Thank you so much for your video. I’m a 66 year old widow and this was great information for me

Being from the rust belt of Michigan, it's important to check wear between the inside and outside pad. If there is a big difference, check your slide pins. I found that my pins had seized due to rust. The inside pad was getting all the wear while the outside looked ok. Due to the pin being rust "welded", I replaced the caliper also.

@b79747

7 ай бұрын

I think this could be happening with mine, when I look at the rotor there is only shiny metal in the middle then a thick rim of rust on the outside, seems like only the middle of the pad is actually being used.

@IAmMisterD

28 күн бұрын

Well-greased, free-moving slider pins are so important... and when they get rust-welded in, sometimes not all the heat in the world will release them. I actually was able to bend one of the pins, it was so seized..... new caliper time! yay! lol

Such an honest, professional explanation. Thanks for this most useful content, cars are crucial and expensive to maintain if the owners don't know about mechanics. Also it is easy to be scammed or tricked into buying new parts when some of the parts are still useful .

Thank you. I'd been recommended to change all four rotors and pads, and this would have been okay, as I knew the job must be pending but I did further research and ended up just taking the whole wheel off for a good look, as you showed. And this gave me a much better view. A neighbour helped me check first, as you showed. I've just done fronts for now and I'm more confident in checking periodically. Your editing skills raised the quality and value for me. You've affirmed belief that I can monitor pads more closely and finesse those last few mm. I noticed the fore part of the pad can be thinner than the aft (rear) part. Thanks again.

Thank you for this! I'm trying to learn to service my own vehicle because service shop prices are INSANE. Plus it's just interesting! I love this video. Covers the important material with detail and context, no condescending attitude or acting like we should already know this stuff! And its explained very simply too so even people who aren't in the trade can understand. 10/10. Love it. You have a new fan!

@cormorant_on_arock7934

11 ай бұрын

it's also empowering to be able to do it yourself. :) changing oil, brake pads, and spark plugs are the big ones to know, but i've found out that even changing water pumps and radiators is ... well, much more difficult, but very much do-able. i have had BMW's and now a Mercedes, so i "had to" change the radiator myself, and it is not easy, but absolutely do-able. especially with all these great youtube videos of regular people doing it themselves

@philipnoonan4721

9 ай бұрын

I agree with the comment regarding detail and context, instilling the belief that we can do this.

As a rule, I'm highly critical of KZread presenters as to professional (or entertaining) content, clarity, factual information, etc . . . that said, I rate this video A+. Nice work!

I was just told I'm at 4mm and a little rust on the rotors. They showed a picture of the pads and they said I could wait but recommended the rotors as soon as possible. $1200 for the front and back before taxes. They nuts!!!

@crucifire9224

Жыл бұрын

Rockauto!

@danieldeleon6813

Жыл бұрын

Don’t do it. They are ripping you off!

@mitchellcox1912

Жыл бұрын

Way too much $$

@theloneviking9145

Жыл бұрын

Let me guess was it Midas?

@mostmost1

Жыл бұрын

@@theloneviking9145 Toyota dealership

In New England I find that pads and rotors go bad quicker due to the rust. Slide pins get stuck, the pads get stuck in the brackets, the calipers seize, the rotors get nice big rust rings/lips, etc! Customers sometimes complain about having just replaced their brakes the previous year and only did 10k miles and not their brakes are bad again?! This can happen! The best kept cars are garaged, people who are easy on their brakes, people who don't let their cars sit too long, etc. Didn't think I would like this video, but you literally said everything I tell customers! Liked!

@dentuso8

21 күн бұрын

How about coated or silver-zync dycromated rotors and not using cheap pads ?

@nickv4073

4 күн бұрын

@@dentuso8 I use pads made of dilithium crystals. They never wear out.

Considering what can happen if you let pads go too long, I don't think I'd worry about trying to get the last possible mile out of them. If you aren't trained in this area, find a reputable shop that will put the car up on a lift and then let you inspect the pads and rotors with the technician. You want to inspect both the outer and inner pad thickness on each wheel, they should be very close to the same thickness if the brakes are working correctly. If one pad is significantly thinner than the other, that indicates a problem with the caliper sticking. Just changing pads without fixing the caliper is not a good idea. If you need to change the pads on one side of the vehicle, change the other side as well. Make sure to check the rear brakes as well as the front, often the wear of the rear brakes is less than the front and you will only need to change the fronts. I've owned vehicles in the past that wore out two sets of front pads before the rears needed to be replaced. And lastly, even if the pads weren't allowed to wear so far the metal backing damaged the rotor, you may need to to replace the rotors anyway. Rotors wear even when the pads are in good shape, and you can see and feel a ridge near the edge of the rotor. There is a minimum thickness specification for rotors, and the technician should measure the rotors and check the surface finish. Installing new pads on rough rotors will just make the new pads wear faster, and running rotors that are too thin will cause excessive heat buildup. These days few shops refinish rotors, most are just replaced with new parts.

@nickv4073

4 күн бұрын

Most shops WILL NOT ALLOW you to get under your car while its up on their lift. The reason is it is prohibited by their liability insurance policy. Any shop that gets caught doing that will be immediately dumped by their insurance company.

Thank you for such a clear concise video. I learned a lot from you today and feel empowered to change my own brake pads!

Thanks man. This answered EVERY question I had. 10/10

Pleasant personality. Speaking voice. Wonderful information.

@Velo1010

Ай бұрын

100% agree. Great voice and pace makes this an outstanding video.

Great content! I run Brembos on my Challenger Scat, it's coming up on the 2 year time frame, I will check them in the spring when I take it back out of storage. You can access them pretty good from the outside with the OEM rims.

Awesome video, the amount of information given and the way it was present was top tier. Thank you and I will keep this for future reference!

@BudgetMechanicHawaii

Жыл бұрын

Mahalo!

I had a couple thoughts to add, first and foremost don't rely on those brake wear indicators because they can rot off even in non-salted areas. Secondly, don't go to the dealer at all unless you absolutely have a need to because after 2020 and probably for the next five years, most dealers are running this scam where a brake problem comes in, quote $1500 for parts and labor, and offer to buy your vehicle and give you money down on a new lease after the job is declined. The dealers don't even work on cars either, just slap on new parts and attempt to dupe folk who don't know any better into fearing a false repair bill. It's not like dealers haven't done it before but seems to be more widespread currently. Anyways great video, nice to see KZread recommending channels like yours. They never seem to feature mine.

@cjadventures8840

4 ай бұрын

During covid my piano teacher got a brand new Honda passport, her previous car, 06 Honda pilot was in perfect working condition. I wasn't sure why she got a different car but she said that her car had a bunch of problems yada yada. She might've been duped from a dealer like you said, stealerships are such a scam. Just last week I needed my wheel locks to be removed and replaced with regular lug nuts (I lost the key and didn't want to buy a new one, I also provided the lug nuts) and they quoted me $57, for what?

@bbminetesting6837

3 ай бұрын

@@cjadventures8840 I bought a lug nut remover tool from Auto Zone for probably $15 (it was a while ago, so I don't remember the exact price) and took off all the locking lug nuts.

@codywinkle2303

Ай бұрын

No idea where you got that information from, but sounds like a lot of here say. I’ve been at dealers for 10 years and have never experienced this from west to east coast. Not saying there aren’t people like this, but it’s not a dealer problem, it’s a tech problem. Independent shops if anything are worse. I’ve been at independent shops that were extremely shady. Thanks to me, they got sued and had to pay out.

@aku2dimensional

Ай бұрын

@codywinkle2303 I've been waiting over a year to clarify my comment. I can agree that the issues I've had could be related to the shop itself and not particularly associated with dealerships. Like yourself, I have had service done at dealerships before and usually didn't have much hearsay to be heard. However, in the last year I had an independent shop and a dealership do parts gouging and parts slapping, that's the dealer I mentioned in my previous comment that wanted $1500 for a brake caliper and front brakes. I declined their offer and then went to the independent shop that wanted $1200 for new brakes and rotors for all four wheels and a reman caliper. No one wanted to fix a simple seized caliper and warped rotor, they wanted to overcharge and scare me into believing the car would "catch on fire" as the dealership's service advisor put it to force the sale. A week later that dealership sent a letter offering money down on the vehicle attempting to force another sale. The hostile buying and selling technique by the dealer is what I wrote about, but I didn't have a bad experience at the independent shop yet that would have changed my perspective on things. I would have commented something different.

Yes thank you so much. Recently widowed and I at least can inspect and make my own decisions about if my brake pads need to be replaced

@timothyhorine2570

28 күн бұрын

I’m sorry for your loss. Learning about usual car maintenance is pretty easy and for everyone regardless of our background. KZread has many quick, helpful videos other than this to learn how to inspect when your car needs certain things maintained and/or replaces other than this one. I wish you the best, and I hope you find the courage (and patience) to even work on your own car. Best wishes

This is a great Video. Definitely feel more comfortable about understanding this. Thanks much appreciated.

Thanks for this. That was the clearest explanation I’ve ever heard. 👍🏼👍🏼

We live in the Southern Sierra just outside Sequoia National Park (like a half mile outside). It’s a forty mile trip to shopping or doctor appointments. One way. If not for tourists and two traffic lights, I can and have driven all the way without using my brakes at all. And that’s downhill. Coming back is even easier. Drivers from the flats amaze me at how much braking they do. Especially uphill. I often remark to my wife, ‘I’ll bet that driver buys brakes pretty often”. My 2017 Tacoma has 49k on it and is nowhere NEAR ready for pads. Cheers. Good video

@wildhorses6817

8 ай бұрын

How do you do That, do you have manual transmission? With automatic transmission how do you avoid using brakes ? Thanks.

@mann_idonotreadreplies

2 ай бұрын

@wild downshift it yourself or brake Early but light pressure

@3markaw

4 күн бұрын

@@wildhorses6817 Anticipate the red lights and coast up to them. Never understand why people floor the pedal between lights.

I've always done same as what Josh states here, just checked the pads and rotors on my 1988 Mazda truck last week; at 233K miles, still on factory rotors and rear drums. And my 1998 Frontier (275K) and my 2004 Frontier (106K) are still on their original rotors and rear drums as well.

Great video and best content i could find on brakes check. What i like about is his open-mindnes in taking most possible cases... which is totally opposite of the rest youtubers ("happy-happy with wishful thinking).

Great job ! Appreciate to organized, right to the point presentation.

I'm not seeing a ring on that finger, and thats very exciting 😊

@WhittyPics

14 күн бұрын

He may not be wearing one for safety reasons. Rings are dangerous around machinery

Excellent presentation! Thank you!

good details on when to change rotors

Great info regarding brake pad check! Another cause of brake noise is due to a rock being trapped in the brake assembly.

Mahalo Bro !! Never been to HI but would love to. Just used your 3.3 v6 alternator video to complete success. Big props Sir :) I'll

I just love these videos wish i had the tools. Regardless though I feel more informed

Thanks a lot for another great video, I have been many times cheated from Shops, I don't trust them anymore, SO I LEARNED TO DO JOB SELF AND SAFE A LOT OF MONEY. Thanks again and God bless

@BudgetMechanicHawaii

3 ай бұрын

Good job 👏🏼

Good info. I didn’t know we can inspect our own brake this way. Usually, when I have my tires balance and rotate, Les Schwab check my brake too or at least I think they did cause my invoice always have information regarding the brake.

Thanks for the thoughtful review. Lots of great tips.

@BudgetMechanicHawaii

Жыл бұрын

Glad it was helpful!

Good morning Josh John Chan the fisherman, 54 year old lawman, will retire at 55. I changed all fluid on my cars. The only thing I have my trusted mechanic to do my brakes. I don't want to deal with espestoss, bad news for human lungs. Enjoy watching your video, I think you're one of the highly honest mechanic I ever listen to. Bravo to young man, it's too bad when I retire, my wife and I will move to Florida not Hawaii, haha. From now on I will inspect my own brakes. Thank you B safe

@mann_idonotreadreplies

2 ай бұрын

Cool story bro

@gaborkorthy8355

2 ай бұрын

Automotive brake material has not been made from asbestos in decades.

You definitely earned my sub. This helped a lot and will definitely use these tips next time I go to the mechanic.

Thank you i spend hundred on brakes Pads for nothing you are good man

Great content, I just found this channel today and almost if not every video is a masterpiece, why isn't it common ...I'm learning alot...thanks a lot ...

@BudgetMechanicHawaii

Жыл бұрын

I’m glad you found me 🤙🏽

Very well presented. I'd add the importance of checking both inside and outside pads because they'll wear unevenly, if the caliper freezes in the mount. Been there 🙂

Great video. Very informative. Keep up the good work!!

Safety note: ALWAYS use jack stands to support a vehicle after raising it with a jack (in case the jack fails).

Nice work bro. Appreciate the simplicity

@BudgetMechanicHawaii

3 ай бұрын

I try 🤙🏽

Awesome video. Everything I needed to know.

Thank you, very informative.

Good points! A US penny is ~1.5 mm thick. If the mechanic recommend a change based on using a caliper and pads, measure 4mm. The DIYer should just go ahead and change it.

Thank you. I've been upset with my mechanic for removing the pads to show me they were ok,, even though scraping sound with braking. I guess that's OK. I did go ahead and replaced brakes and roters, no more scraping and brakes much better, buy a little squeaky.

Very helpful video..thanks

I learned a lot from this video. Thank you.

@BudgetMechanicHawaii

Ай бұрын

Glad it was helpful 🤙🏽

This was an awesome quick video. Helped me do my brakes today rather than paying $3-400 for the front brakes.

@yahwehjehovah8113

5 ай бұрын

I told my ex husband that once or twice depending on who is Even that time

Man your channel is really great! Keep it up! Valuable practical content 👍👍👍👍

Thank you,i am 64 and the more i can do myself the happier i am,ego aside,i only have a motorcycle so pads are no problem for me or drums,but i never did a car although i am very familiar with the process although i never did a car before i always wanted to so i will try my wifes 2012 chevy sonic with 45,000 miles on it,so wish my luck,i appreciate your video very much,thank you.

@RChico-iv1qe

Жыл бұрын

Is this first time to replace the brakepad for 45000miles?

Thx so much. This is so helpful. I’m about to go get my brakes done and don’t want to be price gouged.

thanks for the education

great video appreciate --yes disclaimer agree

Great video. Thank you

Très belle démonstration

You are the best explaining and thanks for sharing your skills thanks!!

@BudgetMechanicHawaii

Жыл бұрын

You're very welcome!

Correct me if I'm wrong, but don't all rotors have a minimum thickness stamped along the outer circumference of the inner area where the studs go through? Mine do, though I had to scrub them to see it. I measured them with a dial caliper. Something like 21mm minimum thickness for mine and I was at 22-23 as I recall.

A really good video. Great info for inexperienced shade tree mech like me

@BudgetMechanicHawaii

6 ай бұрын

Glad it was helpful!

@thehouseofronin9209

6 ай бұрын

@@BudgetMechanicHawaii definitely 👍

Great content mate…. Your video is very informative

I not only subscribed , but clicked for every notification. I just bought a car and as you know , they’re quite an investment. Your videos are informative and helpful.

@BudgetMechanicHawaii

2 ай бұрын

Thanks!

It’s funny that this video was just recommended to me. Last week I was getting a transmissible fluid change and the shop recommended new rear brake pads. I denied the service because I planned to do it on my own… when I dug in and removed the pads they were worn to about 50% compared to the new pads I bought a while ago when I heard the squealing that turned out to just be a bent pad insulator. This was a respected independent shop… so they at least offered a reasonable price on the work, but still.

@BudgetMechanicHawaii

7 ай бұрын

Still… diy!!

Truth at last. Subscribed.

@BudgetMechanicHawaii

5 ай бұрын

Thanks!

Great vid, I started doing fixes myself on my girlfriends vehicle an she hasn’t had her brakes changed once an it’s sitting at 104km driven. I’m about to take the wheel off an see how bad the damage is. Thanks

great info video ... !!!

Thank You so much ❤

GOOD JOB

I teach for a living, & I can say you are a great teacher. Thank you for this video.

Thanks for your video

@BudgetMechanicHawaii

8 ай бұрын

Most welcome

Thanks Josh. Great job. Good info. God bless. Liked & subscribed.

Great video! Very easy to learn as a beginner DIY'er :)

@BudgetMechanicHawaii

2 ай бұрын

Glad you think so!

Here in Maine the roads are paved with salt for 5 months. The rotors build up with rust on the inner face long before the pads are worn out. Braking is still fine but you begin to hear a grumbling sound, and feel it, when braking. Seems the outer surface always looks fine. I am always shocked when I see how bad the inside looks. Just replaced front pads and rotors on my Equinox, Rock Auto had a good quality rebuild kit (Raybestos)for $150. Just needed a tube of brake grease and some fluid film from local parts store. Took about 2 hours total working on the floor, no lift. I'm 75+ and have done many brake replacements, both front and rear, over the years. Did the Equinox rear with the electric parking brake last year with no problems.

@BudgetMechanicHawaii

9 ай бұрын

Good work!

@mann_idonotreadreplies

2 ай бұрын

Cool story bro

@Fred-mp1vf

Ай бұрын

I'm pretty sure they don't actually "pave" the roads with salt.

Great video.

Thank you sir!!!

Thank you!!!

Thank you!! I feel a lot better when I’m trying to tell them I don’t believe I need rotators. I went to get just front breaks and they told me I need to replace all 4 breaks and rotors.they said they didn’t hear any noise on the test drive. I just don’t understand why they are trying to get me to pay $1000 when I know I don’t need all that. I have experience from my ex teaching me but unfortunately I don’t have the tools now to do it myself. They also said the calipers we broke, however I don’t know much about those.

great advice

@BudgetMechanicHawaii

5 ай бұрын

Thabks

Thank for being fare with all love your video for people like you😂

thank you!

Appreciate you!!

Thank You

My large SUV I just purchased has 6mm on the front pads. I was told I need to resurface my warped rotors on the front and agree. Should I replace the pads at the same time?

Also, from my experience the front brake pads wear out faster then the rear. Most of the time about twice as fast. On my pick up, the rear pads lasted over 100k miles. But I did check them several times.

@jimmywalters3071

Жыл бұрын

I thought the front pads wear out first but my state inspector told me that I should replace my rear pads soon (but still passed me). - as they are almost worn out but my front pads were still okay !! My car is almost 6 years old , bought new - with 125,000 miles on it - never had a brake job done -same pads. Yes, I do alot of highway miles but do some stop and go at times. (2017 Tucson AWD).

@cormorant_on_arock7934

11 ай бұрын

from everyones experience

@user-rg9xd9mu5r

9 ай бұрын

Not just that, but the front driver side tends to wear faster than front passenger side.

Thanks for the great video

@BudgetMechanicHawaii

6 ай бұрын

You bet

Hi Budget Mechanic, Would you advice for a brake fluid change vs a flush when copper leaves are beyond 300?

Amazing

Don' see/ hear anything recently about "turning rotors". Is it an option still? Thanks for the great video. LOVE. PEACE. God Bless

Always use a jack stand! Rotors have a minimum thickness and require replacement if that limit is reached.

@user-rg9xd9mu5r

9 ай бұрын

I like to wear them down to the cooling vanes in the center. I save millions with this simple trick.

love your channel very helpful thank you aloha !!! where in Hawaii you live im from big island Kona side !!! shoots bratha

good video.

Great video, I have never heard an explanation like this! Thank you

@BudgetMechanicHawaii

10 ай бұрын

Glad it was helpful!

Thanks

When I’m inspecting brakes for state inspection, I’ll check and pull all the brakes. If they have hot spots on either pads or rotors, I’ll highly recommend them, cracks fail, 2/32 fail, and if the rivet on the backing plate is below a certain amount, it also fails. With that being said, if the pads have even wear more than 2/32 from inside to outside pad, that fails for state inspection or highly recommend replacing. Hot spots or crazy glazing is highly recommended. If pad to rotor doesn’t have much contact, it’ll fail state and/or highly recommend if it’s not coming in for state inspection.

nice vid, only thing u missed was retracting the piston and making sure the slide pins move freely.

Terrific and informative video. I wish, however, you had also touched upon the concern of the front brake pads on the Chrysler van wearing so unevenly.

Great video and channel. Cheers. 😊

@BudgetMechanicHawaii

5 ай бұрын

Thank you! Cheers!

Thank you! Just wanted it explained to me simply. Tired of them handing me $2000 estimates and I don't trust them.

@samfeldman1508

6 ай бұрын

$2000? I’ll opt for the accident.😜🤪

Nice video.

I generally get 30-35k miles from a set of front brake pads, that’s doing mixed city & urban driving.

@BudgetMechanicHawaii

6 ай бұрын

That’s great!

there is an easier way to have a rough idea as to how your brake pads are. check your brake fluid level, unless you have a leak which could cause the brake fluid to drop quickly the fluid level will slowly go down due to the fact that as the brake pads wear brake fluid is displaced from the resivour to the brake caliper. If the level is low take time to get brakes checked. Also if you run in for oil changes and as a matter of service your levels are "topped up" remember that the mechanic when changing your pads will have to press back the piston into the caliper, again now moving that displaced fluid back to the resivour. If the fluid has been topped it may spill over due to increased amount . Brake fluid is bad for paint.

Thank you so much!!!! Incredibly helpful video❤️

Great video

@BudgetMechanicHawaii

8 ай бұрын

Thanks!

Thank You , for sharing your Knowledge ...

@BudgetMechanicHawaii

10 ай бұрын

My pleasure