How to tell if you have a blown head gasket "3 Easy Test"

Автокөліктер мен көлік құралдары

In this video, I will show you 3 easy ways to tell if your cars head gaskets are blown. How to tell if you have a blown head gasket. After watching this video you will be able to test for a head gasket problem and know 100% if your head gasket will need to be repaired. Here are the links to the test equipment I used in the video.
Combustion Leak Tester: amzn.to/2u9WyLA
Coolant system pressure tester: amzn.to/2ptJMlC
Headgasket sealer: amzn.to/2ubs9N8
With the cost of most head gasket repairs, you always want to be sure that is the problem before spending that kind of money on any repair. A second option is always recommended. And as a reminder never open a hot radiator cap.
I don't recommend using head gasket fix in a bottle unless you plan on junking the car. It may get you by in a pinch but is know for causing other cooling system problems but the stuff will work sometimes.
But with a few easy tests, you will be able to tell if you have a head gasket problem in your car.
Subscribe here: goo.gl/j1pCfn
Connect with me:
FaceBook: goo.gl/rKg2Bv
Grease Monkey Art Gallery greasemonkeygallery.com/ by The Flat Rate Mechanic
Instagram: goo.gl/NCjRhM
Google Plus: goo.gl/6AyJz3
Website: flatratemechanic.com
For Promotional offers, consulting, training, sponsorships or other inquiries contact me at FlatRateMechanic1@gmail.com
The Flat Rate Mechanic. 25 year ASE Master Automotive Technician and Advanced level ASE certified
The Flat Rate Mechanic is a participant in the Amazon Influencer Program. #FlatRateMechanic #DIYAutoRepair #headgasket Check out The Flat Rate Mechanics Tool Store on Amazon goo.gl/M8MpdC  
&nbsp:
Disclaimer:
Due to factors beyond the control of The Flat Rate Mechanic, it cannot guarantee against unauthorized modifications of this information or improper use of this information. The Flat Rate Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this automotive repair video. The Flat Rate Mechanic recommends safe practices when working on cars or trucks with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this repair video. Due to factors beyond the control of The Flat Rate Mechanic, no information contained in this automotive repair video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 209

  • @FlatRateMechanic
    @FlatRateMechanic6 жыл бұрын

    Here are the links to the test equipment I used in the video. Combustion Leak Tester: amzn.to/2u9WyLA Coolant system pressure tester: amzn.to/2ptJMlC Headgasket sealer: amzn.to/2ubs9N8

  • @harrisonreed4299

    @harrisonreed4299

    5 жыл бұрын

    3

  • @coolramone

    @coolramone

    4 жыл бұрын

    Thanks FRM. My engine is running rough, oil on radiator cap, using/losing water, and #1 plug was "gunked up". I think it's the head gasket, but no bubbles in radiator at idle. Will try your suggestions.

  • @jessesilva7448

    @jessesilva7448

    Жыл бұрын

    What about a cracked head

  • @user-py8xw5bk1s
    @user-py8xw5bk1s4 жыл бұрын

    Great video. I will try it. My Jeep liberty and absorbing a lot of coolant without leaks detected

  • @steveofsd
    @steveofsd5 жыл бұрын

    Finally someone here on KZread can make a 5 star video. In the past few weeks I've been looking for videos that can help me on my troublesome overheating issue, most of the videos are ok but there're many not worth seeing. My first issue is Background noises, half the time I can't hear the author because of wind noise or compressor running. Sometime other people talking, the worse one was someone was trimming lawn while the author instructing on how to drain the coolant. This video is the best, the engine is running but you can't hear it. The author's voice is clear and in perfect pace. My second complaint is the other videos are moving too fast that give me a headache, half the time I can't see what the author tries to show. Lastly is slow pace and out of order instructions, one author said the word " ..it's like" and "you know" many times, not to mention his accent was in need of subtitle. So this The Flat Rate Mechanic Video will get my Oscar award vote.

  • @FlatRateMechanic

    @FlatRateMechanic

    5 жыл бұрын

    Thank you very much.

  • @tomburch7117

    @tomburch7117

    4 жыл бұрын

    Steve also check your ignition timing

  • @locoosssguy814

    @locoosssguy814

    3 жыл бұрын

    It's cuz your brain dead & shouldn't be working on cars if you don't "you know"

  • @ugenegareth9339

    @ugenegareth9339

    2 жыл бұрын

    you forget majority of comments of people don't know any better, with little to no constructive criticism worthy is the Lamb Revelation 5:13 the fate of the unsaved 2 Esdras 7:100

  • @charlescardenas1121

    @charlescardenas1121

    Жыл бұрын

    @@tomburch7117 P0175 P0172.p0446

  • @ricardoayala2253
    @ricardoayala22534 жыл бұрын

    Thanks for sharing you expertise on head gasket issue. God bless

  • @alex250r7
    @alex250r74 жыл бұрын

    Dude, I LOVE the intro it brought me back to old school Need For Speed days!

  • @flip2724

    @flip2724

    3 жыл бұрын

    Haha

  • @MartinSage
    @MartinSage2 жыл бұрын

    Never seen a double stacked tester. Mine is a simple single one! Lots of good advice like test warm and give a little gas if you can’t detect at idle.

  • @rstyll
    @rstyll6 жыл бұрын

    Thank you. Great information.

  • @michaeldunagan8268
    @michaeldunagan82682 жыл бұрын

    Nice video. Would not a cracked cylinder head or a cylinder liner also be capable of allowing combustuon gasses to escape in ro the cooling system?

  • @bretholtzman1524
    @bretholtzman15245 жыл бұрын

    Thanks for sharing your knowledge.

  • @TheDerekeder
    @TheDerekeder4 жыл бұрын

    Excellent video! Thank you

  • @mikcar9423
    @mikcar94234 жыл бұрын

    straight to the point! right on!

  • @danojames8329
    @danojames83293 жыл бұрын

    Good to now bud what about burnt coolent smell is that head gasket failure to or just overheating problem

  • @celtic5yamum
    @celtic5yamum4 жыл бұрын

    Great video!! Thanks for sharing this with us. I've taken the xoolant exhaust test but found it took a really, really long time the the blue liquid to change green - like 7 or 10mins. When that happens, would you say that could be a crack in the head / block? Or perhaps an incorrectly positioned headgasket? (I.e. not flat cyl head or block mating surfaces)

  • @skip741x3

    @skip741x3

    2 жыл бұрын

    I had a similiar experience with it... initially stayed blue but i did get some green appearance if left on too long BUT what was happenning after extended periods was the coolant level Rose high enough to get sucked Into the tester and That colored the fluid at that point... so make sure thats Not the case.... the color change should show very quickly if its leaking gases...would not need 8 mins to determine

  • @Dougie33
    @Dougie33 Жыл бұрын

    Question, you said the only way combustion gas can get into the cooling system is for a failed head gasket.. would a cracked head or crack block also be able to allow combustion gas into the cooling system?

  • @marshallmathe548
    @marshallmathe5485 жыл бұрын

    on my 02 yoda cam with the standard 4cyl eng I have started to take notice of a burnt metal like smell from the exhaust. Any idea to what might cause this smell? I hate to think of the worse case such as a blown engine but.... I'm hoping my eng in not totally gone.. my teenager told me the engine over heated. I'm in the process of going over the engine with different steps via KZread vids

  • @BrandonHillCPA
    @BrandonHillCPA2 жыл бұрын

    Thanks for posting about the combustion leak tester. It is rarely mentioned in videos or in forums. Question: Do the leaks *always* go both ways, or only when there is a significant amount of damage to the head gasket? In other words, the most commonly mentioned indicators of head gasket leaks is coolant getting into the engine oil. While significant leaking can be fairly obvious, detecting leaks early can be more difficult because moisture coming from condensation (for example) can create milky coatings similar in appearance. I like that the combustion leak as a test since the gasses wouldn't come from other sources. However, before investing in such a tester, I'm curious if this symptom would be just as reliable to expect no matter how far along the damage is. In theory, it makes sense: in a closed recirculating system, if the fluid going into the engine doesn't continue out of the engine and escapes into the oil mixture, that gasses might instead be sucked into the intended path of the coolant on the other side of the leak. But I'm not a trained mechanic and many of us searching for answers here haven't broken down an engine block to understand the path that fluids and gasses take through one.

  • @hw5091

    @hw5091

    2 жыл бұрын

    In the very beginning it can be a little tricky sometimes. But there will typically be fluid going into the oil, just as there are gasses into the radiator. Usually from someone with a leak in the radiator system running it hot n then filling it with water, thinking they are then ok, only to find out later the head gasket is torn, or possibly even the head it self.

  • @skip741x3

    @skip741x3

    2 жыл бұрын

    the testers can be rented at most auto shops like autozone.. u need only purchase the fluid

  • @alespretor27
    @alespretor274 жыл бұрын

    Actually it's more often cracked head than blown head gasket. Initial sign, in my experience is when you see vapor-like smoke coming from the coolant exp.tank, when you start the engine. Everything is fine, temperature is ok, hoses are ok, pressure inside the cooling system is ok, just there is some smoke there and you can see very thin skim, barely visible, floating on the coolant surface in the exp.tank. Be 99% sure that there is a problem with the engine's head or even a block. It is easy test to perform when you wanna buy a used car. Start the engine with the cap off the exp.tank and watch with the flashlight pointed into coolant. If you see a smoke after 3-4 minutes coming out from there, moreover, if you see that tiny skim in there, be almost sure that you are buying a huge problem. Just get away from that car.

  • @ugenegareth9339

    @ugenegareth9339

    2 жыл бұрын

    2 Esdras 7:100

  • @mrpaytonsparks

    @mrpaytonsparks

    3 ай бұрын

    I've got a 2009 Dodge Grand caravan 3.3 I just changed the thermostat and rented a pressure test kit. I've been putting water in it there's no oil in coolant or vice versa but I am getting bubbles from the coolant reservoir. Does this mean mean bad head gasket?

  • @alespretor27

    @alespretor27

    3 ай бұрын

    @@mrpaytonsparks no oil in the coolant doesn't mean everything is fine. Bubbles mean there is "communication" between the combustion chamber and the cooling system, which further often means a cracked cylinder head or head gasket if you're lucky. If you have to use the car, at least don't tighten the exp.tank cap all the way, let the pressure escape the cooling system for it can damage all radiators including the cabin radiator, which is usually very difficult to replace.

  • @coachrob760
    @coachrob760 Жыл бұрын

    thanks for the treaching of this!!!

  • @valeriegeorge7535
    @valeriegeorge7535 Жыл бұрын

    If it's a head gasket would it still start but have lots of smoke white coming out the back? Asking because I have a Honda oddesy and the battery light came on and then it shut off and then I got jumped off and got around the mountain for it to die. Had it towed and they replaced the alternator and I go pick it up and it started and as I pulled out the parking lot , lots of white smoke in the back. So I did a uturn and back in their office . now I'm waiting to see what they say in the morning. He said it could be a head gasket and then later in the evening he said something about the PCV valves. Any advice ? If it was a broken or cracked head gasket would it still start up and drive ? He mentioned PCV valves saying that the way it was towed in might have got oil or something in it. I'm confused 😞

  • @frankrizzo3922
    @frankrizzo39224 жыл бұрын

    Well, i dont have bubbles but my radiator hoses get very hard right away after 1st startup... wont run but few mins till over heats.... soo guess I've got bad head or bad head gasket...brand new radiator to... 258 AMC 6 cylinder engine..sound right?? Probably so.

  • @ianwilds3139
    @ianwilds31395 жыл бұрын

    Great video man..I dig your straight to the point approach. This may sound like a dumb ? but does the combustion tester work with propylene glycol based coolant as well? My '98 Cutlass 3.1L is running great no overheating fuel trims near perfect at idle but LT goes +7 to 10 when I rev it then back down to normal at idle. I'm getting quite a bit of white smoke out the exhaust and p0420 code but I figure that is due to deleted cat. Any advice would be much appreciated.

  • @FlatRateMechanic

    @FlatRateMechanic

    5 жыл бұрын

    Not that out of the ordinary for the fuel trims the go + of idle. Hard to say

  • @howtowithelizabeth7513

    @howtowithelizabeth7513

    5 жыл бұрын

    Why not try it my guess would be yes since that liquid changed color when it detects exhaust gasses I don’t think the type of coolant would matter

  • @FlatRateMechanic

    @FlatRateMechanic

    5 жыл бұрын

    But yes a C0 tester will work with any coolant. It is testing for combustion gases exiting the cylinder into the coolant system, though the head gasket

  • @kingme6109
    @kingme61094 жыл бұрын

    Great Video

  • @johnnyace1954
    @johnnyace19542 жыл бұрын

    excellent video

  • @Bigjay88888
    @Bigjay888883 жыл бұрын

    I have a 99 regal white smoke out the tailpipe not overheating but resrvoir does bubble up

  • @mrg466
    @mrg4663 жыл бұрын

    I work a job, using my own vehicle, mostly just idling for 12 hours, for 3 days a week,... can this cause a blown head gasket? It's a 2003 Honda Odyssey. Thanks

  • @apexalphalabs6408
    @apexalphalabs64084 жыл бұрын

    Got a question regarding my 2008 Chrysler T&C with the 3.8L. Replaced all hoses and rad cap, brown sludgy stuff on the bottom of cap and inside radiator. Also a gritty substance in the overflow bottle. Oil looks clean, can’t check trans fluid, no overheating. Just a weird smell when running. It uses that yellow/orange coolant. I’m suspicious of a HG problem, but I’ve never had a Chrysler or used this coolant before. 127k on the odo.

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    we never got the beginning of the story. why did you replace the hoses and cap?

  • @maxs9383
    @maxs93832 жыл бұрын

    Great video, showed me some good things to look for when I was trying to get to the bottom of there being oil in my coolant reservoir. If anyone knows differently please correct me, but I think these tests only show you if your head gasket has a crack/hole/gap from cylinder to one of the coolant pipes in the engine. On my car since I have no exhaust gas in my coolant or pressure, I think I just have a small leak between one of the oil pipes in the engine and one of the coolant pipes. Again if my understanding is mistaken here I'd like to know more. Ran a compression test and that was on the good side of the acceptable range so pretty much confirmed no leak from cylinders to coolant. Still need to replace head gasket though and will replace other seals while I'm at it, but good to know that the problem isn't catastrophic.

  • @1_Bad_Z

    @1_Bad_Z

    2 жыл бұрын

    Exactly. This test works depending where the gasket gave out. If it's between the cylinders only, this test won't reveal that, other than not changing colors/ reaction. At that point you need a compression or leakdown test. Also look for codes. Between cylinders, it should give you a code. Based on what this video showed; bubbling on cold engine upon removing radiator cap. This is a good indication of faulty head gasket. At that point using this chemical test is the way to go.

  • @ScatManAust
    @ScatManAust3 жыл бұрын

    A neat little trick is to recycle the detection fluid by moving out to fresh air and keep pumping the bulb. The fluid turns blue again and can be reused. Not sure how many times you can do it, but I have reused it up to about 5 times or so with reliable results.

  • @MartinSage

    @MartinSage

    2 жыл бұрын

    Good trick!

  • @maxstafford4007

    @maxstafford4007

    2 жыл бұрын

    Fuck going to you to get a test....

  • @dannyduds1058
    @dannyduds10585 жыл бұрын

    Very informative

  • @sunnyflower1979
    @sunnyflower19792 жыл бұрын

    I have a van thats had the radiator cap, radiator hoses, radiator and thermostat replaced. One day itll overheat after driving 3 miles, the next day I can drive all day with no overheating. Im confused and have no idea whats wrong because it happens sporadically.

  • @jopisano67
    @jopisano674 жыл бұрын

    I did the radiator cold start up test. For the first few minutes of running the car , i did see a couple tiny bubbles appearing at the top now and then ( but not consistent ) I let it idle longer for another five minutes or so and the tiny bubbles i saw earlier stopped. 211,600 miles on a 95 Camry. My question is , what could have caused those tiny bubbles to appear at first then stop..

  • @codyramos3200

    @codyramos3200

    4 жыл бұрын

    i would guess small amount of air in system. if its a head gasket issue it will usually make the coolant level rise for a few moments bubbles come out an coolant level goes down a little to repeat itself , coolant reservoir will have a gunk stuck on the inside . oil cap might have a milkshake look underneath do to water vapor or after running car around the radiator hose will be rock hard, classic sweet smell from exhaust . continuous loss of coolant from the system needing to be topped off regularly . just a few things that are signs of trouble

  • @TheAlmir79
    @TheAlmir797 ай бұрын

    What it the coolant is rising with cold engine and the cap off but there's no bubbles

  • @martinhanley9524
    @martinhanley95244 жыл бұрын

    How much did the repair cost the customer ?

  • @eyeneedfood4344
    @eyeneedfood43444 жыл бұрын

    Great video straightforward

  • @scottdixon2697
    @scottdixon26974 жыл бұрын

    What if my radiator doesn't have a tab to open up, can I look in the coolant system and see if bubbles are forming there?

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    If your radiator doesn't have a cap that means that it would use a pressured exspantion bottle and yes you could look in there as well.

  • @detailkingz7922
    @detailkingz79224 жыл бұрын

    What if you have small little bubbles instead of big bubbles I have alot of little bubbles however I just rebuild the engine and just drove it home and starting noticing this

  • @michaelpaquette362
    @michaelpaquette3623 жыл бұрын

    I got same problem on m'y mini Cooper the liquid stay Blue is not head gasket in my case

  • @marie-joseeb.1997
    @marie-joseeb.19974 жыл бұрын

    Thank you for the video! I did the chemical test on my essence car and it turns dark green, but not yellow. Do you think it means there is carbone dioxide in my coolant system (and thus probably a blown head gasket)?

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    maybey the coolant is too old or broken down for the test to work.

  • @caseyangeletti6300
    @caseyangeletti63005 жыл бұрын

    Not one mention of possible cracked head or cylinder?

  • @jopisano67
    @jopisano674 жыл бұрын

    How long do you have to let the car idle at cold start to notice any bubbles ? I would assume just a few minutes ?

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    it can bubble any time it wants to through the warmup cycle and usually its not very noticeable unless you have a helper "power brake" it a bit.

  • @MrMartinez39

    @MrMartinez39

    3 жыл бұрын

    any time it will do it

  • @QthAgR8
    @QthAgR84 жыл бұрын

    I have a 2011 Ford Taurus sel. 100k miles. I checked my collant tank last night and it’s milk shake.i checked my oil it’s clean and look like regular oil. Can a tranny cooler line cause this or is fashore the engine cooler? Car doesn’t over heat or leak on the ground nor does the engine loose power.

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    If it's reddish in color it would be a bad tranny cooler if its more oily color it would be and oil color. Both of which are part of your radiator on that car if I'm not mistaken.

  • @Rio-by1eh
    @Rio-by1eh4 жыл бұрын

    Blown head gasket ...it means that the coolant is squeezing through the gasket seal into the oil in the overhead cam right...??

  • @aliciagallion3383

    @aliciagallion3383

    4 жыл бұрын

    not nessessarily they are several ways a head gasket can go not just mixing with oil 1 chamber to chamber 2 chamber to coolant jacket 3 chamber to oil jacket 4 coolant jacket to oil jacket and last but not least a cracked head

  • @kendigjl
    @kendigjl4 жыл бұрын

    Scotty Kilmer didn't mention checking the cold engine to see if the hoses are hard, and he didn't mention checking for bubbles. He jumped right to the test kit, and his Amazon link.

  • @bigskyberrys
    @bigskyberrys4 жыл бұрын

    Does the testing fluid work for testing a diesel for a blown head gasket?

  • @SolidSativa1

    @SolidSativa1

    4 жыл бұрын

    Yes it does, Diesel engines also generate carbon dioxide. that is what makes the fluid go yellow

  • @oliveb6318
    @oliveb63185 жыл бұрын

    0:16 if the white indicator is in the middle towards the 140, is it a bad sign?

  • @danielparks9035

    @danielparks9035

    5 жыл бұрын

    You mean the temperature gauge? Lower is better. If it rises much above halfway usually there is a problem. All the way to the right could mean engine damage and shutting the vehicle off is advised.

  • @cmorales6404

    @cmorales6404

    4 жыл бұрын

    but also if it doesn't move after the car has warmed up that either means your thermostat is no longer working and is stuck open or your coolant sensor is no longer working... also if your thermostat is stuck open there's a good chance your heat doesn't blow as hot as it usually does.. either way both of them are easy fixes very easy

  • @komaorion2048
    @komaorion2048 Жыл бұрын

    I have smoke that comes out alot on a cold start but when my car warms up it goes away it doesn't look normal

  • @doublej4077
    @doublej4077 Жыл бұрын

    Can a blown head gasket allow water to to go into your oil , indicated by the dipstick showing you got more oil than you need ?

  • @FlatRateMechanic

    @FlatRateMechanic

    Жыл бұрын

    Indeed

  • @TRICITYTRASHOUTS
    @TRICITYTRASHOUTS4 жыл бұрын

    1996 GMC Suburban 2500 SLT 7.4L - radiator and reservoir full of grey, thick sludge big-time.... Although the truck runs great, the two dipsticks are fine... Oil looks like oil, trans fluid looks like trans fluid.... Some say oil cooler is problem, I am STUMPED HERE iN PHOENIX ARIZONA... HELP.... Thx, JSW

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    Yes, I would agree, radiator should be replaced.

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    alot of times those have an oil cooler or heat exchanger that leaks oil into the coolant its probably that. time to dig deeper looks like.

  • @mrmike1096
    @mrmike10964 жыл бұрын

    Dose keeping water coolant lid lose stop pressure build up in head??

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    Yes, but your car will still overheat. The coolant will all boil over and out. Having the system under pressure increases the boiling point of the coolant. With the cap off your coolant would start boiling at normal engine temp.

  • @MrArtVendelay
    @MrArtVendelay5 жыл бұрын

    You determined the head gasket is bad based on the CO test but could it not have actually been a cracked head?

  • @hgpo27

    @hgpo27

    4 жыл бұрын

    It could be, but there is no way to differentiate the two without taking the head off

  • @jss6060
    @jss60604 жыл бұрын

    Mine passed all these tests except for white smoke coming out of the tailpipe and a sweet smell

  • @symbolsoffuture9293
    @symbolsoffuture92934 жыл бұрын

    Hi i got a toyota hiace 2006 version overheated and blown the gasket after reassembly it wont start . please advice

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    incorrect mechanic. replace mechanic and start over.

  • @bradlflores
    @bradlflores6 жыл бұрын

    cool graphic in the beginning

  • @rudymunoz901
    @rudymunoz9014 жыл бұрын

    How can you tell if it's a intake gasket leak from a head gasket leak? If the bubble symptoms are the same.

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    If the intake gasket is leaking you will typically see coolant on the ground or in the engine oil. intake gasket leak on its own will not cause an overheating problem until the coolant gets low. Headgasket can cause overheating even if the coolant is full.

  • @rudymunoz901

    @rudymunoz901

    4 жыл бұрын

    @@FlatRateMechanic It's not overheating and there is no visible coolant. What test can I do to make sure it's the intake. The reason I say this is because I was doing maintenance on the throttle body and I removed the plenum and I saw some moisture in it. Then I checked the sparkplugs and there was visible coolant burning on the spark plugs. This is on a 2000 Accord v6. Thanks a million for talking the time to answer. God bless.

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    @@rudymunoz901 I have work on many of those engines over the years and have never seen any intake gasket problems. Its not uncommon to build up some moisture in intake due to blow-by from the crankcase, if there are no other symptoms and car is not using coolant or overheating I would not be too concerned.

  • @rudymunoz901

    @rudymunoz901

    4 жыл бұрын

    @@FlatRateMechanic Well.. I have noticed some coolant loss in the reservoir before, it's minor, about a full reservoir in a month. And it does not give me 23mi on the gallon anymore. only 20mi on the gallon and I have Noticed Some power loss. I thought this was normal being such an old car and having 200kmi but after watching Your video and noticing the sparkplugs contaminated with burned coolant and not being able to get rid of the air in the radiator, it adds up. 🤔I was thinking I replaced the iac sensor about 3 months ago and reused the same gasket, can that leak in to the combustion chamber? I just want to discard any possibility before I commit to fixing half of an engine. Again thanks a million And God bless you.

  • @ChuckBryant

    @ChuckBryant

    4 жыл бұрын

    Does it matter? You have to replace all the gaskets to get to any of them. You can't reuse them after disassembly anyway

  • @cachasbanuelos5516
    @cachasbanuelos55164 жыл бұрын

    Did you recommend any head gasket sealer?

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    I would not recommend headgasket sealer. Can work as a bandaid in some cases but if you plan on keeping the car will only cause more problems down the road. Blocking coolant flow and plugged radiators. You will never be able to get that stuff out.

  • @artdude2823

    @artdude2823

    4 жыл бұрын

    @@FlatRateMechanic Bars fix a gasket repaired a 67 Fairlane.... Still running after 23 years!

  • @mxrodriguez22

    @mxrodriguez22

    4 жыл бұрын

    @@artdude2823 what's the name of the sealer you used ??

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    @@artdude2823 must not get driven much

  • @brandonorgan279

    @brandonorgan279

    4 жыл бұрын

    Blue Devil head gasket sealer is the best head gasket sealer you can buy and comes with a money-back guarantee

  • @adreyanmendez7081
    @adreyanmendez70814 жыл бұрын

    This was donee on a impala 3.4L if im correct, how long was the car able to run for before over heating? I have a 2004 Chevy Impala 3.4L that is over heating about 20 mins of running even after i replaced the thermostat, Bypassed heater(heater core doesnt work) replaced hoses, replaced the radiator cap, flushed the system and put new coolant in. I am not sure on how to properly bleed the system. Are you able to give me some advice ? The bottom of my oild lid isnt milkly and neither is my oil, i dont see any external leaks. When i shut the car off the resevoir starts filling up.

  • @richarddavis1763

    @richarddavis1763

    4 жыл бұрын

    water pump wit car idling pinch radiator hose if you dont feel any thing moving thru its probably wp

  • @johnnyawesome4167
    @johnnyawesome41672 жыл бұрын

    I have a 2019 Nissan Sentra and when I run for awhile it transfer's all the antifreeze from the radiator to the coolant is that normal

  • @MartinSage

    @MartinSage

    2 жыл бұрын

    What???

  • @nataliearcos4349
    @nataliearcos43494 жыл бұрын

    I wrecked my truck. And when i turned it on 3 weeks later it was smoking... Then it stoped smoking. But its smoking very little. Can that b the motor?

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    Really hard to say. Smoke can be caused by many things. Is it white, black or a blueish smoke?

  • @nataliearcos4349

    @nataliearcos4349

    4 жыл бұрын

    @@FlatRateMechanic its white smoke

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    White smoke would typically mean coolant if it has a sweet smell to it.

  • @nataliearcos4349

    @nataliearcos4349

    4 жыл бұрын

    @@FlatRateMechanic the oil has a gas smell

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    @@nataliearcos4349 raw fuel can cause white and smoke too. What kind of truck is it

  • @reginaldrodgers1060
    @reginaldrodgers10604 жыл бұрын

    No white smoke hoses not hard no leaks change water pump and Thermostat but still getting bubbles 2013 chev Malibu

  • @spacechipearth321
    @spacechipearth3214 жыл бұрын

    Those engines 3.4 have plastic intake gaskets that leak oil and coolant as well....

  • @stevejohnson1397

    @stevejohnson1397

    3 жыл бұрын

    BULLSHIT. That is the 3.8 L V6 made by Buick that has the plastic intake that one is aluminum and it's a piece of shit I wouldn't own a 3/4 or 3-1

  • @stevejohnson1397

    @stevejohnson1397

    3 жыл бұрын

    You are wrong 3.8 L V6 made by Buick has plastic intake that is aluminum biggest piece of shit GM ever built don't buy one

  • @828hype
    @828hype7 ай бұрын

    I feel like I’m going crazy. My car passed all these tests, yet I’m losing coolant with no drip. I also don’t have any overheating

  • @sigeptim1982

    @sigeptim1982

    5 ай бұрын

    Radiator cap?

  • @MohammedNomer
    @MohammedNomer4 жыл бұрын

    If the temperature alert light turns on does mean absolutely the engine is damaged ?!

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    not absolutely, just likely. have a good pro check it out to find out.

  • @daryldettmer9160
    @daryldettmer91604 жыл бұрын

    what if you oil isn't discolored or your not overheating but your losing oil from the engine

  • @zaybanks634

    @zaybanks634

    10 ай бұрын

    Oil leak

  • @briankeithnull194
    @briankeithnull1944 жыл бұрын

    I have unfortunately, a 2012 Jaguar XF Supercharged V8 Portfolio Edition. The car has a blown head gasket. Due to the aluminum block I'm also told it would most likely also be damaged. Mechanic said I would need to replace the engine. This would be at a cost of 8-10 thousand dollars. For a car with a value of $13,000 a total waste of money. I spent about $48 at Auto Zone for a bottle of Bars Head Gasket Sealer/Repair. The gasket was leaking into the cylinder and causing the car to run poorly and white smoke out of the driver's side tailpipe. After driving the car with the Bars in it the check engine light went out the engine is running correctly and there is no longer smoke from the tail pipe and no longer leaking engine coolant. Before you replace the head gasket try the Bars especially if like me your going to get rid of the car ASAP! Worked for me, it's supposed to last. Good luck!

  • @bigmac22ify

    @bigmac22ify

    4 жыл бұрын

    Hurry and trade the car in that stuff buys you a couple months probably it's not a permanent fix

  • @anthonyyoung7344
    @anthonyyoung73444 жыл бұрын

    I have a 94 Ford ranger with the 3.0 v6 Everytime you drive it it will push the coolant to the overflow tank but don't pull back to radiator I can't figure it out it's driving me nuts.

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    Bad radiator cap my freind. Not much else that can cause that.

  • @anthonyyoung7344

    @anthonyyoung7344

    4 жыл бұрын

    @@FlatRateMechanic I thought the same thing so I put a new one on still dose the same thing.

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    @@anthonyyoung7344 Is it overheating? it's possible that the cap does not seal internally for some reason. Expesily if the radiator has been replace at one point in the truck's life "aftermarket radiator" If it's not overheating Maybe try different brand cap. Or in very rare cases head gasket can be leaking combustion gas into coolant with no overheating symptoms. The extra combustion gas affects the pressure and siphoning effect that takes place.

  • @anthonyyoung7344

    @anthonyyoung7344

    4 жыл бұрын

    @@FlatRateMechanic yeah I put a new factory replacement radiator and cap on the truck it doesn't get hot just pushes the coolant from the radiator to the overflow tank.

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    @@anthonyyoung7344 Very interesting. I would still try a second cap if you haven't already. If so then I'm afraid it must have a start of a head gasket problem. I would like to know what you find if it is something else. Keep us posted. Thanks. It would need to have some kind of leak, whether it be air or coolant. From the sounds of it, it is air. causing the system not to hold vac as is cooling off and retracts, which is what pulls the coolant back in from the overflow.

  • @CarlosTorres_19
    @CarlosTorres_194 жыл бұрын

    My 89 Sierra blows white smoke when I rev it how could I fix that

  • @bonecrusher1777

    @bonecrusher1777

    4 жыл бұрын

    Blowing white smoke indicates an Oil Leak if I remember correctly. Fix the leak wherever it is and your problem should go away

  • @gerhardlourens7930
    @gerhardlourens79304 жыл бұрын

    If it's blown you will have water in your oil. your dipstick will have a frothy oil on it, will look like espresso froth. Drain your sump when the engine is cold. you can drain the water in the bottom sitting below the oil. The engine will actually still work fine with over a litre of water in your sump.

  • @codyramos3200

    @codyramos3200

    4 жыл бұрын

    thats not true you can have a bad head gasket an not have milkshake oil just like having milkshake oil doesnt mean head gasket failure 100% of the time. it depends on where the gasket failed

  • @gerhardlourens7930

    @gerhardlourens7930

    4 жыл бұрын

    @@codyramos3200 There is only one place the oil and water can mix, that is at the head gasket.

  • @codyramos3200

    @codyramos3200

    4 жыл бұрын

    @@gerhardlourens7930 , again not true it can happen with a bad intake manifold gasket , oil cooler failure or at a oil cooler adapter like fords have where the oil filter is . head gasket is just 1 possibility out of a few for water n oil to contaminate each other

  • @1_Bad_Z

    @1_Bad_Z

    2 жыл бұрын

    @@gerhardlourens7930 As Cody said, depends where the gasket failed. If it was from piston oil area to coolant area/passage, yes. If it's only between pistons, you also have a failed gasket, but since oil hasn't mixed with coolant, you won't get that milky foam effect. That's why there are multiple ways to test for bad head gaskets.

  • @enigmareach1129
    @enigmareach11294 жыл бұрын

    Cars 40 years ago and the job is easy. 2019 junk it.

  • @NjoyMoney
    @NjoyMoney3 жыл бұрын

    Question, wouldnt you be able to hear its not running on all cylinders (blown headgasket) by simply cranking it? The cranking sound changes when a cylinder doesnt have compression

  • @MartinSage

    @MartinSage

    2 жыл бұрын

    Nope, mine runs great except bubbling and getting hot when not moving. Just got the kit to test combustion leak

  • @NjoyMoney

    @NjoyMoney

    2 жыл бұрын

    @@MartinSage yes it depends on the size of the leak

  • @proxygaming3182
    @proxygaming31823 жыл бұрын

    Please help, 2019 mustang ecoboost 20k miles, Car runs fine, Little rough on startup, No bubbles in radiator Cylinder 4 misfire, No milky sludge on oil cap Does not overheat and there's a clear coolant leak under the reservoir and white smoke, Started out of nowhere last night after driving the car and It was sitting for a while went to start it up and got a shit ton of white smoke

  • @mikemaben7485
    @mikemaben7485 Жыл бұрын

    So u don't want to open radiator when motor is hot ? Oh shit I've been doing that tY

  • @peggyrobertson5132
    @peggyrobertson51324 жыл бұрын

    If u have a blown head gasket does it over heat ?

  • @mrjim69my

    @mrjim69my

    4 жыл бұрын

    Yes

  • @mrjim69my

    @mrjim69my

    4 жыл бұрын

    Yes

  • @mxrodriguez22

    @mxrodriguez22

    4 жыл бұрын

    Duh

  • @r.l.strange1897

    @r.l.strange1897

    4 жыл бұрын

    If you watched the video or googled one time you would know, fuckin tool

  • @JohnDoe-mp1zk

    @JohnDoe-mp1zk

    4 жыл бұрын

    R.L. Strange if yo watched or googled how people learn you wild know that everyone is different dumbass. Just because your knowledge is more than that if the person doesn’t mean there stupid.

  • @jordandeej
    @jordandeej4 жыл бұрын

    What does it mean if all the coolant leaks out

  • @mikenojones6861

    @mikenojones6861

    4 жыл бұрын

    You have a leak somewhere

  • @jakobnewman8242

    @jakobnewman8242

    4 жыл бұрын

    Possibly a bad thermostat or heater core if coolant leaks into the floor/carpet in the car

  • @belenreyes7255
    @belenreyes72554 жыл бұрын

    I don't have bubbles but don't have pressure

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    Pressure is normal on a hot engine. Not on a cold on.

  • @T16MGJ
    @T16MGJ2 жыл бұрын

    Cylinder Head Gaskets rarely FAIL! Invariably they are first damaged and then no longer can do the job they were designed for. Worn out Water Pumps a prime cause of coolant loss although there are many other reasons for coolant loss. When coolant loss reaches critical low level engine overheats. Excess heat damages engine components and one of the first to be damaged is the poor old Cylinder Head Gasket. Many modern car uses have little under the bonnet understanding, Clueless. I have known car users drive on when clearly something is wrong and not only is the CHG damaged, but the Plastic Inlet Manifolds have actually melted from excess heat and soon after the car grinds to a halt with a seized solid engine. Have rescued two work colleagues' cars suffering that demise. So check the condition and the level of the coolant on your car. As well as other checks recommended by ALL automotive manufacturers. There are many valid reasons for doing that, including serious safety issues. It aint Rocket Science.

  • @ExploringCabinsandMines
    @ExploringCabinsandMines4 жыл бұрын

    he said "sucking apparatus " lol

  • @timothyfoeks6446
    @timothyfoeks64463 жыл бұрын

    I used to own a 1994 Ford Ranger with a 3.0l v6 and the head gaskets took a shit in that truck my engine oil was like a milkshake !!!! 😠😠😠😠

  • @shakeen583
    @shakeen5834 жыл бұрын

    My car isn't running hot but my top hose has to much pressure on it

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    when? after its cold?

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    If there is pressure on a cold engine you definitely got a problem. Nermal for a hot engine.

  • @shakeen583

    @shakeen583

    4 жыл бұрын

    @@FlatRateMechanic when it warms up the radiator hose gets tight

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    @@shakeen583 normal

  • @gavesilas3178
    @gavesilas31783 жыл бұрын

    What if car won't start

  • @maniacalmonster2293
    @maniacalmonster22932 жыл бұрын

    The bubbles coming from the radiator cap could just mean air is escaping. that's how you burp the system, to get the air out. It could just be air.

  • @annenielsen5680
    @annenielsen56803 жыл бұрын

    Atomatic blowing black smoke at top gear

  • @Labergemusic
    @Labergemusic6 жыл бұрын

    Good video, but next time you're about to shoot footage, take a bit more time to think about where and how the camera should be pointed. Quality information and just a bit more camera practice and you'll be getting loads of viewers!

  • @FlatRateMechanic

    @FlatRateMechanic

    6 жыл бұрын

    Thanks a lot man. Appreciate the feed back!

  • @JohnDoe-mp1zk

    @JohnDoe-mp1zk

    4 жыл бұрын

    I don’t think it will change viewers but maybe like and dislikes. People looking Up this info are trying to absorb as much as possible.

  • @shamrunner1856

    @shamrunner1856

    4 жыл бұрын

    @@JohnDoe-mp1zk nice

  • @ahoorakia
    @ahoorakia4 жыл бұрын

    if it is gm 3.1/3.4/3.8 and original plastic head gasket ,you just change it,they last between 50K to 70K miles if you are lucky,the knew it and never recalled it,and no the problem is not dex cool orange coolant

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    wrong gasket buddy

  • @JuanMorales-ks4ll
    @JuanMorales-ks4ll2 жыл бұрын

    the only think i can think is head gasket is a huge scam is a nightmare for a car owner to deal with this small issue but really expensive repair this gasket should be strang enough to never be replace it

  • @keithangstadt4950

    @keithangstadt4950

    Жыл бұрын

    Often times the problem isn't the gasket itself, but too much heat causing the cylinder head or block to warp, and then the gasket can't do what it is designed to do.

  • @rickeymoreno5442
    @rickeymoreno54425 жыл бұрын

    And to think all this time I checked the dipstick to see if the oil is milky I'm such a dumbass

  • @rdc7622
    @rdc76223 жыл бұрын

    Can't you just look at the dipstick to see if there's water in the oil?

  • @spandon

    @spandon

    3 жыл бұрын

    That will tell you if the leak is from the coolant ways into the oilways. If the leak is only from the coolant ways into the combustion chambers then that won't affect the oil in any way, so no.

  • @MartinSage

    @MartinSage

    2 жыл бұрын

    Not always, my oil is clean but bubbles in radiator

  • @xaviercamacho7888
    @xaviercamacho78884 жыл бұрын

    Thats koo man I lile that they made the tester like that

  • @FlatRateMechanic

    @FlatRateMechanic

    4 жыл бұрын

    Awesome, glad video helped out!

  • @OffGridInvestor
    @OffGridInvestor4 жыл бұрын

    Exhaust test against a blue car didn't exactly help your case. Until you zoomed in there.....

  • @jeffnations6649
    @jeffnations66494 жыл бұрын

    Blown head gasket or not. All vehices can create bubbles, even new vehicles! Duh..

  • @snippits75

    @snippits75

    4 жыл бұрын

    He did say he was doing the CO test to see if it was just air bubbles or combustion gasses causing the bubbles.

  • @pepperday100

    @pepperday100

    4 жыл бұрын

    Let's see if you can do a better video Jeff nations you prick

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    thats why good mechanics are worth money. they can tell the difference

  • @foamulator
    @foamulator4 жыл бұрын

    Testing for Carbon Monoxide at the exhaust pipe???? Funny

  • @codyramos3200

    @codyramos3200

    4 жыл бұрын

    guy wasnt testing the exhaust he was doing that to show what the blue fluid in tester is reacting with

  • @garonburwell9008

    @garonburwell9008

    4 жыл бұрын

    thats an old trick too use the sniffer form the gas analyzer in the area of the radiator filler neck to pick up co or hc or co2

  • @bigdfig6083

    @bigdfig6083

    3 ай бұрын

    @6:30 he states for anyone doubting the test kit then shows testing of the fluid to confirm it's legit n not past the expiration date 8]

  • @deathmetalmachine
    @deathmetalmachine4 жыл бұрын

    That's why I love about Chevys you can blow the head gaskets and they still run until they overheat again lol

  • @MoparMadness93

    @MoparMadness93

    4 жыл бұрын

    Literally any car can do that. Just depends on how bad it’s popped.

  • @r.l.strange1897

    @r.l.strange1897

    4 жыл бұрын

    slamdeathgrindmachine I love piles of shit too, but I won’t roll in it

  • @25BEDFORD
    @25BEDFORD4 жыл бұрын

    Buy a used Pontiac and you will know right away.

  • @willguzman9977
    @willguzman99774 жыл бұрын

    But at first u said it was the water pump...which is it?

  • @LeemWills

    @LeemWills

    4 жыл бұрын

    He's telling u basically the water pumped failed which caused the engine to overheat thus warping the cylinder heads that's why it's a blown head gasket

  • @briancossey9724
    @briancossey97243 жыл бұрын

    Who has rusty shit in their radiator

  • @keithangstadt4950

    @keithangstadt4950

    Жыл бұрын

    I thought that was the orange Dex Cool coolant that GM vehicles use.

  • @r.l.strange1897
    @r.l.strange18974 жыл бұрын

    Chevy cars are such shit now

  • @conanthebarbarian1971
    @conanthebarbarian1971 Жыл бұрын

    My 99 cavalier has combustion gas coming through the overflow tank, when You rev the engine, the engine runs fine tho, you can smell the combustion gas.

Келесі