Want to buy a kit?: Amazon USA: amzn.to/48MuDQc Amazon Canada: amzn.to/4aI6mg9

This guy is sharp. He’s got rhythm, he is articulate and he covers all of the sticking points, potential pitfalls & details one might encounter, moving along at a very good clip. 🌟🌟🌟🌟🌟

@YouWrench

3 жыл бұрын

Really appreciate that, thank you!! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Great video mate! Clear concise instructions. Thank you!!

@YouWrench

3 жыл бұрын

Thank you for saying so, much appreciated!! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Excellent video! Great and clear explanation. Thank you for this helpful video.

@YouWrench

4 жыл бұрын

Thank you! Genuinely appreciated, and glad you found the video helpful!

Just found this video. Excellent, Thank you.

I just bought this exact kit and was wondering how to use the adapters, thank you so much !!

@YouWrench

3 жыл бұрын

Glad we could help :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

I was wondering about this kit and this answered my question. Very common cap and most others have these styles.

@YouWrench

2 жыл бұрын

Perfect! Glad we could help! www.paypal.me/youwrench

Good to know for my junkyard radiator testing. Never knew how to work that kit. I just ran it up to temp with garden hose water and watched the top right, at the seam, leak.

@YouWrench

Жыл бұрын

Glad it was helpful for you :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Thanks m8!

wonderfull kit !! thanks

@YouWrench

Жыл бұрын

Glad it was helpful for you :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

I followed the steps along, I got my pressure up to about 15psi which is what was recommended. It looks like I passed the pressure test. Looked thoroughly and found no leaks. What do you think my next step should be?

Nice green gloves.

@YouWrench

2 жыл бұрын

Thank you :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Nice job me old mucker!

@YouWrench

2 жыл бұрын

Cheers, Skipper :-) www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Question @youwrench Before carrying out the test. Is the engine supposed to be hot (reach operating temperature) or cold (like over night cold) AND after already lost some coolant in the radiator do you need to top up the coolant before testing or just test regardless of coolant level

@YouWrench

3 жыл бұрын

You can run the test with the engine cold (and not running) no problem because this is simulating adding pressure to the system for you. If the level is low, it is worth topping up before running the test, especially if you are expecting to see a leak. Hope that helps :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

does this work to test head gasket leaks too?

Does this work with Mitsubishi FTO and Evo X

Would you please advise the brand/model number for your tester, or provide a link to where you bought it. I have seen a few cooling system tester kits that have various screw-on adapters but none that had the clip-on adapter that you used. Thanks.

@YouWrench

3 жыл бұрын

Yes, no problem. Here is the link to the exact set shown in this video: amzn.to/3oq1JOz

@STiHigh1

3 жыл бұрын

@@YouWrench. Thank you for the quick reply, appreciated. I shall buy one. :)

About the 16 PSI, why do some people when using an adaptor on the coolant reservoir to pressurize and then refill the coolant system with a compressor use a far much higher PSI like 25-28 PSI?

@YouWrench

3 жыл бұрын

Ah ok, so this is different. The 16psi comes into play as this is the pressure for the factory radiator ap (as you can see printed on the top). The cap is designed to release excess pressure if/when it goes over 16psi, so the system will keep a constand pressure as it is designed to do, and if there is a build up of pressure the rad cap can release it. So that is more the 'operating pressure' side of things... When replacing the coolant using the pressurised type of tool connected to an air compressor, it needs enough pressure to 'suck' in the coolant from the bottle. Also, remember when you do it this way you are 'sucking' the empty cooling system, to remove the air (the pipes flatten out), whereas the pressure tester is 'pushing' pressure. So the process is different :-) Hope that makes at least some sense, lol!! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

Shop wanted $400 to do this in my audi is that hood price?

@YouWrench

Жыл бұрын

Wow, glad we were able to help you save $$$'s!!! Thanks for your support! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

hi brother... may i know how to choose a radiator cap for my car... my car using double layer radiator and my engine capacity is 1.5cc... thank you

@YouWrench

4 жыл бұрын

Most sets include a selection of caps that are designed to fit the majority of car makes and models. The best way is to try each cap until you find the right one. It should be quite obvious which ones will definitely not fit by looking at each first. There should be one there to fit, unless you make and model is rare or unusual. Best of luck!

@reezalal-firuz180

4 жыл бұрын

@@YouWrench thanks for the reply

@watchmanonthewallcouk6498

2 жыл бұрын

1.5cc that IS A BIG ENGINE

Hi, I bought that kit today, but it doesn't have the user manual, could you help me with that?

@YouWrench

3 жыл бұрын

We don't have a user manual available for it unfortunately, but you can follow the instructions in the video to use it successfully. Best of luck!

I would almost bet the farm you actually didnt have a leak. I believe you poured coolant to show what a leak would look like :)

@YouWrench

3 жыл бұрын

I wish that were the case!! The leak was from a corroded clip arm on the lower radiator hose. It would only start to leak after a certain amount of pressure (as seen in this video). Noted the corroded arm, went to open the clip and the arm immediately snapped off. The radiator itself was a-ok. Nasty cheap clips!

this kit can do radiator cap test...?

@YouWrench

Жыл бұрын

No, this kit is for testing the radiator, and it replaces the cap during testing so this it no good for testing radiator caps. Hope that helps! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

That isn't a leak it is a waterfall.

Raining leak🙈🙈😅😅

@YouWrench

3 жыл бұрын

Yes, for us it was a partially broken lower radiator hose clip rather than the radiator. So VERY easy to spot, but would only leak once pressure was applied, and once it started it POURED out!! Replaced the hose clip, and was perfect again :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZread channel. 3) Please Like our video's on KZread (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!