How To Replace Front Brakes 2009-2017 Chevy Traverse

Автокөліктер мен көлік құралдары

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ib/1APBS00444
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2009-2017 Chevy Traverse.
• Check here for more videos on the 2009-2017 Chevy Traverse • Chevy Traverse 2009-20...
This process should be similar on the following vehicles:
2009 Chevrolet Traverse
2010 Chevrolet Traverse
2011 Chevrolet Traverse
2012 Chevrolet Traverse
2013 Chevrolet Traverse
2014 Chevrolet Traverse
2015 Chevrolet Traverse
2016 Chevrolet Traverse
2017 Chevrolet Traverse
Tools you will need:
• 13mm Socket 1aau.to/oa/1AXAA00015
• 21mm Socket 1aau.to/oa/1AXAA00043
• 22mm Socket 1aau.to/oa/1AXAA00266
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oa/1AXAA00278
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• 3/8 Inch Air Impact Gun
• T30 Socket
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/oa/1AXSS00035
• Floor Jack 1aau.to/oa/1AXAA00068
• Jack Stands 1aau.to/oa/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Chevy Traverse 2009-2017 1st Generation: • Chevy Traverse 2009-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 7

  • @TRQ
    @TRQ3 жыл бұрын

    √ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

  • @nectros8452
    @nectros84522 жыл бұрын

    I love that southern vehicles don't have near the amount of corrosion their northern counterparts do.

  • @lucysantiago2067
    @lucysantiago20672 жыл бұрын

    I'm trying to learn how to take care of my car on my own

  • @flyingmunk8956

    @flyingmunk8956

    2 жыл бұрын

    That is awesome. I have learned a ton from YT or on my own. Its good stuff to know

  • @lisernorman6429
    @lisernorman64292 ай бұрын

    You are awesome! Great video, thx

  • @Whit_Siever
    @Whit_Siever Жыл бұрын

    My mechanic was trying to scare me with my 2017 says newer GM products have sensors/gizmos built into the calipers to where the traditional DIY is extinct only a dealership can reset the sensors so they make more $$$$ According to this vid that appears to be a load of baloney

  • @jonathans3878
    @jonathans38783 жыл бұрын

    Won't the brake part cleaner degrade the rubber boot?

Келесі