How To Replace The Valve Cover Gasket On A Honda Civic With 1.7l Engine
Автокөліктер мен көлік құралдары
Brian Eslick from How to Automotive www.howtoautomotive.com takes you step-by-step through the process of replacing the valve cover gasket on a 2001-2005 Honda Civic with 1.7L engine.
Affiliate link mentioned in the video for Fel-Pro VS50606R Valve Cover Set amzn.to/2CvT8ns
Affiliate link mentioned in the video for Permatex 85144 The Right Stuff Grey Gasket Maker, 7.5 oz. amzn.to/2vjuCQZ
Affiliate link mentioned in the video for Milwaukee 2552-22 M12 FUEL Stubby Cordless 1/4" Drive Impact Gun Wrench Kit amzn.to/2T3E1sr
New! How to Automotive T-shirts, stickers, and more! Click the link: teespring.com/stores/how-to-a...
Affiliate link mentioned in the video for How to Automotive's Tool Store www.amazon.com/shop/howtoauto...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive #AutoRepair
Пікірлер: 82
One of the best DIY vids on the subject - no unnecessary talking, no unnecessary video, no unnecessary ugly face closeups. Thanks Brian!
how deep are the spark plugs. I wanna know if my tool is good enough for this job cause I also have to change them all
Great vid man keep em up i saved lots of $$$$$ and i also know how to do it now ......
What’s the 10mm bolt pattern
Good tutorial
wow, it seem pretty easy. I think I can do that myself. I kind of have all the tools. Only if I can find the valve cover kit I may be able to do it... outside.... in the cold... with no mirror xD
I went to take my tube seals out and they are completely rotted. It just broke into a few pieces. There is still rubber in the top rim in the grove and the entire circle in the middle along the walls. Any suggestions on how to remove? Tried using flathead and hammer even a box cutter blade to remove from the grove at least and nothing.
@donaldhedrick2889
3 жыл бұрын
Mine were the same way. I tried cutting,tearing, scrapping but in the end I did exactly what he said and used a small flat head screw driver tapped it down with a hammer and pried them right out.
Great
DO NOT put the wiring harness on before you install and tighten the valve cover bolts. You don't want anything that can pull the cover out of position before the bolts are tightened.
Good
@HowtoAutomotive
4 жыл бұрын
Steaven tuang thank you!
No sealant on the gasket? That’s the only thing I’m confused about
@andrewm.4168
Жыл бұрын
Just in the corners of the arch where it goes over the cam...
Just did that exact job on the same exact same car a couple of week ago.
@HowtoAutomotive
5 жыл бұрын
Nice overall it’s a pretty easy job👍🏻 thank you for watching!
@Longtrailside
5 жыл бұрын
@@HowtoAutomotive It is, just have to watch the tube seals from rolling, other than that easy peasy.
Ok second cylinder coolant xF
Change title to "2001".
You MESSED UP, buddy, you SKIPPED showing how you carefully press in the GASKET into the groove of the valve cover. THUMBS DOWN!!!
Where did u get the gasket…