Great video. BUT, coin collectors beware. Do NOT polish coins that "might" be valuable. You will destroy them and also the price. It's very easy to see if a coins' been polished. Collectors don't want polished coins. It just completely ruins the value. If you look at the copper piece he polished closely, you can see all the scratches on it. Even if you can't see them with the naked eye, if you use a low powered microscope or jewelers loupe, you'll be able to see scratches everywhere. HOWEVER, if you want to polish coins that aren't worth more than face value, go ahead. Some people like highly polished coins and they do look "cool."
@JamesBond-py8xsКүн бұрын
Very cool, but I'm already into rock collecting as a hobby and don't need another non-profitable hobby. Engraving tumblers or other stuff to sell would be awesome, though I can't see anyone buying a $50 wallet just because it's laser printed, especially when I wouldn't pay that much money for a wallet of any kind myself
@TaxedtoXXX2 күн бұрын
Thanks for sharing
@KarloPedrin2 күн бұрын
Hello, could you help me? I have the Xtool S1 40W, and when engraving a tumbler, it stretches the image towards the sides and I struggle a lot to center it. When I align it, the laser moves to another place or the RA2 rotates the tumbler.
@CorneliusCreations2 күн бұрын
Hey there! Do you have Facebook? I promise the S1 facebook group will answer that question almost immediately. It sounds like the proper settings isn't inputted.
@tedbundy80873 күн бұрын
Good more video the grave with fresa carburo tugsteno Thanks You
@deeppatkar61323 күн бұрын
Hye... Will you able to show... Make craft on Leaf 🌿.. ?? With the F1 ultra???
@Benjamin_Skoda3 күн бұрын
I just want to say that xtool creative space has the settings that you did
@CorneliusCreations3 күн бұрын
So for part of this video I was using an older beta software. Since then, they have updated to support with one click settings 😁
@Thinbluediggers4 күн бұрын
I'm have the D1 pro and looking to get this for my shows to be able to do things on the spot at shows and to also be able to do batch items with the Conveyor. Great video can't wait to save up and get one
@CorneliusCreations4 күн бұрын
You will absolutely love it man. I have been using mine since I got it!!! I think it’s a well rounded investment and tool for people who are going to put it to use.
@gregoryamer4 күн бұрын
I’m wondering about using the conveyor to cut and engrave longer objects.
@CorneliusCreations4 күн бұрын
You won’t be able to cut on the conveyor, but it will most definitely engrave!
@darrenfisherman38384 күн бұрын
I just got one still in the box I’m so looking forward to using it.
@CorneliusCreations4 күн бұрын
It is a very capable machine!
@astonmcleod53444 күн бұрын
is there software, that can take a photo into a laser design?????
@cindywhite97544 күн бұрын
Another question… Do you have to hook up your PC constantly to the F1 ultra or can you go Bluetooth or over some cloud server?
@cindywhite97544 күн бұрын
Can you add a link to the adapter that you used for the minimalist metal wallet?
@nathanwolf55475 күн бұрын
I’ve already ordered mine to go with the F1 I already own
@EtchinAaronslaserworkshop5 күн бұрын
Would love to test one of these out
@PamsieLala5 күн бұрын
Hi Matt. Sorry i've been away for so long. Moving countries and get started from 0 hasn't been easy. Finally soon will start using my laser engraving machine, but i got a question for you, it only comes with one pair of protective glasses, and i would like to get another as we and my partner will be working with it, the people at the store where we bought it, Crreality distributoirs here in Colombia, told us to buy any that has UV protection which can be cheap, what do you think of this and what do you recommend?? Once again much appreciate the advice and help. Take care!! Thank you!!!
@zekecorder82265 күн бұрын
Watching from Kuna, Idaho, good info, good job.
@albertdrew72355 күн бұрын
very kool, can you do 4.5" x 4.5" white tile engravings?
@breedib5 күн бұрын
Kinda expensive...
@davidlashaway5 күн бұрын
Awesome video Matt!! All that work paid off. Keep them coming Bro.
@CorneliusCreations5 күн бұрын
Thank you bro! I appreciate you!
@PinStrype245 күн бұрын
Would you be willing to share a link for the ridge style wallets?
@dragonf10925 күн бұрын
I want to do this with my poetry but I don't know anything about wood engraving or engravers.
@ShyneflowLC6 күн бұрын
Great video my friend. Appreciate the insights. You work hard 🙌
@CorneliusCreations5 күн бұрын
I appreciate that! Thank you for your friendship and support my dude!
@ShyneflowLC5 күн бұрын
@@CorneliusCreations always!!
@Kevin-oz9fw6 күн бұрын
Can you cut acrylic and if so, how thick?
@FC-kw4mw6 күн бұрын
Thank you for such a fluid and concise video!
@FC-kw4mw6 күн бұрын
Also! I like to use a heavy bodied black tempera on the metals to engrave, it makes it black and more visible, can use higher speed, and the resource is cheap and accessible. Clean up is quick too!
@CorneliusCreations6 күн бұрын
Thank you for the kind words!
@CorneliusCreations6 күн бұрын
Great tip!
@marcobrinkman61726 күн бұрын
4000+ euro, thats even way too much for just a side hustle. Wish you would do more woodcarving videos, those laser machines are not affortable for beginners 😀 thumbs up for the old woodcarving videos 👍
@dcmotive6 күн бұрын
One thing not talked too much about this unit, is the open concept cover. The lack of an interlock closure system makes this classified as a Class 4 laser, which if you are in a business that OSHA is regulating, it is a real headache to use the machine "safely". Pretty much have to have it in a locked room with no windows operating by itself, blinking entry lights, a bit of stuff if you look it up. OSHA Technical Manual (OTM) Section III: Chapter 6 lines a lot of it out.
@nathanwolf55475 күн бұрын
You can set both the F1 and the ultra to shut off if you lift the cover. Not useful when using accessories though.
@mikeyneeley6 күн бұрын
Where do you get the coaster at 11:10?
@CorneliusCreations6 күн бұрын
I got these from a local craft store called hobby lobby for $5
@digitaldoom35936 күн бұрын
The best F1 Ultra Video on KZread thanks for this. Can't get my ultra fast enough the wait is driving me crazy lol.....
@CorneliusCreations6 күн бұрын
Thank you for the kind words my friend! Trust me, you will LOVE IT!
@danaringgenberg95086 күн бұрын
How long did the tumbler take to engrave?
@CorneliusCreations6 күн бұрын
I think around 4 minutes. I could have definitely improved the look by playing around with the settings.
@Schoendings6 күн бұрын
Thank you for the video. I miss the 3D surface engrave. From xtool day said it goes up to 45 degrees. Would be nice to See IT on a Tumblr or a wineglass.
@CorneliusCreations6 күн бұрын
Great suggestion!
@Schoendings6 күн бұрын
My idea was to created jig where I can place the wine glass and just engrave a name on the site without using the rotary. Put in a glass, push the button, Put in next glass , Push the button and so on. Because it will save much time if I do not need a 360 degree engraving.
@amishsteve6 күн бұрын
Haven't purchased ANY laser yet. Complete noob. Looking to use for a side hustle.
@CorneliusCreations6 күн бұрын
Lasers are becoming crazy popular. Many people have quit their jobs because of starting “side hustles” with lasers 🤯
@bochica35626 күн бұрын
Love your video. Very informative and helpful. Best wishes!
@CorneliusCreations6 күн бұрын
Thank you!
@wanderingcalamity3606 күн бұрын
That's awesome!
@CorneliusCreations6 күн бұрын
Thank you!
@CorneliusCreations6 күн бұрын
👉 Order the F1 ULTRA here: bit.ly/F1UltraUSA US Store : bit.ly/F1UltraUSA EU Store: bit.ly/F1UltraEU UK Store: bit.ly/UltraF1UK CA Store: bit.ly/UltraF1CA DE Store: bit.ly/F1UltraDE FR STore: bit.ly/F1UltraFR 🔥 xTool Exclusive discount code for $80 off: CC10
@johnmitchelljr7 күн бұрын
I guess you can’t polish wood. Thank you.
@zeroease8 күн бұрын
xtool is so expensive that I had to find a cheaper alternative. And I hardly ever carve metal, I work with plywood, and I ended up choosing the Acmer P1 S, I don't think there's a better option for less than $200
@thelonecabbage78348 күн бұрын
The last line is honestly kind of terrifying. What you've said is, essentially, that the average person buys what FEELS good, rather than what IS good. Explains a lot about the current state of the economy.
@bradwolf18 күн бұрын
The know.. in how to do. (Well) - Eugene Kwok
@bradwolf18 күн бұрын
Where is your dremel tool made?
@lonerangeri568 күн бұрын
I rarely take the time to comment on a video. You did a great job on this one…with some great tips Subscribed
@CorneliusCreations9 күн бұрын
Man, I need to lay of those tacos!
@Aimeevan-AstenWalkingBird10 күн бұрын
UK
@Dawns_Creative_Carousel10 күн бұрын
It looks like you burnt it! I thought the air assist was supposed to help with that? I wish you could put the material you are using in and let the software tell us the settings, instead of all the guesswork 😔
@gugun266011 күн бұрын
What paint are you using, it's so bright and beautiful
@K40Keller12 күн бұрын
I can only laugh myself silly whenever I hear about inches. Who uses something like that? MM, CM, that actually makes more sense, doesn't it?
@Congaboy5512 күн бұрын
Hello, excellent videos I'm just getting started with carving w/ Dremel. What is the best wood to use for projects?
@Mainswitch5512 күн бұрын
We learned you do love Bella... And the laser of course! 🙂 Thx for sharing this man, awesome product! ♥ KR from Austria
@clintstinkeye560713 күн бұрын
Fail. Hans skills don't need assistance.
@juanmendoza748713 күн бұрын
How is the X tool F1 laser ? Is it still going strong?
@CorneliusCreations13 күн бұрын
It sure is! Im still using it and still plan on using it!
Пікірлер
Great video. BUT, coin collectors beware. Do NOT polish coins that "might" be valuable. You will destroy them and also the price. It's very easy to see if a coins' been polished. Collectors don't want polished coins. It just completely ruins the value. If you look at the copper piece he polished closely, you can see all the scratches on it. Even if you can't see them with the naked eye, if you use a low powered microscope or jewelers loupe, you'll be able to see scratches everywhere. HOWEVER, if you want to polish coins that aren't worth more than face value, go ahead. Some people like highly polished coins and they do look "cool."
Very cool, but I'm already into rock collecting as a hobby and don't need another non-profitable hobby. Engraving tumblers or other stuff to sell would be awesome, though I can't see anyone buying a $50 wallet just because it's laser printed, especially when I wouldn't pay that much money for a wallet of any kind myself
Thanks for sharing
Hello, could you help me? I have the Xtool S1 40W, and when engraving a tumbler, it stretches the image towards the sides and I struggle a lot to center it. When I align it, the laser moves to another place or the RA2 rotates the tumbler.
Hey there! Do you have Facebook? I promise the S1 facebook group will answer that question almost immediately. It sounds like the proper settings isn't inputted.
Good more video the grave with fresa carburo tugsteno Thanks You
Hye... Will you able to show... Make craft on Leaf 🌿.. ?? With the F1 ultra???
I just want to say that xtool creative space has the settings that you did
So for part of this video I was using an older beta software. Since then, they have updated to support with one click settings 😁
I'm have the D1 pro and looking to get this for my shows to be able to do things on the spot at shows and to also be able to do batch items with the Conveyor. Great video can't wait to save up and get one
You will absolutely love it man. I have been using mine since I got it!!! I think it’s a well rounded investment and tool for people who are going to put it to use.
I’m wondering about using the conveyor to cut and engrave longer objects.
You won’t be able to cut on the conveyor, but it will most definitely engrave!
I just got one still in the box I’m so looking forward to using it.
It is a very capable machine!
is there software, that can take a photo into a laser design?????
Another question… Do you have to hook up your PC constantly to the F1 ultra or can you go Bluetooth or over some cloud server?
Can you add a link to the adapter that you used for the minimalist metal wallet?
I’ve already ordered mine to go with the F1 I already own
Would love to test one of these out
Hi Matt. Sorry i've been away for so long. Moving countries and get started from 0 hasn't been easy. Finally soon will start using my laser engraving machine, but i got a question for you, it only comes with one pair of protective glasses, and i would like to get another as we and my partner will be working with it, the people at the store where we bought it, Crreality distributoirs here in Colombia, told us to buy any that has UV protection which can be cheap, what do you think of this and what do you recommend?? Once again much appreciate the advice and help. Take care!! Thank you!!!
Watching from Kuna, Idaho, good info, good job.
very kool, can you do 4.5" x 4.5" white tile engravings?
Kinda expensive...
Awesome video Matt!! All that work paid off. Keep them coming Bro.
Thank you bro! I appreciate you!
Would you be willing to share a link for the ridge style wallets?
I want to do this with my poetry but I don't know anything about wood engraving or engravers.
Great video my friend. Appreciate the insights. You work hard 🙌
I appreciate that! Thank you for your friendship and support my dude!
@@CorneliusCreations always!!
Can you cut acrylic and if so, how thick?
Thank you for such a fluid and concise video!
Also! I like to use a heavy bodied black tempera on the metals to engrave, it makes it black and more visible, can use higher speed, and the resource is cheap and accessible. Clean up is quick too!
Thank you for the kind words!
Great tip!
4000+ euro, thats even way too much for just a side hustle. Wish you would do more woodcarving videos, those laser machines are not affortable for beginners 😀 thumbs up for the old woodcarving videos 👍
One thing not talked too much about this unit, is the open concept cover. The lack of an interlock closure system makes this classified as a Class 4 laser, which if you are in a business that OSHA is regulating, it is a real headache to use the machine "safely". Pretty much have to have it in a locked room with no windows operating by itself, blinking entry lights, a bit of stuff if you look it up. OSHA Technical Manual (OTM) Section III: Chapter 6 lines a lot of it out.
You can set both the F1 and the ultra to shut off if you lift the cover. Not useful when using accessories though.
Where do you get the coaster at 11:10?
I got these from a local craft store called hobby lobby for $5
The best F1 Ultra Video on KZread thanks for this. Can't get my ultra fast enough the wait is driving me crazy lol.....
Thank you for the kind words my friend! Trust me, you will LOVE IT!
How long did the tumbler take to engrave?
I think around 4 minutes. I could have definitely improved the look by playing around with the settings.
Thank you for the video. I miss the 3D surface engrave. From xtool day said it goes up to 45 degrees. Would be nice to See IT on a Tumblr or a wineglass.
Great suggestion!
My idea was to created jig where I can place the wine glass and just engrave a name on the site without using the rotary. Put in a glass, push the button, Put in next glass , Push the button and so on. Because it will save much time if I do not need a 360 degree engraving.
Haven't purchased ANY laser yet. Complete noob. Looking to use for a side hustle.
Lasers are becoming crazy popular. Many people have quit their jobs because of starting “side hustles” with lasers 🤯
Love your video. Very informative and helpful. Best wishes!
Thank you!
That's awesome!
Thank you!
👉 Order the F1 ULTRA here: bit.ly/F1UltraUSA US Store : bit.ly/F1UltraUSA EU Store: bit.ly/F1UltraEU UK Store: bit.ly/UltraF1UK CA Store: bit.ly/UltraF1CA DE Store: bit.ly/F1UltraDE FR STore: bit.ly/F1UltraFR 🔥 xTool Exclusive discount code for $80 off: CC10
I guess you can’t polish wood. Thank you.
xtool is so expensive that I had to find a cheaper alternative. And I hardly ever carve metal, I work with plywood, and I ended up choosing the Acmer P1 S, I don't think there's a better option for less than $200
The last line is honestly kind of terrifying. What you've said is, essentially, that the average person buys what FEELS good, rather than what IS good. Explains a lot about the current state of the economy.
The know.. in how to do. (Well) - Eugene Kwok
Where is your dremel tool made?
I rarely take the time to comment on a video. You did a great job on this one…with some great tips Subscribed
Man, I need to lay of those tacos!
UK
It looks like you burnt it! I thought the air assist was supposed to help with that? I wish you could put the material you are using in and let the software tell us the settings, instead of all the guesswork 😔
What paint are you using, it's so bright and beautiful
I can only laugh myself silly whenever I hear about inches. Who uses something like that? MM, CM, that actually makes more sense, doesn't it?
Hello, excellent videos I'm just getting started with carving w/ Dremel. What is the best wood to use for projects?
We learned you do love Bella... And the laser of course! 🙂 Thx for sharing this man, awesome product! ♥ KR from Austria
Fail. Hans skills don't need assistance.
How is the X tool F1 laser ? Is it still going strong?
It sure is! Im still using it and still plan on using it!