How to Weld/Install New Front Clip on Toyota Pickup Truck Cab
Автокөліктер мен көлік құралдары
In the previous videos I removed the damaged rusty front support and driver inner fender by drilling out many spot welds. Then I replaced the rusty battery tray and repaired some damaged metal on the cab due to drilling out the old spot welds. Now I will show how to weld on the new inner fender and front radiator support using the existing holes from the factory spot welds as plug welds. Because this truck had some minor front end damage, getting the replacement parts to fit and line up properly took some extra effort.
Products Used (affiliate links):
Mini Belt Sander, corded: amzn.to/48HwxRM
Ryobi Mini Belt Sander, 18v cordless: amzn.to/4bUPLGp
3" Cutoff tool: amzn.to/3ThXDdH
4.5" Grinder: amzn.to/49qt4bv
Wire Brushes for Drill: amzn.to/3TgtP1d
Duplicolor Self Etch Primer: amzn.to/3wJvYcJ
Weld-Through Primer: amzn.to/49qtzSV
FLC-200: www.fortunelaser.com/fortune-...
My used OEM Toyota Parts for sale: yota.6thgeargarage.com/
I don't have Patreon or ask for donations, but you can support the channel with some rad 'Yota gear from my store: 6thgeargarage.com/merchandise/
Instagram: 6th_gear
6thGearGarage
More videos of this project:
Rusty 1980 Toyota Pickup Truck Long Bed(s) Build Intro: • My Rusty 1980 Toyota P...
1980 Toyota Long Bed Rusty Cab Floors: • 1980 Toyota Long Bed R...
More rusty floor repair (shorter version) • How to Fix a Rusty Car...
Cutting & replacing rusty rocker panel: • How to Replace/Fix Roc...
Removing the Cab: • Disassemble & Remove C...
Removing the engine: • Toyota 20R Engine Remo...
Toyota 20R Engine Teardown: • Toyota 20R Engine Tear...
Removing the Bed: • How to: Remove the Bed...
Prepare and Paint a Rusty Frame: • How to: Prepare and Pa...
Update Suspension to install Drop Spindles on 1979-83 Toyota Pickup: • How to: Update Suspens...
Installing Steering Components on Toyota Pickup 2WD/RWD: • How to Install All New...
Install Street Edge 3" Lowering Leaf Springs: • How to Install Street ...
How to install Mini C Notch: • How to Install Mini No...
Removing 20R engine: • How To Remove 20R Engi...
20R engine Refresh: • How to Replace Gaskets...
Chassis/Frame Parts & Details: • 1980 Toyota Long Bed P...
Rusty Bed Swap: • How to: Remove a VERY ...
Gut the Engine Bay: • How to: Remove EVERYTH...
Drilling Spot Welds to remove front clip: • How to: Drill Out Spot...
Replacing a Rusty Battery Tray: • How to Replace Rusty B...
Some other Toyota videos you may find helpful:
• How to: Remove 1980's ...
• How to: Toyota 4x4 Sol...
• Part 2: How to Restore...
• How to Remove Toyota T...
• How to: Clean/Restore ...
• How To: Disassemble a ...
• Toyota Solid Front Axl...
• How to Remove an Entir...
• How to Install/Upgrade...
• Install Toyota Pickup/...
• DIY: Toyota 4x4 Drive ...
• Trail Gear Hi-Steer in...
• Toyota Pickup Truck Fi...
• How to Properly Repair...
• DIY: Repairing Toyota ...
• Fixing Floor and Rocke...
• How to: Remove Headlin...
• How To Remove Toyota P...
• $100 Toyota 22RE Engin...
• How to: Compression Te...
• Remove Toyota Pickup T...
• How to: Toyota Pickup/...
• DIY: Toyota 4x4 Transf...
• How to Replace Toyota ...
• How to: Remove Toyota ...
• How to: Install Toyota...
• DIY: Repairing Toyota ...
• Breaking & Cutting Up ...
• Toyota Pickup/4Runner ...
• How to: Disassemble Ve...
Пікірлер: 29
as an amateur , id like to say that your vids are priceless ,,, thanks for the knowledge
@6thGearGarage
3 ай бұрын
Thank you... I appreciate that!
I have an 84 long bed and have had it so long I never thought of it as a classic. You have really got me excited about mine again. Mine is from and in the rust free south in Georgia. Since watching your channel I have been inspired.
@6thGearGarage
3 ай бұрын
84 long bed is definitely a classic! Being rust free is the best thing that can happen to these trucks.
I cannot thank you enough. These vids are gold. Very encouraging. Cheers from Australia!
@6thGearGarage
3 ай бұрын
Thank you!!
Dude-- I found your channel, binged them all-- so now waiting for news one is tough. I am really looking forward to seeing this truck come back to life.
@6thGearGarage
3 ай бұрын
Thanks! I hope to have it on the road before summer so I can start working on the next project, '85 4runner.
Nice job. Lots of patience getting good fitment. Might try sheet metal screws to pull the metal together in tight locations. Use clecos if you want to remove and replace. Looking forward to more of your work.
@6thGearGarage
2 ай бұрын
Good idea, thanks!
That is some complicated work, getting everything lined up on a truck that took a hit in the front. Great work.
@6thGearGarage
3 ай бұрын
Thanks 👍
Love this project, keep it coming. I know you are meticulous in your work, and that makes some of this a little frustrating. But man, really, what you are doing looks great, especially considering the old and beat up status of these two trucks. 👍
The editing is always top notch my dude 🤘
Your patience and meticulous work is priceless. Thanks for sharing this video.
@6thGearGarage
3 ай бұрын
Thank you very much!
cool project !
Awesome job
@6thGearGarage
Ай бұрын
Thanks!
AMAZINGNES!!!
What if you do a later model interior dash steering etc would look cool if it can fit but I'm sure you can make it fit
@6thGearGarage
2 ай бұрын
I really like this 1st gen interior because it is in pretty good condition. I haven't seen anyone swap a newer interior, but I'm sure it could be done with enough trimming and fabrication.
👍👍
Comment for stats.
Make sure you paint the cowl drain openings on the sides, under the fenders, just ahead of the doors...my 87 rotted out on the drivers side and leaked into the cab, area can be reached on the drivers side with the cowl vent and hood hinge box removed....have to remove fender on the passenger side....and its a Ca truck not ohio
@6thGearGarage
3 ай бұрын
Will do... thanks!!
I dont think you can rely on how the spot welds line up from 2 different vehicles....They didnt have robots way back then and pretty sure they where done by hand....other wise, a couple more days and your back on the road....LOL
@VeyronBD
3 ай бұрын
They were brand new at the time but its possible these were done by robot by then, I have a 79 celica and its big claim in the brochure was that it was welded by robots too
@6thGearGarage
3 ай бұрын
When I did the rocker panel, most of the spot welds were in the same place. The front support was a different story, but who really knows since it had been previously repaired. It's a relief to be learning on something that I can only make better haha.