How to Replace Headlight Housing 07-13 Chevy Silverado

Автокөліктер мен көлік құралдары

Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ib/1ALHP00710
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 08, 09, 10, 11, 12, 13 Chevy Silverado
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
🔧 List of tools used:
• 10mm Socket 1aau.to/oaq8/1AXAA00017
• 7mm Socket 1aau.to/oaq8/1AXAA00017
• Needle nose pliers 1aau.to/osm/1AXAA00051
• Needle nose pliers 1aau.to/osm/1AXAA00052
• Ratchet 1aau.to/oaNc/1AXAA00016
• Socket Extensions 1aau.to/oaCM/1AXAA00015
Subscribe: / @1aauto
Check out our playlist:
Chevy Silverado 2007-2013 2nd Gen: • Chevy Silverado 2007-2...
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/baj/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 90

  • @1AAuto
    @1AAuto3 жыл бұрын

    √ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

  • @adamschaeffer1565
    @adamschaeffer15654 жыл бұрын

    Can literally take out my 06 duramax headlights in 10 seconds. They went from having the most accessible headlights to the most inaccessible.

  • @thatpermedmullet7911

    @thatpermedmullet7911

    3 жыл бұрын

    Let me introduce you to an OBS ford

  • @KapenW17

    @KapenW17

    2 жыл бұрын

    10seconds is for both sides on a 99-07

  • @Mr_Tecumseh

    @Mr_Tecumseh

    2 жыл бұрын

    and 4 disk brakes for overall better braking back to rear drums, what was up with that...

  • @garykreil5990

    @garykreil5990

    2 жыл бұрын

    Way over engineering, someone needs to be fired!!!!

  • @dannyb8504

    @dannyb8504

    2 жыл бұрын

    And that’s how fast they used to be for people to steal them also

  • @WhodatnTx
    @WhodatnTx3 ай бұрын

    I’ve watched lots of how to videos on KZread, and there is absolutely no one that comes close in quality or detail to the videos that A1 Auto produces ! TYVM A1 Auto !

  • @GregoryHaynes
    @GregoryHaynes8 күн бұрын

    Very informative video covering grill and headlight housing removal and installation. The headlight aiming video at the end was an important bonus!

  • @duggla781
    @duggla7815 жыл бұрын

    Thanks for giving such easy detail and step by step instructions for those of us who are "KZread Mechanics" it literally took me about 40 minutes to complete the job of replacing both sides.

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +D. Uggla Thank you!

  • @littleme1029
    @littleme10292 ай бұрын

    Thanks for the video! I found getting the headlight assembly out was quite a task. Could not push it down far enough. Took a 4 inch putty knife and put it in the top and it worked like a shoe horn...pop right out in seconds.

  • @Who_lee_o
    @Who_lee_o4 ай бұрын

    Thank you chevy for making it so difficult to just replace a simple lightbulb

  • @binridin01
    @binridin013 ай бұрын

    I’ve been buying from A1 for a couple years. The parts are always good quality and the shipping is fast. The videos are awesome! Always plenty of detail that saves me a lot of time. Thank You A1!

  • @nsboost
    @nsboost3 жыл бұрын

    Pro tip. There is a bracket to the inside of each headlight. If you take that bracket out, the headlight will rotate right out without it fighting you like it did him.

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +nsboost Thanks for the tip! We'll pass this info along to our production team.

  • @StevenCastaneda
    @StevenCastaneda4 ай бұрын

    Hey just wanted to say thanks for making this video! My dad and I had this on while we replaced the headlights on my truck and everything went pretty well. Thanks!

  • @lovelife6978
    @lovelife69785 жыл бұрын

    wow thank Chevy for making it almost 300percent harder then my old Silverado

  • @1AAuto

    @1AAuto

    5 жыл бұрын

    +love life Thanks for watching.

  • @elcocaino8728
    @elcocaino8728 Жыл бұрын

    Thanks. These videos have helped me learn how to work on my truck without paying anyone 🙏🏽🤠

  • @dangoleshootnetwork6036
    @dangoleshootnetwork60364 жыл бұрын

    Thank you for the awesome removal and re-install video! Quick Question, if you're installing new headlight assemblies on an '07 Silverado with a daytime running light LED strip between the high and low beams, what do you wire the LED strip to? Thank you.

  • @Whitemangarage
    @Whitemangarage4 жыл бұрын

    Very helpful video, thanks!

  • @donwold1622
    @donwold16224 жыл бұрын

    Thank you! Excellent video.

  • @reggiesmash2957
    @reggiesmash29573 жыл бұрын

    This video was perfect. Thanks👊🏾💪🏾

  • @josetrillo2428
    @josetrillo24287 ай бұрын

    Thanks for the video. It's helped me out a lot and save me tons of time.

  • @imagfinder
    @imagfinder5 жыл бұрын

    Thanks for the channel!

  • @sukhunchung2232
    @sukhunchung22322 жыл бұрын

    I’m watching video So wonderful Thank you so much.

  • @griffinsavoie1364
    @griffinsavoie13642 жыл бұрын

    10/10 video thanks a lot!

  • @ForkinCrazy
    @ForkinCrazy4 жыл бұрын

    FYI on the upper bolts you can use a long extension and the ratchet turns into a spinner. I have a set of Mac Tools and use the longer more than the short.

  • @lannydecamp7460
    @lannydecamp74602 жыл бұрын

    Thanks for providing video

  • @budtloper1
    @budtloper12 жыл бұрын

    I have a 2011 gmc sierra 1500 and the head light housings have small tabs on top that I don't see in this video. I was messing with a few and they broke off. Is that the only difference? Does everything else come off the same as in the video?

  • @chuckdawg2799
    @chuckdawg27992 жыл бұрын

    I have replaced all 4 bulbs without taking anything apart but moving the air filter housing out of the way. However, I have new headlight housing to swamp out due to damage, so this is nice. It should be like 3 bolts and slide out, so stupid. I appreciate the prep.

  • @crlaw75

    @crlaw75

    2 жыл бұрын

    All because of the third bolt is why all the other componets have to be removed.

  • @Zysstix

    @Zysstix

    Жыл бұрын

    I have done the same for the bulbs, I believe most of these steps are necessary for this model year. Way more complicated for most people compared to the earlier model years

  • @johnharrison5656
    @johnharrison5656 Жыл бұрын

    Does that year model have butyl as a sealant between the housing and lens?

  • @floydbell7584
    @floydbell758424 күн бұрын

    WERE AND WHAT KIND OF CLIP HOLDS THE GRILL IN TO DO A GOOD JOB SHOWING THE CLIPS

  • @jzac89
    @jzac8911 ай бұрын

    These dudes must work by the hour cuz it doesnt take that long especially for replacing the bulbs... took me like 30 minutes

  • @jamesrinaldo7168
    @jamesrinaldo71684 жыл бұрын

    Is it really necessary to take the grill off in the top cover and all that to get to the headlight I mean cuz it seems like it's about ready to come out with just taking those two or three bolts out on top

  • @JU5TBL4ZE

    @JU5TBL4ZE

    3 жыл бұрын

    If you look closely the assembly will hit the grille

  • @karlhanson1229

    @karlhanson1229

    Жыл бұрын

    I broke the plastic tabs off while trying not to remove the grill

  • @Creation3in1
    @Creation3in13 жыл бұрын

    You would probably want to test the headlight out after connecting the new lights , before putting it all be together. Great video though. I’ll use it for my headlight change, thanks.

  • @tacticalbandicoot4003

    @tacticalbandicoot4003

    3 жыл бұрын

    Test twice bolt once

  • @drglinski
    @drglinski5 жыл бұрын

    If I remove and reinstall the same lens assembly do I still need to adjust it?

  • @brentduncan2137
    @brentduncan2137 Жыл бұрын

    Thanks!

  • @leroymorris6036
    @leroymorris60364 ай бұрын

    Thank you

  • @Svo_matt_2.3
    @Svo_matt_2.32 жыл бұрын

    Wish i knew this before I bought my headlights 😂

  • @ThunderPantz01
    @ThunderPantz015 жыл бұрын

    I am failing to see what is updated over your older video?

  • @l8tapex
    @l8tapex3 жыл бұрын

    thanks

  • @codym6376
    @codym63764 жыл бұрын

    I also took the top two bolts out of the bracket next to the headlight and loosened the bottom bolt to let that bracket pivot to the side and this gave me extra room to get the headlight in and out.

  • @pipgkshutout
    @pipgkshutout3 жыл бұрын

    If I am getting moisture build up in one of the headlights, do I need to replace the whole headlight? Or do you sell the rubber gaskets for around the outside of the headlight to the connection point?

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Bob Pipech Usually, moisture will come and go over time. Water pooling at the bottom of a light will indicate an issue. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @domdrty

    @domdrty

    Жыл бұрын

    @@1AAuto headlights shouldn't have issues with moisture getting into them. That indicates poor quality parts.

  • @MrKing-ce5hh
    @MrKing-ce5hh4 жыл бұрын

    50 ten mm bolts later

  • @o4shomusic
    @o4shomusic Жыл бұрын

    The push clips on my radiator cover were a real hassle to reinstall, turns out I took out the entire clip, don't make the same mistake lmao

  • @therock200202
    @therock2002023 жыл бұрын

    I have a 2010 Silverado 2500HD and the books call for the H11 replacement bulb but it has the h3. Why is this and how do I change it to the H11?

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Harry Clark We would suggest changing the bulb to the same design that was originally in your headlight.

  • @therock200202

    @therock200202

    3 жыл бұрын

    @@1AAuto I’m not sure what it is supposed to be. Any help would be great.

  • @jamesrichard448

    @jamesrichard448

    3 жыл бұрын

    If you bought the truck pre-owned, the previous owner could have put the wrong bulbs in when changing them

  • @jordankeith9854
    @jordankeith98543 жыл бұрын

    Stupid design. Should never have to take the grill and wheel splash guard out. GM should have stuck with the retainer stake design on the earlier models. Could change it 3x for changing this one once

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Jordan Keith Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @crimsontide1980

    @crimsontide1980

    10 ай бұрын

    GM only does this for people who aren't mechanically inclined so they take it to a shop to get it done. Not that you have to be mechanically inclined to take a grille off, but they want to make you work for it

  • @Alientraveler003
    @Alientraveler00311 ай бұрын

    All this for a signal light grill is 250 bucks light case are 200 each 🙃

  • @user-dd1mx3df2w
    @user-dd1mx3df2w3 жыл бұрын

    Why not just add a brand new wiring harness with the light Assembly

  • @tacos1308

    @tacos1308

    3 жыл бұрын

    Save cost

  • @damianoby8540

    @damianoby8540

    Жыл бұрын

    $$$%

  • @Nick-qh3cc
    @Nick-qh3cc3 жыл бұрын

    How about the driver side?

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Nick 505 Thanks for watching! The process for the driver side should be the same as the passenger side.

  • @shawnmcclure7282
    @shawnmcclure72824 жыл бұрын

    Great video but what about other side.

  • @nuke373
    @nuke373 Жыл бұрын

    ah i think some black spray paint over the top oughta do the trick just fine 😅

  • @michaelweaver9264
    @michaelweaver92642 жыл бұрын

    Good video. But I just can't get used to seeing people working on vehicles with latex gloves on. Guess I'm old, and don't mind getting dirt on my hands

  • @44hawk28
    @44hawk28Ай бұрын

    The tutorial on setting your headlight broadcast height is in error. The level for both lights should be at the level of the headlight. Which is why you can't do that on that freaking truck. The truck uses the highest position for the low beam. And it shouldn't be all that is doing is blinding oncoming drivers and people that you're coming up behind. You should use the lower element as the low beam. Hence the name. But the top edge of the light in Mission Valley should be at the same level. Otherwise within about 100 foot you are not Illuminating anything in front of the driver. You're depending on the right side low beam to do all of any decent distance illumination. I don't know where you got that idea that you put it 2 in below level or 4 in below level. But they should be at level. At the worst you should be less than half a degree below level at 100 ft. Which would make it 6 in at 100 foot. Now you're talking about less than an inch and a half for both headlights at 25 ft.

  • @hodgemods
    @hodgemods9 ай бұрын

    Ahhh 10mm

  • @44hawk28
    @44hawk28Ай бұрын

    It has always been my intention, that although there were some good engineers and general motors. The morons that decided to require you to take part of the wheel tub out of the way and take the grill off the automobile before you could get the headlights off of the vehicle are absolute idiots. General Motors for several years had a nice clean you lift the hood you pull two locking mechanisms up and you slide the headlight bucket out and replace it. A completely clean and simple removal and reinstallation. As an addition, the price you're paying for that headlight assembly, the wiring should already be on it. There's also a problem with where they put the low beam in high beam on the truck. These trucks set relatively high and even if you're low beam is set level you're constantly blinding oncoming drivers and drivers that you're coming up behind. The low beam should be on the bottom of the headlight assembly not the top

  • @stuartpino219
    @stuartpino2192 жыл бұрын

    Such a stupid design, having to go through these steps even to change the bulb

  • @WereCreed

    @WereCreed

    2 жыл бұрын

    Its why I just ordered a new set of after market lights, my low beams went out 3-4 days ago and if I'm basically gonna have to disassemble the front end, I'm at least putting new LED lights in.

  • @KaveMan504
    @KaveMan5042 жыл бұрын

    this looks like some BS.

  • @chadk3573
    @chadk35733 ай бұрын

    1st: disassemble your entire truck . . . 😅😅😅😅

  • @tammybeeson922
    @tammybeeson9228 ай бұрын

    That is ridiculous compared to my 05

  • @chrismoraca1234
    @chrismoraca1234 Жыл бұрын

    Stupidest design ever. Tear half the front end off to replace a light. Might as well replace them all when you have the damn thing torn apart. Hate my 08. Love my 02 soo simple to replace on the 02

  • @sippili3927
    @sippili39272 жыл бұрын

    All this bs just to remove a headlight smh

  • @natebentancourt2704
    @natebentancourt27043 жыл бұрын

    YALL DONT NEEDA TAKE THE GRILLE OUT, LESS WORK

  • @1AAuto

    @1AAuto

    3 жыл бұрын

    +Nathan Bentancourt Thanks for the tip!

  • @natebentancourt2704

    @natebentancourt2704

    3 жыл бұрын

    @@1AAuto i lied! i tried it out but you actually do needa take it out!

Келесі