Out of all the videos I watched on this yours was the best. The PVC tip and petroleum jelly brilliant. Thank you!

@HowtoandReviewsOfficial

Жыл бұрын

Thanks for the feedback! So glad it helped!

Thanks man. With your help, I just replaced the seal of my Saginaw steering box. Werx gude!

@HowtoandReviewsOfficial

11 күн бұрын

Awesome! Glad it helped!

as someone who isnt very mechanically inclined and not know what to do this video helped me alot to see what i need to do thank u! liked and subed!

@HowtoandReviewsOfficial

6 ай бұрын

Glad it was helpful! I hope you find some of the other videos helpful or entertaining!

Thanks for this useful tutorial, I will no longer have to disassemble the steering box of my XJ again when it is time to change the seals. Greetings from Venezuela.

@HowtoandReviewsOfficial

4 ай бұрын

Glad it helped! Venezuela!

Nice no BS video. I blew out all seals cranking the wheel all the way over. I did get to impatient and didn't lube up the new seals. good job

@HowtoandReviewsOfficial

Жыл бұрын

Awesome. Nice and easy!

Good tutorial! exactly what I needed to know! Thank you for taking the time.

@HowtoandReviewsOfficial

11 ай бұрын

Awesome! Glad it helped!

Awesome video, to the point, great instruction Thank you so much!

@HowtoandReviewsOfficial

10 ай бұрын

Glad it helped!

That was very efficient and informative. Thanks!

@HowtoandReviewsOfficial

Жыл бұрын

Glad it was helpful!

My 68 Dart steering box needs new pitman arm seals. Hope it works this easy.

@HowtoandReviewsOfficial

5 ай бұрын

Yeah, the same pump was used on many vehicles. I hope it goes smooth!

I know some of the video was somewhat oversimplified, however..this to me is the best one I've seen so far thank you I wonder if heat or gentle persuasion with a hammer is okay to use on the arm?

@HowtoandReviewsOfficial

4 ай бұрын

Glad it was helpful! I would definitely use the puller to get even force. Heat or hammer to jar things loose. Mine did not come off easy. It took a lot of force to break it loose.

Very well explained thanks a lot.

@HowtoandReviewsOfficial

11 ай бұрын

Glad it helped!

Thanks I just tried it and it really works thanks

@HowtoandReviewsOfficial

Жыл бұрын

Glad it helped!

One more question, spring side of seal facing up or towards the arm? Again thanks for the well done video

@HowtoandReviewsOfficial

4 ай бұрын

No problem. Spring side facing up into the pump. Flat plastic face side down toward the pitman arm.

Thanks bud 🤘🏻

@HowtoandReviewsOfficial

4 ай бұрын

I hope it helps!

@jeffreycaulfield8220

4 ай бұрын

@@HowtoandReviewsOfficial thanks my only problem is not being able to find a seal kit for a 08 wrangler jk , might be replacing the entire box

Damn im struggling to get the last seal i used to screws n broke so theres stuck on the seal im pulling with pliers but nothing im insert 2 more screws n use a hammer n piece of wood 🙏 thanks man im doing this on my 1979 camaro z28

@HowtoandReviewsOfficial

6 ай бұрын

You will eventually get it. There’s a bearing behind that last seal. Make sure you don’t go too far, or you might be running the screw into the bearing, and you definitely won’t be able to pull it out.

@DanielAlvarez-xl4qy

5 ай бұрын

@@HowtoandReviewsOfficial you know what i think i went too far in with the screws then ima try n unscrew them with pliers thanks alot !! Ima try it next weekend hopefully it comes out

Nice video. about how long did this job take??

@HowtoandReviewsOfficial

Жыл бұрын

My first thought is one hour if things go smooth. I would plan on one or two hours. Because things always seem to take longer than they should.

Pitman arm stuck

@HowtoandReviewsOfficial

3 ай бұрын

That is the way of working on vehicles. There usually something… Mine didn’t come off easy. It took some effort.