No video
HOW TO REPLACE DRUM BRAKES| 2014 Hyundai Accent gets a New set of Brake Drums & Shoes!
Installed a whole new set of rear Brake Drums on my 2014 Hyundai Accent!
Let me know in the Comments below if this video helps you out!
Be sure to check out my other videos in this playlist more Hyundai "How-To's" to come!
• HYUNDAI ACCENT HOW TO's
SUBSCRIBE and turn on that bell notification so you don't miss any upcoming upgrades!
/ everythingavron
FOLLOW ME on Instagram: / everythingavron
ADD ME on Facebook: TheEvery...
LIKE & COMMENT BELOW! Always open to ideas and feedback on what you'd like for me to work on next!
Пікірлер: 66
That was one of the best how to videos I've seen on this particular job. Thanks
@EverythingAvron
3 жыл бұрын
Thank you, Glad you enjoyed it!
You saved my life.... Thanks! Reminded me of why I hated drum brakes.. Took 2 hours to do 1 side and 15 minutes on the other..
@EverythingAvron
10 ай бұрын
Drums hold a special place in my heart! Haha especially when they are seized on there a bit lol
Very good video, people will be using this for a long time! I would like to add one thing. Pay attention to the bottom ears on the shoes and make sure they get and stay behind the holder. If the bottom spring is loose check and make sure they are in place.
One helpful tool to take the springs on or off was a pair of Needle-Nose ViseGrips. I have a large pair and a small pair. In this case, I used the small Needlenose Vise Grips and taking the springs on or off was easy.
EA - Thank You so much for a helpful, informative video! I have a 2019 Elantra SE and now that the warranty has run out I am doing most of the repairs & maintenance myself. Despite all the Auto Parts sites (Rockauto, Amazon, Oreillys, Advance, Autozone, etc) saying my car has rear disc brakes, I jacked up the rear, took off the wheels and found DRUMS!! I had never done Drum Brakes before so I stopped what I was doing and put everything back together. Despite viewing over a dozen YT videos on doing Drum Brakes, none showed the details of what i would run into with Hyundai Rear Drums. But YOUR video here is the only that shows what I will run into. Again, thank you. If I ever meet you, I'd be honored to shake your hand and first round is on me. Throughout your video it was loaded with good advice. Take lots of close-up pics for orientation, how-to's, etc. The main thing that threw me off before I found your video were the Shoe Hold Springs & Pins. But now I know how to deal with that too! The only thing I am fixing to do different from your video is I ordered an 8-piece Drum Brake Toolkit from Amazon for $33. It had the most ratings, with a 4.5 star rating. Once Saturday rolls around so I can start early and take my time, I'll jack the car up and get back to it. I subscribed to your channel and I'm looking forward to seeing more Hyundai stuff.
Excellent video, informative and entertaining. I had discs on my back wheels, but this is super helpful in understanding the parking brake on my Sonata. Thanks
that was awesome, I dug into these brakes last night, and missed the spring on the adjustment lever, great production!!!
Thanks man! Really helpful. Made this easier than I expected. I have a base model 2014 Elantra which is the same system as your Accent. And thanks to the helpful comments and advice family. Cheers.
Here is the million dollar question. I installed my new shoes and it was a struggle to get my drums back on even with the adjuster rod set at zero. How much of this is because of new equipment needing to be broken in or how much of it is because something might be on incorrectly.
Never showed how you put the spring back on the lever,
@foosblood24
Ай бұрын
Exactly!
Awesome tutorial! Was able to attack it for the first time with confidence after watching this video and did one side in under an hour (including set up)! Not bad for my first time on drum brakes.
Meanwhile, I have run into a big problem. On my Hyundai 2019 Elantra SE the rear drums have two flathead drum bolts holding the drum onto the rest of the brake assembly. I had to use an Impact Driver and Liquid Wrench penetrant to remove the bolts. But the real problem was putting the drum back on after installing the new pads. I was able to get the drum on somewhat easily. And the drum would turn with just a tiny bt of drag. THat is no problem because the drum brakes will self-adjust after slamming on the brakes while in Reverse. But here's my main problem now - when I screw the flathead bolts back onto the drum, the drum wont turn at all! What the heck?? Loosen the bolts a tiny bit, the drum turns. But tighten them down, the drum wont turn. I'm taking a WildA$$ Guess here at one of two fixes here - 1) compress the cylinder rams all the way in AND/OR 2) adjust the star wheel all the way in so there's no threads showing and it is pulling the pads inwards as much as possible. ANyone got any ideas? I could really use some, especially since I blew out an o-ring in my lower back and my muscles are in spasm. Its making things pure hell right now.
@100FFC
Жыл бұрын
Next Day Update: back still blown out. But yesterday with the help of a fishing buddy the brake drum problem was solved. The lower tab where the small spring holds together the two lower end of the brake shoes had one brake inside the tab as per spec. But the rear brake shoe was just outside of the tab, making the side of the shoe stick out too far and preventing the wheel from turning.
Great video overall. Except one thing seems to be missing. The part on how to get the E-Brake back onto the shoe. Dang that's a pain!
Bro, I have never watched a instructionale video that was good and funny at the same time.
@EverythingAvron
2 жыл бұрын
I appreciate that! haha... kinda making it my style of video.
Great video super helpful, probably will watch it 4 or 5 times doing my first brake job, thanks.
I screwed mine all up. First the pads were completely crumbled. 2nd I didn't take any pictures. Third I got it apart and the adjuster cam was broken on one end. I'm punting and have a shop do it for me. the adjuster cam is on the other coast too. Great video.
@EverythingAvron
3 жыл бұрын
dang that's intense... Overall I absolutely hate drum breaks.. First chance I get, or if I find one in the junk yard.. Im taking the rear training arm assembly off of a Hyundai Accent that has Disc brakes! They aren't too common and are the top trim level. But I will find one one day!
This is the best video I've ever seen on drum brakes
Wow. That was a GREAT video! You covered EVERYTHING! Every other video I watched on this had lots of "magic" in them. "Alright, just tap the drum a bit between the lugs....." and POOF! Meanwhile it appears to be eight hours later, and the guy is all out of breath.
@EverythingAvron
2 жыл бұрын
thank you!! and most breaks may not come off that easy. Depends upon how good of shape they are when you get the vehicle, which these probably weren't ever looked at. haha But we got 'er done!!👍
Agree that it was a great video, especially with the installation. Something to add though. The handbrake shoes is different, depending on the passenger side and the driver's side. The "wrong" shoe will not install at all on the wrong side. 2. Once both shoes have their clips and before attaching the holding springs, try using a g clamp to to hold the shoes together. (If you not have a G clamp, then use string or a thin rope to hold the shoes together. There is a spring in the slave cylinder that pushes the shoes apart. Only when the shoes fit snugly together can you check/know that the adjuster is installed correctly. If the adjuster is not installed correctly the handbrake with not work! There is also a good chance that brake flued might leak into the drum area and come on the drum surface. The only way to know to do something right is by doing it wrong!
Hey Junnie, man I haven,t done mech brake since 77, man I forgot, OK, good job, like a pro, all you have to do is road test, and it, over, Thank a lot, seeing you it all came back............be safe, BB
thanks, great job. the nuts adjuster ,1 is left hand the other right hand,I keep on forgetting which is which. Do you remember?
@EverythingAvron
2 жыл бұрын
Ooo dang I don't remember haha Ill have to re-watch my video again to see if I can remember
Mann I did mine today Tks for your video my parking break was cool I didn’t have to mess with the parking brake
@EverythingAvron
3 жыл бұрын
your welcome! glad it helped
Thanks it was very helpful
@EverythingAvron
Жыл бұрын
You're welcome!
Great video thanks for the step by step information, it helped me a lot
My Accent is a 2006 but I think the process is the same. Actually, the car looks more like a 2005. If I order parts for a 2006 they're always wrong. I think they had some 2005s left over, dressed them up a bit, called them "sport" and sold them as 2006s. I'm okay with that. I love that little car.
Great video! Thank you!
@EverythingAvron
3 жыл бұрын
Thank you! Glad you liked it!
Yeab just like that until you can't get the fucking top spring on
Think you could get the wheel hub off without messing with the shoes? I have to change a speed sensor that sits behind the hub. :(
How do you put the e brake cable back on?
How do you put the e-brake cable back on? The one part of this tutorial that is absolutely necessary and you skipped it!
I ve broken one of the 4 screws/bolts that hold the tire. Do you know how to replace it?
At what mileage should brake drum be replaced ??
Thank you. Very helpful
@EverythingAvron
Жыл бұрын
You're welcome!
similar 2006-2011
@EverythingAvron
2 жыл бұрын
Yes should be very similar to 2006-2011... In general most Drum brakes on any vehicle are extremely similar if not identical. Most of the times, the sizes is what varies.
He's not a professional which is why it's excellent.. Explains and shows how to with all the same mistakes we would make...
Great job man
@EverythingAvron
3 жыл бұрын
thank you!
Good job bro!
@EverythingAvron
2 жыл бұрын
thank you! glad it helped
I can’t Push back the emergency break spring any suggestions???!!
@EverythingAvron
Жыл бұрын
Probably a little stiff... have another set of hands with pliers hold one side and you the other....But, you'll have to get that bad boy off to get that shoe.
Where did you get a book to show how to do the repair
@EverythingAvron
3 жыл бұрын
just googled it online, this is what I found www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwj264qludTuAhWTtJ4KHcyhCF4QFjAEegQIBxAC&url=http%3A%2F%2Fwww.hamanual.com%2Fhyundai_accent_rb_2010_2018_service_manual-314.html&usg=AOvVaw2kIWlZ1ayeK_wr6W5OqaWQ
Blessings ! Awesome video! 💪
Perfecto. good video. 5star
Those screw are the bane of my existence 9/10 gotta drill them out
Great video
@EverythingAvron
3 жыл бұрын
Thanks!
I thought I was the only one who worked in slides on cars lol
Is this similar to 2016 Hyundai Accent ?
@EverythingAvron
2 жыл бұрын
Yup sure is!.. identical if you have the rear drum brakes.
I think you should stick to being just a mechanic,I don't think your cut out for the video aspect of it. Your to long winded and you don't show how to put parts back, they just magically appeared to be replaced.
terrible example on removing break line.