LASFIT Full Package LED Bulb Kit For 08-13 GMC Sierra
Автокөліктер мен көлік құралдары
Visit www.LASFIT.com to check products available for your vehicle!
LASFIT 10% OFF DISCOUNT: ELGALLO10
Link to “The Whole Package” for the 2008-2013 GMC Sierra 1500 Kit:
www.lasfit.com/products/2008-...
2008-2013 GMC Product Page:
www.lasfit.com/collections/le...
2008-2013 Chevy Silverado Product Page:
www.lasfit.com/collections/le...
Пікірлер: 53
I replaced every bulb inside and out with ALL LASFIT LED bulbs. Great company and very affordable quality! Love them and looks awsome!
Damn I was debating getting these lights and this just sold me. And those switchbacks are DOPE
I’ve got the same truck in white I love it so far. Going to install these headlights as well this week. Thank you for the video!
I'm glad that your installation went so smoothly. I purchased new headlight housings, fog light housings, and tail light housings along with this kit, and the fog lights clips don't fully engage and just fall out. The low beam headlights twist to lock in, but one lamp when it twisted to lock in, continues to spin, and the led module pulls straight out with only compression against the oring as resistance. The front turn signal/running lights seem very loose in brand new sockets, 2 fell into the housing when installing it. I'm upset with it because overall I think these are high quality, and I wanted the switchbacks in the fog light position as that's an amazing feature. But having to worry about a lamp falling out really sucks.
I did my puddle light son my sierra Denali and I absolutely love it
Nice vid thanks! Any one else get flashed by other people thinking you have your high beams??
Good that u explained alot about these LASFIT LED's in comparison with the factory halogen bulbs.. I think I heard u say that the 6000k have a slight blue( ish )tint to them...If so that's the color/look I would like for White GMC SIERRA TEXAS EDITION - 2012.. I plan on ordering the whole led package myself & have my mechanic install them...
thanks for the video you gave me a good idea
Beautiful truck reminds me of mine 👍🏾
Thanks for the video! Based your experience I replaced my headlights and DRL/turn signals with LASFIT. I did run into a problem that I haven’t solved yet… Passenger side turn signal lamps (orange) don’t work for flasher or turn signal, but DRL (white) function is fine. I think I may have ruined the flasher or something because I was changing the bulbs with the power on. Right turn signal doesn’t work in front and taillight flashes quickly like a bulb is out.
Im having an issue with my taillights not working im not sure if its the wires or the actual tailights because the taillights are led and i had them unplugged since January and the wires along with the truck bed was outside im not sure what to do what do u think could be the problem
Dope my boy
What did you end up doing for the Brake lights in back?
Your Thumbnail is Hilarious! Nice Vid! 💯
Those look nice! Off subject, what radio is that?
What happened to the other Denali? The newer one?
21:10 i laughed too man that difference is ridiculous 😂
So I have the same truck as you and I’m thinking about upgrading my lights. I want switchbacks for the front turn signals and I’ve been having a hard time finding LED high and low beans. Last fit switchback Front bulbs with the resistors built in Hall are they working out with you, who did you buy them through. Thanks.
Nice
How are they holding up?
What part of Texas you from
I think the need to be clocked since the factory bulbs sit in a weird position. You should have read the little manuals.
@cgmwoodworx
7 ай бұрын
I have the same problem, I was able to get my high beams to the vertical position but no luck with the low beams, I can't see crap.
you are quite the talker brother
After tinting the front window in my 22 gmc canyon i just had to order the headlights. Stock canyon headlights have bairly passable performance and my dumbass decided it would be a good idea to tint the front window
Been thinking of getting their turn signals since they don’t require resistors
@adrianb7452
2 жыл бұрын
funny thing is that for the 07-13 sierras/silverados still need a resistor
@obsession4842
Жыл бұрын
@@adrianb7452 my sierra has the switch backs with no flash. Its just the silverados
@adrianb7452
Жыл бұрын
@@obsession4842 my homeboys sierra still had hyper flash
@nicholashuft3598
10 ай бұрын
My 2010 sierra had hyperflash. Had to do resistors.
Nice truck,question why do you have Sierra emblem on the back and the Denali emblem on the sides?
@Wireburner79
Жыл бұрын
Because it’s a Sierra Denali lmao. That is how they are all badged.
Those LASFit bulbs are off the chart. I have already put LED turn signals in my 2010 GMC Sierra, but I have hyperflash. I can hear the Turn Signal Relay switch under the hood in the fuse assembly clicking. I bought the replacement relay but not sure where to put it. Can you help me or lead me to someone who knows about the Fuse Box Assembly on my truck? Any help would be greatly appreciated. Thanks my friend.
@toyotabrony
11 ай бұрын
Don’t have to. There’s a new product from lasfit for led turn signals. They solved the hyper flashing problem. And it’s much brighter because they got the wattage increase that’s 2-3 wattage more than oem incandescent bulb that makes 21 watts. With led makes 24 watts. It will not hyperflash and it holds up to 30 minutes without hyperflash. Aluminum heat dissipation and that white cap on top is the ceramic for better heat dissipation. On the description is says with 24 watts, that’s 2000 lumens per bulb. But it’s gonna be a soft super bright amber, so they made it possible by making so bright, they made it a bit softer that’s more comfy despite how bright it is.
@toyotabrony
11 ай бұрын
It’s called Lasfit - T3 series. They also make a new all in one unit right before turn signals. It’s an LA air series.
Does the day time running lights work? Do u get hyper flash from the LEDs
@bcline777
Жыл бұрын
My DRL work fine. No hyperflash.
Why is it that when I turn my high beams on my low beams turn off?
I have a GMC Sierra like yours , I put All 3 switchbacks in but one keeps popping out and it's making me mad ! Like it clicks in but it pops out with a slight move
@danielhopper9335
2 жыл бұрын
Same thing happening to me. Driver side headlight top one. You ever figure it out?
@kaymenw1103
2 жыл бұрын
Any solution to this I’m having the same problem?
Did those led headlight bulbs go in the 9-3 o’clock position?
@callmefrog76
Жыл бұрын
Is see there was a reply but it’s not showing it. But same question were the LEDs and 9/3 vs 12/6 o’clock position?
@Wireburner79
Жыл бұрын
Yeah those lights are definitely not orientated in the proper position. Don’t buy these. Morimoto and gtr lighting make clockable bulbs. After they are installed they can be rotated to the proper position with the the diodes facing 3 and 9 positions so the beam is focused properly. How are pointing 12 and 6 and will be like a flood ligh and blind oncoming traffic and driver will not be able to see as well also. DO NOT INSTALL LED HEADLIGHTS LIKE THIS.
@toyotabrony
11 ай бұрын
@@Wireburner79lol why not? There’s nothing wrong with them. As long u got the right bulb. Like these. They are perfect oriented led bulbs. These work well. Lasfit makes great quality led bulbs. Not as pure high quality as morimoto and GTR-Lighting, but these are close as it can get
@toyotabrony
11 ай бұрын
Don’t listen to the last comment. Having a perfect or period correct led bulbs for projectors and reflectors, always has to face between 3 o’clock to 9 o’clock. U want to have the best beam pattern. Facing on an angle or up and down will not work.
@cgmwoodworx
7 ай бұрын
The 6 12 position you can't see crap on low beam, it's terrible
always match lense color with the bulbs or you will get burn through
@aaronwilliams2246
Жыл бұрын
@TEXT+①⑦①④⑨②②⓪⑤⓪⑨ i
@tonymontana6872
Жыл бұрын
If that were true then taillight bulbs would be red but they’re not
@billcharlene1450
Жыл бұрын
@@tonymontana6872 🤦
I just bought this kit for my 2012 GMC Sierra 1500, I can't wait to get them on my truck! How long was the installation for the whole kit?