Could you do an in depth demo on the Nipple threader. The Boss says it always crushes the threads on the receiver... Should be a handy tool set, but hitting some snags. We do a lot of 3/4” & and 1” pipe

@hamedfarai4484

4 жыл бұрын

كم سعر طقم الأسنان

Do you know I can find a video on how to replace the chuck jaw insert teeth.

I got a brand new 815A Ridgid die head. When I lined up the index line on the lock screw with the 1/2" mark on the Cam Plate, the threads are tight, only making one turn or less. I had to adjust the Cam Plate about 1/16" to 1/32" lower to make a perfect fit. Is this normal? I didn't seem to have the same problem in cutting 3/4" pipe.

OCAL PVC coated Rigid seems to slip in the chuck and chew up the coating... please do a video on threading OCAL/RobRoy. Hotter afternoons seem to be worse.

I am having trouble getting my 535 oil pump primed , I pulled the priming plug filled the pump with oil pushed the foot switch . I did this several times and no oil flow , am i doing somthing wrong?

Does anyone walk in the thread depth on larger RMC?? Like start above the 3" mark, middle of the 3" mark, THEN! On the line?? I was trained to walk in all my thread depths.

Hi, I'm wondering if you could help me. I recently bought a ridgid die head at auction but it came with a nut ratchet bar? attached to one of the nuts. Can you please tell me how to remove it and is nut ratchet bar the correct term for a long metal bar with like a socket on the end for removing or adjusting the nuts on the die head? I think it's a 141 hog head pipe threading die head. Any help would be much appreciated.

Are these factory or industrial grade

i can't get dies out of the head 714

Castellano xf