Keep all receipts and record each maintenance job done in a little note book for extended warranty to have as proof. Dealers cry because they want to charge as ass load of money to do simple work.

@GLifeUTV

3 жыл бұрын

Very true, lil note book is a good idea💡...

@trevorbraden5448

3 жыл бұрын

Everyone I know or read about said they always have problems getting anything fixed with the extended warranty anyways its frustrating because I want to get one but am nervous......... I would hate to spend that extra cash and then not be covered

@MegaRpgPlayer

3 жыл бұрын

@@trevorbraden5448 Im in the same boat ive got a machine coming in about 3 weeks still dont know if i wanna go with an extended warranty or not

@erikcastellanos1339

2 жыл бұрын

My 22 has 200 miles on it. I was going to do the oil change on it, but I guess I should wait.

I'm new here so I want to take the time to thank you for making this video. It is my first UTV I own, so your video was very helpful since I do not have a service manual for it.

@GLifeUTV

2 жыл бұрын

Awesome to hear.. join some of the facebook groups. As they sometimes have the service manuals..

In order prevent the mess from the removing the filter, get in the car floor the gas pedal and hold the start button for 5 seconds. It won’t start but it’ll pump the rest of the oil out

Great video. You hit on everything for first oil change and general maintenance. A couple life hacks. I use a form-a-funnel for oil changes in my x3. No mess, I mold it like a ramp from plugs and let it drain to the side of car. Not a single drop of oil on my skid plate. Also get some pj1 contact cleaner. It’s like brake clean but not harsh on plastics, electrical or engine components. It’s awesome for degreasing and no water needed.

@GLifeUTV

3 жыл бұрын

Those work great. I have one at work. Thanks for the life hacks.. im definitely gonna try the pj1👍👍

Good video man. It’s awesome the ways you splaying the parts how to do it everything

@GLifeUTV

Жыл бұрын

Thank you

Love the content, I will one day have a can am!

@GLifeUTV

3 жыл бұрын

🤟🤟

Top content Frank. Respect ✊🏼

@GLifeUTV

3 жыл бұрын

🙏🤟

You should use drown mode to keep from spilling when you pull the oil filter

lmao ya bro we are fat!! we hit everywhere. I need those 32s asap. Thanks for the help ese!! Good tips to. Didn't realize how little I know about my X3 lol

@GLifeUTV

3 жыл бұрын

👌👌

Put a small rare earth magnet inside your nitrile glove to catch metal things you dont want to drop, or to find dropped/lost bolts

@GLifeUTV

8 ай бұрын

Great tip

Hi. you need a Curtis valve in your oil drain bolt location and use the CanAm drown mode. Look it up this is a game changer for oil change.

@GLifeUTV

Жыл бұрын

They make great products

@tylerlegg3069

4 ай бұрын

What's the thread of the drain plug?

Great video brotha 👍✌👌

@GLifeUTV

2 жыл бұрын

Thanks

There is an access hatch behind the seat to reach the back latch

👍really good content bro ! Thanks for all you do !

@GLifeUTV

3 жыл бұрын

Thanks bro🤟👍

From my understanding they reset valves if needed during your first service?

Ive taken my 2018 X3 XDS to the dealer at around 500 miles when i had electrical issues and asked about an oil change. I was told manufacturer recommends service at 2000 miles. Im currently at 900 miles without a service and was planing on getting it done at 1k. Only thing Ive replaced since has been the air filter.

@GLifeUTV

3 жыл бұрын

I remember saying a service manual that the first oil change is at 1k.. then every 2k after that

@albertchico4815

2 жыл бұрын

Yes, every 1k after the first 500 miles “break in period” then after the 500 miles 1k miles after that

Do you have a video how to reset the maintenance required

Not sure about the newer models but mine in the manual said the front and rear differential fluid needs changed after break in.

@GLifeUTV

2 жыл бұрын

Great point. Would be a smart idea especially with the amount of break in ive seen on these

Not about the machines; but your house looks dope AF man.

@GLifeUTV

3 жыл бұрын

Thanks bro🙏👍

Very well done

@GLifeUTV

3 жыл бұрын

Thanks🙏👍

Just did my first oil change this weekend I went with Motul

@GLifeUTV

2 жыл бұрын

They make good stuff👍

@2Mjr002

2 жыл бұрын

@@GLifeUTV Yesssirr !

Great video. But I am wondering what kind of riding you do that the stock tires are able to still be intact.

@GLifeUTV

4 ай бұрын

Not my machine.

Great info

@GLifeUTV

Жыл бұрын

👍👍

Good job

Hey brother I love your videos, quick question when I replace the oil filter do I have to take all the oil out of that housing? Because when I put them back in there it was still filled with old oil.

@GLifeUTV

2 жыл бұрын

I suppose u could. but its not all that necessary. you will never be able to remove all the old oil

@dustyfarmer

2 жыл бұрын

I use a clean piece off a roll of paper kitchen towel to soak up & get out all that old oil down the bottom of the filter case.

I remember the first time doing a service and was mad because you couldn’t remove the skid plates 😤

@GLifeUTV

3 жыл бұрын

Yea.. pretty dumb design.. rivets freaking are a pain to remove

Hey gee, I replaced the rear radius rods. Can you tell me if I should tighten them up with the car in the air or sitting at ride height? Thank you

@GLifeUTV

Жыл бұрын

Tightened what the jam nuts?

Literally just saw you drive past in the rzr were on lot 170

@GLifeUTV

3 жыл бұрын

lot 170??? wasnt me.lol

Amsoil is the only oil i run in all my vehicles. They are be far the best in the industry. Made all my bikes and clutches run 1000 times better.

@GLifeUTV

3 жыл бұрын

Nice.. ill give them a try on my personal car

@MGaona82

3 жыл бұрын

@@GLifeUTV when i had my YXZ1000R it made shifting almost unnoticeable. And the motor ran way cooler.

@GLifeUTV

3 жыл бұрын

@@MGaona82 Really, thats pretty crazy that it ran cooler..i use to put diesel oil delvac in my street bike..also made my shifting buttery smooth. whatever friction modifiers where in there the bike liked it.

@MGaona82

3 жыл бұрын

@@GLifeUTV im about to put the new Signature Amsoil.in my '19 F250 Super Duty. The Deisels love the additives from Amsoil.

@underourrock

3 жыл бұрын

I love Amsoil in my 4 vehicles and a couple family members. I send samples in for analysis at independent labs from time to time and they always come back with excellent results. With that being said, the oil they have is the 0w40. I was disappointed that they didn't have the 10w50. For my other vehicles it's pretty much the best oil you can get. If I were to use something else it would be Mobil 1. BobIsTheOilGuy is a site I learned a lot about oils at. Project Farm here on KZread has some really great tests going too.

Hey Frank ! Idk if you’ll see this but can you lmk the measurements for when I fix tune the shocks on my 2021 can am xrs maverick turbo RR 4 seater ? Thanks bro thanks for the help always 👌🏻

@GLifeUTV

Жыл бұрын

Hey What measurements do you mean?

@ItsHisComedy4You

Жыл бұрын

@@GLifeUTV when adjusting the suspension on the can am idk what to go off of.. the shocks/springs are sagging a bit on my xrs & I wanna adjust the springs & do what’s called the “fox tune” at home Thanks Frankie !

What grease do you use? I clicked on the link and saw Sea Doo grease is thats what you use? I went to the dealer I bought it from and they said it was sealed and they don't grease them. I have a 2020 Mav R3 Max.

@GLifeUTV

3 жыл бұрын

That is the correct suspension grease i use for suspension grease zerk fittings.. u can use any grease u like from your favorite brand for the suspension. The stickier the better.

Hey man. I used the XPs 0w-40 on my first oil change this weekend. You think I should change it ? I live in riverside.

@GLifeUTV

3 жыл бұрын

I honestly think youd be fine but its not recommended. If we were in the middle of summer.. i would say it's to thin

🏆🏆🏆👍🇺🇲🙏 Thank you for sharing

good video. also wanted to add only add 3.5 liters of oil at first. i added the recommended 3.7 and it was a half inch past the max full line. also be very mindful of the crush washers they are a bitch to dig out of your skid plate if it falls off the nut 😅

@GLifeUTV

Жыл бұрын

👍👍👍 thanks for sharing Nick

I haven’t done my first oil change and I’m 635. Do you think that going to mess up my warranty if I take to a dealer for it? For some reason I thought it was 60 hours.

@GLifeUTV

3 жыл бұрын

No but i would definitely get it done soon

Hey man I own an X3 xrs and I just did the first engine oil maintenance. I filled the oil level just above the max line, I took the car for a ride and in about 10 minutes it turned off while driving and it won’t start. If I let it sit for like 15 or 30 minutes it start but for like 5 seconds. You think that overfilled oil level can cause this ? And how can I solve it ?

@markmem1234

8 ай бұрын

Did you ever figure it out?

I own a Can Am Mav Max 2022 and the drive belt gave up after 14 hours of use. Is this a normal thing to happen on this vehicles? The belt itself cost me almost 200 bucks. Do you guys have any advice on this, is it a normal thing to happen or did I push the vehicle to the max for the drive belt to give up. I will appreciate any comments or advice from any one here. Thank you.

@GLifeUTV

2 жыл бұрын

Id make sure there isnt anything that looks abnormal on the clutches.. thats low miles for the belt to give out

I have a new oil kit 0w 40 from brp But im in new mexico where it gets hot as hell. Manual says 0w 40 is for general purpose. Should I get the 10w50

@GLifeUTV

2 жыл бұрын

I would personally

I'd be interested if those thin oils like 0w-30/20 would do any good to those machine. My mechanic in my head says just use the 10w-30 because the thin stuff won't protect enough from such hard use. 🤷‍♂️ oh the great oil debate 🤣

@GLifeUTV

3 жыл бұрын

Brp builds their engines with tighter tolerances compared to what engines use to be. For example gm LS family engines would normally run 5w30 oil. With the introduction of the LT motor family in the new trucks. They switch to a thinner 0w-20 oil because all of the bearing tolerances were tighter. The oil required is do to the design.

@Nashcaster

3 жыл бұрын

@@GLifeUTV I can see that. Would there be really any benefit running the thinner stuff?

@GLifeUTV

3 жыл бұрын

@@Nashcaster Im not an engineer but thats the thoughts behind it. Sometimes oil is oil😆

@Nashcaster

3 жыл бұрын

Agreed

Im gonna do my first oil change at 60hrs. Im gonna use Motul 5w30 full synthetic

@GLifeUTV

Жыл бұрын

lets go. haha

Whats up frankie this is todd from. The east coast riders where the mud and mountain climbs rule the ride great videos very entertaining. I want to come there and go riding you guys sometime I also got a x3!!! Xome out east to Ohio and check it also!!! Give me a whats up sometime on one of your videos!!!

@GLifeUTV

3 жыл бұрын

That would be awesome Todd. Hopefully when the channel gets bigger we can make those trips... And hellyea i will👍

Great vid, should I try AMSOIL over XPS?

@GLifeUTV

Жыл бұрын

I hear great things from amsoil. Try it out

I can always tell a Cali Brother by the way they wear their flat bill hat...lol

@adamjurrens1897

2 жыл бұрын

I bought that blue oil funnel from Amazon from your description. =)

Quick question brother I have a 2021 Can am x3 I have like 500 miles on the engine my question is when I start giving it gas it starts with a jerky start and after 5 miles an hour it’s fine what do you think it could be a friend told me to change the belt because it could be a sign of needing replacement???? Thank you in advance👏🏻👏🏻👏🏻

@GLifeUTV

3 жыл бұрын

Could be your belt.. have you been maintaining the clutch. Cleaning them out and what not

@maganasworld5661

3 жыл бұрын

@@GLifeUTV thanks bro I will order a new belt

@underourrock

3 жыл бұрын

My X3 RS RR is brand new and is jerky at 5mph. There is a lot of slip at 5-10 mph in High. Pretty sure the manual says that H is for 15 mph or higher. L is for low speed. Too bad these can't shift on the fly. ;). Also watch out for that reverse torque when letting off the gas. Better to let it off gentle if conditions allow for it. I'm still learning the feel of the pedal myself.

To G my maverick x3. The oil filter cap goes on only one way.

@GLifeUTV

2 жыл бұрын

Yea the newer models changed slightly

U work on these bro ? I’m trying to change my oil belt and just check it out I got a 2019 with 350 miles

@GLifeUTV

2 жыл бұрын

I do. Dm me on ig or email

That looks like a PIA for the oil change. Why is the tire pressure set so low if the tire is rated for like 45 PSI

@GLifeUTV

3 жыл бұрын

45 is usually like a max rating.. that is way to high. And it will make it ride like crap. Between 12-18 is best

@georgesky7690

3 жыл бұрын

Guys lower the pressure especially for dune riding. You want to have low pressure to leave a bigger print.

Please I have a question, does mine have 170 hours that oil should I buy?

@GLifeUTV

2 жыл бұрын

Links for oil kits in video description

At 500 the oil isnt even close to being burnt up are these recommendations just super safe to extend engine life or what?? Pretty lame the oil filter doesnt come with a 0 ring I found a copper crush washer at O ireland not a fan of the aluminium ones.

@GLifeUTV

3 жыл бұрын

I would somewhat agree and have been recommending 1000 miles per brp.. dealers have recommended 500miles im sure as a precautionary measure. Its not about if the oil is burnt up but if there is a metal particles from intial engine break in, that u may want to drain out.. On machines that gets somewhat abused. Its a piece of mind for many owners to give the engine this first service early.. In short I would say is oil is cheap.👍

@midgetShootingGunsAK

3 жыл бұрын

@@GLifeUTV I just heard that if you run them hard every 500 just like the break in not to go 1k is that just a rumour or is it recommended by brp recommendation?? Love your vids keep up the good work👍👍. I been doing it at 500 on my X3 but i am over 5k miles trying to go 50k plus and I try to ride it at least 3 times a week but the oil has never been burnt yet.

@dustyfarmer

2 жыл бұрын

I disagree, at 50 hours use of hard riding on my X3 XRC RR the oil is well on the way to breaking down and discolored, oil is cheap, engine rebuilds are not. I do mine every 50 hours.

@midgetShootingGunsAK

2 жыл бұрын

@@dustyfarmer How hot does your engine get up to and what temp does your fan kick on. I have a tuner kicks the fan on earlier at 195 think stock is 200? My oil is never burnt. But I take her easy until after I have completed the first fan cycle then I giver the ump

@dustyfarmer

2 жыл бұрын

@@midgetShootingGunsAK My thermo fan runs quite a bit especially after a few hot laps around my place or rock crawling in low as there is little air-flow through the radiator. I did an oil change the other day & the oil was 58 hours old and looked like it was well past it's prime although I could still see through the stream as it was coming out & the filter was brown. it had the color of brown beer rather than light honey gold when new. I too wait until the engine is warm before I give it the boot.....most times.

If u buy that oil kit on Amazon it comes with 4 bottles how many should I put

@GLifeUTV

2 жыл бұрын

3.4 quarts

@markmem1234

8 ай бұрын

3.7

Thank you for this video. Now do you think its worth the money for these machines having to do this much maintenance? I can't justify paying the asking prices for these and having to do so much maintenance on these things. It's makes 0 sense to me. This is also probably why so may are for sale so early on after purchase. Not trying to be negative, Looks like you enjoy this which is great.

@GLifeUTV

Жыл бұрын

These are performance machines. The level of shock the drivetrain receives from off-roading is not like your typical on road car.

@adamking4347

Жыл бұрын

Bought my 1st maverick in 2014 and then my x3 turbo R in 19. Got about 20 machines I ride on amd off with. Nobody's ever sold, except for when they are upgrading to a new machine

Axle and diff. Need changed at 500 hours

Taking it to the dealer for service on yields you $1300 less in your bank account😅

Dudes extra tire is flat AF 🤦‍♂️😂

@GLifeUTV

2 жыл бұрын

Hahah. It was. Hes upgraded since. This is actually mean machine

Oil in oil filter possible meanings??

@GLifeUTV

Жыл бұрын

In air filter? Excessive blow by. A catch can will help

@aguilarethan

Жыл бұрын

@@GLifeUTV sorry yes I’m air filter, is it bad to have this? It’s my first car that’s new to me

@GLifeUTV

Жыл бұрын

@@aguilarethan It's not uncommon. Normally a cash can will take care of it. If it's alot then it could be another issue

Cash or finance a cam an ?

@GLifeUTV

3 жыл бұрын

for oil change??

@aliaspancho89

Жыл бұрын

Cash

I like how people think they are helping the environment because they are using biodegradable degreasers. Just because what you use to clean off oil and grease is environmentally friendly it doesn’t make the oil and grease non hazardous. It’s still a good video I just think it’s important that people aren’t lead to believe that it’s okay to wash all the hazardous substances they want down the storm drain because a company claims their product is biodegradable.

@GLifeUTV

9 ай бұрын

All i said was its biodegradable cuz its on the bottle .. The stuff works that's all. I definitely wasn't thinking about the environment🤣

That oil filter design wasn't well thought out.

@GLifeUTV

2 жыл бұрын

Do you mean because of how oil spills when removing cap? If so its actually a good design feature in my opinion, prevents dry starts, oil is always in the oiling system and doesnt drain down. But yea does make a mess.. i think the oil drain wasn't well thought out and makes a mess if not carful

Look at your owner's manual....

An oil change shouldnt be such a pain in the ass. Thanks BRP you screwed your customers again by engineering a complete nightmare to service. Just got a 2024 Can am and its the worst machine I have owned out of all the sxs's Ive had. Polaris was leaps and bounds easier to change the oil. The winner was the Kawi, changing the oil was so accessible and easy it was done in literally 8 minutes. FU Can Am! never again.