I show how to replace many suspension parts on this 2005 Volvo S60 Non-Turbo (but I believe it doesn't matter if it is a turbo). I Install PDI's heavy duty parts
you can find most specs at www. matthewsvolvosite.com
here are a few specs i found. please double check for your self, because in the video some of the specs might not be correct. always check for yourself. i am not responsible for incorrect information. thank you.
torque specs :
drive shaft (axle bolt) stage one torque to 35 Nm
stage 2 tighten/rotate 90 degrees
ball joint in control arm aluminum stage one torque to 50 Nm
stage 2 tighten/ rotate 40 degrees
steering arm/tie rod end in wheel spindle steel: torque to 70 Nm
(if aluminum) stage one torque to 50 Nm
stage 2 tighten/rotate 40 degress
anti roll bar link to spring strut torque to 50Nm
anti roll bar link in anti-roll bar front torque to 60 Nm
brake caliper to in wheel spindle torque to 100 Nm
lock nut outer steering joint against inner steering joint toque to 70 Nm
tie rod ball joint to steering gear torque to 10 Nm