BADASS!!

@kandyman5315

Жыл бұрын

👊👊

If US car makers paid half as much attention to this kind of detail work, they would have been the number 1 car makers in the world by now.

@whiteviper1979

10 ай бұрын

Yea but they don't give a f#ck about quality nowadays on 97% of vechiles! The only thing they give a d@mn about is making lot's 💰🤑💰! and do it as cheap as possible using crappy AF parts!!! New vechiles SUCK!!!

@johnf6267

9 ай бұрын

And each car would be $15k more.

@compytv8636

Ай бұрын

My 2016 f350 is rusting like it's 25 years old 😂😂

keep up the good work ur one of the handful of guys on here that really know there stuff i only know because i have been in this industry since the mid 70's

You are progressing well on the Cutlass Kandy Man the owner should be very happy with all the work you have put into it👏🙏👍John UK

DP is some really good shit.

Awesome can’t wait to do a project like this one day

The body panels look fairly straight! I hope my 71 will be like that 😊JR

Nice job....car's going to look great

Rust never sleeps...

Great job so far

Awesome rust on steel is like cancer in humans must be eradicated thanks for sharing 😊😊

If I ever needed a car painted, it would have to be this guy. You know it’ll be done right.

@edwardgibson19

3 ай бұрын

And it wont be cheap But worth the bucks

Need more update on this cutlass buddy! Great video

@kandyman5315

11 ай бұрын

Coming soon 👍

I loved the video.

I see your using the 3m Versaflow respirator those are nice no extra hoses laying on the ground.

I'd recommend when stripping a car like that to bare metal, you use a metal conditioner. we use deoxitine 624, you scrub it on and wash off with hot water and blow dry it off, it will go a rainbow colour. once it's dry you don't need to prepsol or anything just mask up and epoxy over it. I also wouldn't recommend prepsol over bare metal I've had it flake and fry my primer before especially polyester primer if you had to clean the metal and didn't want to use deoxitine we use acetone or meths.

@kandyman5315

Жыл бұрын

Thanks for the support

@coastaboi747

Жыл бұрын

@@kandyman5315 no problem, just my 2cents, you guys doing a great job. keep it up 😀

@kandyman5315

Жыл бұрын

We did wipe with alcohol prep after prepsol just forgot to mention

@warrenlewis3977

11 ай бұрын

I would have Osphoed it then epoxy.

I enjoyed the video but a question; Why didn't you remove the top before going this far? If you had you could have also made sure there was no rust in the area where the rag top and metal meet. This would have been the time to have that done as well for a complete metal prep with the epoxy? I realize you have other videos on this car, and this is the first video I have watched on your channel. Perhaps you have addressed this area of concern on an earlier video? Thanks Phillip Hall

@kandyman5315

11 ай бұрын

Yes has been addressed somethings get missed on camera thanks for watching

Another great video mate ..can you show me how to walk the side off a car ..I’m to frightened aways wanted to shoot a full side but it’s daunting , thanks kandy man

@kandyman5315

Жыл бұрын

👍

Good job

Thank youpal.

Cannot wait to find out the steps for going over epoxy. Kandyman what are your thoughts about etch primer? I think I remember you using it over aluminum but what about steel?

@kandyman5315

Жыл бұрын

Etch primer is a good product but epoxy is better

@jeremyr7147

11 ай бұрын

Etch is old school and not 2k.. etch will not hold out rust alone like epoxy

@kgoutdoorsolutions430

5 ай бұрын

What’s a good brand epoxy primer

Prepsol doesn't remove non solvents such as sweat. Metho/water does. You should have metho water then prepsol in case there was body oils on it.

@kandyman5315

3 ай бұрын

👍

Do you have a way to clean and seal the backside of the welds? I would image they will eventually rust back out if not. Thanks

@kandyman5315

11 ай бұрын

👍

@kandyman5315

11 ай бұрын

Check out latest video

@wpcc7354

11 ай бұрын

​Awesome man! Thank you for your time. Exactly what I was looking for. Taking your time to make these videos and show the right way to do it helps so many people. Thanks again.

What is your take on the universal primer sealer surfacer DTM type

@kandyman5315

11 ай бұрын

Depends on the brand but they work fine

Do u apply the first coat of epoxy then wait 10 minutes and apply the second coat then wait 30 minutes and then apply the 2k primer over the epoxy primer????......i never used epoxy primer before lol😂

@kandyman5315

Жыл бұрын

2 coats with 15 min flase

What pad do you use to get the metal that smooth

@kandyman5315

2 ай бұрын

Da pad

Can you spray epoxy and high build primer right after ?

@kandyman5315

5 ай бұрын

With ppg yes let fully flash about 40 min and hit it

is the fuji spray he mentioned airless/turbine?

@kandyman5315

7 ай бұрын

No gravity feed spray gun mpv8

Do you need to scratch the primer Before body filler

@kandyman5315

29 күн бұрын

Ppg does have a window where you don't have to. But I always do

@user-yu5jf7dk3f

28 күн бұрын

@@kandyman5315 I’m doing restorations , but I feel like is not worth the pay people want to pay , I’ll say my work is not excellent but is really good . For a good job how much would be a good price to charge for a restoration or a change of color

What stripping process did yall use?

@kandyman5315

Жыл бұрын

From da to stripping wheels finish in 180grit

180grit sanded and then epoxyd is that correct

@kandyman5315

8 ай бұрын

👍

Is that an advantage over dp 40?

@5H4V3D89

Жыл бұрын

Just different color same primer

@jimt3409

Жыл бұрын

@@5H4V3D89 thank you.

Dude how big is that spray booth .

@kandyman5315

9 ай бұрын

30x30

@hobbyautobodyfun9315

9 ай бұрын

@@kandyman5315 nice I never painted in a booth looks great 👍

Why 180 grit?

@kandyman5315

4 ай бұрын

Good scratch

I thought 80 was the standard for epoxy

@kandyman5315

4 ай бұрын

I like 180

Epoxy is optional on a vehicle stripped by machine or chemically but not a must.

@thomasstott527

11 ай бұрын

some of us dont agree ... epoxy is a must on bare metal for proper adhesion for every step after and to seal metal... chemically stripping is a entire different video... if you use a chemical to strip it must be properly neutralized or you can have problems later in the paint job... the safest way to strip a car is good old DA and 80 grit... chemical you have to neutralize ... sandblasting can warp panels and you will never... ever ...get all the sand out... dipping you can never safely apply primer to all areas stripped to stop rust prevention... all stripping is flawed... but to people building cars correctly ...epoxy is a must... people like Kandy man are doing every thing right!

@jimk7882

11 ай бұрын

@@thomasstott527 Epoxy is only a must on a sandblasted car. I never sandblast cars because as you said it warps and it also stretches panels. Almost all vehicles have a clear electroplated coating on the metal from the factory. Only the blasting method of stripping paint removes that coating. Again,only blasted cars need to be epoxyed.

@thomasstott527

11 ай бұрын

@@jimk7882 well that is your opinion.. not a wise one.. but you have the right to have one..

@jimk7882

11 ай бұрын

@@thomasstott527 Wise and proven. Hopefully someone else will read my dialogue and save on materials they don't 'need.'

@thomasstott527

11 ай бұрын

@Jim K just curious... who as proven this... as every major paint company... primer company and most filler companies say otherwise...