How to wire Remote Start to any Small Engine w/ Electric Start
Ойын-сауық
Here is the remote chips that I have purchased:
www.amazon.com/dp/B07DC2N41N?...
If you have any other questions:
1. Drop your question in the Comment Section
---------------------------OR----------------------------------------
2. E-mail me at:
Пікірлер: 46
You should be using the relay to drive the solenoid not the starter. Same setup but connect the output of your relay to the solenoid control wire. That way your current is not going through the relay.
@outdoormaniac4562
Жыл бұрын
Yeah, that's how it's set up now.
@MrTurnermason
Жыл бұрын
@@outdoormaniac4562 Nice, Good job!
Cool, good work, start and also stop. Now we need the choke function. Maybe that can piggy back on the start switch.
Normally opened normally closed?
The way you connected it makes the relay switches burn out, I know because it made it start a couple times and then it fired it! I think it needs to be connected to the solenoid.
@outdoormaniac4562
11 ай бұрын
I connected it to the solenoid, and I had the same problem as you do. I connected it the wrong way. What I mean by that is that I had the majority of the current going through the remote relay. So, I changed up how I connected the whole system together. Instead of having that current running through the remote relay, I added a 40 amp automotive style relay. So the remote relay would trigger the external automotive relay, which carried the current needed by the starter. I need to take this video down and make a new one, because the way that I did it in the video worked but only for a couple times. Let me know if that makes sense. Thanks.
@AdamPoitras-kk6dr
11 ай бұрын
So I’m not sure about adding a 40amp automotive relay, not sure why you would add it. So the way I’m doing it is almost the same way you had it hooked up. Instead of hooking up the common to the part of the solenoid you originally did in the video I connected the back part of the solenoid with a female and make quick disconnect, I’m hooking the red power line up to the incoming power side of the solenoid and the ground to a bolt on the engine. For the shut off switch I’m hooking up the other channel of my 2 channel relay the same way you hooked up the kill switch by connecting ground to the engine and the common between the yellow low oil pressure switch.
@outdoormaniac4562
11 ай бұрын
@AdamPoitras-kk6dr so you're hooking it up to the "trigger" wire?
Nice vid mate
@outdoormaniac4562
2 жыл бұрын
Thanks you!
great video. the remote control switch i have has only two terminals for both input and output. do I still have to double the input negative?
NO = Normal Open NC = Normal Close
@outdoormaniac4562
Жыл бұрын
Thanks.
how do you hook up to pull choke to start engine. I have to pull choke on my Predator 9000w generator for it to start. Thanks for the Vid. Great job.
@thomasmanion2903
Жыл бұрын
Use thermostatic choke or door actuator can work
@ElphasDube-wi5xd
4 ай бұрын
How do you connect choke actuator?
where is the kill switch video
@outdoormaniac4562
Жыл бұрын
I have one coming out in the next few weeks. I appreciate the patience.
I have a xantrex AGS for my solar inverter/charger. It is supposed to detect when the batteries are low and start the generator to help charge them if it is cloudy or night time. The issue I have is my generator is a WEN dual fuel 4750W electric start. So it is not set up for remote starting and I there is nothing but a key start switch. In order to connect the AGS to the generator will I need to create or buy an interface between the 2 like you have there?
@outdoormaniac4562
Жыл бұрын
Sorry for the late response. I'm sure you have your issue figured out, but this is something that I am not to familiar with, so its would be very hard for me to help you.
load capacity? you can just use a powerful relay that can handle starter current
Hey @outdoormaniac4562 any way to start Firman WH03242 to remote start ? , it has choke ..
What must the relay be like to turn on via flysky fs-i6x remote,how to connect it, can you help me?
@outdoormaniac4562
Жыл бұрын
I'm not sure. Sorry about that.
Have you done the stop wiring video yet?
@outdoormaniac4562
10 ай бұрын
Yes.
I have a Flysky RC Remote. I want to flip a switch to start a mower.
@outdoormaniac4562
Жыл бұрын
I have no idea how to help you with that endeavor.
Do I need a little battery like in the video or can i use a 12 volt car battery? I bought same transmitter as you but when I press the button to start, the starter keeps cranking and the transmitter smokes and get feted. Some help would be much appreciated.
@outdoormaniac4562
Жыл бұрын
Sorry for the late response. You can use a car battery, but a car battery has the capability of pushing more amps through the circuit than the smaller battery I use in the video. Their was a flaw in how I wired it. Instead of using the relay on the circuit board to power the starter motor, I should have used the relay on the circuit board to power an external relay capable of the amperage required to start the engine. Their are two modes on that transmitter. One is on and off which is the mode you are on, and a momentary mode which is the mode I used in the video. Momentary mode works by pushing the button to activate the starter and then releasing the button to deactivate the starter. On and off mode works by clicking the button to turn it on and then clicking it again to turn it off. So putting the transmitter in momentary mode and adding a secondary external relay like mentioned above, would most likely solve your problems. Again, sorry for the late response. Please let me know if you need me to explain this further or you just find it confusing. I appreciate your patience!
@trevorsteiner3996
Жыл бұрын
I will try it again in the next couple days and I will let you know. Thank you!
@sohailmalik5268
3 ай бұрын
Any idea about the amperage of external relay you mentioned above
How do you wire it to remote stop?
@outdoormaniac4562
Жыл бұрын
I'm planning to make a video on that in the coming weeks. Hang in their.
would love to see the kill switch video
@outdoormaniac4562
Жыл бұрын
I don't think so.
@robertpatton2140
Жыл бұрын
@@outdoormaniac4562 Why wont you show the kill switch being wired?
@outdoormaniac4562
Жыл бұрын
@@robertpatton2140 kzread.info/dash/bejne/lGaVlciYoJe9k5s.html
"NO"=Normally Open. "NC"=Normally Closed. Nice vid!
@outdoormaniac4562
2 жыл бұрын
Thanks for the clarification, much appreciated!
NC normally closed NO normally open
@outdoormaniac4562
Ай бұрын
thanks you.
Normally open normally closed
@outdoormaniac4562
Жыл бұрын
Thanks
*Fryed*