This video turned out to be much more helpful than I thought it would at the start! 🤣Great descriptions! Great camera work! Minimal banter!

@PeaceLoveAndGuns

2 жыл бұрын

I'm glad it was helpful and thanks for letting us know!

Nice video guys. Great camera work and very thorough info . 👍

@PeaceLoveAndGuns

20 күн бұрын

@@billworboys6676 Hey, thank you for the very thorough compliment! We're glad it helped!

Just changed my starter, worked perfectly. Thanks guys! I would note that the wire aspect of it is likely the most annoying part. I had to bend the wire a little bit to actually get it to fit on properly again. It took me an hour just to work that part out. Otherwise the change is not super difficult. Make sure you guys fit the bottom bolt on first and then the top to make sure the starter is in place properly -- if the fitting is off, the wire bit won't get on properly.

Just finished the job and i can confirm that did, infact, have a bad day

@PeaceLoveAndGuns

Ай бұрын

Oh noooooo! I'm sorry to hear that. What happened?

@J_3564

Ай бұрын

@@PeaceLoveAndGuns the whole process of getting the starter out and putting the new one in was such a pain, its such a tight fit. But I got the job done!

@PeaceLoveAndGuns

Ай бұрын

@@J_3564Well, hey, that's great news! Congratulations on saving a good amount of money!

Your video was great. Do more. It's like explaining mechanic work for the less mechanical inclined, made me another less nervous to doing it

@PeaceLoveAndGuns

Жыл бұрын

Hey Cody Coleman, thanks for dropping my favorite type of comment. Knowing that I helped someone really helps to keep me inspired to keep me making videos. Thanks again and do please consider subscribing!

Great video guys, please make more about this vehicle.

Thank you for sharing, I need to do this soon.

@PeaceLoveAndGuns

2 жыл бұрын

You’re most welcome. Please let’s us know how it goes out if you have anything else to share that might help the community!

Excellent description and video

@PeaceLoveAndGuns

3 жыл бұрын

I'm glad to know it helped! Thanks for the feedback and do please consider subscribing!

Great video. That car needs a VCM disable device though.

@PeaceLoveAndGuns

2 ай бұрын

Really appreciate the comment and do please consider subscribing!

Other videos show taking the manifold off, I wonder if this way is better, great video guys, got a new subscriber here

@PeaceLoveAndGuns

Жыл бұрын

Hey, Manuel, Thanks for the comment as it halos to keep me inspired! I’m not sure about removing the manifold as this way was pretty easy as is. Thanks again, and happy holidays!

@abiscuit90

Жыл бұрын

4 cylinder vs V6. 4 banger has the starter under the intake manifold

@PeaceLoveAndGuns

Жыл бұрын

@@abiscuit90 Definitely different beasts. Thanks for the comment and do please consider subscribing!

@abiscuit90

Жыл бұрын

@@PeaceLoveAndGuns only cause you asked nicely!

Thanks guys. You guys have great personality and your video is very clear. I might have to replace my starter as well. Still troubleshooting to is if it's the battery, or relay/fuse/ignition switch. But i know it will be very useful instructions you gave in this video both in technical and safety aspects.

@PeaceLoveAndGuns

2 жыл бұрын

Scotty Kilmer just released a video recommending a $69 (nice) battery, starter, alternator tester. Thanks for the comment and do please consider subscribing! Also check out KZread.comJimLocke23

@CCG0D

2 жыл бұрын

@@PeaceLoveAndGuns just replaced it yesterday after troubleshooting and confirmed with O'Reilly's. They tested the old starter and it didn't even run. Just the same 1 click sound from the solenoid. New starter in thanks for your video and car started right up. Note for others: take off the bracket that hold the hose instead of just the U shape, and take off another metal bracket next to the EGR. That will free up a lot of room for your hands and the new starter to go in. I put electrical tape to secure the metal gasket to the new starter to keep that in place while wiggling it to position. He made it look easy in this video but it was actually frustrated cause the metal gasket just kept falling off.

@PeaceLoveAndGuns

2 жыл бұрын

@@CCG0D Glad to hear you're back up and running and sorry we made the gasket part look too easy! We probably just lucky on our install. I do like your tape idea, though! Thanks again for the comments and feedback! 🍻

bout to go do it

@PeaceLoveAndGuns

2 жыл бұрын

Good luck and godspeed! Thanks for the comment and do please consider subscribing!

I used a 12mm instead of the 13mm that you recommended for that top-nut, 13 didn't work, too loose. Also used 14mm instead of the 15mm you recommended for the 2 screws, same thing. Just wondering. Would have been nice for a link to PARTS.

@PeaceLoveAndGuns

3 жыл бұрын

I usually like a good tight fit 😅 but maybe I was wrong?🤷🏾‍♂️

@misterstealth9237

3 жыл бұрын

@@PeaceLoveAndGuns Not intended to pick on you, just clarifying. Good job, man. Thank you. "God & Country (with guns)".

@PeaceLoveAndGuns

3 жыл бұрын

@@misterstealth9237 👌🏽 All good! I didn't feel picked on. I just don't like giving bad info - so thanks for the clarifications!

@misterstealth9237

3 жыл бұрын

@@PeaceLoveAndGuns Took me a while to clip back that black auxiliary plastic connector. That copperish naked cable was assembled to the inside instead of around it on the outer side, thus not letting the aux connector plug all the way in. Army guy (me) made it happen anyways. Starting like a 2021 now. 👍🏻

@PeaceLoveAndGuns

3 жыл бұрын

@@misterstealth9237 Heck yeah! Glad to hear the video helped! Thanks for the comments and do please consider subscribing and maybe sharing a video of your choosing on your social media!

The reason the negative cable I'd removed first is to prevent accidentally touching ground when removing the positive first.

What's the bolt torque spec on the starter?

@PeaceLoveAndGuns

2 жыл бұрын

Not too loose, not too light! Sorry! I know it's not super helpful. I don't think we even checked the torque spec since it's not a sealing interface.

@PeaceLoveAndGuns

2 жыл бұрын

Thanks for the comment and do please consider subscribing!

Did you have any problems using the old shim or was the problem fixed?

@PeaceLoveAndGuns

2 ай бұрын

It was all good!

@J_3564

2 ай бұрын

@@PeaceLoveAndGuns cool, I’ll be replacing my starter soon, thanks for the guide!

Where u buy starter ??

@PeaceLoveAndGuns

Жыл бұрын

At this point, I don't remember. Rock Auto dot com is always a good place. At the very least, you can look up make/model/year and find the part "interchange" number so you can find the local parts houses near you and what they have in different brands. I have decent experience with amazon as well for car parts. Good luck!

lucky i live on a hill & have a `el manual...lol, not really hey fyi~ either your ghosted(I`m ghost busting...LOL) in comments or you deleted comment? i can see it in notifications but i cant reply to it or find it anywhere ? "Peace, Love and Guns commented: "Does the 1911 jam? lololololol 🤣 I crack myself up. Seriously though. I do like the AK47. I personally carry the Talwar by them, which is a BIG honkin folder that you can choke back on like the..." 10 hours ago" You could get a Glock knife, it wont jam, its hi quality for 'cheap' & made in Austria! The Talwar is badass, i think they will make it again soon! Where was original Talwar manufactured? I would love to see more USA made CS! I been caring the CS Frenzy for a minute, one of the best larger knives for EDC, its slim & 'light'! i want a CS Colossus & one of there new 'plastic'(FGX) balisong`s for fun & a possible shower knife! When your in the shower & the Psycho music starts to play, mother should be worried for her little boy! LOL

@PeaceLoveAndGuns

3 жыл бұрын

Hey man, yeah, that's weird. I don't even see it on my end when I check your video. Go to KZread Studio>Comments>and then Held For Review or Likely Spam to see if its there.

Replacing the starter may not fix the grinding. Honda released a TSB 16-002 where the torque converter needs to be rotated to allow proper alignment of the sprocket. The video is very helpful though, it is better that there was a camera-man while you were working.

@MrSamPhoenix

Жыл бұрын

Can it be rotated by spinning the crank?

@The0riginal

Жыл бұрын

@@MrSamPhoenix no. It is necessary to uninstall the starter and remove the bolts between the flex plate and the torque converter before rotating the torque converter itself.

@JesseTheG_

7 ай бұрын

That's for the 2013-2016 accords. Those are grinding so bad that the car fails to start at all. The 08-12 are starting fine, then grinding because the starter gear does not retract all the way. It's a different issue