How To Tune Your Sabvoton Controller (MQCON App)
Тәжірибелік нұсқаулар және стиль
In this video, I show you how to tune your controller settings to get the very best out of your new/existing sabvoton controller. Everything is done through the MQCON app and should be done prior to riding your high-powered e-bike for the 1st time.
Visit www.e-streetbikes.store/ for more info or feel free to contact me at estreetbikes@gmail.com
Super73
Ariel Rider
Huck
Onyx RCR
E-Bike
Electric Bikes
Surron
Пікірлер: 173
so i just spent about an hour with a motor failing the hall test over and over again. it wasnt making sense to me because it was failing on both sets of hall sensor wires coming from the motor. i tried both sets several times and then did a really thorough inspection of the wires including very close inspection of all hall sensor wires attaching to pins inside connectors. i was about ready to open the motor and inspect the wires inside when i had the thought to come watch your video and make sure i wasnt doing something wrong. i wasnt, i was doing it right but i immediately noticed your motor spinning forward during the hall test and mine was going backwards. i swapped the blue phase and green phase wires and passed the hall test on the first try. thanks for having this video here bro, much appreciated.
Bro! You’d really be successful on KZread if you uploaded more videos. This was super informative! Thank you..
@e-streetbikes6381
Жыл бұрын
I appreciate it man! I would definitely post more but too busy with new builds and my new e-moto I'm creating. There will def be more content to come once the new bike arrives. Stay tuned!
@frankroach9346
Жыл бұрын
He’s plain and simple ❤👍
@johnw614
8 ай бұрын
I agree, you cut through the nonsense. Love to see a bike wired from scratch to a motor with this or another sabvaton controller
@ytsoulcollectorvi1695
6 ай бұрын
@e-streetbikes6381 what about torque any suggestions make a video
Just got my new controller with 3000w kit and this info was great to know. When I did my hall test, I could have sworn the wheel was spinning in reverse slowly but it seems to be fine otherwise. Crazy fast bike now coming from 1000w.
@e-streetbikes6381
Жыл бұрын
That's normal during the hall test. Yea it's a big step up from stock lol. Enjoy bro
@leoelegado
5 ай бұрын
What is your battery power? My 3000watt motor and 80amp Sabvaton come tomorrow! 72v Battery from NB Power, I’m super excited. This video definitely helped me.
I normally don’t sub but your information is gold.
@FBAExapt
Жыл бұрын
Me too! Super helpful!!!
been looking for videos on this for awhile now appreciate it. good info subbed
Thank you man, I might need to ask a few questions in a few days 👍🏼
thanks, Sal. good info, keep putting out these videos
Duuuude you def gotta make more vids, ive seem your build on other youtubers vids, you're def knowledgeable
I have to say that your videos are exactly what I've been waiting for unfortunately your days of riding ebikes are over (to valuable man your like Gretzky was on Sega Hockey all 99's). Been cursing at this kit for two days unplug and bingo. Putting on my blue Mojave only because I hadn't seen the Grin Controller. Electric Bike race in Huntington Beach Super73 by Roland Sands try to make it.
If you want more.power turn on hard start and acceleration on 10ms so it'd instant torque
Straight forward talking. Thanks
Great video
This was a good video, But I would have liked more information on what exactly doing these procedures accomplishes! Nice job!🙂
@johnw614
8 ай бұрын
I believe the hall test orientation the controller mofsets with the windings of the motor, so they are all in synch. The field weakening modifies the power to the motors winding as it spins to allow it to spin faster. But, I'm just guessing... :)
Very helpful . Should this still be done the same if it isn’t a hub motor?
That’s great thank you so much but do you know what setting I need to put on a computer 💻 to do the test as I have done all of it and I always have an error message different ones every time so if you could help that would be awesome cheers mate
Thank you rock N roll ,l I've got a reading of 99.9
0:23❗‼️ bro thanks do much
Good day sir, i have a queston. In the hall test part, how do you know what to input in the motor parameter? (in your case its 300).
I have a sab 100a set to 3gears with (push button 3gears) all the gears maxed out to 1 speed, how can i limit the speed between gears? The battery is 72v 50a bms i set the controller limit to 65v 50a and n its doing 40mph which is a comfortable speed for me but do you think the 50a limit is why all my gears push the same speed?
Have you got video to remove brake sensors i want to do wheelies on mine without cutting off and still keep regen breaking on?
Hey brother, I have a question. Why is it necessary we leave in the bluetooth usb? Does it keep the parameters saved to the controller that way? Thank you in advance
If this works your getting the subscribe. Thank you for sharing regardless.!
Im having trouble getting it to work with my 48v battery, it keeps saying low battery warning. Also are you sure the Bluetooth dongle needs to be kept plugged in even though i don't plan on programming the controller on a ride?
hey thanks for the tips. i'm getting an error code 7 on my display and am stumped trying to fix it. replaced hall sensors already but it's still bugging out
Nice instructions. I subscribed! I have a bafang 1000w geared hub motor. I would like to get this controller and wire it up as the one i have now is only 25A. Would you reccomend the controller model in this video and display to use? Thanks.
@e-streetbikes6381
8 ай бұрын
Thanks! I would say the 80a version or even the 45a I have on my site should be more than enough. You'll definitely see higher numbers in the top end and even some more torque.
👍🏼 *well needed content! My situation is turning up my power via the controller they got mine on 17A ( 72v 12000w B-clone) I got same controller and I got password, can u make vid on turning it up from display controller settings?* 👍🏼
@kiiingrook8592
Жыл бұрын
Try password 1801 for advanced settings
@jackstange9211
Жыл бұрын
@@kiiingrook8592 I have this controllertoo. Whats the advanced setting? How do I access them???
Does it support the grizzly? If not what controller can I upgrade the grizzly on.
I'm confused. My display isn't compatible with my controller at all however! I need it in order to turn the system on and go for my ride. Could I still enter the app and tune the bike with an Imcompatible controller? And my display uses a three pin tube connector and another 3 pin connected to the controller
hi I have an F1 ghost motorcycle I bought the USB key on Aliexpress to program it with the application the problem is that the speedometer indicates the units in miles and I would like in km/h. do you know how to do it? because in the application on my cell phone I don't really see where it could be. THANKS
Hi dear, good information, thanks. My question for Halltest: Is it mandatory which direction (forward or backward) the wheel is turning during the test ? I can`t get the wheel turning in correct forward direction for the test, it always turns backward. Also when I change before the motor direction in the app, no impact. Always backward ...
@Whyze125
Ай бұрын
Your phase wires are in wrong positions then
Finished E-BMX last night with Sabvoton 72150 and MXUS 3K Turbo. Could not access the programming functions until watching this video and learning you remove the 3-pin connector for Bluetooth programming to work. Thanks! Its absolutely mental BTW, cant keep front wheel down, cant go past Level 3 yet! Why do you say keep bluetooth adapter connected (I removed mines and its fine)?
@deswr1
Жыл бұрын
No need to keep bt connected yes just for inconvenience
Thanks for the video! Is it possible to wire the regen to a handlebar mounted switch or map another throttle to regen?
@e-streetbikes6381
Жыл бұрын
Yes it's definitely possible, I'll have to show in another video but I mounted onto my old X-Class
@MichaelJHathaway
Жыл бұрын
@@e-streetbikes6381 Thanks for the reply. I am thinking about machining a two lever thumb throttle so I can control regen between two motors.
Hey my man! What’s the drop out ( measurements )on the first generation Xclass 52v ?! Trying to upgrade to a 3000w motor 72v and I was asked during the quote process and couldn’t give them an answer 😫 Please lmk🙌🏿
@e-streetbikes6381
2 жыл бұрын
The dropout for the 3000w kit is 170mm. Let me know if you have any other questions as well! You can also hit me up at +17322586808
GREAT VIDEO brother. I'm gotta. Try this. I need WAY MORE POWER OFFLINE, stock right now. I want MAX REGEN. I need to no how to hook up alarms and GPS tracking, ebrake, locked wheel alarm. Please help were to get manual how to hook up, manufacturer didn't hook that up. I have qs273 2.5t 12kw 72v41.6ah 72150 savington controller. Top speed stock 70mph max me 6 2 250. Also need switch for restricted mode(28mph), eco, sport. Thx for any help.
Is there a way to setup your regen braking on a button so you can use as a brake when needed. Sabvoton 200 amp controller
@e-streetbikes6381
Жыл бұрын
Yes you can I have the Regen button actually set up on my other X-Class. I may do a short video on this.
I have a question about the v2 sab Controller. Is it waterproof? I've seen controller mounted on the downtube near the front tire and was curious if this new v2 was waterproof. I'm going to buy a 3kw 72v kit soon and would like to know. Thanks!
@e-streetbikes6381
Жыл бұрын
The main portion that's waterproof are really only the julet connectors which seal properly when connected. I would still recommend protecting your controller from direct water as much as possible.
Hello! I basically did the exact same build you did, Ariel Rider x class, direct drive rear hub and all that jazz. But I just fried my controller. Would you recommend the sabvoton?
@e-streetbikes6381
2 жыл бұрын
Sabvotons are great especially with the NB Power motors. What type of controller were you running?
@jameshamilton9819
2 жыл бұрын
@@e-streetbikes6381 a Flipsky 75100
I am getting a sabvoton soon. Does the hall test need to be done every time I unplug the battery from the controller?
@e-streetbikes6381
Жыл бұрын
No need to do if you're unplugging the battery. I'll usually do it if I end up swapping a motor.
Hi dude I have some issue .. the motor when I’m doing test hall spin the opposite way ..
Hello , can i use pedal asisst with sabvoton ?
If I may, what does the hall test do as well as the flux?
@e-streetbikes6381
8 ай бұрын
The hall test mainly makes sure the hall sensors are running properly. I always recommend doing it if you decide to swap motors. Flux weakening when enabled basically gives your bike a boost in top speed at the expense of some higher temps if throttling for too long.
Watch you video great video but I'm struggling to programe my sabvaton controller. I pulled that wire our the message when connected I get is lack voltage. And when I plug my computer in its only coming up with tx button flashing not both can you help
@e-streetbikes6381
2 жыл бұрын
After you unplug the 3 pin display wire, you can access the settings via the MQCON app on your phone.
Hi why do you have to have the USB DONGLE Plugged in all the time? Wont it work without that. Can you help me I have 72V Battery, 84v when fully charged which gives continous 50amps and burst of 100amps. My Controller is sabvaton 45 amp. I have to put these variables in myself to the app. DC CURRENT (A) my controller is 45amp max so I guess I put in 45amp/ (b) Boost Current. I don`t know about this. My Battery is 100amp burst so Do I put in 100amps? (c) rated phase current. My Controller is 45amps so I guess this would be 45amp (d) Max Phase current would be 2.5 * 45 = 112.. I took it for ride and I was not getting the full power. I was getting less than half the power. Thanks for help
Hi mate really liked your explanation of the Controller We are stuck on similar thing we wire it all up hall fault error 07, it's a sabvoton 72150 , 72v 80a polymer battery, on a stealth b52 bomber, we can connect to the app bit it won't communicate, it' reads everything but when I try hall test the app doesn't respond, I've sent a video to the seller but not got back to me
@e-streetbikes6381
Жыл бұрын
I would say try swapping the blue and green hall sensors. Let us know if it works for you as we're curious. If the wheel goes backwards, just change the motor direction in the app.
hi, very good video. I have error code o2h,controller protect. any idea what it could mean? thanks
@e-streetbikes6381
Жыл бұрын
That is the controller's safety feature that will turn the throttle off if anything hits the controller (sometimes something heavy or metal). If your sabvoton is in your bag, make sure there's nothing heavy or metal in the same bag that can come in contact with it.
My MQCON app seems to be saving settings, even though the 3 pin connector hasn’t been disconnected from my display. Is that possible? The settings in the app don’t revert back and it appears changes are being made and saved. Can you confirm if it’s possible, or does that connector need to be unplugged for sure?
@e-streetbikes6381
Жыл бұрын
As far as I know it's not possible. It could be some error w/ the system causing that to happen. I would continue unplugging the 3-pin before making any changes.
So would tuning it lower have a lower speed? Cause I want my bike to go 25mph for now and when I want I can switch it so it goes faster.
@e-streetbikes6381
Жыл бұрын
You can always run it on mode 3, which caps around 20-30. Speed modes always reset once you turn off and on the display.
What if after doing the test and tune it goes backwards instead of forward
Hi, I lost the Bluetooth device that come with the controller, is there any way that I can use any Bluetooth
Is there a setting in the MQCON app to lessen the amount of acceleration?
@e-streetbikes6381
2 жыл бұрын
The only thing I can think of is to turn off the flux current in the settings
How can we speed up a 60v 50 a battery through that app with those specs
what happens if you boost up the motor parameters in the hall test screen.i put mine at 1500 and there was a noticeable difference.
@e-streetbikes6381
Жыл бұрын
As far as I know that's meant for hall calibration so I haven't really messed with that. If your looking for top speed adjustments, you can adjust the flux weakening.
Does this setting apply to all controllers? Because not all of us have the same specs as you
@e-streetbikes6381
Жыл бұрын
This is just for the Sabvotons that are in my shop. Apologies for that
How to disable the Speed Restriction on a Sabvonton 60V controller?
Two questions, tuning the controller to those settings will give me the max out of the controller and keeping the flash drive plugged in dose what??
@e-streetbikes6381
8 ай бұрын
Keeping the flash drive plugged in is just for convenience in case you want to go back into the app and adjust the parameters.
So i had a guy install the 2000w motor the sabvotan 60amp controller and a 72v 60ah battery he hooked everything up it worked for 2 minutes i hit full throttle and then the bike turned off the controller was reading the battery at 0% we did tests on the motor and controller with a separate battery they both worked and now he’s claiming that the battery bms was burned out im not sure if the battery is the problem or he didn’t tune the controller right
@e-streetbikes6381
Жыл бұрын
Was your guy able to run the hall test? Make sure you do the test first to make sure it passes. Also, what error code is the display showing? It's possible when you hit the throttle it burned out the hall sensor. Your controller should have a second one that you can connect to. Let me know once you guys have done the hall test and connect your motor hall sensor to the other controller hall sensor.
Do you buy the Bluetooth device separately?
@e-streetbikes6381
Жыл бұрын
I should have extras. I usually try and include them in the kit.
hi buddy dose this controller work out the offset angle itself? and my motor is running backwards when o change it from 0-1 it doesn't move any ideas?
@e-streetbikes6381
2 жыл бұрын
Are you unplugging the the 3pin display connector before changing any of the settings in the app?
@andyredvolvo9434
2 жыл бұрын
@@e-streetbikes6381 probably not it's second hand and all the plugs are changed and lots of brake lines added but thanks it's probably worth a try
@andyredvolvo9434
2 жыл бұрын
@@e-streetbikes6381 thanks mate it worked I was reluctant to unplug as my throttle is connected to the display so was being a little dumb but it's working awesome now thanks again 👍
Hey man, how can you limit a speed controller to a certain watts? Like from 8000kw to 3000
@yakirb.d8134
Жыл бұрын
Do you have a video for that?
@e-streetbikes6381
Жыл бұрын
For a sabvoton, you can turn down the DC current and the phase current in the app.
All all those numbers the same regardless if your using a 48v, 60v, or 72v battery?
@e-streetbikes6381
Жыл бұрын
No this only applies for the 72V system configuration.
@nikinikiniki586
Жыл бұрын
@@e-streetbikes6381 ty!
I just got A 5000w one and it’s comes up with 30H
Привет у меня при тестировании мотора оно колесо крутиться назад. Что делать?
I recently bought Sabvoton 72150,but there are no display wires.Could you help. Thank you!
@e-streetbikes6381
Жыл бұрын
Hey did you purchase from our site?
@Din9mir
Жыл бұрын
@@e-streetbikes6381 Didn’t even know that you are selling it.Can you help or not?
@Din9mir
Жыл бұрын
Never said that I bought it from you. Just saw that you know what to do and decide to ask for help. Purchased it from aliexpress.
Hi, why do you have to leave the Bluetooth stick in all the time ?
@e-streetbikes6381
2 жыл бұрын
It's really in case you need to reset the settings or adjust in the app. I just leave mine on for that reason.
My bluetooth is not recognized by my iphone. What could be wrong? I can't connect at all.
Hi can you help.I have this display and controller.When i go in too setting on the display they wont save so when i switch it off and on again the settings are lost and i have to do them again.Also i only get my top speed on the 36 volt setting on the display which is very strange?
@e-streetbikes6381
Жыл бұрын
After doing the hall test, I usually hit the save button 2 or 3 times to make sure the save went through. What motor are you running?
@martinmorris6351
Жыл бұрын
@@e-streetbikes6381 im running a 2000 watt rear hub motor but i have not got a dongle i bought the bike off e bay. It is a sabvaton 45 amp controller.
@e-streetbikes6381
Жыл бұрын
@@martinmorris6351 ok yea you can get the Bluetooth adapter on ebay actually, they plug into any Sabvoton: www.ebay.com/itm/313903790347?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=313903790347&targetid=1264870805024&device=m&mktype=&googleloc=9004146&poi=&campaignid=14859008593&mkgroupid=130497710760&rlsatarget=pla-1264870805024&abcId=9300678&merchantid=6296724&gclid=CjwKCAiAxvGfBhB-EiwAMPakqihWPE9w3cc0e7gQACX7eXqdCZ8X-pkw6G5COzGC6qdf_CUL_QAKjhoCp-EQAvD_BwE
So why does the controller have a 65mph limiter on it and how do you remove it ?
@e-streetbikes6381
Жыл бұрын
These Sabvoton controllers don't have a limiter on them. You can tune the parameters in the app to adjust.
And what happens if I unplug the Bluetooth? Does everything go back to default setting?
@deswr1
Жыл бұрын
No, you can unplug it
most people should actualy leave flux weekening off,as their batteries ,usually dont have the capacity or the handling capacity of bms ,to take advantage of this feature,for example you have 150 amp controller ,and your bms is rated as 100 amp ,then activating FOC,feild orientated control which is flux weekening,will work against you and lim,it the preformance and distance with no perceiveable gain
@katiekumcgil
2 ай бұрын
if you set 50 on your flux weekening then your going to need 50 to 100 spare amps available from your battery
@MUHLMEDIA
Ай бұрын
Noob tuner here!. . .so if my Sabvoton controller has a 100a rating and my 72v battery has a 60a rating, turn off the flux weakening? . . .is that why my Ebike will go into limp mode and turn off?
Hey man really love the kit! I'm actually helping a friend install it on their X-Class. Followed all the directions precisely but for some reason the QS8 connectors from the Sab to the battery keeps heating up to almost melting point. Everything works fine on the bench but as soon there's any load on it the connectors start smoking and I have to disconnect immediately. All the connections look good and tune seems fine. Not really sure what's happening.
@e-streetbikes6381
2 жыл бұрын
Hmm looks like the blue and the green phase wires might be switched up. I would make sure the hull sensor colors match and if they don't you should switch them. I came across a similar issue with a motor kit that I used a V2 controller (it was meant for a V1).
@RunPlayBack
2 жыл бұрын
@@e-streetbikes6381 I think we may not have seated the QS8 connectors fully and it arc'ed on the first test. We have some new QS8 connectors coming in tomorrow and we'll test it out. I'm like 95% sure that's the reason. Will keep you posted! 👍
@e-streetbikes6381
2 жыл бұрын
@@RunPlayBack For sure! Keep me updated, I'm curious as well.
@RunPlayBack
2 жыл бұрын
@@e-streetbikes6381 Hey man! So looks like we didn't seat the connectors fully. I cleaned the terminals and seated it correctly. Everything works perfectly now! I'll definitely recommend this kit to anyone whose looking for a 72v upgrade. Keep up the great work and thanks again for the support! 🙏🙏🙏
@e-streetbikes6381
2 жыл бұрын
@@RunPlayBack That's great news! Glad it wasn't a bad QS8 and everything worked out 🙏⚡
i did all of that and it’s still so slow and i plugged the cable back in and still says communication error any help? thank you
@e-streetbikes6381
Жыл бұрын
After making the changes in the MQCon app were you able to save the settings successfully?
Im just getting 30h. Everything is set up correctly and my android app doesnt work. It connects to the bike but I cant change any settings. When I change settings they go back to 0 after a few seconds. Yes the 3 pin is disconnected. I have the exact same setup as you.
@e-streetbikes6381
2 жыл бұрын
Give me a call when you get a chance I can walk you through it. 732-258-6808. Usually you have to hit the save button every time you make a change to make sure it goes through.
@UsaRubber
Жыл бұрын
@@e-streetbikes6381 I've tried literally everything. Pretty sure the app is just broken. USB works and is recognized in a PC so I know it's not that. And my settings from back when it did actually work are still saved.
@e-streetbikes6381
Жыл бұрын
@@UsaRubber Are you looking at the app while the 3 pin is plugged in at all? Also what does the error say? Communication error, lack of voltage, etc? Is the error always there?
@UsaRubber
Жыл бұрын
@@e-streetbikes6381 pretty sure the app just no longer works. Everything else works
What if i have a 3000watt motor 72v 80a bms kit? is 50 for flux weaken ok?
@e-streetbikes6381
Жыл бұрын
Yes 50 is the highest you want to go for flux weakening.
@myking3985
Жыл бұрын
@@e-streetbikes6381 so I tried it and itll start overheating and cuts off my power limiting to level 1 barely moves….🥹🥹🥹
@e-streetbikes6381
Жыл бұрын
@@myking3985 Did you do the hall test before running the motor? Be sure to do that first then adjust and save the flux weakening when ready. Also, make sure you're xt-90 cables are set properly all the way. Any gap can cause the connectors to smoke.
@myking3985
Жыл бұрын
@@e-streetbikes6381yea of course, that wasn’t the issue, I run two 72v 80bms 20ah with a dual module, my over voltage was set to 80 (v) maybe it was just too much, either way I ended up just running stock setup, i rather have the efficiency, i can still hit up to 50mph at level 5, and I prefer the stock torque, since my bike is heavy roughly 160lb
@e-streetbikes6381
Жыл бұрын
@@myking3985 that's pretty strange especially on the 80a Sabvoton. Over voltage is usually set to 95. If you want try and adjust it to 95 and see if it gets you the results you want in terms of performance.
Hi I just subscribed to your channel and I find your videos very interesting ... Can you help me?? I bought an electric bike with an 8000Watt motor and the subvoton mqcon SVMC72150(M) and I have a 72 volt battery..... I can not understand why my display tells me that the charge is 81.7 volts .... and even after 5 km the voltage is always the same ...... Then the odometer is not real and from 0 up to 80 km/h it arrives after 3 meters.....in short, it's all wrong... What can I do???'help me please please...... Thank you
@e-streetbikes6381
Жыл бұрын
Hey how many AH is your 72V battery? Also what diameter/size wheel are you running? It always helps to have the most accurate wheel diameter entered in the display to give you a more accurate odometer reading.
@PeppyFpv
Жыл бұрын
@@e-streetbikes6381 26inch batt 72 volt
@PeppyFpv
Жыл бұрын
ho una batteria da 72 volt 40 Ah e la ruota è una 26x4.00 il mio controller è un SVMC72150 (M)
How do you change from kmh to mph?
@e-streetbikes6381
Жыл бұрын
In the display setting after you hit "M" twice, go to system and you'll see the option for metric system at the top
Why do you have to have the bluetooth connected at all times?
@e-streetbikes6381
Жыл бұрын
Just in case you need to adjust the settings in the future without looking for the Bluetooth dongle. You can lose those things pretty easily so best just to leave it connected
heya im sure you know that the sabvoton app really is only a rough setup ,to get the real magic out of a sabvoton you need to get into the pc programing software ,allows much finer perameter details ,better power delivert and power usage plus quite alot button assignments too
@katiekumcgil
Жыл бұрын
the big advantage is with fluw weekening and variable regen brake levers
@katiekumcgil
Жыл бұрын
yeah and activating can bus so charger the bms the controller and all accessories commuunicate with eachother ,with only 2 wires
Where did you get the Bluetooth device ?
@e-streetbikes6381
8 ай бұрын
It comes with the motor kit
@Louisxs650
8 ай бұрын
I can't find one. Would you know where I could get a Bluetooth like that?
How did you get MQCON in English?
@e-streetbikes6381
Жыл бұрын
It came default like that in the App Store
I have two questions. 1. How do I change it from kph to mph? 2. Everything on my display is mirrored for some reason. Would you know if that’s a setting? Everything looks fine, it’s just that everything is backwards. Thank you!
@e-streetbikes6381
Жыл бұрын
Make sure you double press the M and go into system settings. From there you can cycle the settings under Imperial to adjust it.
@e-streetbikes6381
Жыл бұрын
There is also an option somewhere in the settings where you can adjust the screen orientation.
I have a friend that bought a bike from a bike shop it’s a stealth bomber with a Sabaton controller…it’s a 150a one…his battery is a 150a BMS 45AH battery….the shop took the Programming module, and won’t give it to him…they also have a generic Digital display hooked up to it…..im Wondering if I can use my module to turn boost mode on his bike. My bike has a 80a Savoton controller with a 80amp BMS battery…..my bike is faster’ and should not be able to beat his bike….The shop disabled boost’ basically nerfing his bike’ his bike is heavier…including rider weight He’s about 85pounds heavier include rider weight’ I know they disabled boost…his bike has no acceleration, and he’s only getting 60mph top speed….mine is getting the same top speed…his bike should be killing my bike in a race.
@e-streetbikes6381
Жыл бұрын
You definitely need a button for boost mode unless you set it at hard start. You can plug it into the computer directly and you won't need the bluetooth module. It's a lot easier with the Bluetooth.
@ebperformance8436
Жыл бұрын
@@e-streetbikes6381 I was able to get into his bike with my module….we turned on boost….but the bike ran slower, I eventually reset the computer, and did the haul sensor test…and turned on boost, it now runs a lot faster. Now I know the difference between a DIY bike vs a store brought one….it didn’t have the color display, and many wires were hard wired into things, like the lights….the display was hard wired into the computer…I had to jumper 2 wires to get into the computer… the bike shop took the module…purposely….if he gets a short In his system, he’s gonna have to have that module for a reset. The owner wants to buy a more powerful bike….I’m trying to convince him to build his next bike.
There's a problem nobody can fix, push 3 gears! All my gears give me the same max speed n nobody can figure out how to separate the speed between each gear. Lets see who can solve this? Even the manufacturer have a hard time helping me out lol 😅
(connection error)
Thank you brother! best video i've seen on this! can you recommend settings for max torque like for wanting to wheelie a 5000W 72v stealth bomber clone? I can wheelie pretty good on 3 but 1 and 2 are limited. 3 could probably be a bit better. thanks in advance! 72100 sab controller 72v 32ah battery with 100A? ant-bms. tops out at around 52MPH I'm only like 155LBS. 20" wheels front and back. moto seat.
you want a job tuning these controllers from my company? we are in west babylon long island.
@e-streetbikes6381
2 жыл бұрын
Would you be able to shoot me an email? estreetbikes@gmail.com
That irritating music makes my ADD not able to follow this video
What’s your Facebook mate really struggling and my bike keeps cutting out
Hey bro like the videos do you have Facebook 👌