How to replace the radio in the Volvo XC90
Автокөліктер мен көлік құралдары
In this video we take you though the steps to replace the radio in a XC90.
parts and tools used
dash kit
amzn.to/2joCuy2
wire harness
amzn.to/2joyE7U
antenna
amzn.to/2joBHx6
tesa tape
amzn.to/2irNnQd
panel tool
amzn.to/2jmDTWh
air saw
amzn.to/2joo4hg
Пікірлер: 331
I'm actually glad I watched this. For a moment, I thought of doing it myself.
@stevefels5608
2 жыл бұрын
100% agreed
@dimeclipent
Жыл бұрын
😅
@jarrettanglelockettcarter6173
4 ай бұрын
😅
Dean, the amount of meticulous detail that you put into your installs is absolutely amazing. I've been dealing with car audio shops in one form or another for years and have never seen the detail put into the installs compare to yours. Keep up the great work and thanks again for all of the great videos.
@FiveStarCarStereoInc
7 жыл бұрын
Rob Meyer that is very kind of you to say, thank you. Will do!
Great work 100% professional installation It's a shame that there isn't many installers like you left Thank you for the great videos Helps me out all the time
@FiveStarCarStereoInc
7 жыл бұрын
John Perez now I feel old,😁 thank you
Absolutely incredible! I love doing car audio installs, and I don't know that I would have the patience for that. Great work!
@FiveStarCarStereoInc
7 жыл бұрын
Casey Friday thank you, person pride is the driving force.
@bossman2873
2 жыл бұрын
@@FiveStarCarStereoInc I got curious and took the button paddles off each side and just fitted screen section with the 2 connectors and no trouble lights, Thank you.
Excellent video. I might add, having worked on mine and others for some time: the console cover, grey around the gear shift "snaps" on to the wood trim panel with clips. You just reach under and pop them sideways, 4 of them, and the wood trim panel comes off very easy, this getting it out of the way . I referenced your video while installing a double dinn in my XC90. (:) Thumbs up
@alextasker5221
3 жыл бұрын
Thanks for the info! Installing double din tomorrow and will keep that in mind too.
@CliffordGraham
Ай бұрын
Which double din did you use?
When he started it was bright outside...finished it was really dark. This looks like a job, but then when is it not? I'm up for the challenge. I was going to custom make the plate like I did on a '97 Honda Accord I did a year ago...and that was quite a job, but with this one, I'll use the aftermarket plate. Seems a log easier. Looks like plenty of room on top. I'm putting a light-bar on top my xc90 and that pocket looks like the best place to put a few switches to operate the thing. Thanks a million for making this video. Without it I would have gone mad, because I looked at the amp earlier to see the YAW control module (thank goodness there was no water there) and looked at the amp and thought, holy cow, this has to be re-wired. This video shows how to do it without any trial and error and without messing with the internal wiring and computer sensors, etc. I love KZread tutorials! I feel like it's cheating!
Hi. Firstly, great video. secondly, wanted to thank you for the detail in the video: I'm actually taking my XC90 back to a stock radio. It honestly looks like ferrets have been living behind the nasty 3rd party headhunt that's in the car at the moment. Wires have been spliced into, there's 3rd party boxes everywhere, I've removed GPS, a speaker and a mike that wasn't actually plugged into anything! You video has allowed me to work out how much work needs to be done to take it back to stock (sourcing a loom between the amp and the headhunt). So, again, thank you for the meticulous detail!
ottimo lavoro....buen trabajo!!
You made that huge job look easy. Thanks for the video.
@FiveStarCarStereoInc
7 жыл бұрын
Duncan Kim haha, thank you
Thanks for the video I though I would have to run wires down to the amp. You guys saved me a ton of time, i'm so grateful. For saving the factory radio, All you really need is board that the wires plug into, you can remove the display and all the buttons from the board and won't get any lights, windows and sunroof still work. so all you have to shove in the bottom of the dash is the little board. I used a metra window antenna very similar and it worked well. Made it feel like a new car with all the new features.
@FiveStarCarStereoInc
6 жыл бұрын
+Brian Hickman cool thank you for sharing your information to us, will definitely make the next one easier. Enjoy your new tunes
@user-rf4sg2qc2t
6 ай бұрын
Will the heating system also work then?
Very professionally done! Excellent work! These Volvos have either 8-speaker or 12-speaker (premium). The after market head unit usually has 4 channels - FL, FR, RL, RR. Except for the central speaker (in the premium version) can you confirm the rest of the speakers are all working? I have the 8-speaker systems. The front door has 1 speaker + 1 tweeter. The rear door has 1 speaker and there is one speaker in the trunk where the seat belt for the third row is. Just want to make sure all 8 speakers will work with the aftermarket radio. Thanks!
I was excited by your video to replace my 2003 Volvo XC90 radio with a double din radio, as well as the speakers. Wow, what a job this is to upgrade the speakers and wire up the radio, with Nav, Backup camera, etc. I don't know if you've done a replacement with a double din, with the bells and whistles, but it's not easy. The speaker rewiring is a task by itself. It would have been great to have the details of a double din replacement, to hook up car speed input, and parking brake, reverse, etc. Please respond if there's more help, or another source that would be helpful.
Good Lord... That's a lot of work! Thx 4 sharing... I velcroed a JamBox Big on top of the dashboard of my 2005 XC90 to get some Bluetooth ... Been working for years though I doubt it passes Volvo safety standards ;)
it was a hell of a job, mine had no iso standard connector, i had to resolder everything, but without this awesome vid i couldnt do it. Thank you
Nice man!! Great Video! I used some click-in conversion cables that prevented me from connection everything manually. So combined with your video This was very very simple!
Master level work! I hope you get paid really well for what you do. I'm glad I watched this though as it illustrated exactly what I do not want to do (or have done to mine). I'll keep looking for other options to have bluetooth music and phone functionality. But again, you are an artist for sure!
When you do this install what did you do with the plug that goes into the back of the cd player? Do you just tape it up? I see that the two from the radio stayed plugged in and wrapped up in blue tape. thank you.
Thank you very much for this fantastic video! It saved me having to pay $85 an hour at an estimated 3 hours.
you guys are the best i have seen on the internet, Boss moves.
@FiveStarCarStereoInc
7 жыл бұрын
youvids9820 thank you very much.
Great job I love this video very nice and clean. I have a quick question for you ,Do you know what color is the 2 wires from the steering wheel control ???? Somebody said the green is the volume and white is the track but didn't work in my Volvo.......
Great instructions, I will be trying this tomorrow. Thank you!
Awesome stuff, very helpful but I also replaced the stock amplifier with an aftermarket pioneer 5ch amp.
@robbiewilson157
2 жыл бұрын
did you put the amp back in the stock location? seems like a great idea. also if its a 5 channel did you get the center speaker to play as well?
great job guys...thanks for your time making these videos
@FiveStarCarStereoInc
7 жыл бұрын
Adam Geggatt thank you for watching them
Ok, loved this video. Oe question though, what happens to the parking assist feature that usually blinks on the panel replaced by the stereo?
@elim8322
2 жыл бұрын
I'm wondering about that too
god i love videos that give me information worth having less than 10 seconds in!! Thanks for the video helps a ton!
@keithgreen7390
4 жыл бұрын
and you linked the kit !! youre the man !!
As a side note, you only need radio plugged, in, not the switch modules on either side, so they can be separated from radio board.
Hehe you have great talent it's great that you share it around Looking forward to see more videos Any alarm installs coming our way in the future
@FiveStarCarStereoInc
7 жыл бұрын
John Perez no on the Alarms, DEI aka Viper has a channel. We do not do a lot with Alarms anymore.
Super job! I I am in the process of putting a JVC double din in my daughter's XC90, what do you do with the fibre optics cables that go to the CD player? Since the CD is now redundant I do not want to get the car 'mad' at me and throw a warning light fit.
Thank you for this video , I am thinking about getting a Volvo, I am going to make sure I get the premium sound system.
@FiveStarCarStereoInc
7 жыл бұрын
TTacoma haha right
Excelente video y muy profesional !!!! Gracias por compartir tu conocimiento.
Do you have to set the stock board to aux or anything?
I just picked one of these up for my wife. This will be perfect if we ever want to add functionality to the car's audio. Thanks!
@FiveStarCarStereoInc
6 жыл бұрын
+liquidflorian cool enjoy the new ride
Hi, maybe an unusual question bit are there ant units you can bud and just attach to the existing wiring?
Incredible video. You do good work.
Your video was 100 percent on. I forgot to disconnect the battery and got all kinds of lights on. Hopefully they clear. If I ever have to change this head unit I am going to sell the car instead. What a chore
I'm installing a double din after watching your video. I don't intend to use any of the factory parts, replacing the amp, speakers, running all new copper wiring, so what do I need to do other than reconnect the factory amp and connect the original 3 main pieces that I shouldn't get rid of. I also got the wiring harness that you recommended at the end instead of splicing, but not sure why I need it since not using any of the factory parts. I need you to clarify for me the other connections, i.e., getting rid of fiber optic connections, connecting reverse line, mute (lower volume), brake switch, and rear camera. I intend to get power from an always on source, and a ignition switch on connection (if I need to do that). I'm trying to get this done by 17 Oct '20. Help me Obijan.
Great video thanks, wish I lived anywhere near you so you could do mine too.
dude. I found a 2007 XC90 w 58k miles for 6k in top shape and i am about to pull the trigger, has 7 seats and from what I can tell is a reliable car and i am rolling a toyota solara w 320 k miles on it so would be upgrading the stereo for sure. Whats the estimate / cost and going for a double din w reverse camera etc . and why would we lose the center channel? lemme know, yall videos shares so much insight i really appreciate you guys sharing this insider detail even though know it may feel easy although intensive i know 100% i would F it up if i tried myself.
Dean , i have every thing needed for the headswap...But, what would you use to retain steering wheel controls on an 08 Volvo XC90 i will be installing a Pioneer AVH-4800bs could you also send me the PDF ....a Huge thank you in advance
Awesome video, I was hoping you would go into the harness a little more though. What color is the illumination wire you used so the radio dims with the lights?
Hello great video, one question I have looked thought the comments but could see an answer. What about the steering wheel controls how do you keep them?
Amazing work as always. Great video.
@FiveStarCarStereoInc
7 жыл бұрын
Clint L thank you
Great Video! Amazon is out of the Wiring harness :( Any other place that you can recommend buying it?
Love the video man you really help me out ....... I was wonder if I could shadow you for a week ?
great video/tutorial!! Looks like a real PITA for such a basic radio upgrade.
@FiveStarCarStereoInc
7 жыл бұрын
Anthony B so true.
Nice work I don't want to know how much $ but I would like to know how many labor hours you charged for this install I must say it was very clean and professional keep up the good work
@FiveStarCarStereoInc
7 жыл бұрын
Kevin Braithwaite I believe he changes double standard rate. It's not to bad we have done 6 or 7 of them now.
@scripture4219
5 жыл бұрын
Five Star Car Stereo so how much would it cost for him to do it ?
nice work. thank you. one question... which wire is the illumination wire?
One other question, where did you attach the ground wire for the antenna.
I like this I wish you are close to fix mine. Neat job ✅
Nice video Thank you so much for that Great information I have one more Big favor to ask ........................ Drum roll ................... How do I find ..... and .....replace all the speakers in my Volvo 2008 XC-90?
You said you have PDF instructions for this? How do I get them?
Update to my last post, as i have some decent diagnostic software i thought i would see exactly which parts of the original radio need to be still connected, (and i struggled to find room to squeeze the whole lot in behind as you have done) So it turns out the only part that needs to remain plugged in is the centre part with the display, you can unplug and leave out both side parts with the buttons on, they can be a but fiddly to plug back in, patience and a gentle push with a small screwdriver works. Just make sure they are the right way up, they are very small ribbon type plugs.
@robbiewilson157
3 жыл бұрын
hey i have a factory 'premium sound' radio system and it has become intermittent. will this let me use an aftermarket unit? i am assuming the replacement radio does not power or utilize the factory amp at all.
@brettknibbs9351
2 жыл бұрын
@@robbiewilson157 that issue is usually the icm itself or another part of the most loop that is not functioning correctly. vida would tell you which part. that part needs to work right or your stereo would still be intermitant
Looking at installing an Alpine Halo 11 in my 2010 XC90.... is there anything I need to look about for? Is my Volvo capable of interfacing with OBD and Maestro for on screen vehicle data on the display... and am I completely nuts for attempting this?
Sheer insanity, but fantastic video and skills. A friend is about to buy a 2009 and an installer refused to do the stereo upgrade job. I've been telling my buddy we can do it ourselves. After watching your video I'm absolutely scared but up for the challenge. Don't know how my friend is going to feel after watching your video. Guess I better learn how to solder!
@klozher38
5 жыл бұрын
did yall do it! , if not what was the alternative
Thanks man, got mine hooked up by following this!
Where in the world did you learn all this? There's installing and then there's these guys. Great professional service.
@FiveStarCarStereoInc
7 жыл бұрын
Trapperjohn1000 thank you, I have been an installer for 27 years. That is to say I got my first pay check for work in a shop ( not under a tree) in the summer of 1990. Man I feel old. Thanks for watching!
What wire would be used for back up cam on a double din install
Well, you really did a great job. If I understand correctly, you leave everything in the car and you just need pretty much the speakers and power for the new stereo right? Well, you are saying that you loose the center speaker because normal car stereos do not have more than 4 speaker connections. Now how about if you leave the old system up and running just hiding in the "underground" would it be possible that you can leave the center speaker connected to the old system and you can keep all your car beeps like PDC warnings, seat belt warnings and such thru this center speaker?
@elim8322
2 жыл бұрын
That's a really good idea. Keeping the original warnings, especially the reverse sensors, is important to me.
Did the same to my wifes 06 couple days ago. But i didnt mess with the amp i just splice the wires from behind the radio.i installed a double din with back up camera its a pita .dont splice the wires for the cig lighter for power theres three wires you have to disconnect from a harness with a fiber optic that you can use so the radio can keep its memory.
Love this video. Thank you. I am actually buying an xc90 this week. Your video has helped me with the few questions I had. By no means am I a professional but I have been doing my own stereos for myself on a dozen or so cars. But this will be my first euro so I was concerned. Did not catch it in the video and am struggling to find it on my own but were you able to make the steering wheel controls work with the aftermarket unit? Thanks guys
@FiveStarCarStereoInc
7 жыл бұрын
RALLIART15 this customer did not want them but the Metra makes one. Go here axxessinterfaces.com/vehicle-fit-guide
@RALLIART15
7 жыл бұрын
Five Star Car Stereo thank you for the reply
@robertstephenson5630
7 жыл бұрын
I just did a simple install on an XC70 with an ASWC-1. Volvo's illumination circuit is on the CAN bus and the AXXESS unit does not provide for that. Steering wheel controls work fine. If you want the radio to dim with the headlights, you need a more capable CAN bus module, like the InCarTec.
@karimmaldonadocabral7114
5 жыл бұрын
@@FiveStarCarStereoInc hi i checked with metra and the one they make says it fits 2007 not 2008 do you have any experience with those? should i just take the risk?? Thanks
i have installed systems in at least 15 xc90's but not once have we used the oem speakers. have you guys ever had issues with them being 2 ohm? here in memphis i automatically assume (i shouldn't but i do) its a premium car so change the speakers also. you did an amazing job i enjoy your videos. i manage a family owned shop in memphis, tn Stere One . keep up the good work
@FiveStarCarStereoInc
7 жыл бұрын
Eldridge Henry, II thank you, no we have never had a problem with the speaker. Most of the installs on these keep the factory speakers just like this one.
04 Volvo S60 T5 looking for complete radio harness to retain all controls and no fault light to come on. Going to be installing a DDX995 with all the gadgets. any help? thanks
Excellent, شكرا من الجزائر
Any reason you are plugging the amplifier back in? If the speaker wires aren't connected to it, wouldn't it not be powering anything?
Do all xc90s have the fiber optic wires because I have a 06 xc90 without factory navigation
Im doing the same for my 99 s80. I saw that grey connector and mines has numbers on them and i dont know what they mean. Can you tell me what speakers are related to the numbers
It was a very good tutorial couple things to point out it's that the way did Dim is going to see in a Volvo XC90 you are going to have a hard time during the day to see the screen because of the angle is sits I know these because I have it done in my car and I do miss my stock radio and I also do miss the center speaker is there is no channel for it to go to
Does anyone know if this process will work for my 2008 S80? I hate to pull the entire blower out just to replace the resistor. Thanks for the video!
Great video, thanks for posting. Do you have instructions for installation with the Carav wiring harness?
@FiveStarCarStereoInc
7 жыл бұрын
Mark Mills sorry no, I did not write them down yet.
I just watched your video and what I want to know is can you install an amp and subwoofer
They now make a wiring kit with direct plug in harnesses that plug into the factory harness, so no more cutting. They also have an antenna adapter that allows you to keep the factory antenna, as well as a wiring kit to bypass the factory amp and still utilize the steering wheel controls with the aftermarket stereo. I was looking into install kits earlier today because the factory stereo doesn't even turn on, hasn't since I bought this car a few months ago. I bought a decent bluetooth speaker to get by using the music on my phone, but it just doesn't have the same sound quality as an actual set of speakers, so I decided to finally get another stereo for it, and had to look into install kits to make sure it was doable, because I heard somewhere that alot of people couldn't replace the factory unit due to no install kits being available, but now I found out they are, so that's a relief knowing that I can put a nice system in here. While I was looking into the install kits I found all the other goodies that make the swap so much simpler.
@robbiewilson157
3 жыл бұрын
where did you find these adapters? thanks!
@elim8322
2 жыл бұрын
I'm also wondering about these, thanks!
Is the wire harness specific to the replacement stereo or is it universal?
hi. can the steering wheel buttons also be connected? what cables must be connected?
I have done the job and the radio works. I didn't look for any steerwheel connections. I used the purple wire from the cigarette lighter but there is no permanent voltage on it, so I can't use this one to connect acessory or yellow wire. Can somenone tell me what other cable I can use?
I want to change my stock radio but my stock radio don't turn on at all so if I change it would I have power or not what can I do for the power I just bought it yesterday
I have a 2010 xc90. My wife loves the car, but hates its lack of Bluetooth. I had the upgraded sound system, which I love. Any easy and efficient way to add Bluetooth so it plays into car speakers? Or is a new head unit required?
What color r the speaker wires because I want to keep the factory radio
Have ? What about the parking sensors does it still work
Hi would you have a video install for a Volvo v50
Is there any way that you can keep the center channel? Awesome video, yours is by far the most professional and enjoyable to watch!
@FiveStarCarStereoInc
7 жыл бұрын
matt feith thank you. Using just radio power no. It would give you a low ohm load on whatever channel you put it on. If you add something like the Pioneer GM -D1004 you could. The amp could power the 4 speakers and the radio could power the center channel. You could mount the amp where the factory amp is located and use the factory amps power to feed it.
Nice job
Thanks for the video. I have a 05 XC90 and put a 4200 NEX in it. Following this video. Only question is where did you ground the aftermarket antenna at? I did not see that part in the video.
@CDdogg303
3 жыл бұрын
You can ground in many different areas. Either use an existing bolt or nut or use a self tapping screw/hex head and drill it in any where you want
Will the harness work on a 2006 Volvo XC90?
So how many plugs go in new radio 🤔🤔 got one of these. Cars with a nackered CD
thanks for putting this together! I hope you can answer this for me... will this also work for my 07 xc90 that has the factory navigation system?
@FiveStarCarStereoInc
7 жыл бұрын
Jorge Heredia sorry, I have never done the navigation radio.
@jorgeheredia754
7 жыл бұрын
Sorry let me try the question again. my xc90 has a factory navigation system where in the Volvo in your video has the center speaker. I'm not wanting to do anything to that part, just add a double din where the factory radio is now. Will the way you showed on your video still work? thanks for the reply!
Great video 👍
great vid! a couple quick questions though. are the speakers now only powered by the head unit and not the amp? and if so, would an Alpine power pack be sufficient?
@FiveStarCarStereoInc
7 жыл бұрын
Cook White yes they are not on the amp any more. Yes a power pack would work great!
@cookwhite13
7 жыл бұрын
Five Star Car Stereo awesome! thank you!!
Great video, thanks
Does this work with the existing fiber optic system? Great video by the way. You gave me everything but the kitchen sink!
@FiveStarCarStereoInc
7 жыл бұрын
+Darien Mathis you have to Bypass fiber amp
@00jonyb00
7 жыл бұрын
How do you bypass the amp? It's fiber optic in, correct? Have you used the Crux Radio Replacement?
I didn't catch that, why was the factory antenna unavailable? And what was the reason the center speaker had to drop out too?
Would anyone happen to know where to get the wiring adapter? The Amazon link says not available.
I just did 1 and the factory amplifier was not reconnected to any of the wiring. The new wire harness connected directly to the factory amplifier wiring plug for plug minus the fiberoptic cable. It was ran the same way to the dash and had the wiring to connect the aftermarket head unit and steering wheel controls for a double din. Was not to bad other than the passenger seat didnt work for the power to move it so had to remove the seat to do the installation. Long process to do these vehicles.
Thank you very much for the video. It saved me lot of time. I followed the instructions but i am having issue with fm transmission. There is lot of noise and only getting 2 fm stations. How do i fix it?
@CDdogg303
3 жыл бұрын
Sounds like you either did not install the antenna or it is not plugged in all the way
@CDdogg303
3 жыл бұрын
Or maybe you did not ground the antenna properly
What gauges are the yellow and black wires that you use to bring the power up from under the seat? And are they stranded or solid? Thanks for making your videos, they are really helpful!
@FiveStarCarStereoInc
7 жыл бұрын
+Dan Reed it iS a stranded 18awg wire
@lickshoe2004
7 жыл бұрын
Five Star Car Stereo thank you!
Wow! I didn't realize how labor intensive this was. lol. I will definitely be paying to have this done. So can I purchase any car radio? or does it have to be a certain size?
Just FYI you can remove the controls to the left and right of the original display screen and it won't cause any errors on the dashboard.. much easier than trying to tape them all up and find space to squeeze it into!
nice!!!!
Can anyone confirm that if my factory radio is non-functional this would work to install an aftermarket unit? I am dubious that the wiring for the amp etc would work correctly. or is this a complete bypass of the entire amp and fiber optic cable system?
Hi its any chance replecement bulb in a xc90 radio ,? It's doesn't lights few parts of radio
Does anyone know if this will work if the icm is faulty,have a radio that powers in when it wants