√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

Thank you so much for this video! I love the way you explain the steps as you go and also throw in some useful tips. I'm trying to save a little money by replacing my rotors myself (I figured it wouldn't be as easy as taking off the old and slapping on the new) but with the step by step instructions in your video I'm now confident enough to tackle the task in my boyfriends absence. You rock man! Thanks again! (:

@1AAuto

5 жыл бұрын

+Michelle F Thank you for your feedback! We are happy we could help.

It really helped me a lot. First time DIY but had lots of confidence due to the detailed video. Car brakes like new, so satisfying!! Thanks a lot.

Very good. I love your detailed and thoroughly explained videos. Thanks!

Excellent video, step by step instruction, a baby can understand it. Thanks so much!!!!!

excellent video. thks. only thing I might add is that the two rotor screws are optional. just in case they are missing or damaged you can do without them.

@1AAuto

5 жыл бұрын

+knik nayme Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@southpark159753

3 жыл бұрын

Yep just installed on the line at the factory so the rotor doesn't fall off before the end.

man!! you make me think I can do this!!! very thorough and step by step!,

Thank you very for such a detailed video. I was able to change my own brake pads!

@1AAuto

4 жыл бұрын

+sLiCkLaW Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

Thank you for your demonstration

this video was super helpful 100/10

Good Work Bro Very Smooth Explanation

Thanks a lot! Great vídeo.

@1AAuto

6 жыл бұрын

+Arroz con carne frita y tajadas Thanks for watching. 1aauto.com

Very helpful thank you very much

Excellent! Love it.

@1AAuto

6 жыл бұрын

+Hoa Ly Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

There are two lengths of bolt for calliper bracket. Does the longer one go up or down?

really great video, thank you

Hello, I followed every step in your video to the "T". However, after the job was complete. I went to build up the brake pressure with the car off and achieved pressure, but as soon as I turned the car on to test drive it, the brake pedal went to the floor...any tips would be appreciated. Thanks

@1AAuto

5 жыл бұрын

+Bleew86 Since there could be multiple reasons why you’re experiencing this difficulty with your vehicle, I strongly recommend that you have a reputable mechanic inspect it. They’ll be able to troubleshoot the problem and tell you what part or parts you’ll need for the repair. Since we do not have access to the vehicle we would not be able to diagnose this with any accuracy

if I'm not changing the rotor, do I still have to remove the caliper bracket? Because last time I did this job, I never removed it

@1AAuto

6 жыл бұрын

+Rob M. If you are just changing the brake pads you should be able to just remove the caliper and change the pads. Hope this helps you out. 1aauto.com

@fivesurfers

6 жыл бұрын

Thank you for your prompt response, I'm still new at this

@rjvw3078

6 жыл бұрын

I just take off the 17 mm bolts.

A 2 door 2005 Hyundai Accent has no top hex head bolts on the front calipers, it's a round pin.

Very nice !

by the way you need 14mm socket instead of 17 mm

very good

@1AAuto

7 жыл бұрын

+عمار الناصري Thanks for watching 1aauto.com

Thank for this video

@1AAuto

5 жыл бұрын

+amin naser Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/2006-11-hyundai-accent-kia-rio-brake-pad-and-rotor-kit-front-nakamoto-cd1156%2c-517121g000/i/1abfs01481?KZread&CTA+Comment&E-AXUDl9Hpo

Is there a way to make you guys ship this in the Philippines?

@1AAuto

3 жыл бұрын

+Nasabe Franz Thanks for checking us out! We do not currently offer to ship internationally.

You didn't grease the sliding pins

Thank you for the video, but @ 9:50 you make a huge mistake. The break fluid in the caliper is degraded and possibly contaminated and you do NOT want to push all that fluid back into the system. You gotta open the bleeder valve, and push it out of the system. Then top up the reservoir and bleed.

Thank you for this video ! But I have a question, What c clamp would I need to buy since there are different sizes !!

@oh_really_tho

3 жыл бұрын

If you go to an auto ports store you can also buy a disk brake spreader, cost like 12 bucks and you use it like you would a c clamp, one size fits most

@southpark159753

3 жыл бұрын

You can also "rent" that part at most auto part stores if needed. The caliper spreader.