⬇️Scotty’s Top DIY Tools: 1. Bluetooth Scan Tool: amzn.to/2nfvmaD 2. Cheap Scan Tool: amzn.to/2D8Tvae 3. Basic Mechanic Tool Set: amzn.to/2tEr6Ce 4. Professional Socket Set: amzn.to/2Bzmccg 5. Ratcheting Wrench Set: amzn.to/2BQjj8A 6. No Charging Required Car Jump Starter: amzn.to/2CthnUU 7. Battery Pack Car Jump Starter: amzn.to/2nrc6qR ⬇️ Things used in this video: 1. Common Sense 2. 4k Camera: amzn.to/2HkjavH 3. Camera Microphone: amzn.to/2Evn167 4. Camera Tripod: amzn.to/2Jwog8S 5. My computer for editing / uploading: amzn.to/2uUZ3lo 🛠Check out the tools I use and highly recommend ► goo.gl/rwYt2y 🔥Scotty Shirts and Merch ► goo.gl/pTAeca Subscribe and hit the notification bell! ► goo.gl/CFismN Scotty on Social: Facebook ► facebook.com/scottymechanic/ Instagram ► instagram.com/scotty_the_mechanic/ Twitter ► twitter.com/Scottymechanic?lang=en

@mazensiraji2305

5 жыл бұрын

Can we use wd-40 spray

@nickamarit

5 жыл бұрын

Scotty, my car grinds quite loudly while I am releasing the clutch pedal after putting it in gear. It even does so ever so slightly while in neutral. I thought it was the clutch, but turns out it's not... edit: it's only when partial clutch engagement does it grind... at fully depressed clutch and fully released clutch, she's fine and dandy.

@user-bh1oy8kj5q

5 жыл бұрын

You are a top bloke Scotty.

@DanRC69

5 жыл бұрын

Hi Scotty. I've a Nissan note (2010 UK model) that's got an annoying knocking coming from the front drivers side suspension. I recently had both front wheel bearings replaced, but the knocking has got worse over time. Any advice would be MASSIVELY appreciated. BIG respect from a UK viewer. Your channel is the finest of its kind. Love it.

@maanmallak8953

5 жыл бұрын

شكراً thanks

Having your rubber crack can cost you thousands in child care expenses.

@AKNAM-cv4qu

4 жыл бұрын

Damn only 13 likes yikes it deserves way more

@catman1304

4 жыл бұрын

👍🤣😂🤣😂

@ImGoingSupersonic

4 жыл бұрын

Rubber can't crack if you don't use one 🤫

@nicholasbastardo2318

4 жыл бұрын

Blue 04 MX 5 ok you win, best comment ever🤣

@LEEBO-56

3 жыл бұрын

WELL PLAYED..LOL

I’m a flight nurse on an EMS helicopter . The guys ( and gals ) that do the maintenance on our helicopters use that product same as you & on hoses & hydraulic lines. We really prefer not to have failures while in flight. I’ve heard them preach the same message as you. Thanks Scotty.

@lupusdeum3894

5 жыл бұрын

Yeah, FIF bad!

@Wasssssuppppppp6869

5 жыл бұрын

Most of those hoses are Teflon steel braided. I would never apply a product to a helicopter without MFG approval bad things can happen. Been a jet mechanic for 12 years.

@EatMyPropwash

5 жыл бұрын

I’m an instructor at a major Part 142 school... either A.) you’re going to cause, not prevent, a problem, and B.) are wasting time and $$$.

@wes326

5 жыл бұрын

Nurses are the best (wife is a NNICU nurse)

@BRADLEEFOR3

5 жыл бұрын

Well I'm a school teacher and e everything said here,. I have no clue about LOL... So use this or not?

5:20 Trust me Scotty, salt didn't ruin your friends Chrysler, it was doomed when it left the assembly line

@skyiestosunsetrise2886

2 жыл бұрын

🤣🤣🤣🤣🤣🤣

@DustInTheAir

2 жыл бұрын

truth

@bruceb5481

Ай бұрын

Yup, they come pre rusted from the factory.

When I first started watching your show, I wasn't much impressed. Over time, though, I have come to respect your mechanic abilities and your presentations. Many of the items you have discussed, I have tried or asked around, and you are pretty much right on. I am pleased to say that you are one of the better mechanics, and you present actionable info that I am able to use on my vehicles. So, humbly, I say, thank you, Scotty. You're doing good !!!!

@greeneredgellc

Жыл бұрын

I like all the good advice except when someone say to put a good quality part if you intend to keep the car for years or in other words you can put a poor quality part if you are selling the car . This puts me off. I have always put the part, as if I am keeping the car for years despite knowing that I may be selling my car soon. It's cheating, if someone has two standards: one for self and one for others.!

@ECKER-ELECTRICAL

Жыл бұрын

You're doing well as opposed to you're doing good Mr. PhD

@donaldhoot7741

11 ай бұрын

You were right at first! ; ;

@ssoldner

5 ай бұрын

@@ECKER-ELECTRICAL He's saying that Scotty is doing good for the world. ie, a do-gooder. He's not saying that Scotty is performing well, though he could say that Scotty is doing well at doing good.

I repaired my rear shocks with that AT205. They had leaked all the oil out from the seals, so I drilled a tiny hole at the bottom and injected one CC of AT205 into each, and filled the remaining volume with motorcycle fork oil. I then soldered the holes shut and have nearly 80,000km since doing the repair, with no leaks at all, and they are as firm as new. It's good stuff, saved me a fortune.

@MrBilld75

4 жыл бұрын

Wow, that's a cool trick!

@TheHelghast1138

4 жыл бұрын

Whoa! That's brilliant!

@l3urlyi345

4 жыл бұрын

Except that you've heat effected the metal around your solder joint, and thus have weakened the whole part overall

@kevinisawake

3 жыл бұрын

@@l3urlyi345 80 000km - ya.....it dont matter....hahahaha. Until you crash but by then you will be in heaven....hahahah.

@costantineyoussif6679

2 жыл бұрын

Do you think I can use it on engine bay rubber hoses ?

Scotty's memes are priceless!! 😂

@vitaliyjuterbog8912

5 жыл бұрын

They may be their own thing.

@ItsNotAProblem

5 жыл бұрын

rev up your memes

@adamuberschaffenheiser8501

5 жыл бұрын

Lmao the adorable face typed username Ian fedele.cute yellow adorable yellow face lmao.

@stunt-

5 жыл бұрын

Ian Fedele “when you hit bumps” *shows Justin Bieber pic*

@Android-vk8yh

5 жыл бұрын

Lol seeying that Pringle box makes me want to find some of the uses for it🤣

Amen on the AT-205. Per your video started using it on both my 8 year old car and my 28 year old car. I clean what I can with windex then apply AT-205. It really works just like you say . Am delighted to have leaned about it from you.

@aymenninja8120

Ай бұрын

maybe if you just clean you will notice the same results

Hi Scotty, Before you I had never used or heard of AT-205. After watching your video I bought the product and tried it out. I sprayed my undercarriage suspension parts, rubber boots and everything rubber while the car was on the lift a year ago. After checking recently I found all the parts I sprayed still look new. Great product!

@g35tho11

2 жыл бұрын

You being honest??

@mr.d8214

Жыл бұрын

@@g35tho11 And YOU'RE not?

@shaneomac5074

9 ай бұрын

@@g35tho11 if you’re unsure just use silicone spray, it’s 100% harmless, can do no harm, if it doesn’t fix it it won’t hurt anything

Preventive maintenance is key for a long journey with minimal problems 👉

@omartinoco9930

5 жыл бұрын

This is ultra maintenance though for old cars

Mr Scott. Keep sending tricks. We all want to keep our car,running good and safe,as long as possible. Thank U for ur great work. Have a awesome day.

This is great to know. I have been looking for something that would protect the rubber suspension bushings. I thought the AT-205 might be the answer but now that I see this, Hell Yeah! WOO!

I've been binging your videos non stop and I cant thank you enough for the amount of knowledge you've passed on! I'm quite new to automechanic work but I feel like I've learned a lifetime of invaluable information from your channel and Im excited to keep great care of my car :)

@racheat

2 жыл бұрын

I've found immense value in starting and keeping a google sheet for each car....dates and mileage in the first two columns and ever single repair and part number and tire rotation across. My only regret is not recording costs of parts and repairs.

Am I the only one at 3am checking my damn suspension because of Scotty?!

@jveronica812

5 жыл бұрын

😁 I was just thinking about going and checking my power steering fluid and it's 4:50 a.m. and then I read your comment and now I feel nauseous is that that too funny

@dancorpsman216

4 жыл бұрын

Nah, it's 0417 in the morning. God, I need to get a life... Thanks Scotty.

@christiansanchez4666

4 жыл бұрын

2:18 at the moment lol, nope!

@frankieromantv7653

4 жыл бұрын

Lol naw Scotty got great advice checking everything 😂

@snarffforever5165

4 жыл бұрын

😃😂

I think Scotty Kilmer hands have a mind of their own...lol I love it

@prince_sach50

4 жыл бұрын

lol ikr

@doctorartphd6463

4 жыл бұрын

I have mentioned that myself. Although, with time, you kinda get used to it.... Ha !!! Be well, Jonas.

@billykitchell9406

3 жыл бұрын

Haaaa

@tsaunphilip389

3 жыл бұрын

S o true

@michaelgonzalez2843

3 жыл бұрын

Yeah, that Check's Out. 👍

Per ATP tech support: The active ingredient in AT-205 is heat activated around degrees 180F, you will see no benefit by spraying it on a rubber object that is exposed to air, it will just evaporate. Also AT-205 needs a carrier to blend with such as engine oil or transmission fluid. We’ve actually done some test on rubber hoses, belts, etc. after a couple of hours the stuff just evaporated and you couldn’t tell it was ever applied.

@MrOne-vi7ow

8 ай бұрын

😭😭😭😭😭😭 I knew something wasn't right I brought two bottles at $27 a piece and what you said where the exact results that I got 🤬 can you recommend a product that would actually work for this situation because I basically just wasted$60 in all of my time😢

@gregs6403

8 ай бұрын

This is proof that even very experienced mechanics are subject to placebo.

@MrOne-vi7ow

8 ай бұрын

@@gregs6403 unfortunately this is CORRECT...... AND EXPENSIVE 🎯😝🤬

Scotty, you may want to rethink this advice. The MSDS sheet for ATP Automotive AT-205 Re-Seal lists the liquid's components as 100% glycol ethers. Glycol ethers are a commonly used solvent in paints and various cleaners. I would strongly suggest something possibly silicone-based that is far friendlier to various rubber compounds.

@shaneomac5074

9 ай бұрын

It’s actually designed specifically for use with rubber so I’m sure they have some sort of chemical that counteracts them or something of that nature, but me personally I use silicone spray from pb blaster

@ry-io1nd

5 ай бұрын

funny how mr scotty doesnt reply to your comment about him being wrong...

@user-yl3gv7eh8d

4 ай бұрын

I'm pretty sure Scotty here knows exactly what's he's teaching about. I'm following his advice

Great advice Scotty! I've done the reseal process to all my older cars from the past and present. As a teenager in High I worked at a ESSO station performing Oil and Filter changes, and part of my process was lubing those seals and rubber grommets with that same solution or something similair to it.. It preserved all those rubber parts very effectively!

@alanbrookes6637

7 ай бұрын

I can’t listen to this blokes voice.

Scotty do more suspension videos! This was very helpful and informative!

Scotty, your videos are so good, I love all your solutions. You saved me many thousands of Euros the last 5 years (cat cleaning, brake cleaning, ... the list is endless!) 🤗 I really appreciate that you are sharing these well edited videos and saving us many hundreds of Euros a year. But most of all, I appreciate you for "publishing" your many years of professional knowledge in public, as you have worked hard for your knowledge and experience in the past decades. You are a truly kind, helpful, good an honest person! Thank you on behalf of myself and all viewers! 👍👍👍

Thanks Scotty always great help gotta do some work on the car to keep it from failing the suspension great video keep them coming been a fan for year's 👍😁

It pays to keep your rubber nice and supple.

@cronicjointpain1

5 жыл бұрын

Scotty, should I spray this on my condoms to prevent breakage?

@delbert359

5 жыл бұрын

That's what she said....

@Elaba_

5 жыл бұрын

@@cronicjointpain1 You'll get more rides. Use daily.

@nazu5998

5 жыл бұрын

cronicjointpain Condoms ? All about Raw gang

@cronicjointpain1

5 жыл бұрын

@@nazu5998 Have fun with the aids or unwanted kids you can't care for.

You are an absolute gold mine Scotty!

Scotty is the Einstein of automobile mechanics. He holds an amazing amount of knowledge and thorough practical auto-mechanical/electrical/computer work experience.

Hey Scotty! So I am learning so much from you and I'm grateful for your honesty. I'm not getting that anywhere else. Everywhere I take my 2010 Ford F-150 Raptor SVT I am being ripped off so now I am learning how to do a lot of things myself including just good prevention and maintenance. That being said, for this video should we clean or at least rinse off all of the rubber before putting on the ATP AT-205 reseal? Curious.

Love it you don't have a intro sequence, intro music...you just get right I to it! Thank you!😎👍

@LabaJorge

5 жыл бұрын

Agreed!!

@GuerreroDelInfo

3 жыл бұрын

But he does. It's "rev up your engines!"

@williamrobinson6377

3 жыл бұрын

@@33subsnovideos35 so he has a nice short into......... incorrect to say he doesn't have one. Lol just saying

I love watching your videos Scotty, great tips and very deatailed explanation of the procedures to be done. You have a subscriber now!!! 👍

If anyone is wondering, The active ingredient is "Diethylene glycol monoethyl ether". BlueDevil Power Steering Stop Leak also is the exact same thing. If you are having a hard time finding it at-205.

@gregorymalchuk272

8 ай бұрын

Is that the same stuff in Bar's Leaks One Seal Stop Leak? It's half the price of Blue Devil which in turn is half the price of AT-205.

@SteveEh

8 ай бұрын

Looking at the SDS for that product, I do not believe it has the same active ingredients.@@gregorymalchuk272

@cristencowan428

5 ай бұрын

Well, I can say I've personally tried this on my daily driver (I know, very boring compared to the other comments and thier applications, please bare with me) I tried the exact product from the video and I have regretted it and will forever see Scotty K as a joke. Do NOT use this product unless you have researched it for yourself and know it's appropriate (chemically). It's been 2 years since I've done this but the damage its done was visible around 6 to 9 months later. I should've done my homework, and just stuck to WD-40. Don't make the same mistake I did.

@gregorymalchuk272

5 ай бұрын

@@cristencowan428 What damage did it do?

@tourdelance3698

Ай бұрын

@@gregorymalchuk272I’m curious confused which one would you recommend?Thanks

I called the manufacturer of AT-205 about using it on suspension bushings, and they said it will lubricate for few minutes, but the stuff will evaporate. And they said I would be wasting my money. I personally would recommend silicone spray, and make sure to stay away from lithium grease and all purpose WD-40 since they are petroleum based. anything petroleum based will destroy rubber.

I've always thought that there should be something to keep CV boots etc soft so they dont crack...thanks for the tip Scotty!

Scott, ok i admit it... I'm now hooked on your vids/tips. Thanks for helping us consumers out. RUYE!!

You're a Boss, thank you for sharing your knowledge. I'm a new subscriber for sure!

"live free or die" that is really good quote,, I know many people didn't see it!!!

@ramabamaboomboom

4 жыл бұрын

Over the garage door

Yes that is true, I got some ebay suspensión parts for my weekend car that sleeps in the garage and I have to replace them already because they are cracking, the tie rods specifically, always get OEM.

Loving these maintenance videos Scotty! Keep it up!

That’s what I love about Scotty. He tells u about mistakes people usually make so u don’t need to make the same .

Love your videos, keep up the great work. Your fan from Ontario Canada.

Good,solid advice. Thanks for sharing your experience!

AT-205 really is good stuff. Thanks Scotty for saving everyone who hears this - big money.

@Archer28M

5 жыл бұрын

Yeah but what about Europ what to buy?

@righteousredneck777

5 жыл бұрын

Who sells it???

@Cmoney860

5 жыл бұрын

@@Archer28M Vaseline

Man, you're the best! And this is coming from a mechanical engineer! It's even harder to find honest mechanics that won't rip you off here in Costa Rica...

@genericdude6551

2 жыл бұрын

Yeah there are a lot of dishonest and incompetent mechanics here in the states also. The stories I could tell......You can't believe everything you hear on youtube but Scotty seems to know what he's talking about.

Mr. Scott ! You are simply the man! Thanks a lot!

Scotty please do a short series of videos on how to maintain your car, or write a book. Just list all of your tips in one place. I would love to apply your tips and see how long my next car lasts. Such a book or series of videos would make for a terrific high school or college course!

Thanks for the great advice Scotty. Love from the UK. 👍👍👍

Pro tip: If you cant get hold of AT-205, silicone spray works just as well. Thanks for the tip Scotty!

@nomak9576

3 жыл бұрын

And it’s much cheaper than AT-205

I recently bought my first car, and I have learned a lot from you.. I wish I had found your channel earlier

@genericdude6551

2 жыл бұрын

I wish we had the internet back in the 70's. Would've saved me a lot of aggravation.

Never heard of at205 but always wanted a way to maintain rubber. Great way to keep a vehicle driving like new. 👍 Thank you 😎

@genericdude6551

2 жыл бұрын

Maintaining a car is like maintaining anything else - gotta have the time, money, and desire to maintain everything. A lot of people don't maintain themselves........

You're such a great guy Scotty my friend and I watch your videos in the UK all the time my nickname for him is actually Scotty. Keep up the great work

@lupusdeum3894

5 жыл бұрын

Is he a Scot?

This stuff can be amazing on what it does to rubber & many applications can go way beyond suspension...almost anything made of rubber. I had a 40 year old air pump for fish tank that had bellows that was hard & crispy. Output was weak & treated with AT-205 & a cotton swab. Treated & let cure for 1 week. Output tripled & no fish died. This stuff is also great for car door gaskets!

The most helpful car mechanic on KZread. Thank you for all your helpful info & preventive tips Scotty. Merry Christmas & Peace be with you and yours.

@MarcDufresneosorusrex

Жыл бұрын

yes many times

Now this is Scotty in FULL HD! love the new camera!

Thanks my friend ,very helpful videos , god blessings !!

The wheel bearing rollerblade wheel pic made my day thanks Scotty always the best with truth and humor

Not only are you giving great information but the pictures you post up in the corner are hilarious and make the videos worth watching even if you didn't have a car at all!

Thanks Scotty, for the AT-205 tip! Saved my car from the junkyard! :)

You are awesome Scotty! . You are the best grandfather!

I use silicone spray on all the rubber parts. One time I was out of silicone spray, so I sprayed with Mother's VLR.

Scotty exerts physical pressure on his breaker bar- HUH! Scott’s takes off a nut- HUH! His sound effects and pictures are hilarious! Awesome video

@whyg6703

2 жыл бұрын

Remember those days when Scotty do that Huh!

Thanks Scotty, I appreciate your info.

Thank you for your great Tips 😎❤

Scotty thank you for this tip! Could you also use 303 Aerospace Protectant for the same purposes instead of the AT205 Reseal?

@timmuirhead1177

3 жыл бұрын

I have for years. Or armour all, whatever is cheapest. Does it work? Absolutely.

WEEKEND AND SCOTTY"S, love your style and content

@reeceedwards2509

2 жыл бұрын

Beer

SCOTTY YOU ARE A LEGEND !

Samson’s strength was his hair. Scotty’s strength is that Celica.

@jacoblazerus2905

5 жыл бұрын

Funny

@Taylor57179

4 жыл бұрын

😂😂😂😂😂😂

Hey Scotty, love your videos! I just sprayed my stuff down with the AT-205. Just had a quick question for ya. If I wash my vehicle pretty frequently, will that take this stuff off? OR does it soak into the rubber pretty well where I don't have to worry about it? Thanks and happy driving

I think your preventive maintenance tips are excellent friends used to make fun that i do the same kind maintenance but i agree 100 % thanks for the advice

I've used Fluid Film for these applications...is AT-205 a better choice.Thanks for your videos.

Love your common sense. Prevention better than cure. Thank you for your very informative videos...much appreciated...!

Awesome just what I was looking for! I just discovered your channel...it’s been a Scotty marathon for the past few days!!!

@MrBilld75

4 жыл бұрын

He gives some of the best advice on KZread. He's got a lot of tips and tricks you can't find elsewhere on KZread and it's from his decades of experience and it is stuff that anyone can do really and it WILL make things last longer. He's very honest and any customer of his, should hold on to such a Mechanic, as long as possible. Honest ones are worth their weight in gold. He's absolutely right about a lot of stuff and I have heard other honest Mechanics say the same things as he does. It just makes good sense.

Your advices are excellent! I am not a mechanic but I have been doing a lot of research about how to fix car problems for years.. the problem is that there are too many dishonest mechanics out there

I've had good luck with 303. I go under the car twice a year and spray all the black rubber I see. Then I do the belts, hoses and tires. Finally, I spray the door and trunk seals.

@huyduong5716

5 жыл бұрын

Российский робот same here. I use that to, but not to sure it’s good to use with blubber with metal contact.

@MrRusoloco

5 жыл бұрын

What is the exact name of the product because 303 has many products.

@user-vj1hy8si7p

5 жыл бұрын

@@MrRusoloco 303 Aerospace Protectant. I buy it by the gallon.

@huyduong5716

5 жыл бұрын

Российский робот that’s the same that I have.

@azr2d1

5 жыл бұрын

Does that help to prevent rubber doorseals freezing stuck...

Thank you Mr. Scotty for your professional advice!

That's a great tip Scotty! Thanks for sharing this.

Good tip there. Tongue in cheek here: but maybe you should do a video on organising your garage?

Thank you. I will do the same under my cheap jeep patriot.

Sweet Project Cars channel says soak your belts for 10 minutes in 303 Space Protectant and you will never have to replace your belts again, they will never dry out or crack.

@NiumeLTU

5 жыл бұрын

Yeah we need scotty to prove it or debunkit.

@SlowBoiGang

5 жыл бұрын

Sweeeeeeeet project cars

@maulananurmohamadbinmohama2852

5 жыл бұрын

I think he use this because its more watery than 303

@huyduong5716

5 жыл бұрын

303 is very expensive

@tylerdurkee1103

5 жыл бұрын

You still want to replace belts because the ribs of the belt extend. And rub on the bottom and it will throw your belt off.

Thanks for your help with this matter, I am having to do this now and your savings is good news 👍.

Scotty!!! 🙏🙏🙏🙌🏼🙌🏼🙌🏼 your amazing. I used the AT 205 on the top of my struts like you said on my strut mount housing and omg it’s so much quieter. I had the struts replaced 3-4 years ago but not the strut mount housings on my 2007 Prius. I love my car and want to keep it going til I’m done with my degrees. I wish I had learned of this sooner as we rode this car for years with crunchy rubber sounds which was more pronounced in the rain or going over a speed bump. I watch your videos all the time. And I wish you well!

@costantineyoussif6679

2 жыл бұрын

I did it today on my upper strut mount but not sure why All the coating came off right away and it left me with bare metal ? Is that normal or that was all of dust accumulated over time ?? Any help would be appreciated

@greeneyesfromohio4103

Жыл бұрын

2 years later, how is the AT-205 holding up? Still keeping your ride quiet?

I found this video to be one of your best (important preventative maintenance) since I've started watching. Thank you Scotty!

I remember when this channel was at 20k subs Good job. Thank you for these vids Educational and entertaining 👑👓👑 🙏

@bilbobaggins4710

5 жыл бұрын

Sad....This guy is a joke....

Very useful tutorial! Great job!

Thank you for sharing those great tips

Scottys best video thus far

When to start AT-205 on a new vehicle? I put this on all my older vehicles when they are up on the rack. Also, what are your thoughts on 303 protectant?

Scotty is it possible to share your knowledge on recalls and are they all needed . I have 2006 Nissan Altima , just discovered a recall pb023 been out there since June 20th 2006 never notified. The car runs great no issues thanks to you and your videos. Amazing how many little maintenance items if done keep the car running great . Thanks K

Thank you for all your knowledge 🚗

This is funny, i just did my rear struts yesterday, they were quick struts tho

Would aerospace 303 work just as well or it has to be this?

I love the pictures you put in your videos Scotty. They're half the genius of each clip!

Thank you Scotty!

If I listen to everything you do I'll be working on my car till I die.

@steveleamont

5 жыл бұрын

James M you mean you’ll be doing some maintenance once a year on car you’ll own for 25 years?

@kurtbourhenne7104

5 жыл бұрын

James M Who owns who? Just like owning a house. A retired friend of mine was a major finance officer for Lexus, he only leases his cars. So he always has a newer car and never cares if it breaks-down. I guess it costs out once you get in a certain price range!

@AnythingMike

5 жыл бұрын

James M 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

@romanticdonkey468

5 жыл бұрын

James M ... and your car will still be running strong long after you’re gone.

@jamesm568

5 жыл бұрын

@@romanticdonkey468 And the longer I keep it the more I'll be under it.

Scotty thanks for the tip on the sealer spray! I've been looking for a way to protect my bushings etc.

Who would have thought? I honestly never thought about this. I do live close to the ocean and I wash my cars underside as often as possible. It definitely helps. Scotty, you made my day or evening. Depending on when you read this. (:

A bike repair shop suggested Armor All Original Car Protectant to keep tires from drying out since it contains the same ingredients as sprays marketed as tire protectant. I've been using it on my car's interior plastic and rubber as well as the engine bay's rubber parts. Walmart sells a 1/2 gallon of it for $14.98 which is much less expensive than 8 oz of AT-205 re-seal.

Never thought of it! There goes my Pringle Air Intake Induction System.

@lastgengamers1137

5 жыл бұрын

What flavor of air intake will you choose?

@bowtiethirteentwenty8627

4 жыл бұрын

@@lastgengamers1137 Nitrous cheese please.. :P

@MrBilld75

4 жыл бұрын

@@bowtiethirteentwenty8627 Lol.

Love your videos Scotty! Thank you so much for your time you spent making them.

Wow, thank you, Scotty, my brother!

Scotty is the best, just bought that stuff & putting it to use on my 07 forester

Tks Scotty real good advise as preventing future problems and keeping your car in good shape. Tks from NC.

What is the best alternative to this at-205

I don't have a car, but I use a scooter everyday. I replaced my engine bushings twice a year in repair shop but I watched your video and now I take good care of my vehicle, AT205 reseal makes my bushing really last longer. It's been 2 years now.