How To Set Turbo Waste Gate Crack Pressure On Your Can Am X3.
Автокөліктер мен көлік құралдары
This is the process to set the waste gate crack pressure on your Can Am X3 if you're running our Alpha 1 reflash. This is the crack pressure setting you need adjust your waste gate to on your 120hp Base model X3.
Link to purchase Mityvac pump used in the video:
www.amazon.com/Mityvac-MV8510...
Пікірлер: 9
Great video
need to start posting more videos !!!!!!!
What’s a turbo r factory setting at?
Hey where can i buy that pump
Are u pushing pressure or pulling vacuum?
@VizziMoto
3 жыл бұрын
He stresses at the beginning that it has to be pressure. Mityvac sells a vacuum/pressure pump for about $50.
@duneme
Жыл бұрын
Your simulating Boost (positive pressure your Turbo is generating!)
How many turns to get to 8 psi
@1WAYBAD
4 жыл бұрын
You will need to contact your tuner. The turns from stock is not the recommended procedure for setting crack pressure. Like stated in the video, counting turns is just a good starting point. The hand pump with gauge is the only accurate way to set crack pressure.