how to replace the starter on 2008 2012 honda accord 2.4l starter removal replacement
Жүктеу.....
Пікірлер: 88
@LukeAMcDowell Жыл бұрын
Thank you so much for making this video! My wife’s car wouldn’t start while she was running errands, and I had to replace her starter in the Target parking lot. Great job mentioning all the tools I would need. You made it much easier. Muchas gracias mi amigo!
@JM-AUTO
Жыл бұрын
im glad you did a great job and thanks for visiting my channel.
@randywinals19462 жыл бұрын
Thank you. Your video walked me right through changing starter. Hope more people will use this when needed. Saved me a few hundred dollars...
@JM-AUTO
2 жыл бұрын
im glad you did a great job and thanks for coming to my channel.
@richardandrews5120 Жыл бұрын
10/11/22 Replaced my starter by watching this video..and this was by far the best step by step tutorial I’ve seen on here yet..Thanks for the video dude…GOD BLESS!!!
@JM-AUTO
Жыл бұрын
thanks for your comment and also for coming to my channel, and God bless you and yours as well.
@darryljenkins3560 Жыл бұрын
Really appreciate this video. I'm going to have to do this soon and it is great to have a reference. My confidence went up about 80 percent.
@JM-AUTO
Жыл бұрын
and I really appreciate you coming to my channel and im glad you 'll do a great job
@GeraldMckenzie2 жыл бұрын
Thank you for making this great how to!!! Saved me from having to take it to the shop. Did it myself!!
@JM-AUTO
2 жыл бұрын
thank you for such a beautiful comment and im glad you did a great job.
@msjigglypuff912 жыл бұрын
This was a great “how to” video. I got my starter changed today at home! 😁👏🏾👏🏾
@JM-AUTO
2 жыл бұрын
thank you and im glad you replaced your starter, great job.
@ParadymeFlux Жыл бұрын
Dude you are a life saver! My gf and I followed the process step-by-step and it went perfectly! Also learned a massive amount about our car, and had fun while doing it - THANK YOU!!! To help others diagnose: Our car was struggling to turn over for months, would try to start the car and the car would make "whirring" sounds. Would often turn over on the 2nd attempt. A week ago it got worse suddenly, only turning over on the 6-7th attempt. Later that day it completely stopped cranking when trying to start, only the relay would click. After replacing the starter motor, now our baby starts first pop with no troubles. Some advice for others like us with no car knowledge: Give yourself about 3-5 hours for the job, we used numbered sticky tapes to label everything we unclipped as we went, which made it way easier to clip everything back together afterwards. For our car, every bolt was able to be loosened by the world's tiniest ratchet EXCEPT the 2 bolts that held the starter motor in place - we needed a torque wrench to loosen the bolts (and apparently you are meant to use a torque wrench to retighten the bolts too (45nm for the back bolt and 68nm for the front), so make sure you have one on hand. Also, be mindful off the tubes with coolant in them - when my gf was re-attaching them, the coolant poured out which then flicked up straight into her eye (lol)
@JM-AUTO
Жыл бұрын
im glad you had fun doing a great job, appreciate you visiting this channel too.
@mi5veezee2 жыл бұрын
Thanks bro. Rebuilding mine next weekend ill be using your video. Thank you.
@JM-AUTO
2 жыл бұрын
ok cool, and thanks for commenting on my channel and God bless you and your family
@southeastempire43tv Жыл бұрын
I’m gonna try this tomorrow. Looks like it’s easy to follow
@fixurup52062 жыл бұрын
Great video - worked great for my 2011 2.4 with one modification. The manifold bracket is a bit different so the bottom bolt is located further down but still a 12mm on mine. Everything else seemed to be identical to the video. Started right up - Thanks again
@JM-AUTO
2 жыл бұрын
im glad you did a great job and thanks for coming to my channel.
@tahjbrown7106
3 ай бұрын
Is the manual transmission starter the same as the automatic transmission in the 2011 honda? I have a 4 cylinder 5 speed and have to change my starter
@neeztrust49392 жыл бұрын
This was really appreciated saved me 400$
@JM-AUTO
2 жыл бұрын
im glad you saved and thanks for coming to my channel.
@joelscott2468 Жыл бұрын
Thank you for this video I was about to go to Firestone but you save me some money
@JM-AUTO
Жыл бұрын
im glad and thanks you for visiting my channel.
@robertobetancourt7881 Жыл бұрын
Thanks brother I really appreciate , great video God bless you !!
@JM-AUTO
Жыл бұрын
thank you so much, I also appreciate your comment.
@bryanst.martin7134 Жыл бұрын
Gotta help a neighbor, good preview, Thanks!
@JM-AUTO
Жыл бұрын
thank you I really appreciate it.
@franciscomarquez572 Жыл бұрын
Thank you !! You save me time !! 😅👍🏼👏🏽👏🏽👏🏽👏🏽
@JM-AUTO
Жыл бұрын
thanks for visiting my channel.
@hungoto37612 жыл бұрын
Great job boss
@JoseHernandez-nr3pd Жыл бұрын
great video.. thank you so much
@JM-AUTO
Жыл бұрын
thanks for visiting my channel.
@kitchenenterprise3787 Жыл бұрын
Great job thank you
@JM-AUTO
Жыл бұрын
thank you.
@JorgeOrtiz-cy3dn2 ай бұрын
Thank you for this video gracias por este video es de gran ayuda😊
@JM-AUTO
2 ай бұрын
gracias gracias Amigo
@manuel90447242 жыл бұрын
Thank you I did and save my money
@JM-AUTO
2 жыл бұрын
im glad you did a great job and saved some money
@manuel9044724
2 жыл бұрын
@@JM-AUTO thanks for take your time and explain single step.
@Drip4Less_2 жыл бұрын
How did you remove the black thing near the hood latch @0:19 seconds into the video? The thing you removed directly after disconnecting the negative battery terminal
@JM-AUTO
2 жыл бұрын
ok that is part of the air intake duck tube and that is only held by 2 clips and I removed it literally in 5 seconds but it is under another cover.
@cmackscott76111 ай бұрын
If one were to pay a mechanic to replace the starter, which is more expensive, a starter replacement on a 4cyl model Accord or a starter replacement on the 6cyl model? Watching these starter replacement videos, it looks like many more things are in the way that needs to be removed on the 4cyl model. Is that correct?
@JC-ov5pt Жыл бұрын
Question… my starter has been grinding after starting on cold starts only but I bought new oem starter anyway. Then I read online it could be due to a bad vct actuator since no grinding when engine is warm. Also, car never had starting issues. But today cel, vsa lights turned on, running sluggish with P0339, P0300, P0302, P0303 codes. Should I change the crankshaft posn sensor or install the oem starter? Thanks.
@JM-AUTO
Жыл бұрын
if your accord is 2008-2009 2.4 you should go the dealer they my fix it for free, sohw them the codes and the other lights in the instrument cluster, now if you only have p0339 then you have to fix it on your own, they have a servise bulletin.
@JC-ov5pt
Жыл бұрын
@@JM-AUTO I only saw the Honda accord 80-12 service bulletin for V6 and it only extended warranty to 8 yrs. Anyway, i found a KZread video on how to relearn crankshaft pos sensor, followed it and it worked. No more cel and the engine runs smooth again. We still have that grinding noise after cold start so we should replace the VTC actuator as well. Do you recommend replacing it along with the chain or leave both alone? Ive read that the problem comes back even after replacing the chain. But I’m also concerned that the grinding will throw off the timing again and stretch the chain.
@JM-AUTO
Жыл бұрын
@@JC-ov5pt in my experience: every time i have replaced a vtc actuator, the rattle has not come back but some times i have replaced the timing chain at the same time, that will depend on how loose or tight the timing chain looks for me when i put the engine on time, when timing chain is fine it is hard to put the actuators back with the chain unless you take out the tensioner in the bottom, so you have to open it first before deciding to replacing it or not. if you have any other question dont hesitate to ask.
@JC-ov5pt
Жыл бұрын
@@JM-AUTO I’m not looking forward to replacing the actuator (and chain). But I appreciate the offer and will definitely contact you if we have questions. Thanks and Happy Holidays!
@zigzag4s Жыл бұрын
Hello there , Great video, we replaced the starter(from Auto Zone) on a 2012 Honda accord successfully. The instructions were straight forward and allowed us newbies to replace the starter. Everything was great in the beginning, the starter worked beautifully. However, last few days I can hear few additional revs before the engine starts. Any suggestions on what may be causing this ?
@JM-AUTO
Жыл бұрын
if it is duralast most likely is the starter, check that and let me know any thing, thanks for your beautiful comment.
@zigzag4s
Жыл бұрын
@@JM-AUTO Yes it is a duralast, Duralast Starter 19082 to be precise !!
@JM-AUTO
Жыл бұрын
@@zigzag4s yes the only way would be taking it out and get another one hope this helps. thanks again for visiting my channel I really appreciate it.
@zigzag4s
Жыл бұрын
@@JM-AUTO Thank you !
@Endoe.McKronic Жыл бұрын
damn!! thats crazy the starter is located there!
@JM-AUTO
Жыл бұрын
some guys at honda decided to put it there. thanks for visiting my channel.
@sv961811 ай бұрын
Can you tell me why after doing this my car would start then shut off like there is a kill switch or something? Starter is working great but it starts then turns off. Everything isn’t totally hooked back up just wondering if you think it’s that or something else?
@JM-AUTO
11 ай бұрын
install everything back and you should not have any issues because there is nothing in that area that can prevent the engine from running.
@tochimere5179 Жыл бұрын
Hello please help. My Honda Accord 2008 V4 cranks for long before start. What could be the problem. Most times during cranking it displays a key sign on the dashboard
@JM-AUTO
Жыл бұрын
if you see the green key while cranking then that might be the long crank, you should scan the immobilizer system for codes, eve though there are many other resons why a car can have a long crank but this one bight be your issue.
@dallaslouie10 ай бұрын
Hello what kind of cordless ratchet are you using, I need to buy me one.
@JM-AUTO
10 ай бұрын
hi, this is a 3/8 milwaukee cordless ratchet, thanks for sharing.
@producerdavona Жыл бұрын
Can you list the tools that you used?
@JM-AUTO
Жыл бұрын
yes I can, 10mm 12mm 14mm sockets, corless milwaukee ratchet, swivel adapter, pliers and flat head screw drivers, thanks for coming to my channel. and God bless you and your Family as well.
@jessicajimenez58532 жыл бұрын
This is my proyect at 5am!! Im not sure if im going to finish this by the time for me to go work.
@JM-AUTO
2 жыл бұрын
hi J, im pretty sure you will do a great job and finish before going to work,
@jessicajimenez5853
Жыл бұрын
@@JM-AUTO thanks for the reply!! I did it by myself and i finished 40 min before clocking in to work!! Im glad you did an awesome video!!
@Drip4Less_2 жыл бұрын
Is this basically the same as the 2012 honda crosstour? I can’t find a video on replacing the starter anywhere, not on KZread, not on google. Not even 1 video almost as if the car doesn’t actually exist
@JM-AUTO
2 жыл бұрын
thanks for your comment and sorry to hear that, now if you have the 2.4 it is going to be similar the starter still under the intake manifol in front of the engine but the crosstour is a different design, now if you have the 3.5 engine that is going to be similar to the honda pilot, hope that helps you a little bit good luck and God bless you and your family
@Drip4Less_
2 жыл бұрын
@@JM-AUTO yes I have the 2.4. Thanks and God bless you & your family as well
@djref0ne Жыл бұрын
Trying this once the rain stops.
@mkrp4 Жыл бұрын
6:05 As long as this is not new aftermarket starter it should be fine
@MrSamPhoenix Жыл бұрын
Why Honda WHY?!?
@BulletProofMMA_Locks2 жыл бұрын
How much labor cost
@JM-AUTO
2 жыл бұрын
thanks for your comment, between $100 and $150 for labor. stay bless you and your family
@mariarivas63772 жыл бұрын
Cuanto cobras por hacer ese trabajo.
@JM-AUTO
2 жыл бұрын
ola Maria como estas, pues mas o menos 125. gracias por venir a mi canal, yo deberas aprecio mucho eso.
@alejandroloya9514 Жыл бұрын
Where can I get the starter ?!
@JM-AUTO
Жыл бұрын
if you want the best, go for the one in the dealer (more money) but autozone also has good alternators, thanks for visiting my channel.
@bwarren36902 ай бұрын
not for older models
@JM-AUTO
2 ай бұрын
2003 2007 is almost the same, thanks for sharing.
@bwarren3690
2 ай бұрын
@@JM-AUTO I had an '04 and it looked different.
@Venzera Жыл бұрын
My car turns on now but dies immediately. I’m thinking it’s a fuse since I double checked hoses etc and charged the battery. Anyone else run into this problem?
@JM-AUTO
Жыл бұрын
first scan the vehicle to see if you find trouble codes so you start from there.
@Venzera
Жыл бұрын
@@JM-AUTO No codes showing up
@JM-AUTO
Жыл бұрын
check if the engine is getting fuel, also check for spark and compression.
@Venzera
Жыл бұрын
@@JM-AUTO Thanks I’ll look into that. As of now it’ll turn on and I can even rev it up for a bit but it shuts off within a few seconds.
@iraqtt Жыл бұрын
Saved me $600 in labor costs
@JM-AUTO
Жыл бұрын
im glad you saved some money and thanks for visiting my channel.
Пікірлер: 88
Thank you so much for making this video! My wife’s car wouldn’t start while she was running errands, and I had to replace her starter in the Target parking lot. Great job mentioning all the tools I would need. You made it much easier. Muchas gracias mi amigo!
@JM-AUTO
Жыл бұрын
im glad you did a great job and thanks for visiting my channel.
Thank you. Your video walked me right through changing starter. Hope more people will use this when needed. Saved me a few hundred dollars...
@JM-AUTO
2 жыл бұрын
im glad you did a great job and thanks for coming to my channel.
10/11/22 Replaced my starter by watching this video..and this was by far the best step by step tutorial I’ve seen on here yet..Thanks for the video dude…GOD BLESS!!!
@JM-AUTO
Жыл бұрын
thanks for your comment and also for coming to my channel, and God bless you and yours as well.
Really appreciate this video. I'm going to have to do this soon and it is great to have a reference. My confidence went up about 80 percent.
@JM-AUTO
Жыл бұрын
and I really appreciate you coming to my channel and im glad you 'll do a great job
Thank you for making this great how to!!! Saved me from having to take it to the shop. Did it myself!!
@JM-AUTO
2 жыл бұрын
thank you for such a beautiful comment and im glad you did a great job.
This was a great “how to” video. I got my starter changed today at home! 😁👏🏾👏🏾
@JM-AUTO
2 жыл бұрын
thank you and im glad you replaced your starter, great job.
Dude you are a life saver! My gf and I followed the process step-by-step and it went perfectly! Also learned a massive amount about our car, and had fun while doing it - THANK YOU!!! To help others diagnose: Our car was struggling to turn over for months, would try to start the car and the car would make "whirring" sounds. Would often turn over on the 2nd attempt. A week ago it got worse suddenly, only turning over on the 6-7th attempt. Later that day it completely stopped cranking when trying to start, only the relay would click. After replacing the starter motor, now our baby starts first pop with no troubles. Some advice for others like us with no car knowledge: Give yourself about 3-5 hours for the job, we used numbered sticky tapes to label everything we unclipped as we went, which made it way easier to clip everything back together afterwards. For our car, every bolt was able to be loosened by the world's tiniest ratchet EXCEPT the 2 bolts that held the starter motor in place - we needed a torque wrench to loosen the bolts (and apparently you are meant to use a torque wrench to retighten the bolts too (45nm for the back bolt and 68nm for the front), so make sure you have one on hand. Also, be mindful off the tubes with coolant in them - when my gf was re-attaching them, the coolant poured out which then flicked up straight into her eye (lol)
@JM-AUTO
Жыл бұрын
im glad you had fun doing a great job, appreciate you visiting this channel too.
Thanks bro. Rebuilding mine next weekend ill be using your video. Thank you.
@JM-AUTO
2 жыл бұрын
ok cool, and thanks for commenting on my channel and God bless you and your family
I’m gonna try this tomorrow. Looks like it’s easy to follow
Great video - worked great for my 2011 2.4 with one modification. The manifold bracket is a bit different so the bottom bolt is located further down but still a 12mm on mine. Everything else seemed to be identical to the video. Started right up - Thanks again
@JM-AUTO
2 жыл бұрын
im glad you did a great job and thanks for coming to my channel.
@tahjbrown7106
3 ай бұрын
Is the manual transmission starter the same as the automatic transmission in the 2011 honda? I have a 4 cylinder 5 speed and have to change my starter
This was really appreciated saved me 400$
@JM-AUTO
2 жыл бұрын
im glad you saved and thanks for coming to my channel.
Thank you for this video I was about to go to Firestone but you save me some money
@JM-AUTO
Жыл бұрын
im glad and thanks you for visiting my channel.
Thanks brother I really appreciate , great video God bless you !!
@JM-AUTO
Жыл бұрын
thank you so much, I also appreciate your comment.
Gotta help a neighbor, good preview, Thanks!
@JM-AUTO
Жыл бұрын
thank you I really appreciate it.
Thank you !! You save me time !! 😅👍🏼👏🏽👏🏽👏🏽👏🏽
@JM-AUTO
Жыл бұрын
thanks for visiting my channel.
Great job boss
great video.. thank you so much
@JM-AUTO
Жыл бұрын
thanks for visiting my channel.
Great job thank you
@JM-AUTO
Жыл бұрын
thank you.
Thank you for this video gracias por este video es de gran ayuda😊
@JM-AUTO
2 ай бұрын
gracias gracias Amigo
Thank you I did and save my money
@JM-AUTO
2 жыл бұрын
im glad you did a great job and saved some money
@manuel9044724
2 жыл бұрын
@@JM-AUTO thanks for take your time and explain single step.
How did you remove the black thing near the hood latch @0:19 seconds into the video? The thing you removed directly after disconnecting the negative battery terminal
@JM-AUTO
2 жыл бұрын
ok that is part of the air intake duck tube and that is only held by 2 clips and I removed it literally in 5 seconds but it is under another cover.
If one were to pay a mechanic to replace the starter, which is more expensive, a starter replacement on a 4cyl model Accord or a starter replacement on the 6cyl model? Watching these starter replacement videos, it looks like many more things are in the way that needs to be removed on the 4cyl model. Is that correct?
Question… my starter has been grinding after starting on cold starts only but I bought new oem starter anyway. Then I read online it could be due to a bad vct actuator since no grinding when engine is warm. Also, car never had starting issues. But today cel, vsa lights turned on, running sluggish with P0339, P0300, P0302, P0303 codes. Should I change the crankshaft posn sensor or install the oem starter? Thanks.
@JM-AUTO
Жыл бұрын
if your accord is 2008-2009 2.4 you should go the dealer they my fix it for free, sohw them the codes and the other lights in the instrument cluster, now if you only have p0339 then you have to fix it on your own, they have a servise bulletin.
@JC-ov5pt
Жыл бұрын
@@JM-AUTO I only saw the Honda accord 80-12 service bulletin for V6 and it only extended warranty to 8 yrs. Anyway, i found a KZread video on how to relearn crankshaft pos sensor, followed it and it worked. No more cel and the engine runs smooth again. We still have that grinding noise after cold start so we should replace the VTC actuator as well. Do you recommend replacing it along with the chain or leave both alone? Ive read that the problem comes back even after replacing the chain. But I’m also concerned that the grinding will throw off the timing again and stretch the chain.
@JM-AUTO
Жыл бұрын
@@JC-ov5pt in my experience: every time i have replaced a vtc actuator, the rattle has not come back but some times i have replaced the timing chain at the same time, that will depend on how loose or tight the timing chain looks for me when i put the engine on time, when timing chain is fine it is hard to put the actuators back with the chain unless you take out the tensioner in the bottom, so you have to open it first before deciding to replacing it or not. if you have any other question dont hesitate to ask.
@JC-ov5pt
Жыл бұрын
@@JM-AUTO I’m not looking forward to replacing the actuator (and chain). But I appreciate the offer and will definitely contact you if we have questions. Thanks and Happy Holidays!
Hello there , Great video, we replaced the starter(from Auto Zone) on a 2012 Honda accord successfully. The instructions were straight forward and allowed us newbies to replace the starter. Everything was great in the beginning, the starter worked beautifully. However, last few days I can hear few additional revs before the engine starts. Any suggestions on what may be causing this ?
@JM-AUTO
Жыл бұрын
if it is duralast most likely is the starter, check that and let me know any thing, thanks for your beautiful comment.
@zigzag4s
Жыл бұрын
@@JM-AUTO Yes it is a duralast, Duralast Starter 19082 to be precise !!
@JM-AUTO
Жыл бұрын
@@zigzag4s yes the only way would be taking it out and get another one hope this helps. thanks again for visiting my channel I really appreciate it.
@zigzag4s
Жыл бұрын
@@JM-AUTO Thank you !
damn!! thats crazy the starter is located there!
@JM-AUTO
Жыл бұрын
some guys at honda decided to put it there. thanks for visiting my channel.
Can you tell me why after doing this my car would start then shut off like there is a kill switch or something? Starter is working great but it starts then turns off. Everything isn’t totally hooked back up just wondering if you think it’s that or something else?
@JM-AUTO
11 ай бұрын
install everything back and you should not have any issues because there is nothing in that area that can prevent the engine from running.
Hello please help. My Honda Accord 2008 V4 cranks for long before start. What could be the problem. Most times during cranking it displays a key sign on the dashboard
@JM-AUTO
Жыл бұрын
if you see the green key while cranking then that might be the long crank, you should scan the immobilizer system for codes, eve though there are many other resons why a car can have a long crank but this one bight be your issue.
Hello what kind of cordless ratchet are you using, I need to buy me one.
@JM-AUTO
10 ай бұрын
hi, this is a 3/8 milwaukee cordless ratchet, thanks for sharing.
Can you list the tools that you used?
@JM-AUTO
Жыл бұрын
yes I can, 10mm 12mm 14mm sockets, corless milwaukee ratchet, swivel adapter, pliers and flat head screw drivers, thanks for coming to my channel. and God bless you and your Family as well.
This is my proyect at 5am!! Im not sure if im going to finish this by the time for me to go work.
@JM-AUTO
2 жыл бұрын
hi J, im pretty sure you will do a great job and finish before going to work,
@jessicajimenez5853
Жыл бұрын
@@JM-AUTO thanks for the reply!! I did it by myself and i finished 40 min before clocking in to work!! Im glad you did an awesome video!!
Is this basically the same as the 2012 honda crosstour? I can’t find a video on replacing the starter anywhere, not on KZread, not on google. Not even 1 video almost as if the car doesn’t actually exist
@JM-AUTO
2 жыл бұрын
thanks for your comment and sorry to hear that, now if you have the 2.4 it is going to be similar the starter still under the intake manifol in front of the engine but the crosstour is a different design, now if you have the 3.5 engine that is going to be similar to the honda pilot, hope that helps you a little bit good luck and God bless you and your family
@Drip4Less_
2 жыл бұрын
@@JM-AUTO yes I have the 2.4. Thanks and God bless you & your family as well
Trying this once the rain stops.
6:05 As long as this is not new aftermarket starter it should be fine
Why Honda WHY?!?
How much labor cost
@JM-AUTO
2 жыл бұрын
thanks for your comment, between $100 and $150 for labor. stay bless you and your family
Cuanto cobras por hacer ese trabajo.
@JM-AUTO
2 жыл бұрын
ola Maria como estas, pues mas o menos 125. gracias por venir a mi canal, yo deberas aprecio mucho eso.
Where can I get the starter ?!
@JM-AUTO
Жыл бұрын
if you want the best, go for the one in the dealer (more money) but autozone also has good alternators, thanks for visiting my channel.
not for older models
@JM-AUTO
2 ай бұрын
2003 2007 is almost the same, thanks for sharing.
@bwarren3690
2 ай бұрын
@@JM-AUTO I had an '04 and it looked different.
My car turns on now but dies immediately. I’m thinking it’s a fuse since I double checked hoses etc and charged the battery. Anyone else run into this problem?
@JM-AUTO
Жыл бұрын
first scan the vehicle to see if you find trouble codes so you start from there.
@Venzera
Жыл бұрын
@@JM-AUTO No codes showing up
@JM-AUTO
Жыл бұрын
check if the engine is getting fuel, also check for spark and compression.
@Venzera
Жыл бұрын
@@JM-AUTO Thanks I’ll look into that. As of now it’ll turn on and I can even rev it up for a bit but it shuts off within a few seconds.
Saved me $600 in labor costs
@JM-AUTO
Жыл бұрын
im glad you saved some money and thanks for visiting my channel.