Tha ks for the vid. The best one ive seen on this maintenance.

Thanks for the front diff fill behind tape recommendations- couldn’t find it

Great info thank you for taking your time to explain the key points you got yourself another follower

Great stuff , why do they have 2 drain plugs any idea ?

hey brother congratulations for your video I need to do it to my x3 max only I don't know English but with your video I understood very well just from watching it and I have to use the translator to write how many liters I have to use for differential and transmission

Thanks for making this video and great job!

Great Video!!! I have a question on the front differential. What weight are you using? Is it the same as the rear? I ask because I bought the service kit and the diff fluids were 2 bottles of the 75W-140 and 1 bottle of 75W-90. I assume that the 75W-90 is for the front diff?

Got lucky on your front diff. Changed mine at 50hrs/600mi and I just about shit myself when I saw the amount of sparkles. But it’s about due for another service and hasn’t exploded yet.

Very well done sir. Right to the point. You just earned yourself another follower.

If that bearing greaser doesn't have a 31mm internal diameter hole that slides over the 30mm axle splines on the XRC Turbo RR it aint gonna work. I bought one on evilbay that had that stepped lip in it & it was way too small (26mm I.D) to fit over a 2021 XRC turbo RR axle spline. I did get the right one but had to pull out the O-rings out of it as they are a tight fit & won't slide in with them on, still worked OK but it may be easier to take the knuckles right off & grease them.

Great tips...one reason to watch these. Even if you know how... watching someone else can very often result in little tips. Used by someone else and you say dang, how did I not think of that... so simple... inserting the funnel lol... so simple lol.. Btw, nice shop, or is that the dealership where you work ? Great show, thanks...

@RustbeltMechanic

3 жыл бұрын

Thanks man. It’s at the dealership where I work currently

@ronthompson2366

3 жыл бұрын

Very cool, and it's great that they allow you to use the shop. Thanks, hat's off to the dealership to allow you to provide these great videos ! Along with just enjoy the information you provide...

@chuckheinch

Жыл бұрын

Yup, fresh eyes and different tactics

I've got the same car and that same rack at my shop- good taste!

@nicklewis2023

2 жыл бұрын

What rack is this?

@espritmike

2 жыл бұрын

@@nicklewis2023 it is a 10000lb hunter scissor alignment rack

X3 turbo rr 300 miles does not go in four wheel drive took actuator off flip switch does nothing this is after dealer ship said fixed . Any idea?

Great vid brotha

That’s super cool

Great video sir. Thank you.

Awesome video . Just did a full fluid change on my 2020 xrc as well . Was curious as i didnt measure the fluid amount i filled in the front diff. But i filled enough where it was starting to flow out of the 8mil fill plug area . Is that the correct amount ?

@RustbeltMechanic

3 жыл бұрын

Yes that is correct👍🏻

Hey man, I just did the first engine oil maintenance. I filled the oil level just above the max line, I took the car for a ride and in about 10 minutes it turned off while driving and it won’t start. If I let it sit for like 15 or 30 minutes it start but for like 5 seconds. You think that overfilled oil level can cause this ? And how can I solve it ?

I see no responses to the questions. What fluid for front diff and how much does it take? Is it recommended every service to do the diffs as well? Does the rear diff oil do the trans as well? Same fill and rain does both?

How did you know your clutch went out ?

Great video! Thx!

When do you recommend to change the spark plugs?

Are 2 first plugs that you removed (10mm and 17mm) are for engine oil? Or small one was for differential? Because after I changed engine oil only my steering wheel was shaking and some yellow sign show up on dashboard

@NANDOS_FILMZ

10 ай бұрын

Just for engine oil if the steering wheel is shakey maybe its the battery or steering wheel fluid

If you wanted to you probably could drill out all the rivets and install nutserts into frame so you could bolt the skid plates on.

@RustbeltMechanic

3 жыл бұрын

Very heavily debating doing exactly that

@tasd5673

3 жыл бұрын

That’s what I have done to my max x3

@chuckheinch

Жыл бұрын

I saw a video where a guy did that.

My can am only has 300 miles and 20 hours but I’ve had it for 2 years. Do I have to wait for the 50 hours/1,000 miles to do the services?

Like how you cut out the part where you put the front diff fill plug back in. It’s a PITA. Lol

Hello. What service do you recommend at 10 hours for a 2020 can am maverick x3 rs turbo rr? My dealer told me I should bring it in for a 10 hour service that cost $465. Is this right? They change oil and check other stuff I believe. I need to call for the exact service.

@RustbeltMechanic

3 жыл бұрын

10 hour? Nah.... that’s them pushing extra stuff. Owners manual says 50 hours or 1000 mi for first service. And 100 hours or 2000 mi for each service after that

Do you need to use new washers everytime you do a oil change?

@fernandozavala388

3 жыл бұрын

Yes! Please do. So important

Is this for the first service on it? I’m coming up to 50 hrs and I want to do my first service myself because dealer wants way to much. Can you help me out with what needs to be done?

@RustbeltMechanic

3 жыл бұрын

This video was exactly the first service. I pretty much covered it all aside from greasing wheel bearings which I cover in the big brake video.

How long do you think before you drill the rivers out ?

@RustbeltMechanic

3 жыл бұрын

I’d definitely like to sometime soon

Nice ride bro!!! We need to meet up one day and go ride together brother. It would be a blast.

@RustbeltMechanic

3 жыл бұрын

Yes definitely!!

I think its pretty lame the oil filter doesn’t come with the o ring.

👌

Did you used the same 75 140 xps for front and rear differential

@luismiramontes5542

23 сағат бұрын

No it’s different front and rear

👍

Greasing the bearings with that tool is what causes failures

What grease did you use ?

@RustbeltMechanic

3 жыл бұрын

Just red all purpose synthetic grease

Why not replace the rivets with something else?

@djlansing2724

2 жыл бұрын

Why replace them rivets before the skid plate is worn..? Once the skid plates are worn he's going to have to drill out the rivets in order to remove the old plates anyhow

@omnipotentwonder

Жыл бұрын

@@djlansing2724 never heard of a skid plate wearing out, at least in the last 10 years of wheeling

I've got news for you.......................................Those "BOLTS" you refer too are "DRAIN PLUGS!, NO BOLTS!!

Don’t see the last name Mehr too often.

Not super easy to do that service with out a lift!

@RustbeltMechanic

3 жыл бұрын

It does make the service much easier

Would not recommend RIDE 1. in Springfield OHIO.

@vincenzocelentano9173

Жыл бұрын

Can you do a video on flushing the coolant out of the system. Then bleeding the lines? Please