⬇️ Things used in this video: 1. CRC Mass Air Flow Cleaner: amzn.to/2KqijPs 2. Common Sense 3. 4k Camera: amzn.to/2HkjavH 4. Camera Microphone: amzn.to/2Evn167 5. Camera Tripod: amzn.to/2Jwog8S 6. My computer for editing / uploading: amzn.to/2uUZ3lo ⬇️ Scotty’s Top DIY Tools: 1. Bluetooth Scan Tool: amzn.to/2nfvmaD 2. Cheap Scan Tool: amzn.to/2D8Tvae 3. Basic Mechanic Tool Set: amzn.to/2tEr6Ce 4. Professional Socket Set: amzn.to/2Bzmccg 5. Ratcheting Wrench Set: amzn.to/2BQjj8A 6. No Charging Required Car Jump Starter: amzn.to/2CthnUU 7. Battery Pack Car Jump Starter: amzn.to/2nrc6qR 🛠Check out the tools I use and highly recommend ► goo.gl/rwYt2y 🔥Scotty Shirts and Merch ► goo.gl/pTAeca Subscribe and hit the notification bell! ► goo.gl/CFismN Scotty on Social: Facebook ► facebook.com/scottymechanic/ Instagram ► instagram.com/scotty_the_mechanic/ Twitter ► twitter.com/Scottymechanic?lang=en

@DANNYN224

5 жыл бұрын

I knew it was the mass air flow sensor

@ethanvink1710

5 жыл бұрын

Thx Scotty! This may have helped me, my car needs a new starter soon and idles rough but never stalls... Would that be the mass airflow sensor or the O2 sensor?

@humbertorubi4947

5 жыл бұрын

Scotty great video as usual. Here is the thing. I have similar problem with my ‘02 Mitsubishi Montero 3,5 v6. I have replaced several sensors and changed almos all lines of vacuum and still have some troubles at low speed in load conditions. I have a lot of suspects on the MAF sensor so I got a can of CRC MAF cleaner but the can says it is not good for Karman Vortex MAF Sensor as used on Lexus and some Mitsubishi’s. According to the design it looks like mine is a KV MAF so I’m hesitating about use the product or not. I searched for any specific for KV sensors but it looks like there is nothing specific for them. What you think?? Thanks in advance!! Keep up the good job!!!

@shannonsmith5421

5 жыл бұрын

Lol @Common sense

@northernlights1855

5 жыл бұрын

@@ethanvink1710 did you plug a scanner in? Spark plugs or faulty coil. Always clean the mass air flow sensor.

👉🏼Hey Scotty....Can you let me know when your next door neighbor's house is up for sale?

@youtuberbayleexiong908

2 жыл бұрын

Lmao

@raheemwoods6513

2 жыл бұрын

Ikr lol

@joelle3258

2 жыл бұрын

I wish Scotty was my mechanic 🥲

@ckgbetormenyo9847

2 жыл бұрын

Hahaha

@cjyt6491

2 жыл бұрын

😂😂😂I hear that🙏🙌

Scotty, if all car mechanics were as honest as you are, there would be world peace !

@antoninsebera152

Жыл бұрын

At least there would be 80% lower cost of cars maintenance.

@christemple1495

2 ай бұрын

Unfortunately there is no such thing as a honest one in the real world.

Scotty has taught me everything I know about vehicles. I appreciate him.

@lawnside82

2 жыл бұрын

i wonder if any one caught the fact he broke the clip on that maf sensor... then jump cut it out....

@mistyestrada6123

2 жыл бұрын

Hes thought me everything I know too.(about cars) lol

@aw9536

2 жыл бұрын

Same here buddy

@trevorstaniforth6670

2 жыл бұрын

what happens if i disconnect maf sensor

You are my favorite go-to for vehicle information. Thank you for bestowing knowledge upon the general public of do-it-yourselfers. You're the best Scotty!

Scotty you’re like the crazy smart mechanic uncle I never had! Thanks for sharing your decades of knowledge and wisdom with us dummies. I learn so much from your videos.

@Crossbuzzin420

Жыл бұрын

I’d buy a vhs collection of all Scotty’s videos

You are a real person Scotty. You're a master of your trade and seems you still have passion for what you do. You genuinely help people out of the kindness of your heart and you're not a mindless automaton. I wish there were more people like you Scotty, the world would be a better place. Keep on keeping on!

@dicktaylor2600

5 жыл бұрын

P codes are a doddle,my dog could fix them ,put him on something like a 2 year old car with c and u codes,his head would melt.

@beatrizviacava-goulet7640

2 жыл бұрын

the new cars ...are a rip off in gnal to start the deceptions not even their own can't fix it ...like Chrysler their own mechanics have admitted it ...

@NASCARCUP22FAN

4 ай бұрын

​@@dicktaylor2600 Not what he does. Would be like telling you "Put him in a space shuttle fix and he would be lost"

@seanhyland6586

Ай бұрын

He's made $24 million off this KZread channel!!

Scotty you’re a living legend. Love your passion, it’s contagious.

This guy has taught me everything about cars !! Thank you!!! This guy need his own shop, we need more mechanics like him!!

@beatrizviacava-goulet7640

2 жыл бұрын

his own schools real learning schools will be nice ...

I'm so glad I found your channel! You give honest advice that we need. Thank you Scotty.

Love your work and passion mr Scotty. Thanks for always looking out for regular people.

@alfonsocarnero3943

5 жыл бұрын

Yeah Scotty is amazing

@fmalik7736

5 жыл бұрын

Scotty you are a honest mechanic as others can rip you off and will change lot of parts for this problem

@christippin6244

5 жыл бұрын

Love this guy his whole attitude is professional awesome

@thorjohnson3421

4 жыл бұрын

Tim Brown I’m with you Tim. Looking out for the regular guys.

@kevinjustice9501

4 жыл бұрын

@@fmalik7736 00

Scotty thank you for all the great videos ! You have pulled me out of so many binds and saved me a ton of money and make me laugh all the time !

wow after 4 years of driving with the traction control and abs codes that 3 shops couldnt fix, this fixed the problem! Scotty is the man and a friggin legend, thank you!

This is how I got my 07 Accord through emissions last month. Scotty saved me $$$

I absolutely love this mechanic. This man understands how a car ticks just by common sense. Use to employee a man like Scotty until he moved out of state. Sure miss JW. I sure LEARNED a lot from that man but still couldn't hold a candle to his wealth of knowledge. I'm 61, been a used car dealer for 35 years and still love a mechanical challenge.

@jameslee7881

Жыл бұрын

Does a 2012 corolla have ten year coolant in it

@1717ShapelessMercy

Жыл бұрын

@@jameslee7881 says who?hahaha 😂

@wolfhaddock8211

Күн бұрын

He is the man

I have watched several of your videos on various issues with cars. I used to own an old (2001) Hyundai Sonata....I know, but it's what I could afford at the time! But with your help I kept it running & was able to sell it! I have to say Thank You Scotty Kilmer. You saved me thousands of dollars by sharing your knowledge. I live close to Houston, so don't be alarmed if I ever show up at your shop & ask to shake your hand. You are a true mechanic of the people. You shall always have my respect & gratitude. Keep on doing what you do....we commoners need people like you.

Scotty, You are a National Treasure. Merry Christmas!

I bet there are quite a few mechanincs that would charge for the traction controll fix as well.

@winchester94

5 жыл бұрын

Charge and not do any work

@iamteamBB

5 жыл бұрын

or replace something else that didnt need the work done. happened to me once, i asked to see the old item "oh he threw it away already".

@Chu3505

5 жыл бұрын

Ha,ha..He didn’t fixed any.He just take out the mass air flow sensor and clean it.Waited about half an hour and putting it back.Than every went back to normal after he road tested it at 60 miles an hour driving testing.

@imasoccergenius

5 жыл бұрын

Chi Chu Scotty successfully identified the problem, its source, and addressed it. By definition he fixed what was wrong with the car.

@living-wellon-less5669

5 жыл бұрын

@@imasoccergenius There's a language barrier ole Chi Chu hasn't gotten over yet, but he managed to get over the border!

When you combine technology with experience, something magic happens!

@billyboy4797

4 жыл бұрын

its good having Scotty around

My type of no nonsense mechanic! Love you Scotty!

This guy is a blessing to all non automotive savvy car owners...God bless you Sir...

Your customers are Bless to have you😁. Great work man😎👌🏿

I love the simplicity & style. Very easy to follow & understand! Truly your experience precedes you! Thank you scotty for always been true!

Excellent video, good informative content is hard to find and everything you have is great help. Thanks Scotty!! You’re the best!!

Scotty the man, i really like this man

And this is why Scotty has 2.1M subs! I love learning your thought process too, thanks man!

Scotty, you are the best! Your advice has saved me literally thousands of dollars over the 6 years I have owned my used 1999 Chevy prism, it will be hitting 200k miles this year! Thanks a lot! I have a request: could you compile a list/video of DIY car maintenance that is ordered based on importance for vehicle longevity? Also the list/video could include how often each maintenance item should be done? Thanks again!

@OSOKCyber

10 ай бұрын

Great idea I would like that as well

Gosh I wish I had u in my 20's when seriously wanted to study mechanics ....and I thought...these mechanics don't know nothing now I found u and it makes all perfect sense to me...👍☺ finally pure knowledge!

My mechanic Dad that I never had. Thanks Scotty for everything.

Congratulations on 2M subs, best to you in the future scotty!

"Let's put this stupid beauty cover back on" lol You're the man Scotty!

@olmansabillon5823

3 жыл бұрын

😂

@wolfhaddock8211

Күн бұрын

I call that cover the engine girdle

Ive got that same scan tool. Wish i knew how to use it as well as you. Another great video ❤

I watch this guys videos and these things aren't even wrong with my car, I love his attitude and know how so much! He explains everything in a way I can understand and enjoy!! Thanks Scotty, you rock!

@williamtucker7349

3 жыл бұрын

I very learned so much about stuff even stuff that wasn't even wrong thanks scotty

One of your best videos! I’ve always cleaned MAFs as part of routine maintenance on all of my vehicles!

Thank you for your great idea!! It will help many drivers and car owner to maintain their car in a cheapest and effective way.

Learned something new today ! Love the videos !

Love these new videos of you doing actual work on random, real-world problems. As an example, you've previously told us about the MAF cleaner in one of your older videos, but now we see you actually using the stuff. It's little things like this that help the new people to mechanics.

Scotty you always come in clutch. I think you just helped me with my mom’s GX 460!

Love these videos , just the facts ,no filler, all killer keep it up Scotty

I hope a simple THANK YOU will do Mr Scotty!!!

I discovered this cleaner before finding your video. I can confirm it made a HUGE difference in our 1992 Pathfinder; cleaning the MAF even resolved the dreaded "Nissan engine surge".

I totally agree with that last part about getting your car inspected ASAP. The CEL may be gone today, but it can come back quickly. It's better if you've already passed inspection when that happens.

Thanks Scotty. It was ready helpful. Cheers

This is something I've been missing lately. Amazing job Scotty! Thank you for this video.

@Jinny-Wa

5 жыл бұрын

Me too. Sadly videos like these are rare nowadays

Scotty what a great service you do for all of us DIYers, thank you!

@rudyr3550

2 жыл бұрын

Yes...

@davidweum

Жыл бұрын

I was always intimidated by ANYTHING mechanical. Since I found Scotty and others on KZread, I've become a fearless DIY'ER. Having said that, however, I recognize my limitations.

@LykeArgy

4 ай бұрын

nah, there are no limitations, gearbox rebuild? easy, enginge rebuild? easy peasy, just like changing oil and filter@@davidweum

Thank you so much for the informative information ! Your the best

Right on Scotty. I practice this and saves good money. Rev upppp yourrrr engine !

Great video Scotty. I have about 20 cars in our work fleet that I oversee, and I appreciate these little tips so I can do what I can and only send them to the garage when I have to. (the contractor we use is a great man though, just he has so much he's doing already when I can do it myself I always try. ) Helps me save the big stuff for him and I can tackle more if the small stuff 👍

@enigma9971

2 жыл бұрын

He takes care of the big stuff and you the little stuff, huh? Hahaha

I really loved this video, Scotty! You showed us exactly what to do! You’re a fantastic teacher!!!! Thank you from the entire world!!!!

Thank you Scotty I am on it been through battery, alternator...plugs, have not tried this ..I am on it.... thanks again.😊😅

Thk you Scotty for all your help. Peace brother 😎🙏🏼

The MAS Sensor in a lot of European made 4 cyl cars can also effect the auto transmission causing it to not shift down when accelerating or starting off. As a result, lots of these cars end up at the Wrecking Yards as owners think the transmission is worn out. A clean MAS also makes a big difference in Toyota V6 & 4 cyl engines. Great instructional video Scotty, this should help a lot of people. Thank you. 👍🇦🇺.

@Veery_live

Ай бұрын

It's not Mas sensor it's maf sensor

Your knowledge of cars is amazing Scotty!

You are an encyclopedia of experience. I love your videos. Certainly worth watching.

Seems to me that even though it's an annoyance to disable the other systems, it could be a good idea, as it helps protect those systems from damage if the underlying issue isn't resolved quickly.

Anyone in GA know a mechanic like Scotty? Jeez his work is amazing

@paystyles5429

5 жыл бұрын

Rare breed

@ismaelnunez7736

4 жыл бұрын

hola my nombre es ismael me.podrian decir cuantos soportes yeva el toyota camry 2002

We were given a price of $500 for a similar fix on a Lincoln towncar 1998. DIY will pay for the reader! Thx!

@leadnsteel1428

5 жыл бұрын

It's crazy how much they charge. I have a diesel with 2 small fuel filters underneath my truck... Dealer wants like 140.00 for the filters, 300.00 for changing them. I bought the filters online for 1/3 and changed them myself for free.

@adamc8409

5 жыл бұрын

Yea the dealership wanted 500 for replacement of the maf so i did it myself in minutes i was like how is this 500 bucks of labor lmao

@lawnmowermanTX

5 жыл бұрын

I have a 1990 Buick LeSabre Limited with OBD-I and learned the transmission system cooks the fluid! My half brother got me this and a 2002 Explorer.. A nasty storm contributed to wrecking the Explorer, as I want to time travel to stop myself from driving home and power napping! The Buick ran great, till I put Seafoam in the tank, then the transmission fluid was foaming!

@lawnmowermanTX

5 жыл бұрын

Dealers screw us anyways and I don’t trust them. I need to find a used 3.3 liter inline 6 for a vintage 1982 Ford Granada or a used 3.8 liter V6, or used 302 v8.

@leadnsteel1428

5 жыл бұрын

@@cainhager9814 I bought oem AC Delco filters. 1/3 the price online vs dealeship

I wanna see Scotty team up for a guest build with the kids doing auction rebuilds. In his format... that would be gold!

Scotty sir you are the best I’ve learned so much watching your videos , thank you!

Thanks for sharing your knowledge Scotty . I always watch all you videos 😎

My Yaris was also hesitating, first thing I did was to clean the MAF sensor and voila! No more hesitation.

@nazu5998

5 жыл бұрын

My 1 litre Yaris is going strong touch wood :)

@edsanchez9198

5 жыл бұрын

Did you had the check engine light on when it was hesitating?

@Auriam

5 жыл бұрын

I got to try that on my little 2004 Echo.

@mikemorales1725

5 жыл бұрын

nope@@edsanchez9198

@yogie6543

5 жыл бұрын

If the MAF was dirty you may wanna clean the throttle body. At least the throttle plate. More junk on plate = less air flow = improper ratio causing issues.

This man is awesome..Genius and smart ..i am learning a lot from you sir and i love your videos.. please keep up the good work and i wish all the best for you .

I cleaned my MAP & MAF sensors and the next day i blew my charge pipe. So cleaning these sensors definitely helps engine performance its not a myth. Plus this genius of a man recommended it so you know it has to work. I LEARNED ALOT FROM YOUR CHANNEL WHICH HELPED ME IMMENSELY... THANK YOU SCOTTY......

Well done Scotty, we need you here in Australia. Cheers👍🏻

@louiseblackwell7351

4 жыл бұрын

Franc Furian carmen

now, if i could only find a mechanic that will fix it honestly like Scotty did, instead of charging me $1800 for all the stuff that wasn't wrong with it.

@headers12

5 жыл бұрын

@Barney and also finding a competent mechanic like Scotty as well. Because a lot of people in the industry who call themselves “mechanics”, are actually just glorified parts changer. They’ll just change a part instead of actually troubleshooting it.

@purcelllash7177

5 жыл бұрын

When I realized I wasn't able to afford a mechanic I started picking up some of those mechanic books at auto zone back then they were reasonable $3-6 now they're $30 or more

@Anna-tc6rz

5 жыл бұрын

@@headers12 I've found the best way is to find someone who is certified but working either in a small shop or alone. The chain shops are the ones I've had the most problems trying to scam me

@alfatech8741

5 жыл бұрын

Buy your own scan tool, research the codes online and fix it yourself

@edgarm8763

5 жыл бұрын

Barney is scary to think that most mechanics will rip you off like that

I really enjoy this type of video Mr Kilmer. Very informative, I might go and clean my MAF sensor as preventative maintenance.

Scotty you are definitely a chingon, thank you for everything.

The MAF sensor spray is exactly the same as brake cleaner and besides a MAF sensor is only made up of one schottky diode and one zener diode. So you'll be okay using brake cleaner. P.s; you're better off just replacing your diodes as they cost 0.002 of a cent each, plus they just push in ( no soldering needed). You can download the data sheet for your MAF sensor to find out what the correct impedance levels and ESR your MAF sensor requires. Honestly it's not as hard as it sounds and is very rewarding when you save a lot of pennies.

Good mechanics remind me of good chefs because they are both kind of nutty, and you are no exception. I am subscribing.

This guy is so cool man...Great mechanic, Great videos.

i wish there were more scotty’s because of him we know cars better how they work ,,,,thank you scotty.. salut..Kurdish boy living in the Netherlands.👍👍👍😎😎

I love Scotty’s videos, the absolute best! 🙌🏼

I had cylinder misfires the same month I had to get the emissions test. Went to the mechanic and he wanted to do an $800 tune up! I didn't think I wanted to keep the car, but took a gamble and added some fuel injector cleaner to a tank of gas and cleared the check engine light. Drove it gently for a couple days to work the fluid through and then drove normally. NO MISFIRES, no codes, passed emissions. That was almost 2 years ago...kept the car :)

@jmata383

5 жыл бұрын

Aye man Nice stuff! I bet it felt good too!

@deadgametech6624

5 жыл бұрын

use seafoam, nothing works better

@Anna-tc6rz

5 жыл бұрын

I always run one through when I get a car. Then every oil change as a tune up. My favorite is gumout or Chevron techron

@JaylenBieber

5 жыл бұрын

Cool. which injector cleaner brand was it? I heard Lucas is good.

@tastymacification

5 жыл бұрын

Remember to record your freeze frame data before clearing the codes. You might erase valuable troubleshooting data!

Scotty being truth and honest ever

Super, simple et efficace ! Merci l'artiste.

I need to find a mechanic as honest, thorough and knowledgeable as you in Sydney.

You would be amazed just how much of a problem a mass air flow sensor can cause, thanks for the tip scotty keep being honest because your stocks on respect will rise steadily!!😎👍

Been awhile since I watched in a video...the amount of views you have now is insane. Congratulations for real

Love your channel. Just found it today and you already saved me time, trouble, and money. I subscribed.

Most useful and entertaining channel by far! Scotty is a world treasure!

Scotty is awesome! King of the mechanics!

It is amazing how much knowledge it takes to fix these cars correctly. It really requires a lot of intelligence and experience and the skill of a detective.

@kkmart43

4 жыл бұрын

Yeah and people want to whine when we give them the bill because you know all you have to do is you tube it and do it yourself for free....lol......good luck with that and then they find out oh it's not so easy.

@amaxlite

4 жыл бұрын

@@kkmart43 mechanics generally charge way too much for repair especially if you take it into a shop(b/c of overhead costs) / I don't mind paying a reasonable rate which I usually get through mobile mechanics

@tragiclife9760

4 жыл бұрын

Kaunus88. Thank you from all mechanics, ppl call us grease monkeys and much worse think we rip EVERYBODY off and generally look down thier noses at us ahhh,but when the car won't go ,,well,you know , thanks again

@tragiclife9760

4 жыл бұрын

@@amaxlite what's to much? do you have any idea what it takes to fix modern cars, we go to schools yearly usually to learn new systems,have you bought any quality tools lately ? I personally have more than 100000 bucks in tools alone,how many professions require that kind of investment just to be able to do your job,shut up and thank and tip the guy that fixes your car next time you don't have a clue why it won't go

@amaxlite

4 жыл бұрын

@@tragiclife9760 I just speak from experience, I dont care what ur doing with ur personal life, save that for your family

Always helpful, thank you 😊

You can't get any more Honest. Great Service. its sad how many are not Honest.

I remember 2 things cause my emissions come to come up: MAF sensor and engine temp sensor. these parts are very crucial I realized. it will make you thing u need a catalytic converter replacement

Fixed my daughter's F150 by doing that same thing. It was stalling out every time she stopped. All I did was clean the MAF sensor. Fixed. Thanks, Scotty, again.

@Adem19811

5 жыл бұрын

fideau one thanks for info. My wife’s cobalt chevy does same exact thing at 60k miles I’m about to clean MAF sensor👍🏻

big hi from egypt You are always amazing and thank you for all this valuable information

Always getting good info Scotty........Thnx

Got to love a man that will always tell you the truth!!! Long live Scotty!!!

BMW dealership service would charge $100 for a "pre-diagnosis" then charge over $350 to spray the MAF clean. From what you did, this should cost me about $10 to do it myself, actually. It also helps NOT to use those oily K&N filters that will get gunk on your MAF sensors. Live and learn! You're awesome, Scotty! Thanks!

Hey Scott just want to give you a shout out and a big thank you I have learned so much from u God bless

Scotty you are a TREMENDOUS help. I sincerely thank you for all you do

@MatthewRoszak55

Жыл бұрын

Congratulations 🔝🔝

Running straight pipes all day in Florida, emissions inspections been gone for years 👌

Hey Scotty! Thanks for explaining about how to look at the speed of the car when the code occurred! This is the type thing I wish I knew more about, I mean, I have OBD-II software that gives SO much data, it's a program you had in a video once, the Ottotest software, and it's incredibly detailed, and it drives me crazy because I wish I knew more of the significance of the various things, and what things to look at. I wish there was a manual or something that expanded on those type things. Do you know of anything like that? Thanks! Longtime subscriber

Thanky you Lad precise info. does come in handy !🙂✌️😷

What Scotty said in reference to the traction light coming on as a default is true so much so that when I went to get my test NCT it was on but they know it was on as a default and still passed me

Glad to see this video i thought of doing this but never did lol once i did i was amazed from the results thanks again for this video tip

@chandanapriyasantha3970

3 жыл бұрын

Tuiol

I love how you tell it like it is, your awesome!

This guy is so awesome I love his attitude he just loves doing what he does and he's good at it he should come out with his own TV show

Hey Scotty. I watch just about a your videos. Thank you for sharing your automotive knowledge with the world, it really helps and is useful.