Thanks for showing how to torque it and listing the torque specs!

@JLPicard440

3 ай бұрын

You're welcome! So glad to help.. 😊

Thanks for the video. It helped make replacing the belt much easier. Strange thing is that the belt is still very loose when supposedly under tension. Any ideas on how to fix that?

@JLPicard440

4 күн бұрын

HI... so if the clutch is out the belt should have some tension on it. Of course not like a guitar string, but snug.. If it seems really loose there are 2 possibilities.. 1. The belt is the wrong size. 2. Is it routed wrong?

Very well put together. Great video.

@JLPicard440

2 ай бұрын

Thank you kindly! I really appreciate it...

Very Well Done......Great Video..!

@JLPicard440

Ай бұрын

Thank you very much!

@GeorgeDalton-lb1ie

Ай бұрын

I need the omr

@JLPicard440

Ай бұрын

@@GeorgeDalton-lb1ie OK

Hello very helpful but my problem is I replaced my drive transmission with one off a Jon Deere and I'm having a problem putting everything back together. I get the concept but I'm missing something I think the little spring on the brake side. I can't seem to figure out the tension pulleys.

@JLPicard440

16 күн бұрын

HI! That's something I'd have to see. You've changed the whole setup.... I'm sure it'll work, but might require something to be modified or fabricated...

Thanks for any help you can give me it would be greatly appreciated

@JLPicard440

16 күн бұрын

Are the new drive axles in the exact same place as the old ones? Same size pulley, etc? If so you should be able to set it up close. I don't know if the same belt will work though unless it's within an inch of the same place...

😁

Hello Friend, the Amazon link you provided for the drive belt is not for the 54" Mower. Please check to verify. Thank you.

@JLPicard440

28 күн бұрын

HI, It was probably for the particular model number I had? I don't have that mower anymore so I can't look it up again...