Can’t thank you enough for taking the time to make these vids, walk viewers through in simple terms how to do all this! Truly a life saver as I try my best to fumble through trying to diagnose and fix my vehicle with only basic knowledge of mechanics 😂 I really appreciate you, Sir!!

I wanted to test my starter relay today and watched a bunch of clips on YT. This one is the best I have seen. Simple, step by step from beginning to end, very methodical. A one time explanation and one time understanding.

Thank you so much for your easy to follow and understand video as I’m having just such a problem on my 1996 FourWinds, Class A, motorhome. I’m hoping to learn some basics before a mechanic starts replacing one part after another as I’m a senior citizen female. I believe I’ve an honest mechanic but I feel better having some knowledge of how things work even though I’m not comfortable doing any such repairs. I did opt to pick up (2) new batteries as the deep cycle marine battery was 12 years old and wasn’t charging on a trickle charger. The engine battery was a 5 year battery with only 7 months left on it’s warranty and I don’t want to get stuck somewhere along my travels. So those have been installed but still no turn over. I asked about the possibility of the ignition switch but after he attempted several tries of starting and removing the doghouse cover he next went to the starter relay. Just waiting for part to be ordered in the morning and installed. But before he installs the new part I’ll ask him to test the old one.

congratulations on the fine job you do explaining things.

Thank you, nice and easy and thorough and complete. I was going to buy a relay for $50 not knowing if it was good or bad. But now I can test it and see if it is good or bad.

Thanks for the info. Its a great help for me as novice in the Automotive. It enhances my knowledge on this field of industry.

Thanks a million for showing the trim removal! So many other vides show the relay with the trim already removed.

You are really good at explaining. Well done.

Very easy to understand. Thanks a lot

Thank you for taking you’re time on this video

Thank you. Going to check started relay on my 1981 BMW R80/GS.

Great video mate, I do lots of mechanical work, but know very little about electronics, this may prove to be an invaluable piece of info for me. Thank you!

Dude - this was a great video. Yes, have the problem you outlined and I feel confident I know how to do the test.

Wow this was so explainable and easy to understand, Thank you.

Many, many thanks for your well made video on how to use meters to check electrical parts. I really appreciate that. You went even beyond ... for us to lose the fear of doing something wrong. Many regards from Florida

@joegriggs9562

2 жыл бұрын

)t

Thanks for the information. I will check it out now.

Excellent explanation, I learned a lot. Thanks you so much.

Well done mate good explanation.

Thank you so much...🙏

Thank you for the useful video.

10/10 video! Very well done!

Learn alot thanks for the video

Love that you took the time to be detailed and show step by step. Keep up the great videos. Used your channel for multiple things now.

Thank you very much for the video! I tested the ignition coil and starter relay and both show (sound) continuity but neither click. Could this be because they are both stuck in the closed position?

I agree with the guys very good video. Thanks alot

Great job indeed thanks a lot 🛠

Good video bro! Saved me time. I used stranded copper speaker wire to wire it to my car battery. Super ghetto but i got it done. Relay is functional, and has continuity when live. I've also tested my motorcycle relay months ago before this video, but it was way more straight forward. the power and ground were obvious, this relay it wasn't. relays good, my starter motor isn't. Need a new one. rofl hardest part was when i realized.. (bulky jumper cables) aren't the best way to put power on it.. haha, so i swapped to speaker wire. worked will, i tied it on and it was functional. Keep up the great work! We appreciate it.

@CarsNToys

Жыл бұрын

Thank you! Appreciate the feedback

With Denso 4 prong relays the copper prongs are the ones that connect to components, or load (terminals 87 & 30)& usually they're a little larger as well, so the ones you connect to power will be the smaller, less coppery colored ones..#s 85&86

Nice concise presentation. Thanks.

@CarsNToys

4 жыл бұрын

Glad it was helpful!

As always, a thorough, very well-organized, very well presented tutorial. I

GREAT VIDEO DUDE THANK YOU FOR SHARING, Rock on

@CarsNToys

3 жыл бұрын

Rock on!

I actually searched for a non-working snowmobile electric starter and got this video ! I actually pulled out nearly the same relay from my sled's electric starter that wasn't working ! I just ordred the relay hopefully it will work and turn over !

Excellent video thank you!! 👍

Good video. Not too long and to the point. 👍

You know how to teach and make a video. Great A+++

Great video clear instructions very helpful

@donellstovell6381

3 жыл бұрын

Thank you

I say it all the time you learn something new everyday no matter how old you are good job thank you

@CarsNToys

3 жыл бұрын

Thank you. Appreciate the feedback.!

Great video

One word ultimate explanation

Great job , thank you......way to go

Nice job my friend!

Relays usually have markings on top denoting pin functions. A "ww" represents a resistive load - that of the relay's coil. A "NO" is normally open contacts...a "NC" being normally closed. Hope this helps.

Thanks A lot for the info, did it and my mdx started right up. This was Supremely helpful

Very informative

Nice work man 👍🏿😘

When checking for continuity on the horizontal prongs, as a final test, can you also check them with either a test light or the multi meter set at 12 volts?

Thanks man for making a good video 👍 no ramble ... you got right to the point ...I fixed my issue within 10 mins I was back rolling again

@CarsNToys

4 жыл бұрын

Glad it helped

@Africanrealitynewscom

3 жыл бұрын

Can this affect modern 2017 till date car also?

The best video for the problem

Excellent!! How do you check using the battery?

Another great job with the video!

Great video !!!

thank you brother

Nice tutorial sir...

Cool, it saved me a fuel pump :))) Thanks a lot.

Excellent

Very useful video. Like!!

👍 GREAT , THANKS, NEED TO BUY THE TOOLS, TRIM REMOVER & 12 VOLTS DEVICE .

I get it now, thank you.

Keeep rocking,,,

Thanks so much!

Since it is for the starter would it be a solid state relay for high current draw ?

Thank you

Thank you for the help.

Thank you.

That's what I call a PERFECT VIDEO.

Can a loose wire affect my car relay as it won’t start and when scan not connecting with ECM and anti theft system was displaying on the dash as it all happens when I was trying to fixed my seatbelt and got the airbag wire ripped

Hello, can this affect also a 2017 vehicle? With a push start button?

smart presentation

Very helpfull god bless

Hi, I have a problem with my Honda CRV 2007, 4 cyl. When I started the car looks like my battery is low Volts or my starter is heavy to turn. I change the battery and starter but still doing the same, the motor start but on winter season is more slow to start and some times I run out the battery power. Thanks for you cooperation.

Thx. Great vid. I was starting to work on my 2010 Sequoia 5.7L and that will take me days. So I found your vid and did what you said. My starter relay is bad. You saved me $200+ and days of labor. Thx. again.

@kimberlykinch5896

2 жыл бұрын

Y

@johndough2624

2 жыл бұрын

What symptoms was it showing ?

So at the multitester is it using am which the red color cable insert?

Cool!

Appreciate, understand it very well thanks you

I have a situation where my tractor is starting, but the starter stays engaged after i let go of the key. If I turn off the ground (my tractor has a ground disconnect) then the starter disengages. Is there an electrical test I can do to make sure the relay is not at fault?

Life saver man this fixed my problem. I replaced my battery for nothing but at least its new now lol

Nice

Nice video ..what is wrong if the engine check light does not come on when ignition is on?

Awesome

Thanks

Tank you

I just wanna say thank u so much ,,, boom my realay was fucked ,,, wouldn’t av none this if it wasn’t for your brilliant explanation of testing ,,, thank u 🙏 Adam

@CarsNToys

Жыл бұрын

Glad it helped!

When I pulled my toyota corolla starter relay out, I saw something creamy sticked to the contacts of what seemed to be grease? Where that peanut butter could come from? Even the base of the relay has the same things and contacts are almost covered with that. Will I have to purchase the whole box where this relay and fuses live? Can I wash it down with alcohol? Is the sunny Florida also melting the electronic components of our cars, besides al the rest of the plastic components? My car with a 12.7V battery just gives me a "click" but it does not crank or start when I want but much later ...

I have a 1996 dodge ram. And it starts most of the time, but there's sometimes that won't do anything. We got a switch adapted to it that would get it started. Any idea what it can be. Thanks.

This shows when it is working, but if it is going bad, the relay would be giving continuity but be jumping in ohms up and down correct? Therefore in need to be replaced

Will a relay stick close so that it drains the battery I’ve got no power to my fuel pump brand new I had power when I put it in

good lesson. i make car fuse and fuse tap .

do i have to disconnect the battery to remove the starter relay? is it required?

Overall good video, however, towards the end, you zoomed into the prongs on the relay itself, and you should have zoomed in on the tester to show what will happen to the display when you have them touching the correct ends... what does the LCD do? Overall, good, but that could have really solidified the explanation.

Thakyou

Hi will a relay fault throw a warning light on the dash?

So when this relay goes out is it permanently shot or maybe sometimes works sometimes don't ?😂. My car it's random no start but🤔 I do hear a single click from I think the ignition switch Great video, and much appreciated .🙂

Hi ik this is a old video but can anyone help me out on checking why my toyota tundra 2008 is not turning on like it turns on AFTER u put only the red wire to give it a jump start after that it runs great and no problems but when u turn it off it those not start back up

What if it cranks on a push start but it's not your battery or starter ? Your explanations are nicely detailed btw.

@imrnkxi9554

2 жыл бұрын

Check the fuel pump/lines, spark plugs and ignition. Cars need combustion to operate and most times you’ll have a clogged fuel pump

and if it is a normally closed relay contact you blow your power supply... or at least the fuse in the ps if it has one.

Got this clicking starter overnight without earlier warning..new battery now..still same thing..naybe contacts to solenoid?

Excellent video!!! Can you write the tools you use in this video?? Please!! Thank you for this video!!

@danhitt167

Жыл бұрын

He listed most of the tools in the video description but not the battery pack ( as of 2022-09-15).

So if the relay is bad the vehicle won't start? Does a qx56 have a relay switch?

Does this test help when a starter motor is just spinning continuously? Even when key 🔑 is out of the ignition I have Mercedes Benz b class cdi 180 2010, Manuell, diesel.

@CarsNToys

3 жыл бұрын

I'm afraid not. This is simply if the starter is not cranking.

What about a Chrysler Sebring convertible 2005¿, first while driving you could hear click n crank, the gas was low but I was close to home so I decided to try n get home. The car died out 2 miles away. So the battery has power. Light sensor etc works. But turning the key itll click n Yeah, then nothing . What is your opinion???