This is much easier to understand than the website which is so confusing. The website seems to suggest only 2 items but you need 3 items.

Thank you, you have explained what neither myself or an auto electrician could work out re order of connection order.

Hi guys, Managed to get my pioneer head unit to work with my Harman kardon system on the WRX 2015 but my steering controls are not working correctly. It only triggers the next button as volume up and if I choose non adapter. I can only program 2 buttons. Is the module damaged? Or did I choose the wrong steering control harness? The one I have is the CHSU7C. Need your help please

What would I need to instead a kenwood DPX M3300BT in a 2005 Toyota Camry Altise Limited if I want to keep the steering wheel controls? And will I need to do direct wiring?

Thanks for your video, I'm trying to reuse the existing handle bar radio controls on a BMW R1100. There are 5 wires connected to 4x micro switches. (1 to each button (4) and a common earth (1) (Vol-up, Vol-dn, Sel-up & Sel-dn.)) No wiring harness, just direct cabling (Individual cables). Any advise as to which product I require, cable connection diagram, resistor values if I need to connect them inline would be really appreciated. Thanks in advance, Peter

@aerpro

Жыл бұрын

Hi Peter, unfortunately we do not currently have any interfaces to suit your BMW motorcycle. For assistance in custom wiring a solution it would be best to speak with your local car audio specialist for advice as they will be able to test and assess the existing wiring.

Thank you for the video, i have just purchased CHMZ12C. Both the pre-out wiring harness on my new headunit and the CHMZ12C harness have a brake wire. Do i have to ground both brake wires or only one? If only one which one? (If it makes any difference i am not connecting an external amplifier) Thanks

@aerpro

2 жыл бұрын

Hi, the handbrake wire from the CHMZ12C harness and the main harness of your stereo will need to be connected together to function correctly.

I just purchased a new aftermarket head unit Sony (xav-ax3000) for my 2011 Mazda CX7 together with the harnesses CHMZ7C and APP9SP5. I followed the installation process as said in the video. Everything is functioning well (CarPlay, tuner, usb , rear camera, settings, steering wheel control) only there is no sound coming from all the speakers. Repeated the whole process still no sound. I'm guessing mine is a Bose amplified. How do I know if it is Bose or non Bose amplified? Help please!!!

@aerpro

2 жыл бұрын

Hi Enrico, There is a loose blue wire with a bullet connector on the end which is part of the CHMZ7C harness. This blue wire needs to be connected to the blue wire of the stereo harness which will trigger the factory amplifier to switch on.

Thanks for the video. I have the APP9 and CHTO15C for my 2014 Camry. Can you please explain a bit how to retain the factory reverse camera? Both the primary and secondary harness have the purple(reverse) wires so do I connect them? What else do I need to do?

@aerpro

2 жыл бұрын

Hi, Yes, the purple wires will need to be connected to have your aftermarket stereo switch over and display the factory reverse camera.

@austinliuyilun

2 жыл бұрын

@@aerpro Hi, I tried to connect all the patch leads and they all fit but the head unit could not have the factory reverse camera signal. Any reason for it? The head unit can detect the reverse gear signal tho. The head unit is Sony XAV-AX5500. Thanks.

@austinliuyilun

2 жыл бұрын

@@aerpro I also placed the green (park brake) wire to a metel bolt in order to ground it while I was trying the reverse camera but the camera still did not either. I understand Camry factory camera uses 6V and the 6V output chip (L7806CV) of the CHTO15C got very very hot immediately after I turned the power on, could this be the cause ?

@aerpro

2 жыл бұрын

@@austinliuyilun it will be best to contact our technical team at tech@tdj.com.au in regards to this as they will be able to assist further.

Good evening after watching your video it has helped alot but i got a question, i'm looking at putting a Kenwood DMX8020S in to a holden barina spark 2010 i see that i need a CHGM7C and APP9KE6 to keep the wheel controils but do need to have the Primary Harnesse - ISO APP030 to make it work in the car. Thank you for the response

@aerpro

Жыл бұрын

Hi Timothy, no the APP030 primary harness will not be needed as the CHGM7C steering wheel control harness will act as the primary harness in your case.

@aerpro. Hi, I bought a full aerpro plug and play package and Alpine ILX650e system through Automotive Superstore and have also previously installed the exact same system in another car. I am installing on a Mitsubishi Lancer CJ 2010. I have undone and retried a number of times following this video. The only thing I cannot seem to get out is the power plug from the back of the headunit. However I gather because it is disconnected from the car and any power that it is the same as unplugging as per the video and waiting before reattaching the plugs in the correct order. Nothing is working on the steering wheel. Can you please help? I have spent ages on it. thanks heaps

@aerpro

Жыл бұрын

Hi, have you been incontact with Automotive Superstore as yet for tech support? Their team will be happy to assist with fault finiding or installation if needed.

If you buy them separately as you have shown on the website, you do not get the steering wheel control module with it so it becomes useless

Hi I'm fitting a subwoofer. Which male bullet connecter size should I get to fit into the trigger wires female bullet connecter? Thanks!

@aerpro

2 жыл бұрын

Hi, the Narva 56048BL would be the most suitable. www.narva.com.au/products/56048bl/5-0mm-male-bullet-terminal-blue--14-pack-

I have the APP9SP4 what do I need to connect the reverse camera wire to connect to a Sony XAV-AX3000, Car is a 2009 Toyota Aurion?

@aerpro

2 жыл бұрын

Hi, is it a factory fitted Toyota reverse camera you are looking to connect to the Sony or is it an aftermarket reverse camera?

Ca. You elaborate more on the kenwood patch lead? I have a dmx5020s thatcim trying to hook to a 120 prado but the headunit doesn't have the 3.5mm jack

@aerpro

Ай бұрын

Hi, if you have purchased a APKWPL patch lead, the single wire from that will connect to the blue wire with the yellow trace from the Kenwood stereo. Be sure to disconnect the module from power for one minute to allow it to reset once this connection is made.

avh-a24bt pioneer. I’ve got a 2008 rav4 that had a Sony installed with steering wheel control box that worked fine. I’ve just installed a pioneer avh-a24bt and I can’t seem to get the steering wheel tab on the pioneer to be selectable, it’s greyed out. How can I get this to work. I’ve followed your steps and still can’t seem to get it to work. Thank you

@aerpro

Жыл бұрын

Hi Adam, Pioneer stereos require the handbrake wire to be connected and the handbrake engaged before certain settings like the steering wheel control setting can be accessed.

@adamshepherd3901

Жыл бұрын

@@aerpro hello, thanks for the reply works fine now 👍

Hi legend, need your help I have same problem with other people. 2004 focus, Sony XAV-AX1000 steering control not working, the module is really hot, and idk if the black box is broken

@aerpro

Жыл бұрын

Hi Bruce, it is best to contact your place of purchase for a replacement if your module is faulty. They should also be able to assist with fault finding prior to organising the replacement if needed.

I have an ATOTO head unit connected to the patch lead connected to the swc harness and remote wire to the swc harness from head unit and it isnt powering on at all. I am at a loss as to what im doing wrong :( i already returned one head unit after i thought there eas something wrong. Car is a 2016 JK wrangler with alpine amp system.

@aerpro

11 ай бұрын

Hi Kurt, there may be other reasons that the unit is not powering up correctly. It would be best to get in touch with your local car audio specialist for assistance. You can also contact our customer service team on 03 8587 8888 who can run through some fault finding techniques if you like.

Got an I bought the kit for my Mazda 2 2012, and the adapter was going coo-coo occasionally (then the steering wheel controls did random operations) until it stopped working completely. So frustrating.

@jordanmccloy7586

8 ай бұрын

What harness did you have cause mine just doesn’t work at all

I purchaced a sony xav-ax1000 for my 2012 toyota hilux. Got all the relevant harnesses step 1 and 2 with patch lead and everything works great but i lost sound in my rear speakers. What could be the cause of that ?

@samnasra8703

2 жыл бұрын

Front speakers work, steering controls work, Reverse camera works, The light green park break wire should that be earthed ? Would the issue have sonething to do with the blue wire ?

@aerpro

2 жыл бұрын

Hi Sam, the only reason you may lose audio in you rear speakers is because you may have missed one of the connectors which connects to the vehicle harness. Also be sure your Hilux has rear speakers fitted as not all models came with speakers fitted in the rear doors.

@samnasra8703

2 жыл бұрын

Cheers for that. Took the door cards off no rear speakers. How random

Hey team, I got the FP9212K to connect a clarion FX450 to our outlander. According to the selector I should have everything I need in that box, but the SWC won’t work and don’t quite match the video, as there are two connectors for the final step and the swc adapter is already connected to the iso side for the unit. How do I need to adjust connect order to accomodate?

@PrideKnight80

Ай бұрын

And only connect the 3.5mm to the jack right? I don’t also need to use the key 1, key 2 and ground wires? Because I tried that too

@aerpro

Ай бұрын

Hi, you are correct, it is only the 3.5mm jack which needs to be connected to the Clarion FX450. The key 1, key 2, and ground can be insulated and left unused. There will be 3x looped wires on the patch lead (orange, green, and purple) and of those, the purple loop will need to be cut. Once cut the module will need to be reset by unplugging it from power for 1 minute and then reconnecting. Once this has been done, check to see if your steering controls are working.

@PrideKnight80

Ай бұрын

@@aerpro thanks team, that got it. Much appreciated

Were can I pay the stuff from

I did my research as explained in these vid wanting to find the full kit (fascia and harness to retain steering wheel controls) but bit confusing as harness that comes in these kit aren’t compatible with the car factory sound system. I own a Mazda 3 BL 2012 Bose system. Installing Kenwood DMX9720 XDS

@aerpro

3 жыл бұрын

Hello Juan, Unfortunately we do not currently offer a Bose compatible complete kit for the Mazda 3 BL 2012 however if we buy the parts individually we can substitute in a BOSE compatible Steering Wheel Control Interface. So for a Mazda 3 BL 2012 Bose system with a Kenwood DMX9720 XDS you will need: FP8072 (Fascia) CHMZ8C (BOSE Amplified) (Steering Wheel Control Interface) APA55 (Headunit Antenna Adapter ) APP8KE7 (Headunit ISO harness) APUNIPL2 (Patch Lead) These items will make up what you needed from the complete kit but now compatible with your BOSE system. Please let us know if you have any questions

@juanpalomino7043

3 жыл бұрын

@@aerpro I’ve ordered last week the parts below… FP8072 (fascia) CHMZ8C (Bose amplified, sw control interface) APPK9KE7 (ISO harness and includes the correct patch as stated in your website). Do I need still the APA55 (headunit antenna adapter)..?? Regards…

@aerpro

3 жыл бұрын

Hey @@juanpalomino7043 Yes you will still need the APA55 Headunit antenna adapter

@juanpalomino7043

3 жыл бұрын

@@aerpro Thanks..!!

@juanpalomino7043

2 жыл бұрын

@@aerpro All parts have arrived and I did proceed with connection as shown in these video starting from the headunit and working back to the vehicle. I ended up with only two harness from the headunit (main harness and antenna). My vehicle has 3 harness which are. Main harness, antenna harness and AUX in harness. Should I leave the AUX in harness unplugged ?? Or I missed the Aerpro APMZAUX harness. Or my HU does not need these harness. KENWOOD DMX9720 XDS Thanks in advance

Do you have distributorship in india

If you have a problem installing arfter sales service is non existent. Go somewhere else please.

Anyone done a alpine for a d40 can't get mine to work l. Followed the instructions

@aerpro

7 ай бұрын

Hi Nicholas, for further technical assistance you can contact our customer service team on 03 8587 8888 if you like.

Its plug and play but you still have to connect the parking brake wire into the original wire which in turn is still splicing wires.

@clarkykev1

2 ай бұрын

What about the pink wire and the other loose ones? I’ve lost my cruise control using this

but where are the speakers wires for Every speaker? am confused

I got a Honda stepwagon and can’t find its harness for a pioneer head unit please help!!

@aerpro

2 жыл бұрын

Hi Fili, is your Honda Stepwagon an Australian delivered vehicle? I don't believe we have a listing for it, but if you could provide us with an image of the factory stereo connector we may be able to match something up for you.

@fililemoa9079

2 жыл бұрын

@@aerpro Can you contact me on a different plaform

@aerpro

2 жыл бұрын

@@fililemoa9079 you can contact our technical sales team at tech@tdj.com.au for further support.

I have a Hyundai Santa Fe 2010 I purchased a JVC KW-M150BT aftermarket stereo head unit and also bought the Aeropro head unit install kit FP9227K, we have connected the unit up and we have no steering wheel control isn't able to be used, the head unit doesn't have the patch unit to put the lead into at the back of the unit, and there is no KZread video for my JVC & the aeropro FP9227K.

@aerpro

Жыл бұрын

Hi Phil, you will also require a patch lead (APUNIPL2) to connect the steering wheel control module to the steering wheel control input on the rear of the JVC stereo.

@thekoolestkat1

Жыл бұрын

@@aerpro that patch lead came with an FP9227K unit install kit, my son hardwired the wired to the key 1 & key 2 wiresbut it didn't activate the steering wheel control, we watched the videos of hardwiring doesn't work.

@thekoolestkat1

Жыл бұрын

I actually need a video showing how to connect the JVC KW-M150BT to the FP9227K SWC interface for the Hyundai Santa Fe 2010, all but this car installation with both items I have mentioned.

@thekoolestkat1

Жыл бұрын

@@aerpro it says I will need the LD-SWC-F3.5 but it still doesn't show me how to hardwire after connecting the patch lead plug into the LD-SWC-F3.5 then which wires does it go to.

@aerpro

Жыл бұрын

@@thekoolestkat1 it will probably be easiest to call our customer support line when you have the vehicle available to work on and our team can walk you through the details step by step. Our number is 03 8587 8888

Haven't had any luck with my Navara D40. Bought all the correct parts, followed install correctly multiple times, still dont get any steering wheel controls. I have a Pioneer head unit

@shadowbart9

3 жыл бұрын

any luck mate ?

@urabusliberty9258

3 жыл бұрын

You could have to go into settings and manually enter the controls

@lukevader6735

2 жыл бұрын

Same here, they said it would be easy lol. Way over my pay grade

@littlebelldancing

Жыл бұрын

I’m having the same problem

@davidsobin2405

Ай бұрын

Turn source off in settings and try again

How about the reverse mate ?

@aerpro

2 жыл бұрын

Hi Alex Trey, In the particular harness pictured in the video (CHIZ2C) there is no reverse trigger available behind the factory stereo. As such, the reverse wire (purple/white) from the aftermarket head unit will need to be manually connected to a reverse trigger wire.

@rediculousman

2 жыл бұрын

kzread.info/dash/bejne/noGetqqthcTPirA.html does this help?

I didn’t follow this procedure and my skip track button doesn’t work. Can I still go back and follow this procedure to try and solve the issue? Or is it too late?

@aerpro

Жыл бұрын

Hi Edde, you can still go back and follow this procedure. You will simply just need to disconnect all harnesses from the vehicle for at least 1 minute prior to following this procedure to allow it all to reset.

@ScoobyDJ.

Жыл бұрын

@@aerpro thank you I did this and also mapped the buttons on my unit and it worked. Very happy with the result.

Hi Aerpro Team, I bought a SuperCheapr Auto (Australia) a Sony XAVAX3200 with a Secondary Harnesses + Patch Lead (APP9SP5 ) + Steering wheel control harness (CHNIUNI) for my 2012 Nissan X Trail (T31 model) ). All is working except the steering wheel control! I tried the 4 settings configurations written on the page 4 of 4 of the manual, and every time I unplugged all and wait at least 2mn before starting a new configurationI. I called twice Aerpro Australia for having some advices. He gave me 3 other setting (all off and number 7 on then off/off/off/on/off/on/off + 8 off or on, then off/on/on/on/off/off/off and 8 off) but it still doesn't work!! he doesn't have other advice to give me... could you please help? Thanks in advance

@aerpro

2 жыл бұрын

Hi Benjamin, if the tech team was unable to assist over the phone it may be something else to do with either the headunit or the wiring / connections. Best advice would be to visit your local car audio specialist who will be able to diagnose it further for you in person.

@benjaminmelin9441

2 жыл бұрын

@@aerpro Thanks for your easy and poor answer. I exactly followed the manual instruction and also the video methods... On my side, I suspect a defect an Aerpro equipment so I will not recommend Aepro equipment to anyone. Due to your lack of support, can I send the bill of the car audio specialist to aerpro?

@benjaminmelin9441

2 жыл бұрын

Could you please confirm me at least the setting configuration which have to use for my Nissan Xtrail 2012 (T31 model)? The model of my previous autoradio is PP-3091T and serial number 0033382

@aerpro

2 жыл бұрын

@@benjaminmelin9441 You are correct to remove all plugs and modules in between dipswitch changes, 30 seconds wait time is ample. It is important not to have the parts plugged in as the internal chip will not recognise the changes if it's plugged in. Also, stick to the dipswitch settings in the manual only. aerpro.com/sites/default/files/manuals/chniuni_instructions_1.pdf If you are getting results from the buttons, but they incorrect, you can try swapping the blue and green bullet terminals on the main harness. This swaps the two Key wires for the controls, Nissan did alternate these wires depending on the system. If you are not receiving any results at all from the button presses, this could also indicate the presence of an auxiliary bluetooth module. In these models, they are commonly located in the rear quarter behind the plastic trim. You will be able to access this from the rear of the vehicle. In the packet for the CHNIUNI you should have the bluetooth bypass plug. Not using this will inhibit the steering wheel controls, as when the factory radio is removed, the bluetooth module will de-power and not allow the control wires to flow back to the radio, this bypass plug allows this connection to remain complete. During all this, as all aftermarket radios can differ, ensure you are utilising the radios internal options for enabling steering wheel controls. You may find yourself in a situation where the harness is setup correctly, but the radio is not listening to them.

@benjaminmelin9441

2 жыл бұрын

@@aerpro Hi, so I installed the bluetooth by pass (I wanted to do it when the steering wheel was working but ok , I did it now)... I tried again the 4 setting of the manual (I did it twice and unplugged every time all the wires and wait 2mn before a new setting), but it is still not working again and I lost 2h again! I checked also the setting of my Sony autoradio and the steering wheel is "on" or available... I connect also my old nissan autoradio, for checking the steering wheel, and it is still working... so do you have other option or tips to propose? except asking to Supercheap Auto a new Aerpro Steering wheel control harness... I suppose something is wrong with the one I got... looking forward to hear from you, thks

My steering wheel control is still greyed out… what do I do?

@aerpro

2 жыл бұрын

Hi Tara, to access the steering control menus on most headunits, the handbrake wire needs to be connected during installation and the stereo needs to be in standby for the function to be accessible in the menu.

@taralawton1353

2 жыл бұрын

@@aerpro we connected the handbrake wire, how do we put it in standby mode?

@aerpro

2 жыл бұрын

@@taralawton1353 it will depend on which stereo you have installed. It would be best to consult the user / installation manual of the stereo.

@andrewford80

Жыл бұрын

Connect that park wire to a -12v ground and it won't be a problem

Ok so I have one of these for a 2002 vy holden im putting in a Kenwood head unit what I wanted to know is what do I hook the key one wire too ? Does it connect to the remote sw from the head unit or to a acc 12volt thanks only part im stuck on

@aerpro

3 жыл бұрын

Hi, For tech support on our products please send an email to tech@tdj.com.au and we will be able to assist further.

@kanes69er

3 жыл бұрын

@@aerpro yeah I have three times now with no reply thats why I asked here

@aerpro

3 жыл бұрын

@@kanes69er please send me an email directly to marketing@tdj.com.au and I will follow it up with the sales team.

@kanes69er

3 жыл бұрын

@@aerpro i did before I even shaw this video and contacted threw your web page to all with not one reply but I'll try again maybe fourth times a charm

@PewithMrB05

3 жыл бұрын

I have tried all of the above steps and still can’t get the steering wheel control to be selected. It stays gray.

Followed exactly and still doesn’t work

@aerpro

2 жыл бұрын

Hi Ian, what make and model of stereo are you installing? Some stereos require the steering control function to be switched on in the settings of the unit.

@toofa68

2 жыл бұрын

@@aerpro it’s a pioneer DMH-Z5350BT

@aerpro

2 жыл бұрын

@@toofa68 that model of Pioneer will require the steering wheel control function to be switched on in the settings menu of the stereo. The following video may help you with the process. kzread.info/dash/bejne/f2ymsdKgo8iepqw.html

@toofa68

2 жыл бұрын

@@aerpro thanks guys. I will try this tonight

@toofa68

2 жыл бұрын

@@aerpro still not working the steering wheel control is blank/I highlighted. Followed both videos to the letter.

Where does the patch lead plugged into

@aerpro

2 ай бұрын

Hi Trevor, One end of the patch lead will connect to the steering wheel control module while the other end will depend on the make and model of the stereo you are installing.

You didnt even tell us were the patch lead goes on the headunit lol

Like n sub