Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00714
This video shows you how to replace the inner tie rods on your 2005-2015 Toyota Tacoma. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This repair was done on a 2010 Toyota Tacoma Base 2.7L Standard Cab Pickup 2-Door 4WD Manual and the process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obHU/1AXAA00013
• Pry Bar 1aau.to/o9U/1AXAA00020
• 15mm Wrench 1aau.to/oad8/1AXAA00010
• 22mm Wrench
• 24mm Wrench
• 19mm Socket
• 21mm Socket
• Inner Tie Rod Removal Tool 1aau.to/oa5/1AXAA00438
• Adjustable Wrench
• Metal Cutters
• Pliers
• 1/2 Inch Impact Gun 1aau.to/oyL/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench 1aau.to/obdG/1AXAA00044
• Copper Anti-Seize
• Wire Ties
• Floor Jack 1aau.to/oaza/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oakX/1AXAA00065
• Large Hammer
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.