How to Replace Front Lower Control Arm 2003-2007 Honda Accord

Автокөліктер мен көлік құралдары

Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ia/1ASLF00189
This video shows you how to install new control arms in your 2003-2007 Honda Accord. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pry Bar 1aau.to/oXp/1AXAA00020
• 14mm Wrench 1aau.to/oZE/1AXAA00010
• 17mm Wrench 1aau.to/oZE/1AXAA00010
• 14mm Socket 1aau.to/obEu/1AXAA00015
• 17mm Socket 1aau.to/obEu/1AXAA00015
• 19mm Socket 1aau.to/oani/1AXAA00043
• 32mm Socket 1aau.to/ocY/1AAST00003
• Locking Pliers 1aau.to/omz/1AXAA00139
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ou3/1AXAA00252
• Swivel
• Torque Wrench 1aau.to/oaMo/1AXAA00044
• Gloves 1aau.to/oanD/1AXSS00048
• Safety Glasses 1aau.to/oafs/1AXAA00343
• 3/16 Allen Wrench 1aau.to/o3/1AXAA00006
• Floor Jack 1aau.to/oabB/1AXAA00068
• Hammer 1aau.to/oWW/1AXAA00091
• Jack Stands 1aau.to/oYA/1AXAA00065
• Punch
• Rubber Mallet 1aau.to/ohp/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 11

  • @TRQ
    @TRQ9 ай бұрын

    √ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

  • @iamasmurf1122
    @iamasmurf11226 ай бұрын

    you did not need to remove the drive shaft centre nut ? why the hell did you do that LOL

  • @presidentcamacho

    @presidentcamacho

    6 ай бұрын

    I thought the same thing, but I also think it is to keep the cv axel together without doing damage as the arm swings into place. I also think it may fit without having to swing it in place. When I do this to my car I will find out and post an update.

  • @raymondperea8352
    @raymondperea83529 ай бұрын

    @TRQ How long would you stay it takes for both side replacing

  • @Mushroomancer
    @Mushroomancer6 ай бұрын

    I can really relate to those corroded wheels, mine too exactly the same

  • @SashaNem
    @SashaNem3 ай бұрын

    thanks guys

  • @honkbob
    @honkbob2 ай бұрын

    Look easier than just replacing the bushing?

  • @donniev8181
    @donniev81818 ай бұрын

    Bolt and nut sizes are different on the Honda Accord, rear bolt is actually a 12mm I believe.

  • @JC-ES
    @JC-ES6 ай бұрын

    Excelente video

  • @lyndelld1
    @lyndelld17 ай бұрын

    Is it difficult without a lift?

  • @craigmerrill2156
    @craigmerrill21565 ай бұрын

    Strut fork will not line back up

Келесі