRXbzC ⚡︎ Wood Carving Templates: bit.ly/372Xh33 ⚡︎ DREMEL 4000 CARVER: amzn.to/2Ubc4TS ⚡︎ CHEAPER CARVER: amzn.to/2HPa1i5 ⚡︎ CARVING HAND TOOLS: amzn.to/2HSLusu ⚡︎ BASSWOOD BLOCKS: amzn.to/2WCYXYr ⚡︎ ROTARY BURS: amzn.to/2Va2Q79 ⚡︎ BEST WOODBURNER: amzn.to/2FJYE7p ⚡︎ GOOD WOODBURNER: amzn.to/2FMLZ3t ⚡︎ CARVING KNIFE SET: amzn.to/2I4z53F ⚡︎ WOODCARVING APRON: amzn.to/2UoUX0k ⚡︎ DUST COLLECTOR: amzn.to/2UnR5MV ⚡︎ CHEAPER DUST COLLECTOR: amzn.to/2I3jYHW ⚡︎ SCROLL SAW: amzn.to/2TKjtok ⚡︎ MINI GRINDER: amzn.to/2OHxYIM ⚡︎ ROUTER: amzn.to/2WCYAgv ⚡︎ CARVING LIGHTS I USE: amzn.to/2HTb9AY ⚡︎ CHEAPER LIGHTS: amzn.to/2UbtqQO ⚡︎ SANDPAPER: amzn.to/2WHKjPA ⚡︎ FILES: amzn.to/2UboAD6 ⚡︎ DUST MASK: amzn.to/2UbupAu ⚡︎ FAVORITE STAIN: amzn.to/2HRKvIQ ⚡︎ MY LEATHER WORKING KIT: amzn.to/2WGWtsh ⚡︎ CARBON PAPER: amzn.to/2HQV670

Thanks for sharing your knowledge. It really helps newbies like me gain confidence when my small simple things start coming to life because somebody made the effort and took the time to reach out and teach.

@CorneliusCreations

6 жыл бұрын

So glad it helped!

Thanks a lot for the demo, Matt! I learned that smooth stippling transition today.

@CorneliusCreations

4 жыл бұрын

Great to hear!

Very grateful to have come across your videos ,I'm an artist and recently disabled from work picked up on both wood and stone work as I am Rune reader and to stubborn cause I try to self teach glad I was able to obtain some knowledge from you and ease my frustrations thank you

@CorneliusCreations

5 жыл бұрын

Glad to hear the videos are helping you my friend!

New sub. Armed myself with a Dremel engraver, my old dremel rotary, big box of bits and making one hell of a mess👍 I have an interest in sign writing, pinstriping etc. Really enjoy your videos and even managed to pull off a few ok items. Have a huge axe that I’m going to tackle.

Matt, I really enjoy your videos. They are excellent

@CorneliusCreations

3 жыл бұрын

Thank you John! I appreciate you watching them!

Another great video, thank you. Very informative and clear instructions. 👍

@CorneliusCreations

3 жыл бұрын

Glad you enjoyed it my friend!

Like always GREAT WORK!!!!

@CorneliusCreations

6 жыл бұрын

Thank you Jorge! I always enjoy reading your comments! Hope you are doing well my friend!

Greetings from South Australia. Just started power carving recently. Finding your channel very informative and educational. Keep up the good work.

@CorneliusCreations

4 жыл бұрын

Right on! Glad you are finding them helpful!

that is an inspiring video. well done. look forward to the finished hawk.

@CorneliusCreations

6 жыл бұрын

Thank you Alfred!

I just got my foredom sr motor and 6 handpieces along with foot and table controller. I got my saeshin strong 202 micromotor with foot pedal. My nsk presto handpiece arrived this week and got my filter regulator stand and foot control setup for it this weekend. My razertip sk woodburner with 3 handpieces to start out and neon transformer lichtenberg and mot lichtenberg machines for my woodburning tasks. And about 300 different bits burrs stone etc for all the carvers. So my carving and engraving setup should be pretty complete. Will add to my knife making and opening up many other possibilities. Thank you for your inspiration. You are very talented and i appreciate you sharing your knowledge. It is a great help. Keep the videos coming please. Oh and thanks for making me spend so much money in the past month. Lol

@CorneliusCreations

6 жыл бұрын

Wow you went all out! Would love to see your work!

I'm glad to see this I have a bunch of caved sticks I came add this look to tjanks

Oh, OK! Thanks So Much!! This is really Great to know!!!

@CorneliusCreations

5 жыл бұрын

Glad you enjoyed it!

Awesome!

Awesome work. I have learnt a lot from you through your channel. Thanks for explaining it so well.

@CorneliusCreations

6 жыл бұрын

Glad you are enjoying the channel simon!

Great video. Cant wait to try it. Thank you.

@CorneliusCreations

6 жыл бұрын

Glad you enjoyed it!

Thank you for althrarythums this video popped up. I wondered how to do stipple properly and I did not know what it was called. I had stated doing stipple on a walking stick project.

@CorneliusCreations

Жыл бұрын

glad the video helped you!

Thank you. I appreciate your work!

@CorneliusCreations

6 жыл бұрын

Glad it is helping!

I just began working with wood and your videos helped me a lot :D Thanks, your axes are great.

@CorneliusCreations

6 жыл бұрын

Thank you bud! Glad they are helping!

Great idea for covering up those hard to sand areas. Thanks

@CorneliusCreations

3 жыл бұрын

Glad you enjoyed the video!

Great, great, great, love it😊👍.

@CorneliusCreations

5 жыл бұрын

Thank you Alice!

Very interesting.... I may try this on a sign her soon.

Your videos have been very helpful!

@CorneliusCreations

4 жыл бұрын

Glad you like them!

Your videos are making me want to give carving a try. I only have a dermal but I have carving bits. Now to put on my thinking cap and give it a try.

@CorneliusCreations

6 жыл бұрын

You will get it in no time!

Thanks for the information on the fading of stippling.

@CorneliusCreations

3 жыл бұрын

Glad you enjoyed it!

Excellent video. Learnt lots and hope to try this on my next carving.

@CorneliusCreations

5 жыл бұрын

Right on man glad you are enjoying the videos!

I like that thank you so much that helps a lot

@CorneliusCreations

6 жыл бұрын

Glad it helped you!

Done, done, done love it.

@CorneliusCreations

4 жыл бұрын

Thank you!

Very cool. 😊🥰

@CorneliusCreations

4 жыл бұрын

Thank you!

My first visit and I subscribed. Thanks for the info.

@CorneliusCreations

6 жыл бұрын

Thank you man!

Man you do some amazing work

@CorneliusCreations

6 жыл бұрын

Thank you Jeff!

You done good lol, thanks for that video answered all my questions , be well..

@CorneliusCreations

6 жыл бұрын

Thank you Richard! Glad it helped!

Thanks for sharing your knowledge. I just bought a couple cs tomahawks and can't wait to start working on them.

@CorneliusCreations

6 жыл бұрын

Right on!

Good job brother!

@CorneliusCreations

6 жыл бұрын

Thank you Hampton!

Luv it

@CorneliusCreations

6 жыл бұрын

Thank you!

Nice job!

@CorneliusCreations

5 жыл бұрын

Thank you Linda!

Great work

@CorneliusCreations

6 жыл бұрын

Thank you Spencer!

This guy is a true artisan. Nice fella too.

@CorneliusCreations

6 жыл бұрын

Thanks bud!

Nicely done

@CorneliusCreations

6 жыл бұрын

Thank you Jim!

Great info! I have not purchased a dremel yet, but want to pimp some hawk handles soon.

@CorneliusCreations

Жыл бұрын

Right on!

Very cool

@CorneliusCreations

6 жыл бұрын

Glad you enjoyed it!

Of all the videos I've been watching on carving you are the most informative and enjoyable to watch and learn from. Thank you! Where can I purchase more carving bits

@CorneliusCreations

6 жыл бұрын

Thank you, I put a link above for you

My first visit and I subscribed. Thanks for the info. I'll be back.

@CorneliusCreations

6 жыл бұрын

Glad to hear that! Thank you!

Great video, your voice reminds me of Jeb on Green Acares

@CorneliusCreations

3 жыл бұрын

Haha, thank you!

Would you use the same approach on a flat piece or would you use the same but size throughout? Thanks for sharing.

I think I might try wooden walking sticks. I can source those pretty cheap. Practise on those.

@CorneliusCreations

6 жыл бұрын

That would be great I think!

Cornelius always good dude

@CorneliusCreations

6 жыл бұрын

Thanks man!

Great work sir! Beautiful..Jesus smiling on your creation!🙄..i learned thxz blessings.

@CorneliusCreations

6 жыл бұрын

Thank you Matthew!

@matthewpicklesimer293

6 жыл бұрын

Cornelius Creations Weaponry your welcome

You are good

@CorneliusCreations

6 жыл бұрын

That might be debatable lol, but thanks man!

Is the foredom SRH motor the same as the SR motor? I'm wanting to get a 25h handpiece but I didn't know if you could use a square shaft on a SR motor

Did you burn the stippling or do anything other than stain it to get that darker look to it? Also, have you ever done two tone staining? I want to stain all but the lettering on a project, but I'm worried about it bleeding over. Yes, I'm a noob at this whole playing with my wood thing. I find it extremely relaxing.

The burr kit listed in the description does not have the size bits you show in the video. Can you provide information on the small/med/large ball burrs please?

IT is amasing, but how Do you make the steel?

I'm probably overlooking it, but what size are the burrs that your using on that stippling; also do you always use the same 3 when you stipple? I''ve tried some stippling after watching your video and I think i may have used a too small of burr and wen too deep.

First of all, I understood you just fine, but I'm a southerner as well. Love your videos and have learned a few things to add to my designs. Would be nice if you had someone who could "zoom in" on some of what you were showing. You did a great job working with what you had. Burr sizes, and maybe a buying source would be nice, but then that's what Google is for. What's your favorite way to transfer your image to the wood?

@CorneliusCreations

6 жыл бұрын

Thank you! I appreciate it! Yes, I need to get some more lenses. I’m shooting in 4K so a lot of it is already zoomed in when I post edit. But I will try to pay more attention to this on my next video and try to make it closer for sure. I appreciate the feedback! I should have a rotary burr ebook coming out soon. I also have a few links below to some burrs :)

I am hoping you will go over different bits or burs or whatever they are called

@CorneliusCreations

6 жыл бұрын

I am actually creating a free guide to it here pretty soon you can download!

@wilmamansfield7294

6 жыл бұрын

.Is this available yet?

Love the easy to follow instructions. Are you using a 400 XS?

@CorneliusCreations

5 жыл бұрын

Nope the Foredom SR series, glad you liked it :)

@jordanhenderson3741

5 жыл бұрын

Right on! I’m relieved to hear your using a fordedom and getting professional results, the 400 XS is a $700 (at its simplest package) system that I was hesitant to buy. Thanks for answering me!

Hello, I just recently got interested in wood carvings. I haven’t done one yet but I’ve watched your videos over and over and I think I’m ready to start. When I click on the Burrs you have in the description they are not the round burrs - will you pls say what “size” burrs you are using? I know you used 3 round ones - is there only 3 sizes? BTW - I have subscribed with the bell. Your videos are “THE BEST”.

@CorneliusCreations

5 жыл бұрын

You mean I got the bell??? Hahaha thank you VanNessa! I appreciate the kind words! Yes, those burrs are different shaped. I need to update my links. There are many size burrs. I recommend some cheap round carbide burrs from dremel. There obviously some better ones from other companies but the dremel ones are very accessible. If you haven’t yet be sure to subscribe to my website at www.corneliuscreations.com for upcoming power carving blogs!

how do you get the stipeling dark

Which burs are you using? The amazon set listed does seem to have the ones you used in the video

@CorneliusCreations

4 жыл бұрын

These were bought on eBay. I use multiple burrs but the ones I have listed are recommended

i defenitely have to start some wood work.. that is amazing!!! One question: how did you get the wood of the axe that dark? which oil did you use? (1:19)

@CorneliusCreations

6 жыл бұрын

Thanks man! That was Jacobean stain

@Sapere-Aude-Metal

6 жыл бұрын

Great, thank you! May you be that kind and give me a link. I searched on amazon, but didnt found anything which is called Jacobean stain

@Sapere-Aude-Metal

6 жыл бұрын

oh, now i saw that you already posted the link 2 months ago. It is Minwax Stain➡ amzn.to/2GOISY2 isnt it?

lol i watched some of this earlier .......ive stippled and didnt even know it lol lol

@CorneliusCreations

5 жыл бұрын

Right on haha

You made me start with power carve :) yesterday i bought my first dremel :) Thank you so much! I tested my dremel with spruce wood and i think it is way to soft. Especially carving smaller things and symbols is very demanding with spruce i think. I tried to carve some words (i planned to carve arround them to let them stand out) but i totally failed with those holes of the letters ( e.g. the two holes of an "B") Maybe i drew the outstanding lines to thin (2mm,/ ~0,078 inch), so they broke. What kind of wood do you suggest for powercarving??

@CorneliusCreations

6 жыл бұрын

A lot of wood will work besides Pine. You are right, sometimes softer woods are harder to put smaller details into. Since it was really your first time you need time to get used to it. I would start with something bigger first then start getting into the smaller detailed stuff. Once you start "Grasping" the technique you will start to understand border width and how much to take off. People use basswood for carving usually. So glad to hear you are getting into woodcarving!

@Sapere-Aude-Metal

6 жыл бұрын

Thank you for the information :) At the moment i try powercarving on an other kind of wood which i found in my garage. I don't know what it is actually but i guess it is pinewood due to its red colour. It is a little bit harder than spruce wood and it works very well for now :D I just need to get the right feeling with the different milling cutter bits but your videos helped me a lot! Especially your video about the fingerpose of the pinky helped very :) And you were definitely right when you said it is better to carve only in one direction, not back and forwards. Thats what i'm working on now :) up.picr.de/32511364ru.jpg

What the machine best sir foredom or dremel? Tnx and god bless u..

@CorneliusCreations

4 жыл бұрын

Depends on budget and what you are using it for.

What burrs do you use ? is there a good make to get ?

@CorneliusCreations

5 жыл бұрын

I use all kinds, My favorites are dura-grit and foredom. I have some links to some cheaper brands above also that works great :)

Hey bro what type of wood is used in for tomahawks? Thanks in advance.

@jessejames9113

4 жыл бұрын

Mendell Jackson Hickory is the most common wood for axe/tomahawk handles. Ash is also a good alternative.

We'll forgive the grammar in exchange for the excellence in wood carving. Thanks!

@CorneliusCreations

4 жыл бұрын

Lol #SouthernStrong 😁😁🔥

So I commented previously that I was carving a 30-30 stock. Well it’s done. I want to show you but how do I post pictures?

@CorneliusCreations

4 жыл бұрын

I seen it and it looks awesome!

How do u stay steady

@CorneliusCreations

6 жыл бұрын

practice

I am going to start and try to wood carve with my Dremel but would like to know the number of the bits i see you use in your demos. i see the sizes on monitor but seem different live. Can you show what number bits you use for stippling and carving?

@CorneliusCreations

6 жыл бұрын

I hardly use the dremel bits but I will try to get a Rotary burr guide out soon. I remember being overwhelmed when I first started and I’ll give you a piece of advice. Use what works. Mostly everything will work, but some better than others. Through doing this you will learn what is the best burrs for your projects.

It looks like termites got to it.

I cant get the stippling thing! What am I doing wrong??

@CorneliusCreations

4 жыл бұрын

Just keep practicing you will get it!

Music to loud . otherwise good video .

@CorneliusCreations

5 жыл бұрын

Hey there! Thank you for the feedback bro! I have recently got some better speakers so my mix should be a bit better now.

Nice video. It would have been a whole lot better if you hadn't had that silly musical track in the background competing with your voice.

@CorneliusCreations

4 жыл бұрын

Hey there, thank you for the feedback, this video is quite old now and I have changed them up a lot :)

Whoa! Music level WAY too loud

@CorneliusCreations

6 жыл бұрын

I thought I had it low, I will watch this next time, thank you for the feedback.

Your work is really awesome but the music is far too loud. I don't understand why you even need music while you're talking... If you're just carving, fine but it's not needed at all while talking. If you feel like you must have it make it BARELY perceptible. It would give you a much more professional effect.

@CorneliusCreations

4 жыл бұрын

Thank you for your feedback Roger! Since this video I’ve got better editing speakers and have made my music quite a bit softer in the background.

@rogerhartline8762

4 жыл бұрын

@@CorneliusCreations great job! I didn't mean to be too critical, but your skills are amazing and I hope to learn a LOT from you!!!!

Are you a preacher or a youth pastor?

@CorneliusCreations

3 жыл бұрын

What would ever make you guess that?? 😉

Awesome!

@CorneliusCreations

6 жыл бұрын

Thank you Bro!