Thanks alot! This also worked for my Sony stereo that I put into my 2008 Mazda MX-5. I rewired an old 3.5 mm audio jack to those contacts and it worked. Also I didn't have pins for the plug, but improvised with striped wire that I put some solder on for stability, pushed through and fixed with hot glue. I mean, if it's stupid and works, it's not stupid :D

@Fincabaracoa

5 жыл бұрын

Hello, Frozen! so if I have the 3.5 jack with two wires only, do I need to buy any module? I'm thinking to connect the ground from the 28 pin connector to ground of the car. I already have located the 3 wires from SWC

@frozenwoodfrog

5 жыл бұрын

Hi, yes, that should work without any box, if you can freely program the SWC in your radio. In many cases the signal is just different resistance values. Best to find the wiring diagram for your car and the SWC plug for your radio brand. I believe the position of signals on the 3.5 mm plug can be different. At least worth a try before you get a special box for it.

@Fincabaracoa

5 жыл бұрын

@@frozenwoodfrog thanks, I going to install a Kenwood 7705s I will try to connect the jack to aux out from HU to the 3 wires from the car connector.

I have DMX5020S Kenwood, installing into 4th gen 4Runner. I do have the blue wire/yellow stripe (steering remote) coming off the Kenwood deck. I also have the diagram that shows factory location of wires. However, if the goal here is to 'direct wire' into the factory wiring, what is the 3.5mm conversion for? I have nowhere to plug that in. Any ideas?

Anything on connecting the built in Kenwood DMX125BT oem steering wheel controls?! I have a 2014 Kia Forte LX

Any info on 2018 navara steering wheel pin locations

Where can i order 28 pin plug ?

Tried finding this 20-pin plug from your website but shop only shows Toyota Camry 2006 onwards, not 2005.

I have a 2008 hilux wich harness should I buy ? And what is you guys website ?

Is fit for Elite i20 India?

About to do exactly this on a 2013 FJ Cruiser, any idea of the connector I should expect car side? Love the vids BTW thanks!

@AutoChimpElectronics

6 жыл бұрын

FJ is a 20 pin plug I believe from memory. We have them if you need email team@carboncarsystems.com.au

@AUCongnitiveRealist

6 жыл бұрын

Looks like the older Hilux's have the 20 pin plug as well. E-mail sent :O)

How can I buy one of your adapters

Hello guys! I have jdm Toyota and Kenwood multimedia. I find this 20 pin connector with these three wires. Connect with jack and plug in the my mulimedia. And remote function doesn’t work. But, the multimedia has 1 interesting wire - remote cont (steering wheel remote input, light blue with yellow stripe). Do you know what is it? With which wire I must connect him? Thanks.

@georgebond02

Жыл бұрын

Did you figure it out? My head unit has nothing

Hey mate, love the video. I have a JVC KWM740BT which comes with the 3.5mm jack to 3 loose wires for steering wheel control. Do you have details on what wires these go to in the cars harness for a 2006 Yaris? The JVC unit also has a blue wire with yellow trace with a tag on it for steering wheel control. Is this just discarded as I’ll be using the 3.5mm jack instead?

@sonny5741

5 жыл бұрын

Hey mate I have the same unit, how did you go, does it have the control unit inbuilt or did you have to buy a controller for it.

@sonny5741

5 жыл бұрын

If anybody comes across this from Google - JVC KW-M740BT does have in built steering wheel remote control decoder that you connect with the small aux style cable (included in the box) JVC / Kenwood have a reference sheet with what pins to use and if steering wheel control options is greyed out in settings you need to connect the park brake sensor wire and have it on (or bypass it by connecting park brake wire to ground). ref. au.jvc.com/car/av_receivers/pdf/Direct_OEM_Steering_Remote.pdf

@DarienJoseph

5 жыл бұрын

@@sonny5741 THANK YOU! I just got my RAV4 steering wheel control working!

@LuxExemplify

5 жыл бұрын

@@sonny5741 you're a fucking legend, I was going insane trying to figure out why the option was greyed out, many thanks

@bigmurray5653

4 жыл бұрын

@@sonny5741 @Sonny Spakianos Thnaks for the info

I just did the same thing for my 2007 hilux surf but the unit doesn’t recognize that I have the steering controls plugged in...

@AutoChimpElectronics

4 жыл бұрын

Check they are plugged in correct and pin corrected as it does work.

www.kenwood.com/au/car/visual_navigation/oem/ Here is the link, so you don't have to type it from the video

@fennymercado5734

3 жыл бұрын

Sir not working in honda crv 2010 model.why?

@inanitas

3 жыл бұрын

@@fennymercado5734 How am I supposed to know? Did you wire up the cables properly?

what is the website??

Si does it work directly, or should I buy an module for the steering wheel?...

@triplesix4792

11 ай бұрын

Depends on you the audio receiver

@user-xz4jn7zx3y

11 ай бұрын

@@triplesix4792 Kenwood ddx4021bt

Clean Install, if you want to see other great 12 volt videos please check us out.

Thanks for the info, making me cringe tho everytime you tap the glass on your monitor with a metal screwdriver.... Staahhhppp!! lol

Sir wap sait name