Car Not Starting or Turning Over Help | A Step by Step Guide
Автокөліктер мен көлік құралдары
Today we'll go over the step by step process on determining why your vehicle is not turning over. We'll be checking battery connections, battery health, condition of the starter, the starter relay, ignition switch and the inhibitor switch or transmission range switch. This specific vehicle is a 2006 Acura TL. This vehicle had no problem, it is simply a how-to video.
Sections:
Battery Connections - :22
Battery Testing - 2:22
Removing the Battery - 5:51
Testing the Starter - 8:11
Starter Wiring - 11:15
Jumping the Starter - 13:47
Starter Relay - 14:50
Ignition Switch - 18:03
Inhibitor Switch / Transmission Range Switch: 18:40
There are many reasons why a vehicle won’t start. The most common reason is a dead battery which is what the car uses to provide electrical power to the entire car and electrical components (e.g. lights, radio, etc.). Another reason could be bad battery connections. Other reasons include alternator problems, bad starter motor, bad ignition switch, fuel system problem, engine problem and smart key issue.
► Subscribe: / carsntoys
►► Tools and Supplies:
Battery Tester: amzn.to/36Ia1cu
Digital Multi Meter: amzn.to/2KOdFZD
Dremel Accessory Kit - amzn.to/39UBM3p
Safety Glasses - amzn.to/2oU2PsK
Ratchet Set - amzn.to/30OkfEd
Alligator Clips - amzn.to/2AQot3H
Dremel Accessory Kit - amzn.to/39UBM3p
►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is a member of the Amazon Influencer Program.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
/ carsntoys
#nostartnocrank #nostarthelp
Пікірлер: 195
Wanted to extend my personal thank you for making this video. This morning I feared for the potential loss of my job but something told me to just look online one more time before just letting go, and I stumbled on to your video. My issue was exactly the first thing you mentioned and quickly I had the help needed to get the job done and get to work on time. Again thank you!
This is an excellent video. It's loaded with valuable information and not any wasted time!! Excellent work!!
Thank you! I’m getting the click and you’re the only one who has mentioned this is normally the solenoid + checking for continuity.
Thanks for sharing the detailed knowledge. I did not want to deal with replacing my starter so tested everything else first on my TSX. It endeded up being the starter, but now I know what to check first including testing relays!
just want to thank you for the most direct and pleasant tutorial i had ever experienced . after i watched your channel, i decided to venture on some other very popular mechanic and it was a disaster from the beginning of his start he started talking about a book to his neighbors barbecue! thank you for not trying to kiss up to your viewers by giving bits of your personal life. i couldn't even stay watching because he took to long to show you how to. i'm not a mechanic but i am a all around handyman and i enjoy watching you tube and mostly masters on there gifted profession i just added you to my subscription. and I'm sending you a contribution. God bless you and your family.
Thank you for sharing. This video has helped me this morning. I followed the steps and managed to start my car. Once again, thank you so much
Great and very thorough professional presentation my friend . You make it easy for even a dummy like me to comprehend. Wish all u-tube vids were as simple and plain .
One of the best tutorials out there with accurate information..thank you! It helps how you show and explain things.
Thanks for your video here, my truck was making a clicking sound replaced the starter still no start. After watching this video i was able to chase down the problem starter relay. being a shade tree mechanic all my life i'm 67 years old this video put me on the right path Thanks so much for the help. when you have a problem like this it can truly wear you out mentally until you get it resolved.
Thanks for helping me. For I was frustrated when my car refuses to start but your advice has made it all worked out.🙏🙏🙏
As is typical of CNT videos, this one is organized, comprehensive, and with clear videography and enunciated speech
@clivealive55
2 жыл бұрын
Camshaft sensor on Hyundai coupes v6 car
@ddavis7799
Жыл бұрын
Llk8k
Thanks for this video got me and my dad working on my car together trying all the different steps to figure out if it’s anything other than the starter.
I appreciate all your input in putting this instructive and detail video for persons like me that don't have all the expertise in automobiles like your self. I learn a lot and it was very well explained, thank you very much sir.
The best detailed explanation on KZread 👍👍👍👍👍👍👍👍👍
Really good video. You rival Scott Kilmer and Chris with this. You are very kind with information and guides. Thanks coming from the caribbean
@CarsNToys
3 жыл бұрын
Wow, thanks!
What an excellent video. Thank you for posting.
This guy is really good. Very clear and detailed troubleshooting steps for car that won't start. Thank you so much.
Great job explaining all the tests. I’m a mobile mechanic and replacing a starter today on my daughters car. You truly have made the best video on car starting problems I have ever seen. Please keep adding new videos. I Subscribed to your channel and will share your info with my whole Family. Fantastic video quality also. Thanks, Bob
@terrywoodham8844
2 жыл бұрын
[Ooooo[[j,0bu
@andrewnarine3898
10 ай бұрын
I did the relay test the clicking is there but the continuity is not strong is it a bad relay.
Absolutely excellent tech video that is well constructed and easy to understand. Very much appreciate the absence of blaring music, unrelated information, cute pets and game show host speech. Thank you for your help and work putting this together.
@solidsoldier9021
Жыл бұрын
ABSOLUTELY,LOL
Awesome job going step by step explaining what should be done.
I dont usually like long vids, but your vid is really great and so informative. Thank you for the great effort. God bless
Thank you for this !! My range pressure switch was bad. Really appreciate this video 🙏🏾. I have to check out your channel more for Acura videos asap.
great video...clear, systematic explantion!
Good explanation for newbies. Thanks.
Very good explanation. I had some batteries, where was big internal resistance, so it was charged to 12V but under the load there was big voltage drop.
life saver 🙏 tysm I need my car last min and it was disconnect to the battery, thank you thank you!
That's what I call a PERFECT VIDEO. amazing job mate.
A great instruction videos. Easy to follow and full of great info
Great and easy to understand, I hope I find one of these to be an issue with my car
Yes great video, clear instructions no interruptions and ur just amazing thank u
Amazingly helpful!! Thank you!!
[thank, you for walking me threw all you're helpful info.]👍
THANK YOU! I COUKDN'T HAVE ASKED FOR A BETTER DEMO
Thank you so much for this video. Really easy to learn and listen to your video.
@CarsNToys
3 жыл бұрын
Glad it was helpful!
@Jovan-mh2rl
3 жыл бұрын
I'm
You are greatest teaching us. Thank you for your help.
Great video with great explanations
Thank you brilliant explanation very clear helped me a lot
[I, own a 2004, x type 3.0 jaguar I, had the same problem no crank no start. It, was the starter relay that was bad I, replaced the relay it works now. thank, you for you're helpful video👍
Great job! Detailed but to the point. Nicely done! Thanks! My problem turned out to be corrosion on the cables where they attached to the positive battery post. My guess is the post kept getting corroded, kept getting cleaned but the cables were “infected” as a longer term result.
Good stuff my man right to the point
Appreciate your guidance
best video out there. thanks a bunch
very helpful thanks for your work
Thanks Bro. your video serve a lot.
Your voice is so reassuring. 😢❤
Thank You, I can feel the Love in your teaching ❤❤🎉🎉. You are a Great teacher, these mechanical things ain’t my specialty lol. Thanks for the comprehensive tutorial 🌞✨🌟. Subbed too 🚀🆙👽
Your videos are helpful, thanks! Regarding your battery pack... it would be great if you can do a video explaining what type of battery options are good for testing relays. I tried to test one of my relays by direct connection to the car battery but I think I fried it! :)
@CarsNToys
4 жыл бұрын
Really? It shouldn't fry the relay unless the wires were crossed. The battery pack I used is an 3s lipo RC battery pack.
Thank you for your helpful video!!!!
excellent information here, I had a starter strand me twice before. luckily i got a duralast with a limited warranty when I replaced it and autozone was able to test it when I yanked it out again, of course it failed and they replaced it but that was not fun (failed after just a year or so of use). Had me thinking it was the fuel pump or neutral safety switch!
Thank you very informative
Very well organized 👍👍👍 helped me a lot thanks
@CarsNToys
4 жыл бұрын
Glad it helped!
Excellent video
@CarsNToys
3 жыл бұрын
Thank you very much!
This is awesome video 👌👌👌👍👍👍👍
Wow that was the most helpful video I watched, I just saved so much money thank you so much!!!
Very 19:49 informative, thanks!
thank you so much for the info....I also have the 06 Acura TL . what if I tried all of that but the only thing that worked was when sometimes i press the gas peddle just a little bit when the ignition is on the ON switch and I will turn the key and it cranks right up.... it doesn't always turn it on. But when it's on it drives fine.
Dude. You're awesome. Thanks for the info. Do you have videos working with Toyotas?
Thanks to this video i just had to open the cap and adjust the plus cable and it started up..even the car stereo works now
Thank you!
Thank you ❤️ so much
70 years ago my old man would just whack the solenoid with a hammer, fixed it every time. now you almost need a degree !
@jesusescobar435
3 жыл бұрын
Agree on that.
@roxysupastarchick
3 жыл бұрын
That's great. Gives you one or 2 more emergency starts. Save that for your appointment to the mechanic
@bnnett
Жыл бұрын
I did that last month
@notcorey2890
Жыл бұрын
70 years??
@jollyroger7624
Жыл бұрын
@@notcorey2890 Yes Corey, we had a car 70 years ago. Look up classic cars, they were modern back then.
With all in good condition that you discuss in this video, I have a 2004 Acura TL, and when I turn the key, I can here the starter relay load up and vibrate. Purchased a new relay, and still the same. After some slow turns of the key It will start. The starter turns the motor over quickly as expected. I did have an issue with a starter switch on another car, and found after replacing, the switch was worn, and had a buildup of aluminum dust and black dielectric grease that caused a poor electrical circuit. I am thinking with the relay vibrating, It may have the same problem and not completing the circuit with a full load to energize the relay as required.
Thank you
Thank you sir your video is very helpful and you helped me by saving money and time thank for that.
Nice video
Mix a very small amount of water with some of the baking soda in a lid or small dish. Then, use the toothbrush to apply the paste to the terminals and clamps. Scrub thoroughly until the white substance disappears. If necessary, you can make use of steel wool to help remove the corrosion, if you dont have sandpaper or a dremmel
@rebel8440
2 жыл бұрын
Thank you
Thanks for this video. I can't find relay for our 2015 Nissan Quest. Would start relay be the the push button start/stop ignition button?? I've thoroughly reviewed the manual, under hood fuse box as well as interior fuse panel and still coming up empty, not sure where else to look for it.
Is there any way you could show how to test the ignition swtich on this particular vehicle like you mentioned at the end of this video. I have a 2006 Acura TL and have gone through all your steps and was so excited when you mentioned testing the ignition switch then you broke my heart when you said you weren't going to show that step....hahaha...please let me know how I can test my switch
The inside of the terminals should also be cleaned. There are brushes made for this. One end of the brush is for the terminal on the battery, the other end is for the inside of the cable terminal. Then wipe them with spray oil such as WD 40. This should be good for a year or two. A step further would be to spray the completed connections with a wax type product such Boeshield, LPS-3, or similar weatherproofing.
@CarsNToys
4 жыл бұрын
Great tips! Thank you.
Hi This Video is great, I have a Toyota Corona 1991 EFI Patrol Car *Battery - Good - Tested with Voltage Meter *Terminals/Posts - Good *Starter Motor is replaced Most of the time 98% of the time when i start the car in the morning fresh it starts quickly. Scenario 1- When i drive the car for a while or keep it running and then switch it off and start it again it just cranks but doesn't start after few keeping still for minutes(random) it starts with longer cranks and giving gas. Scenario 2 - it can be after driving or starting fresh the car clicks with all the lights on dashboards are on,and it doesn't crank at all after sometime (dont know what happens) turning the key several times with hard efforts it starts. Scenario 3 - Sometimes when i start i can see that after i turn the key and keep it pushing for around 1 second or less then it starts cranking(there is a delay in crank) Can you please help me to diagnose this issue It will be really great and helpful. Thank you
@pvtruestmusic
Жыл бұрын
What was it
My lights and all are good on my Focus. It's just sometimes I have turn the key multiple times before it starts.
Genius 😎
It amazes me how that lil gadget detect if anything is working or not
could I be using a jumper cable to do the last technique for the starter motor?
Would a OBD2 be able to tell you what’s wrong without having to check the voltage stuff? My Nissan Murano 2007 lights go on and radio but it’s a no crank no start. Wierd thing is that it shows the red key light like it thinks theft
Also thanks for all the detailed step by step. You really should be a teacher or something
Easy way to test the starter is to remove the starter relay, then with wire short the power terminals on the base of the relay, just like the relay would do. If the starter is cranking you know there's no fault but somewhere in the circuitry.
Nice video, but just for reference......the wifi symbol on the multi meter stands for speaker or sound and not wifi [even though it looks like one] ....that setting is for continuity and resistance with sound, beep, added....the setting to the right of it is the same but no sound...most all meters use these standard symbols....
As soon as you said check the battery cables I felt dumb af man lol sho nuff that was the problem lol 🤦🏻♂️🤦🏻♂️🤦🏻♂️
How do I test the starter switch on the 07 Acura TL? I put a new starter and battery on it and it cranked fine and ran but later it wouldn’t even click. I am going to test the relay but I’m not sure how to test the switch. You think you can help me out ?
Same car I think mi e is the connection but if not it has to be the starter or engine itself
I have a question for u I have a 1994 Ford ranger XLT and I fixed my starter and my battery post and still nothing is turning over so I'm asking u if that means my solenoid is bad
How would we test if power is getting to the starter if we just used the battery ?
I was driving home and my car seat is not the alternator that has plenty of juice in the battery can I be the fuel pump on a 2006 Buick rendezvous 3.5
@carsntoys, Need some additional guidance.. Checked the continuity at the starter (both sides were good), checked the relay (that is good), changed out the ignition switch since it was cheap. I can't get the 06 TL to turn! :( Any additional information??? Battery was new as of 6/2018 Before symptoms started, I would get ONE click then nothing. All the accessory lights and headlights are FULL power.
@jeremiah1797
3 жыл бұрын
did you ever find out what the click noise was,,
@jesseserrano6520
Жыл бұрын
What was the issue? I have exactly the same one click right before the last start up. Now i have no crank or click at all.
my car starts just fine no hesitation sometimes other times i turn key and get no crank or attempt to start but always get all lights. car runs fine otherwise . hot or cold doesnt seem to affect when this happens or doesnt
Hi I’m TJ, need help for my Toyota Avalon 2004, tryed to clear codes by removing both + &- connectors and touch them together, The car won’t crank and start Need help
Hi...why u said solenoid is good when got continuity between s terminal n body motor....What i Know s terminal Will connect to positive ...right. is it cause short when positive iouching negatif..
Is it true that if it's starter then it wouldn't crank at all ? mechanic told me this and it is showing codes had it scanned at both O' Reilly's and AZ . Mine can take more than one try but cranks over though sometiomes verry weakly . Codes PO420 and secondary PO103 Mass or volume air flow circuit high speed and PO113 Intake air temperature sensor 1 circuit high input . Brand new battery .
Is it absolutely necessary to disconnect the battery?
A defective alternator might be a reason why the battery is not keeping its charge. I'm not quite sure how i would test that though...
Just because the battery has 12 volts and the headlights come on does not mean the battery is good , it takes cranking amps to actually turn the starter.
I have the same car it normally starts right away now it doesn't want to starts sometimes
I'm not getting any power to my starter solenoid on my 89 Linc Basket.. What could it be?
This is my question I put a new starter a new alternator and a battery and it still will not start but the lights come on there is no clicking sound
Great tips you should make a video on how to test the park neutral safety switch and also if you have a no crank no start and the check engine light does not light up when key is in the on postion with a good battery then you probably have prolbums with your pcm or if the anti theft light keeps blinking when key is in the on postion then you have prolbums with anti theft system and engine could be seized up if you try to rotate the crank shaft and it wont move
@stevennagley3407
Жыл бұрын
Yeah there’s tons of videos talking about non anti theft start problems but very very little anti theft…
If you use a Dremel on the battery will it destroy the terminals?🤔
@gth882
2 жыл бұрын
Stick with sand paper
My car has no lights come on around the speedo and shit but turns over with no start since it seens like fuel pump isnt sending fuel, when i did this the lights come on but it wouldnt turn over then it when back to no lights but turns over
i had oodles of corrosion. before but i had bad terminal cables i had them rewelded.350.00 ouch. nit sure why u get corrosion in the first place
❤